Hi!
I'm using CM 7.1.
Are the modems you can download here:
http://forum.xda-developers.com/showthread.php?t=1158783
the same of the corrisponding stock roms (JVU modem --> JVU rom) ?
I'm too noob to post there.... (and considering my question probably this is the right thing!)
Can you use stock modems in CM 7?
In particular I'd like to flash the modem of my italian carrier H3G (Tre) branded stock rom. Can i do that? The rom has code NEJVE.
Would it be better to flash my carrier modem? Since It was modified according to my carrier network, it should work better than the "stock" CM 7 modem.
Am I right?
Thank you!
may be you can : u have to install this zip file in CWM v5+ recovery, but always keep system backup.
download your carrier modem. then extract the modem.bin file from there. then put the modem.bin file into the root of the zipped folder using winrar, and remember do not unzip the file. hope u know how to put the file with winrar. i m also uploading 2 picture for your help.
zamiurratul said:
may be you can : u have to install this zip file in CWM v5+ recovery, but always keep system backup.
download your carrier modem. then extract the modem.bin file from there. then put the modem.bin file into the root of the zipped folder using winrar, and remember do not unzip the file. hope u know how to put the file with winrar. i m also uploading 2 picture for your help.
Click to expand...
Click to collapse
wow nice i didn't know how to create a radio package for the recovery!
Can i also flash it with odin or is it mandatory to do it from the recovery?
are CM 7 modem the same as stock rom modem?
jvk cm 7 is the same as stock jvk modem and the same for the other versions?
Or are cm 7 modem modified some how?
same as stock, just in a different zip.ยจ
I have some modems here perka.zapto.org
I managed to make an update modem package and flash it, with the modem NEJV5 of H3g (italy).
Now let see if it works better!
Related
Hello there guys. I have the following query. I have DDJP6 Froyo with DamianTGO kernel which includes ClockwordModRecovery inbuilt. Now i want to try XWJS3 Doc's Rom which i downloaded from Romkitchen.org . The issue is that the Doc's Rom downloaded with custom CSC and Modem(both India Specific) has an older CSC of DDJG4, which the stock Froyo CSC for India is DDJP5. Now if flashing Doc's Rom will bring the CSC back to JG4(which i think it will,, since it's the WIPE version), how do i update JUST the CSC back to JP5?? I do have the JP5 CSC file as a .tar file. Can i update just that using ODIN without re-partition and leaving Phone and Modem blank?? Or update it through CWM? But how do i make a tar file CWM zip compatible??
If the query, or anything similar has already been posted and answered, kindly give me the link for the same. Thanking you all in advance
Just flash the csc bit through ODIN and leave everything else empty.
Thank You Very Much
snapper.fishes said:
Just flash the csc bit through ODIN and leave everything else empty.
Click to expand...
Click to collapse
I shall get right to it then.. Much Obliged
Just wondering if theres a database or something I'm missing. I've just flashed imilkas CM9 port and am nit in an area with 3G at the moment. I'm worried when I do I won't have it as I've had that issue before so I'd like to have a couple of options I can flash in case. Is anyone aware of anything? I've tried searching but its becoming vary tedious in my phone.
Thanks
GT-N7000 CM9
ZCLP1
XXLB2
XXLA4
Helpful, thanks
@chasmodo... I'm on stunner 4.3... my phone's is not detecting some carriers... flashing these radios will help??? if yes which one should I flash???
kvsandeepreddy said:
@chasmodo... I'm on stunner 4.3... my phone's is not detecting some carriers... flashing these radios will help??? if yes which one should I flash???
Click to expand...
Click to collapse
The first one is ICS radio from the first Chanfire Repack, the other two simple Gingerbread modems. I find that GB ones work better for me on ICS, either one of them. I'd also recommend that modems be flashed using Mobile Odin:
1. extract modem.bin file from zip
2. place it on your SD card
3. start MO
4. tap on 'Modem', navigate to the modem.bin file
5. let MO flash the radio
chasmodo said:
The first one is ICS radio from the first Chanfire Repack, the other two simple Gingerbread modems. I find that GB ones work better for me on ICS, either one of them. I'd also recommend that modems be flashed using Mobile Odin:
1. extract modem.bin file from zip
2. place it on your SD card
3. start MO
4. tap on 'Modem', navigate to the modem.bin file
5. let MO flash the radio
Click to expand...
Click to collapse
thx bro.....
chasmodo said:
The first one is ICS radio from the first Chanfire Repack, the other two simple Gingerbread modems. I find that GB ones work better for me on ICS, either one of them. I'd also recommend that modems be flashed using Mobile Odin:
1. extract modem.bin file from zip
2. place it on your SD card
3. start MO
4. tap on 'Modem', navigate to the modem.bin file
5. let MO flash the radio
Click to expand...
Click to collapse
Thanks a bunch man. Really appreciate it
GT-N7000 CM9
Hi guys
I'm looking for I8190NXXAMB2 stock flashable modem file. THX in advance
matns1 said:
Hi guys
I'm looking for I8190NXXAMB2 stock flashable modem file. THX in advance
Click to expand...
Click to collapse
Are you looking for that exact version?
You can find lastest baseband (I8190NXXANC2) here http://forum.xda-developers.com/showthread.php?t=2526831
If you need a different version have to:
download the stock firmware of the wanted version (I8190NXXAMB2 if you want this)
download the flashable zip from the thread i linked
replace the file modem.bin in the zip with the one from the stock firmware
flash the new zip via recovery
Clostry said:
Are you looking for that exact version?
You can find lastest baseband (I8190NXXANC2) here http://forum.xda-developers.com/showthread.php?t=2526831
If you need a different version have to:
download the stock firmware of the wanted version (I8190NXXAMB2 if you want this)
download the flashable zip from the thread i linked
replace the file modem.bin in the zip with the one from the stock firmware
flash the new zip via recovery
Click to expand...
Click to collapse
My problem is that I've flashed virginity v11 and changed baseband to ANB1 and looks like I stucked on this modem. Recovery and flushing stock rom does not change modem version, no matter what rom i use I had still ANB1. Yesterday I flushed ANA1 and testing now.
Problem is that since I flushed ANB1 with virginity my batery works very poor. (1day max). So i decided to force AMB2 modem by fushing it by TWRP. But i cant find original flashable ANB2 modem.
Thx for advice I'll try to extract modem from original rom.
ps. offcourse I'm looking for N version of modem
matns1 said:
My problem is that I've flashed virginity v11 and changed baseband to ANB1 and looks like I stucked on this modem. Recovery and flushing stock rom does not change modem version, no matter what rom i use I had still ANB1. Yesterday I flushed ANA1 and testing now.
Problem is that since I flushed ANB1 with virginity my batery works very poor. (1day max). So i decided to force AMB2 modem by fushing it by TWRP. But i cant find original flashable ANB2 modem.
Thx for advice I'll try to extract modem from original rom.
ps. offcourse I'm looking for N version of modem
Click to expand...
Click to collapse
flash stock firmware from sammoblie via odin ..I think this will help u
Ahmed.ragab said:
flash stock firmware from sammoblie via odin ..I think this will help u
Click to expand...
Click to collapse
Done it. Problem solved. I think TWRP was a problem. Thx for your help
I have a Canadian N4(910W8)and I want to change the baseband so I can try different Roms. How do I go about this? I'm guessing through Odin right? Where can I find a stock NJ7 ROM to do this? Thanks guys!
re: baseband.
yeroc1982 said:
I have a Canadian N4(910W8)and I want to change the baseband so I can try different Roms. How do I go about this? I'm guessing through Odin right? Where can I find a stock NJ7 ROM to do this? Thanks guys!
Click to expand...
Click to collapse
Firstly, if you change baseband your phone will not work with Canadian or
USA roms.
None of the twrp flashable zip file roms contains the baseband or bootloaders.
You need to keep the Canadian baseband which you already have.
What you will need to do is to save your kernel file so you can use it with the
USA zip file roms.
The kernel is located in the /System/ folder and the filename is "boot.img".
Copy that file to your internal sdcard before you do anything else.
Then after you download a usa zip file rom open it up with winrar/winzip
or other archiver and remove the boot.img in the zip file and replace it with
the boot.img you have saved in your internal sdcard before flashing.
Once you do that you can safely flash the usa zip file rom of your choice.
I never advise anyone to use a different carriers rom, there are many con's
against doing so and not many pro's. But go ahead and give it a try.
Good luck!
Thanks for the helpful info! On my note3, I always flashed tmob roms with no issues, but the note 4 is new so I didn't know exactly what would work or not. Might give this a go later on! Thanks again!
I find sys>kernel>boot_adsp> the file called "boot" which is only 4kb in size. Is that what I'm looking for? Does not have "IMG" behind the "boot"
Hi.... I was wondering the same about the NJ7.... I've flashed 2 TMobile roms so far... Darthstocker & Hyperdrive.... As long as you flash the Starkissed Kernel it boots up fine... Without it you just Bootloop....
Hello
Here's the story
I have a note 5 n920c my original csc code was mid (iraq)
I installed the ( MinotaurusRom V10 ) rom
I didnt have issues with it but i wanted to go back to stock
So i did that but the issue is i now have the (xsg) country code (united Arab Emirates)
And i tried all kind of roms
Is there a way to get back my original csc code .
""( Smart switch doesn't work for my phone .. it says . N920c doesnt support initialization)""
Thanks .:crying:
You can factory restore using Kies, instead of Smart Switch.
Do an Emergency Firmware restore. That will make everything as factory.
gaston_garcia said:
You can factory restore using Kies, instead of Smart Switch.
Do an Emergency Firmware restore. That will make everything as factory.
Click to expand...
Click to collapse
But kies doesnt support it
I tried kies and it says it doesnt supprt
download the latest rom of XSG for N920c & install it with odin software
Follow this guide. https://forum.xda-developers.com/note-4/general/how-to-csc-stock-rom-base-t3135511/page4
You'll have to edit the zip to fit your country's CSC code manually, but this is probably the best method to change CSC without wiping your internal storage. It's what I do whenever I flash a custom ROM that changes my CSC.
Do note that you have to flash the zip DIRECTLY after a clean flash of the custom ROM or else the CSC will not change. Or you could flash the zip and then do a factory reset in twrp (or is it the other way around? I can remember. Just experiment around it.)
Good luck
Edit: or if you do want to wipe your internal storage along, you could download the PhoneInfo app from play store and change your CSC from there.
Edit 2: from my personal experience, for some reason the default CSC in the N9208 Malaysia XME stock ROM is the Philippines CSC. So what I did was I went inside XME folder which is inside the CSC folder which is inside the zip file, and copied all the files there and replaced the files in /CSC (basically outside of the XME folder). If the same thing happens to you this may help as well. Also check the .xml file and make sure that it shows the right CSC for you.
Edit 3: also this belongs in the Q&A forum, mods please move this.
eushaun99 said:
Follow this guide. https://forum.xda-developers.com/note-4/general/how-to-csc-stock-rom-base-t3135511/page4
You'll have to edit the zip to fit your country's CSC code manually, but this is probably the best method to change CSC without wiping your internal storage. It's what I do whenever I flash a custom ROM that changes my CSC.
Do note that you have to flash the zip DIRECTLY after a clean flash of the custom ROM or else the CSC will not change. Or you could flash the zip and then do a factory reset in twrp (or is it the other way around? I can remember. Just experiment around it.)
Good luck
Edit: or if you do want to wipe your internal storage along, you could download the PhoneInfo app from play store and change your CSC from there.
Edit 2: from my personal experience, for some reason the default CSC in the N9208 Malaysia XME stock ROM is the Philippines CSC. So what I did was I went inside XME folder which is inside the CSC folder which is inside the zip file, and copied all the files there and replaced the files in /CSC (basically outside of the XME folder). If the same thing happens to you this may help as well. Also check the .xml file and make sure that it shows the right CSC for you.
Edit 3: also this belongs in the Q&A forum, mods please move this.
Click to expand...
Click to collapse
hello eushaun99
so when I open the XME firmware (zip file) I only see one file which when unzipped/extracted turns out to be one file... I dont see any folders.
Would you kindly elaborate on the method. I need to try changing CSC as I no longer have 4G/LTE on my phone.. just H/H+
ps with latest ota update/security patch, my note 5 9208 ain't letting me downgrade to any previous firmware via odin.
Kindly help me out
Thanks
wickedsatan said:
hello eushaun99
so when I open the XME firmware (zip file) I only see one file which when unzipped/extracted turns out to be one file... I dont see any folders.
Would you kindly elaborate on the method. I need to try changing CSC as I no longer have 4G/LTE on my phone.. just H/H+
ps with latest ota update/security patch, my note 5 9208 ain't letting me downgrade to any previous firmware via odin.
Kindly help me out
Thanks
Click to expand...
Click to collapse
The one file as in the .tar.md5 file? If so rename it to .tar, then you can extract the files inside. After that follow the link I gave to extract the cache.img which contains the CSC folder.
eushaun99 said:
The one file as in the .tar.md5 file? If so rename it to .tar, then you can extract the files inside. After that follow the link I gave to extract the cache.img which contains the CSC folder.
Click to expand...
Click to collapse
thank you so much for the help.. i did that and replaced the file.
Now how would i go back to original zip file.
all img & bin files need to be converted back to .tar.md5 file... is that possible with winrar?
wickedsatan said:
thank you so much for the help.. i did that and replaced the file.
Now how would i go back to original zip file.
all img & bin files need to be converted back to .tar.md5 file... is that possible with winrar?
Click to expand...
Click to collapse
Uhh, you'll have to do some research on that as I don't have any experience in tarballing stock ROMs. I've seen some guides somewhere to tarball stock ROM.