[Solved]Samsung KIES fails to start. - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

On my laptop, Samsung KIES fails to start at all. It shows up a silver splash screen then a square black window followed by an error message - "Kies has stopped working".
I'm on windows 7x64, Samsung laptop RF411, Kies version 2.1.1.11124_17_6 downloaded from the Samsung website. Application runs as administrator.
Anybody else have this problem?

bloodyhippo said:
On my laptop, Samsung KIES fails to start at all. It shows up a silver splash screen then a square black window followed by an error message - "Kies has stopped working".
I'm on windows 7x64, Samsung laptop RF411, Kies version 2.1.1.11124_17_6 downloaded from the Samsung website. Application runs as administrator.
Anybody else have this problem?
Click to expand...
Click to collapse
Try Installing in Windows Xp Service pack 2 Mode.

ranjan.alva said:
Try Installing in Windows Xp Service pack 2 Mode.
Click to expand...
Click to collapse
Tried that already, no luck.

bloodyhippo said:
Tried that already, no luck.
Click to expand...
Click to collapse
You have already installed Kies or while installing its not responding??
Even am using it on Win 7 x64. but no issues with Kies.
Uninstall previously installed Kies completely then try installing.

Kies installs fine, it just won't start. I figured it must be just me, because I searched around, and I haven't seen this occurring with anyone else. I tried all that, everything short of formatting my machine. I guess a clean install of Windows would do the trick.

Moved To Q&A​
All questions in the Q&A Section Please!​

bloodyhippo said:
Kies installs fine, it just won't start. I figured it must be just me, because I searched around, and I haven't seen this occurring with anyone else. I tried all that, everything short of formatting my machine. I guess a clean install of Windows would do the trick.
Click to expand...
Click to collapse
Are you using the OEM Samsung USB cord? For some reason, The I-727 Skyrocket won't start Kies without the original cord being used! It's worth a try if you were using an aftermarket cord.
Sent from Samsung Galaxy II SR via Tapatalk

tbran said:
Are you using the OEM Samsung USB cord? For some reason, The I-727 Skyrocket won't start Kies without the original cord being used! It's worth a try if you were using an aftermarket cord.
Sent from Samsung Galaxy II SR via Tapatalk
Click to expand...
Click to collapse
I've heard something about the touchscreen being affected while charging with an aftermarket charger, that might have something to do with the cord too. I don't think it should matter in this case, though. Samsung drivers work fine, ADB works, MTP mode works, but Kies won't start with or without the phone connected.
Thanks anyhow

Reinstalled Windows. Kies works now. Mods, please delete this useless thread. Thank you!

For anyone else who has this issue with the crash see: http://ramspensieve.blogspot.com/2011/11/fix-samsung-kies-crash-on-windows-7.html
Forget re installing the os, worked for me, figured I would share.

Related

[Q] [NEED HELP] Samsung Galaxy S NOT Recognized by Windows 7

[FIXED] thanks guys
When I connect my Samsung Galaxy S, the computer doesn't do ANYTHING (it doesn't recognize that anything has been connected), and the SGS doesn't even recognize that it's connected to anything. All the phone does is charge...not even a notification drop down prompts me to enter USB mass storage or charge etc. I've factory reset the phone many times (plugged & unplugged), and nothing seems to fix it. I can't find my SGS in the Device manager to reinstall drivers either.
I am running Windows 7 64bit on a Sony Vaio, if that helps.
I've searched tons of sites & forums and none seems to have a working solution...Any ideas/fixes?
I think I found the problem I was having...I was using a Rocketfish CHARGING cable, and although it looks like a USB cable (it connects to the computer via usb), it does nothing but charge...so I took off the micro usb adapter that affixed onto the mini usb charging cable and re-affixed it onto a random mini usb cable I had lying around. And now it connects to the computer! I can now use all the other tutorials fixing the generic "usb driver not installed properly" problem.
UPDATE: I was following the tutorial on http://theunlockr.com/2009/12/02/how-to-root-the-samsung-behold-2-samsung-galaxy/ but when I get to the fastboot part, my phone won't boot into fastboot.... Can anyone help?
download 64-bit drivers here: http://forum.xda-developers.com/showthread.php?t=728929
turn on usb-debugging mode in settings. you have to manually choose to mount the volume on the SGS every time you plug it in.
should work.
you need to either install KIES, or install the drivers included in the Android SDK
AllGamer said:
you need to either install KIES, or install the drivers included in the Android SDK
Click to expand...
Click to collapse
I got my phone to connect & be recognized by my computer, but I can't seem to get my phone into fastboot. Can anyone tell me which keys to press...?
I had the exact same problem. Googled and found a forum post somewhere with the following solution:
Turn off Galaxy S. Connect to pc by USB. Turn on Galaxy S.
...
Yeah.
Worked for me, anyway. Ever since I did that it's been working fine even if I connect it while it's turned on.
EDIT: Gah, didn't notice you had it solved already, thought the second post was from someone else. Oh well.
Zavonn said:
I got my phone to connect & be recognized by my computer, but I can't seem to get my phone into fastboot. Can anyone tell me which keys to press...?
Click to expand...
Click to collapse
steps to get into those boot modes
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/GT-I9000M
I can't get mine to connect using the above methods to windows 7 - windows 7 says it cannot install the MTB drivers.
gladman said:
I can't get mine to connect using the above methods to windows 7 - windows 7 says it cannot install the MTB drivers.
Click to expand...
Click to collapse
Uninstall/reinstall kies.. Under kies, repair drivers.. Worked for me
Thanks. I didn't even know what kies was til after I wrote that.
Sent from my HTC Desire using Tapatalk
Spitfire128 said:
I had the exact same problem. Googled and found a forum post somewhere with the following solution:
Turn off Galaxy S. Connect to pc by USB. Turn on Galaxy S.
...
Yeah.
Worked for me, anyway. Ever since I did that it's been working fine even if I connect it while it's turned on.
EDIT: Gah, didn't notice you had it solved already, thought the second post was from someone else. Oh well.
Click to expand...
Click to collapse
didn't work
Use the cable that came with your phone. I had issues with a second cable I bought for my second pc. Changed the cable back and everything was fine.
thegangsta said:
Use the cable that came with your phone. I had issues with a second cable I bought for my second pc. Changed the cable back and everything was fine.
Click to expand...
Click to collapse
For all, there has always been a problem with sammy usb cables/ports, so when connected up to pc, always take care not to knock phone, this will become especially important when you connect to odin if you get into rom flashing
Insanity cm 014/glitch
Samsung Galaxy S EPIC not recognized by win 7 computers
Pls install Android SDK .It may require you to install java jdk .Then install the samsung drivers for 64 bit install 64 bit drivers ......32 bit won't work. & use the genuine samsung cable. No need of powered hubs or desktops instead of laptops. It will work. Thanks
Spitfire128 said:
I had the exact same problem. Googled and found a forum post somewhere with the following solution:
Turn off Galaxy S. Connect to pc by USB. Turn on Galaxy S.
...
Yeah.
Worked for me, anyway. Ever since I did that it's been working fine even if I connect it while it's turned on.
EDIT: Gah, didn't notice you had it solved already, thought the second post was from someone else. Oh well.
Click to expand...
Click to collapse
thanks a ton man !!
this issue was getting on my nerves and i googled alot but couldnt find a solution to it...and then i searched on xda ..saw few same issues but the solution didnt work and now when i came here and tried your method..it actually worked though i dont own this phone but your post helped..thanks man

[Q] MTP USB Device won't install on Windows

When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
kashmir83 said:
When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
Click to expand...
Click to collapse
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Aylarth said:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Click to expand...
Click to collapse
Yeah I've tried this package. Same error.
RagnarIceblood said:
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Click to expand...
Click to collapse
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
RagnarIceblood said:
Yeah I've tried this package. Same error.
Click to expand...
Click to collapse
dang... then this is something I cant help in, I'm really sorry
kashmir83 said:
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
Click to expand...
Click to collapse
All I know is that this usb driver package helped me and my gf either, without this pack I got the same error like you did, and since then everything works properly. If this package cant help you then I have to admit this is beyond my knowledge.
Just found our that i left my usb cable at work
Thanks again for your suggestion. I will try this after the weekend.
Aylarth said:
dang... then this is something I cant help in, I'm really sorry
Click to expand...
Click to collapse
Some more info.
The last one is from Event Viewer, where it claims that this version of Windows does not support Windows Portable Device drivers.
What a bunch of bollox, my HTC HD2 synced just fine. Must be Samsung crappy driver I guess.
And yeah, I got v 4.5 of windows installer.
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
RagnarIceblood said:
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
Click to expand...
Click to collapse
huh?.. mediaplayer? wierd solution ..
I had this issue too, on my moms pc.
I installed kies befor plugging my phone to the pc, it worked perfectly then, installed the drivers and all. could not see if you had tried that. so its worth a shot
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
drhonk said:
huh?.. mediaplayer? wierd solution ..
Click to expand...
Click to collapse
Not really, WMP 10 is the one responsible for the stock MTP driver.
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Just a quick note on what I discovered last night when trying to get my SGS connected.
Bluetoothe needs to be off
It has to be using the stock Home screen I was as ever using LauncherPro. As soon as I switched back to stock it connected.
rocketpaul said:
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Click to expand...
Click to collapse
try what I did, re-install WMP 10 (or 11)
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
TeamSancheZz said:
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
Click to expand...
Click to collapse
how do you do that btw?
reinstall wmp11
hey ive got the same problem..
but how do you reinstall windows media player 11 on vista?
AllGamer said:
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
Click to expand...
Click to collapse
Unfortunately, this did not fix it on my droid X

[Q] Galaxy Tab Issue

Not sure when it began but I am unable to connect my tab to any pc. I have tried 4 different ones. It just gives me the error message "usb device not recognized". I have the custom rom from overcome(the latest one) installed. I put the tab in download mode and the same issue remains. I turned on/off usb debugging and it still doesnt work. I even tried the *#7284#. That did not help either. Please help.
Hi..firstly, welcome to XDA Samsung Tablet Forum. I see you already register since Nov 10 but your post so far is only 2 post. So I'm consider you are still newbie (same like me
Anyway, back to your question.
Have you go to samsung webpage and download the kies?
http://www.samsung.com/my/support/d...WDXME&prd_mdl_name=GT-P1000&srchword=GT-P1000
Do that first, after install it, go to >>Tools>>Install driver. Click it.
make sure your tab is connected to your PC via USB.
After you click the install driver, kies will download the driver for you and it will automatically detect your USB tab.
please try.
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
rangercaptain said:
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
Click to expand...
Click to collapse
Is that true?? Mine is W7, but it could not detect my tab. only after install driver it can detect
naimmkassim said:
Is that true?? Mine is W7, but it could not detect my tab. only after install driver it can detect
Click to expand...
Click to collapse
Sounds like a fault with windows. Try running updates or use a registry cleaner/fixer see if that helps.
CCleaner has one.
[EDIT] Ah I misread, looks like you have tried other systems with same issue. Not sure then.
I'm assuming you're not using the same cable with all of them, otherwise you'd want to try a different cable. If you've tried the different cables between the different devices and still the same issue, you might roll one of them back to stock and see if that fixes the issue or not. It's possible you have bad usb ports, but more than likely it's a software issue on the tab.
naimmkassim said:
Hi..firstly, welcome to XDA Samsung Tablet Forum. I see you already register since Nov 10 but your post so far is only 2 post. So I'm consider you are still newbie (same like me
Anyway, back to your question.
Have you go to samsung webpage and download the kies?
Do that first, after install it, go to >>Tools>>Install driver. Click it.
make sure your tab is connected to your PC via USB.
After you click the install driver, kies will download the driver for you and it will automatically detect your USB tab.
please try.
Click to expand...
Click to collapse
Even though I tried this step before, I went though these steps again..and the same problem occurs.
rangercaptain said:
Is your pc windows xp or 7? W7 doesnt need any drivers installed, but W xp needs drivers.
Click to expand...
Click to collapse
They all are windows xp computers. It was working fine up until a few days ago. Then it just stopped working. Im trying to flash back to stock rom just incase some software went haywire but I can't bec odin doesn't recognize my tab
Have you tried a different USB port?
I had the same problem with Odin/Kies. Updated Kies to latest version and reinstalled drivers and works now
muli82 said:
Have you tried a different USB port?
I had the same problem with Odin/Kies. Updated Kies to latest version and reinstalled drivers and works now
Click to expand...
Click to collapse
How about the usb cable? Possibility is high due to cable itself. Since you using the same cable with all PC. You should try to change it.
Sent from my GT-P1000 using XDA App
Bad cable or bad tab. Borrow a cable to eliminate that.
Not sure, When i was reading instruction for how to update with overcome rom it said that if Odin doesnt recognise the tab try a different USB port.

Problem making pc to recognize phone.

Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
rahbert said:
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
Click to expand...
Click to collapse
Have you tried with a different USB cable?
No because i connected succesfully my friends galaxy fit with it, so the cable is not the problem.
thry manualy installing galaxy s drivers on pc?
Uninstall and reinstall the drivers.
Try different drivers.
Make sure you're using a Samsung wrong with the Samsung drivers.
Use a different PC.
Keep trying!
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
rahbert said:
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
Click to expand...
Click to collapse
To try using different drivers you would need to uninstall the current driver.
And just to be sure, you didn't flash to CM7/MIUI recently, not realizing Samsung drivers won't recognize your phone anymore, right? Nexus S drivers for those ROMs.
Its on the original ROM i think. Recently bought it second hand, 1 year old.
I couldn't find different drivers...except 32 bit and 64bit, but they all are the same version. Maybe post a link or something. Mine are 1.4.4.
Firmware version: 2.3.3
Baseband version i9000XXJVO
Kernel Version: 2.6.35.7-i9000xwjvh - CL184813 [email protected] #Dark_core_2.4 Mon May 16 15:02:38 EEST 2011
Build Number: DarkyRom JVH v10.1
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
rahbert said:
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
Click to expand...
Click to collapse
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
upichie said:
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
Click to expand...
Click to collapse
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
rahbert said:
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1347899
upichie said:
http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
rahbert said:
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
Click to expand...
Click to collapse
Throw it against the wall then. You ask us for help, disregard all of it, and then update us on what the service desk told you. If you will only listen to them, then don't ask us, kay? Appreciated.
Hi, there.
Actully, the rahbert's question is not bad. How can i use Mobile Odin if i can't root the device?
Or, how can I root without PC? Is it possible? I have exactly the same problem:
Nexus S (I9020), ICS 4.0.4(stock). When I plug the device: the error is reported(Code 43).
Should I try wipe data/factory reset? I really don't want to do this, because there is another good question: How can I fully backup my data(Titanium and so on) without root access? Can you suggest me something? Thanks.
Herman76 said:
Have you tried with a different USB cable?
Click to expand...
Click to collapse
Changing the USB cable worked for me. Thanks!!

[Q]

Well, my problem is that my phone won't recognize any computer as a computer, but only as a source for battery charging. when i plug it into a computer the battery starts charging but i don't get the USB sign.
the thing is that it used to work. i usually just pluged the phone in and it would work, and suddenly out of the blue it stopped working and i have no idea why. i've done nothing on the computer between the last time it worked and the time it stopped working, i wasn't even using the computer during that time, so it must be something on the phone settings, but i checked it a little and found nothing that looks like the problem, but i rly don't understand much about it..
any ideas?
It sounds like a driver issue.
If you're using a Samsung firmware, reinstall the drivers. This can be done by finding them online, or by installing Kies. If you're using CM7/Miui, Samsung drivers won't work. You'll need to uninstall Kies (or kill the process to make sure it's not running in Task Manager) and then install the Nexus S drivers. Again, a simple search will provide the files you need.
If it's not a driver issue, I really don't know what it could be. But I would definitely try reinstalling the appropriate drivers first.
Go to Settings>Applications>Development and if USB debbugging is flagged,deflag it!
upichie said:
It sounds like a driver issue.
If you're using a Samsung firmware, reinstall the drivers. This can be done by finding them online, or by installing Kies. If you're using CM7/Miui, Samsung drivers won't work. You'll need to uninstall Kies (or kill the process to make sure it's not running in Task Manager) and then install the Nexus S drivers. Again, a simple search will provide the files you need.
If it's not a driver issue, I really don't know what it could be. But I would definitely try reinstalling the appropriate drivers first.
Click to expand...
Click to collapse
I'm using a samsung firmware and i installed kies recently, though even after i installed it, the USB connection was still working for i while until it stopped.
should i reinstall the kies?
Nezys said:
Go to Settings>Applications>Development and if USB debbugging is flagged,deflag it!
Click to expand...
Click to collapse
It was deflagged, but thanks anyway
abialystok said:
I'm using a samsung firmware and i installed kies recently, though even after i installed it, the USB connection was still working for i while until it stopped.
should i reinstall the kies?
It was deflagged, but thanks anyway
Click to expand...
Click to collapse
Try with a different USB cable.
Sent from my GT-I9000 using Tapatalk
Try to reinstall Kies or one of the steps that I've read here:
http://www.androidgalaxys.net/suite...problemi-connessione-collegamento-usb-galaxy/
Translated:
Make sure you have installed the latest version of Kies (currently 2.0.1).
For owners of Windows Vista / Seven Kies launch in admin mode
Connect your phone to your PC using the default launcher from Samsung (TouchWiz)​​. Alternative launcher may not be recognized by Kies. Close any programs in the background on your phone and PC.
Make sure that in Settings> Wireless and Networking> USB Settings is selected Samsung Kies or Ask the connection.
If you already selected, try to choose any item and then set one of the two mentioned.
Try using another USB port on PC. Not all USB ports may be able to deliver the power needed to power the device.
Restart both the phone and your PC.
Try reinstalling the drivers of the Galaxy. To do this open Kies, go to the Tools menu and then install drivers.
Try using another USB cable.
ok, I tried everything but switching cable coz i know it works...
here's the weird thing: I tried connecting my phone to 3 different computers, 1 worked and the other 2 (including mine) didn't work.
the thing is that the other computer that didn't work and the computer that did work never touched a Samsung before, so basicaly i have no idea what would make one of them work and the other not to work.
I'm really confused.
Try going into device manager and see if there are any devices flagged with '!'
If not, find your samsung device from device manager, and uninstall it and delete all drivers, then reinstall them.
Try that. It may just be a windows issue, I've had similar problems before but not even with a phone, but a flash drive.
well, tonight the computer restarted itself because of some updates, now it seems to magicaly work, even though i restarted it before.
i have no idea y it suddenly started working, but i can only hope it wouldn't happen again.
thank you all, you guys are great!

Categories

Resources