Related
Hi,
Thank you for all the person here who helped me revert my phone to stock rom.
You're really the best.
Now I have my LG Optimus 2x SU660 to Gingerbread 2.3.4.
But now How can I root it?
I found a thread that they have rooted it with nvflash and CWM, but unlucky there is no Guide.
Hope someone knew how it can be done.
Thanks,
confirm ur version v20f? if f version i think still not yet rooted unless a custom rom...
Is there a custom rom of gingerbread for SU660?
kitty's_daddy , can you download this custom rooted rom based on 2.3.4 v20f for su660? http://115.com/file/aqz691r6
and upload to mediafire for us, pls
this is post:
http://bbs.gfan.com/android-2707996-1-1.html
chimbuon said:
kitty's_daddy , can you download this custom rooted rom based on 2.3.4 v20f for su660? http://115.com/file/aqz691r6
and upload to mediafire for us, pls
this is post:
http://bbs.gfan.com/android-2707996-1-1.html
Click to expand...
Click to collapse
Hey, guys.
This is not a custom rom.
It's only rooted official GB stock (v20f)+1.5 OC kernel+some tweaks nandroid backup.(on su660)
You can use this if you have su660.
Restore only boot & system with CWM's advanced restore.
You need not to wipe.
(But you have to backup for undoing always. Some ppl can't boot with OC kernel caused by low level board.)
Then you will have rooted GB 2.3.4 stock+1.5 OC kernel rom with your data.
But time will be faster 9 hrs than it caused by different baseband.
You can set time manually at setting .
Official updater doesn't extract *.fls any more. And I can't give you baseband.
---------- Post added at 12:41 AM ---------- Previous post was at 12:12 AM ----------
To root v20f is not simple and has risk.
Because of it has locked bootloader.
It needs definite understanding of nvflash and smartflash for undoing.
I can't this explain.
If you have Korean friends, request him to explain this.
He will have to register unless he has ID at Naver.
would u mind uploading to mediafire pls?
thanks in advance...
chimbuon said:
would u mind uploading to mediafire pls?
thanks in advance...
Click to expand...
Click to collapse
What's you want to upload?
Nandroid backup is at here.
iS it ur rom? v20f ?
i already try to restore ur rom but unsuccessful, it 's aborted...
chimbuon said:
i already try to restore ur rom but unsuccessful, it 's aborted...
Click to expand...
Click to collapse
You have to use Paul's modded cwm 3.0.1.5 or 4.0.0.5 .
Refer to this.
Hi,kitty's daddy
I followed your instruction but i can not install cwm 4.0.0.5 in my su660. Are you sure its working with su660 2.3.4 ?
tahnks
ganaa said:
Hi,kitty's daddy
I followed your instruction but i can not install cwm 4.0.0.5 in my su660. Are you sure its working with su660 2.3.4 ?
tahnks
Click to expand...
Click to collapse
I'm using 4.0.0.5 in my gb 2.3.4.
But it's rooted.
I can't explain to root gb.
It's very complex.
sorry.
Sent from my LG-SU660 using XDA App
What's you want to upload?
Nandroid backup is at here.
---------------------------------
Then how i can use your a.m backup ? Sorry
ganaa said:
What's you want to upload?
Nandroid backup is at here.
---------------------------------
Then how i can use your a.m backup ? Sorry
Click to expand...
Click to collapse
It can be used on rooted phone.
You can't use that on unrooted gb 2.3.4 (v20f).
It needs CWM.
If you want, flash v10w or before with smartflash.
(But all user data will be wiped and kdz tool can't downgrade from v20f.)
And root & install CWM than restore that with CWM.
I don't recommend that.
Wait who will explain to root v20f. It's not long time.
I have uploaded that for p990 users, I couldn't think about su660 users in here.
thank you , as i understood all i need is v20f - - v10w-- root-- cwm---rooted v20f, right?
ganaa said:
thank you , as i understood all i need is v20f - - v10w-- root-- cwm---rooted v20f, right?
Click to expand...
Click to collapse
Right.
And if you downgrade to v10w from v20f though full wiped,
the time will be faster 9hrs due to difference of basebands.
Then you may set manually at setting.
Also you may set cpu clock with setcpu or cpumaster because of it has 1.5OC kernel.
Good luck.
To root V20F (has locked bootloader.)
Hey guys.
This is what you want. But try at your own risk.
step1. Download this su.zip
step2. Copy it to your internal or external sdcard. (depending on what you normally use)
step3. Read and inwardly digest this and download it.
step4. Install cwm to recovery according to that post.
step5. Boot with cwm recovery and install su.zip.
step6. Reboot and enjoy.
step7. Admire Rusty!
Add.
Never do this try without
any backup.
any knowledge about unbriking with kdz tool or smartflash.
understanding about details of Rusty's post.
doing battery out.
do you have official v20f be rooted?? thankS
chimbuon said:
do you have official v20f be rooted?? thankS
Click to expand...
Click to collapse
Yes. It's an official v20f.
Sent from my LG-SU660 using XDA App
unfortunately Rasty CWM does not work with unrooted Su660.
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.
wic android version of gingerbread do you have on your phone..
sorry for asking again...
CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--
even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??
Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep
can you suggest any app for checking it??
How to flash the official ICS im from INDIA i want to flash ICS released by sammobile. .
Please guide me how to flash my note is running cm9
Keep cm9
Inviato dal mio GT-N7000 con Tapatalk 2
Moved To Q&A
Please post questions in the Q&A section
Use Mobile Odin Pro (Support Chainfire!!!)
I feel sorry for you moderator. But i told you so. When real ics comes noone is going to use your sticky thread. Good luck deleting al those ussles threads that are made before reading one thread that will help.
srinivas07 said:
How to flash the official ICS im from INDIA i want to flash ICS released by sammobile. .
Please guide me how to flash my note is running cm9
Click to expand...
Click to collapse
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
vijai2011 said:
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
Click to expand...
Click to collapse
hey i have the Chrack ROm v18 XXLC1. and of course my phone is rooted. can i just upgrade to this rom using Odin or will i also have to go back to some stock rom and then flash this rom. can u pls pls tell me i will be greatful to u for ur help
aami.aami said:
hey i have the Chrack ROm v18 XXLC1. and of course my phone is rooted. can i just upgrade to this rom using Odin or will i also have to go back to some stock rom and then flash this rom. can u pls pls tell me i will be greatful to u for ur help
Click to expand...
Click to collapse
Replied to your PM
custom ics u mean tw based?
vijai2011 said:
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
Click to expand...
Click to collapse
th rom ur talking abt is tw based? vl it hv premium suite apps?
What I recommend, based on what I did:
- Download the leaked German official ROM (about 600-700Mb), .tar.md5 file and put into your phone's sd-card.
- Install Mobile Odin Pro from Play Store (need to pay. there's free version too, but I suggest you pay for Pro, safer).
- In M. Odin, open the .tar.md5 file, and press flash. (if you don't mind wiping, best to also check the wipe options).
I didn't wipe, and then it couldn't boot.
So I booted into recovery, and wiped data/factory reset and cache, then it booted fine.
Still had root.
Then I installed CF-Kernel. Go to the Dev thread and scroll down till you see the GT...LPY version and download that zip. Unzip to take out the .tar file, copy to sd-card.
Use Mobile Odin to open it, and then flash. It will flash the kernel, and then you will have ClockworkMod recovery so that you can backup/restore ROMs again.
(Note: You can actually do the above in one single step, but opening the CF kernel file after you open the ICS file, so that everything else points to the ICS file except the kernel points to CF Kernel.)
Hit the THANKS button if this helps any of you!
We're seeing tons of same question today..
Here's my instructions for stock ICS (no root, no Mobile Odin Pro required, no money required):
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
hp79 said:
We're seeing tons of same question today..
Here's my instructions for stock ICS (no root, no Mobile Odin Pro required, no money required):
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
Click to expand...
Click to collapse
emmm it is suitable if you have gb on your phone, if you have ics repacked rom, you will get brick
EdgaBimbam said:
emmm it is suitable if you have gb on your phone, if you have ics repacked rom, you will get brick
Click to expand...
Click to collapse
Really? I thought PC Odin will completely overwrite everything using the stock image.
Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
First ICS for Note
N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany posted to OP
This is Non Wipe version
Installation note : How to update from GB ROM to ICS
Install using Mobile Odin safely
- Download N extract ROM
- Copy Extracted file to a folder e.g ICS ROM On Ext/Int SD card
- Download CF Root for LPY
- Extract CF root till get zImage file
- Copy zImage file to same above said folder in SD car
- Open Mobile Odin
- Select 'Open file' N point to ROM file
- select Kernel tab N point to zImage file
- select Ever Root option
- Flash
- You will get ICS ROM + Root + CWM
Click to expand...
Click to collapse
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208
marco2082 said:
Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208
Click to expand...
Click to collapse
hmmm i had ics repacked rom, and went to gb to be 100% safe and flashed without problems, maybe you should go to gb and then flash ics?
GB bro
Sent from my GT-N7000 using Tapatalk 2
But that's so much work...
Download still walkin' to my home... pretty loaded I think... Let's see if someone else has some experiences with imilka
marco2082 said:
But that's so much work...
Download still walkin' to my home... pretty loaded I think... Let's see if someone else has some experiences with imilka
Click to expand...
Click to collapse
hmmm if you want to risk and lazy to do a bit longer way- your choice ;D
EdgaBimbam said:
hmmm if you want to risk and lazy to do a bit longer way- your choice ;D
Click to expand...
Click to collapse
Haha, ye... ok true.... tell me what rom did you flash? and trough mobile odin?
marco2082 said:
Haha, ye... ok true.... tell me what rom did you flash? and trough mobile odin?
Click to expand...
Click to collapse
i had criskelo rom ics v2, restored my rocket rom backup with 4.2 abbys kernel help and from rocket rom flashed without problems LPY firmware
Same boat
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...
Carysyd said:
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...
Click to expand...
Click to collapse
emmm if you flashed ics repack lp1 then flashed cm9 then you dont have bootloader i9220 ^^ if you flashed chainfire LP5 repack, then you will have bootloader i9220. Only chainfire LP5 repack has bootloader i9220
Just flashed it using Mobile Odin Pro, the process was very smooth.
Sent from my GT-N7000 using XDA
marco2082 said:
Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208
Click to expand...
Click to collapse
Carysyd said:
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...
Click to expand...
Click to collapse
I took the plunge from imilka v3 CM9 and followed dr.Ketan's steps, and it worked flawlessly. Note though that I did have to do a full wipe to get past the Samsung boot screen, but outside of that, I restored a previous backup of my apps through Titanium, and all is well.
I do miss my AOSP apps, look and feel, but it's nice to have all functionality work as expected with the stock rom.
Hope this helps!
Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda
abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM
its working .....
----deleted----
the file has been deleted, can u re-upload it..
thanks
[ROM]
----deleted----
Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot
----deleted----
aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast
aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards
Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app