Database Develop

[HOWTO] Root Nexus One 2.2.1 FRG83D without OEM unlock

This guide is for people who want root but want to keep their stock rom, not breaking the warranty, unlocking bootloader etc.
A proud ubuntu user, I am writing this in a new thread purely because the manual rageagainstthecage method and SuperOneClick method did not not work for me, see link to my conclusion below if you care
http://forum.xda-developers.com/showpost.php?p=11305312&postcount=2526
What did work however was via adb shell using psneuter and its fairly simple if you follow the following commands.
This guide assumes you know how to get access to the shell via adb, if you dont then search elsewhere for a useful guide
OK lets get to business!
1. Download the attached nexus_one_softroot.tar from the bottom of this post and extract contents to the same folder as adb
2. Open up your terminal, cd to the same folder as adb and the extracted files
3. Enter the following commands:
Code:
sudo ./adb push psneuter /data/local/tmp/psneuter
sudo ./adb push busybox /data/local/tmp/busybox
sudo ./adb push su /data/local/tmp/su
sudo ./adb shell chmod 755 /data/local/tmp/psneuter
sudo ./adb shell chmod 755 /data/local/tmp/busybox
sudo ./adb shell chmod 755 /data/local/tmp/su
sudo ./adb shell
After this you should see only a $ which tells us that we at the android command line with user privileges only, lets continue
Code:
$ cd /data/local/tmp
$ ls
busybox
su
psneuter
$ ./psneuter
property service neutered.
killing adbd. (should restart in a second or two)
You will now be kicked out of android shell, lets go back in
Code:
sudo ./adb shell
After this you should see only a # which tells us that we root baby! If you want to double check issue this command
Code:
# id
uid=0(root) gid=0(root)
Lets continue on. From this point we will install busybox and su which will make root permanent
Code:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd /data/local/tmp
# ./busybox cp busybox /system/bin
# chmod 4755 /system/bin/busybox
# busybox cp su /system/bin
# chmod 4755 /system/bin/su
# exit
For some reason I sometimes have to enter exit twice to leave the android shell. Again, re-access the android shell
Code:
sudo ./adb shell
Now in the android shell we can finish up
Code:
# su
# mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
# exit
# exit
Lastly we must install Superuser, and I did this from the android market so I knew its the latest version, its simple to get, less command input etc.
Now you have root! I hope this was simple enough to follow, I have not really written a guide before but from lots of searching I just could not find a solution for my Nexus One 2.2.1 FRG83D, especially any guide that uses psneuter.
Anyway, glad to contribute
EDIT - also, being new to starting threads, this may not quite be in the right section of the forum, sorry if thats the case mods

Added link to the thread from Wiki.

upgraded to gingerbread 2.3.3. after copying and setting permissions, got this:
PHP:
$ cd /data/local/tmp
$ ls -l
-rwxr-xr-x shell shell 26248 2010-07-22 10:20 su
-rwxr-xr-x shell shell 1062992 2010-10-16 22:29 busybox
-rwxr-xr-x shell shell 585731 2011-01-08 18:02 psneuter
su
busybox
psneuter
$ ./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
second time threw me out of shell. again adb shell gives this:
PHP:
$ id
uid=2000(shell) gid=2000(shell) groups=1003(graphics),1004(input),1007(log),1009(mount),1011(adb),1015(sdcard_rw),3001(net_bt_admin),3002(net_bt),3003(inet)

mfkr said:
upgraded to gingerbread 2.3.3. after copying and setting permissions, got this:
Code:
$ ./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
Click to expand...
Click to collapse
I believe this is due to a change in the kernel as it is upgraded into gingerbread, the input/output controls have changed, leaving psneuter out of date with the current kernel.
However if an exploit is found with the kernel used in 2.3.3, you can use it in place of psneuter with the above method.

[MOD] v0.3.1 Working Full Ubuntu for 1.5.7 and 1.8.3 based on Sogarth's script

Sogarth's webtop2sd will be released soon, you really should wait and install that instead of this! Thanks -The Management
No longer breaks on 1.83, thanks to Romracer
Update: This script worked on my phone. Mind you I was installing it from a fresh SBF flash, but it should work on your phone too. Absolutely no guarantees as usual.
Update 11th April 2011, 06:59 PM: Won't be getting CWM package because it'd be huuuuuuuuuge.
Update 28th April 2011. 16:38 PM: Removing BETA tag since there have been no issues with the script for quite some time.
First off I would like to thank Sogarth for making this script in the first place as well as Romracer for fixing it for 1.83. Since he is busy doing more important work I decided to do this little hack for those of us that updated to 1.5.7 and dont feel like flashing back to earlier versions to get full Ubuntu working.
Again, this is only necessary if you're already running 1.5.7 or 1.8.3.
Secondly, I am still working on this script so it may not work for you. If you have a problem you may post in the thread or PM me showing exactly the error message, word for word, that you receive.
Updates will be included in the OP from time to time as I fix errors.
Instructions:
1) install.bat (from your computer)
2) adb shell (get a shell on your phone)
3) su (get root on your phone in that shell)
4) . /data/local/tmp/install.sh (run the install script *on your phone* don't forget the "." and the space after the dot, or you will have to chmod 755 the shell script manually)
5) ?????
6) profit\
Noob instructions, written by Viamonte (I take no credit or responsibility):
Thanks again for all your help. Now the noob instructions:
"1-Download "Terminal Emulator" from the market, on your phone (or any other terminal), and the file anexed in this thread to your computer.
2-Connect the Atrix to the computer via USB, configuring the connection mode to "None" and enabling USB Debugging mode (Settings>Applications>Development>USB debugging)
3-Unzip the file you downloaded on your pc, and run Install.bat. This will push the script to your phone.
4-Go back to your phone and open the emulator you downloaded. Then type "su" (without quotes) and press enter. Then type ". /data/local/tmp/install.sh" (without quotes) and press enter again.
The script should begin running now. It will stop in two moments where you'll be instructed to get a cup of coffee, and may take several minutes to continue form this point. When finished, the Atrix will reboot.
To check if this worked, use the Webtop either on your multimidia dock or your lapdock and verify if new itens appeared on your task bar and on the right upper side of the screen"
0.3.1 release
0.2 release
0.1 first release
Changelog
0.3.1 fix to gconf file's mdate so it does what its supposed to do =)
0.3 Small typo fixes and cpp package install fix by romracer, now works on 1.83 =)
0.2 Fixed some typos in uninstall.sh and make sure the %gconf file wound up in the right spot.
0.1 - first version. NOT CWM install but ready to be packaged for that more or less

Nice, I'll give this a shot later.

Ill give it a shot when I get home!
Sent from Motorola Atrix on TELUS.

My phone is working perfectly, so why not ruin it?
I'm giving this a try right now!
1.4.57 - Rooted and gingerblurred with HDMI Mirroring and Webtop hack.
I'll update as progress goes along:
Edit 1:
Initial try gave me this
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] y
Mounting the filesystem...
07.sh
--------------------------------------------
EXECUTION FAILED
Unable to mount the filesystem file. ERR 07
--------------------------------------------
Press any key to continue . . .
Edit 2:
Ok, it doesnt work with resetting it. How about removing?
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] y
Deleting the filesystem file...
--------------------------------------
EXECUTION FAILED
Unable to delete the filesystem file.
--------------------------------------
Press any key to continue . . .
Edit 3:
Ok, only one option left then.
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] n
--------------------------------------------------------------------------
EXECUTION FAILED
The filesystem file already exists, but no operations have been selected.
--------------------------------------------------------------------------
Press any key to continue . . .
=====================================================================
Edit 4:
Since execution is failing I'm trying to find the problem. Using ADB Shell i tried to manually run the shell scripts and stumbled here:
(I tried chmod 777 @ 02.sh to see if that was the problem, no change is results)
# ls -l
...
...
-rwsr-sr-x shell shell 87 2011-04-06 12:13 03.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
-rwsr-sr-x shell shell 251 2011-04-06 12:04 01.sh
# pwd
pwd
/data/tmp/shell
# /data/tmp/shell/02.sh
/data/tmp/shell/02.sh
/data/tmp/shell/02.sh: not found

I had the same issue as flybob when I tried to run the script.
Sent from my MB860 using XDA Premium App

Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.

Ah, I did not think about that Ririal, thanks for the info. I am not familiar with CWM though.
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.

Ririal said:
Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.
Click to expand...
Click to collapse
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !

molotof said:
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !
Click to expand...
Click to collapse
most of the script is now run by shell scripts, no reason you couldn't run them in the terminal emulator, just get the order right. There are also a few lines I didn't translate to shell so you'd have to enter them by hand.
In any case I'll keep working on this until Sogarth releases his version with union mounts =D

You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked

flybob said:
You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked
Click to expand...
Click to collapse
That's just a symlinked directory. I won't make a difference if you call either.

Yes, just replied to the previous question
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.
Click to expand...
Click to collapse
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found

flybob said:
Yes, just replied to the previous question
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found
Click to expand...
Click to collapse
Ah ok my mistake, you didn't quote anything I didn't realize that's what you were responding too
Likely noexec flag causing that issue.
Also, you can't invoke su from inside a shell script. It just doesn't work with this su binary.

yeah, I guess not. I hadn't realized that it wasn't a real 'su' before making this... too bad.
If anyone figures out how to get around that we'll be in business Unfortunately that's way beyond my expertise.

Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.

the2dcour said:
Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.
Click to expand...
Click to collapse
su -c "command"
You'll have to allow superuser on the phone for every single command.

PM'd you my error. I tried manually editing the permissions, but that didn't work.

Running on GladAtrix2 v3
USB debugging on; USB set to none
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
Press any key to continue . . .
Changed /sdcard-ext to /sdcard in script. Got this error
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
* server not running *
Press any key to continue . . .
Running BETA_ubuntu-1.0.6.4.zip. File extracts to BETA_ubuntu-1.0.6.2 directory. Ran ubuntu-1.5.7.bat
Moved BETA_ubuntu-1.0.6.2 to C:\ Same error

The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.

the2dcour said:
The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.
Click to expand...
Click to collapse
^ escapes batch, \ escapes shell. Hope this helps. If you zip up and send me the whole process in a single .sh file I can wrap it up in CWM for you.

[GT-P3XXX] busybox + install-script [+cyanogen edition][2012-08-15]

Hi folks,
here's an easy-to-install busybox for your Galaxy Tab 2. NOW with Cyanogen Mod support.
ChangeLog:
BusyBox 1.21.0-git Nano1 (2012-07-28): initial release
BusyBox 1.21.0-git Nano2 (2012-07-29): applied various patches:
BUGFIX: flush all open files after listing them (ls)
BUGFIX: when setting hostname from file p**** whole name
COMPAT: ps now accepts (= ignores) all options a POSIX ps should
allow passing -mthumb to make
ash applet now exports HOME
silently ignore processes from inittab with terminal names without matching device file
default behaviour of 'showkey' applet changed from displaying interpreted keycode to decimals
do not show a message when testing an uninitialized variable
changed some terms in top applet output (rss vs. vsz)
BusyBox 1.21.0-git Nano3 (2012-08-05): major fix
NEW: rfkill applet¹
several minor modifications to applet
BUGFIX fixed a bug in busyinstall that left system without 'sh' upon uninstall²
provide busybox-patches to the world
BusyBox 1.21.0-git Nano4 (2012-08-15): minor fix / cm 10 edition
updated to latest git (some bugfixes)
BUGFIX: reading profile now works
BUGFIX: adjusted shell paths
BUGFIX: history now works
BUGFIX: no longer replace reboot on stock rom³
NEW: Cyanogen Mod edition (tested on cm10)
¹ Either redo 'busyinstall install', or do 'ln -sf /system/bin/busybox /system/bin/rfkill'
² You can find the original sh in you CWM backup, or here: http://www.nanolx.org/downloads/P3110/original-sh
If you didn't get /system/bin/sh.orig after 'busyinstall install', use this file as /system/bin/sh.orig
³ push new busyinstall into tablet to ensure future install/uninstall is fine. then do 'mv /system/bin/reboot.orig /system/bin/reboot'
from within 'adb shell' as root to get original reboot back.
Prerequisites:
* root access on your Tablet
Download:
busybox (normal): http://www.nanolx.org/downloads/P3110/busybox-nano4
busybox (debug): http://www.nanolx.org/downloads/P3110/busybox_unstripped-nano4
busyinstall (installer/stock): http://www.nanolx.org/downloads/P3110/busyinstall
busyinstall (installer/cm10): http://www.nanolx.org/downloads/P3110/busyinstall-cm
profile (optional): http://www.nanolx.org/downloads/P3110/profile¹
busybox (patches): http://www.nanolx.org/downloads/index.php?dir=P3110/busybox-patches/
¹ profile is a generic file, read on each startup of busybox. Mine sets HOME to /,
and puts /system/xbin/ in front of /system/bin/ in PATH. You can also adjust the
prompt (PS1) or whatever here, it's valid for all users. You could check for
'$(id -u) == 0' to adjust prompt for root, if not 0, for ordinary user.
Ordinary user should get 'busybox (normal)', rather than 'busybox (debug)'.
NEW INSTALLATION (STOCK ROM):
Putting busybox on internal sd-storage:
Code:
adb push busybox /mnt/extSdCard/
adb push busyinstall /mnt/extSdCard/
replace "extSdCard" if you saved busybox somewhere else
Code:
adb shell
su
chmod 0777 /mnt/extSdCard/busybox
chmod 0777 /mnt/extSdCard/busyinstall
/mnt/extSdCard/busybox remount -o rw,remount /system
/mnt/extSdCard/busybox mv -f /mnt/extSdCard/busybox /system/bin/
/system/bin/busybox mv -f /mnt/extSdCard/busyinstall /system/bin
busyinstall install
NEW INSTALLATION (CYANOGEN ROM):
Putting busybox on device:
in Settings > Development > set 'root access' to 'apps + adb'
Code:
adb root
adb shell
busybox mount -o rw,remount /system
exit
adb push busybox /system/xbin/busybox.nano
adb push busyinstall /system/bin/busyinstall
adb push profile /system/etc/profile # optional, if downloaded profile
adb shell
chmod 0777 /system/bin/busyinstall
busyinstall install
UPDATE:
Just download busybox, busyinstall and replace the ones in /system/bin/ - it will instantly work:
Code:
adb push busybox /system/bin/
adb push busyinstall /system/bin/
adb shell
su
toolbox chmod 0777 /system/bin/busybox # if you use windows, the executable bit might be missing in the uploaded file
chmod 0777 /system/bin/busyinstall
UNINSTALLATION:
Code:
ab shell
su
busyinstall --
That's it!
I tested everything and it does work perfect, either way a backup (CWM) is always recommened, when working around with stuff down the stack.
Suggestions welcome.

Out of curiosity, what is the difference between what this does and what BusyBox (by Stericson) from the Play Store does?
Sent from my MB855 using Tapatalk 2

Jleeblanch said:
Out of curiosity, what is the difference between what this does and what BusyBox (by Stericson) from the Play Store does?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
mine is a newer version
has all features of busybox (stericsons free version does not have all applets in busybox enabled, eg. 'sh' applet is missing)
installation 100% GT-P3XXX optimized
As of now, mostly personal preference I'd say.
Edit: But I'm currently applying stuff from busybox-power (maemo) which adds serveral bugfixes and stuff to busybox.

OK, improved version of busybox available in post 1 (+ changelog)

OK, thanks for letting me know!
I actually haven't done much with my Tablet lately as I've been busy with my phone as that now has CM10 too
But once I get my phone all set I'll use your BusyBox and give it a go!
Also, you said your busybox version is newer...but busybox via my phone is version 1.20.2. Just letting you know!
Thanks for this btw, I'd rather have a modified version optimized for my tablet versus a more universal version so to speak. Plus, with your updated applets! Thanks!
Sent from my MB855 using Tapatalk 2

Jleeblanch said:
Also, you said your busybox version is newer...but busybox via my phone is version 1.20.2. Just letting you know!
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Oh, ... mine is 1.21.0-git - fixed the typo

First,thank you for your work,second I've a question: I've an p3100 (wifi+gsm) ,it rooted on stock 4.0.4 ,and no busybox installed.It has 16gb onboard ,and I don't have at the moment any external microsd in slot,I've ordered an 32gb,but it hasn't come yet.Can you please tell me if it's safe puting your files in /sdcad (not ExtSdCard like you wrote) and give the commands using ''sdcard'' word ?
For e.g:
db shell
su
/mnt/sdcard/busybox remount -o rw,remount /system
I need busybox to backup my /efs folder ,but I don't want to screw something,so please tell me if it is safe to use internal memory (sdcard) for busybox install?Also ,when I'll receive the microsd ,I will need to install again busybox with your original commands from this topic ?
Thanks a lot!!
Best Regards!

viasat said:
First,thank you for your work,second I've a question: I've an p3100 (wifi+gsm) ,it rooted on stock 4.0.4 ,and no busybox installed.It has 16gb onboard ,and I don't have at the moment any external microsd in slot,I've ordered an 32gb,but it hasn't come yet.Can you please tell me if it's safe puting your files in /sdcad (not ExtSdCard like you wrote) and give the commands using ''sdcard'' word ?
For e.g:
db shell
su
/mnt/sdcard/busybox remount -o rw,remount /system
I need busybox to backup my /efs folder ,but I don't want to screw something,so please tell me if it is safe to use internal memory (sdcard) for busybox install?Also ,when I'll receive the microsd ,I will need to install again busybox with your original commands from this topic ?
Thanks a lot!!
Best Regards!
Click to expand...
Click to collapse
Of course you can. It does not matter where you put busybox. All that matters is, that you adjust the commands to your path.
In your you would push the files using ADB, like
Code:
adb push busybox /mnt/sdcard
adb push busyinstall /mnt/sdcard
also you don't need to re-do this when you got your sd-card, because during the steps you move busybox/busyinstall into /system/bin/.
Edit: updated instructions to clarify this.

Ok,thank you for your time,everything it's clear now.I'll try later,when I'm going home.
Cheers!
---------- Post added at 07:04 PM ---------- Previous post was at 06:11 PM ----------
OK,first problem:when I try to execute the first comand,it gives me ''permission denied'',so after a little reading,because my kernel it's stock,I've installed Chainfire's ''adbd Insecure v1.0 '' http://forum.xda-developers.com/showthread.php?t=1687590 to give me rights.After that I've no more errors,but,when I execute first command in adb,it says nothing,just hanging,and adb doesn't come back to # symbol ,and because of that I can't execute the next command.Any ideea what I'm doing wrong?Thanks!

What command failed?
Gesendet von meinem GT-P3110 mit Tapatalk 2

I don't know how to explain,it not really failed, but when I type
/mnt/sdcard/busybox remount -o rw,remount /system the adb doesn't return anything back,and doesn't come back to # symbol ,it just staying,nothing more,no response.I was waiting 2 minutes,and nothing ,doesn't return to # .I can type the next command
/mnt/sdcard/busybox mv /mnt/sdcard/busybox /mnt/sdcard/busyinstall /system/bin/
it's the same,no output,nothing.
Can you please tell me what I'm doing wrong?
Thanks again!
Now I'm stuck,even with adbd insecure activate I cannot execute commands:
C:\Documents and Settings\X\Desktop\ADB>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ # /mnt/sdcard/busybox remount -o rw,remount /system
/mnt/sdcard/busybox remount -o rw,remount /system
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ # /mnt/sdcard/busybox mv /mnt/sdcard/busybox /mnt/sdcard/busy
install /system/bin/
dcard/busybox /mnt/sdcard/busyinstall /system/bin/ <
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ #
Maybe I need first to install Stericsson's busybox from Market?At the moment,as I said before I don't have busybox installed at all,only su.
One more thing,every time when I save from your link busyinstall,no matter what browser,the file is saved as busyinstall.txt
It is normal ,or I need to rename it?
Thanks a lot!

Hmm... seems I forgot a little thing.
do this after you put busybox on tablet, before anything else:
Code:
adb shell
su
chmod 0777 /mnt/sdcard/busybox
then follow the rest of the instructions.
/goingtofixfirstpost

Same story,take a look:
[email protected]:/ # chmod 0777 /mnt/sdcard/busybox
chmod 0777 /mnt/sdcard/busybox
[email protected]:/ # chmod 0777 /mnt/sdcard/busyinstall
chmod 0777 /mnt/sdcard/busyinstall
[email protected]:/ # /mnt/sdcard/busybox remount -o rw,remount /system
/mnt/sdcard/busybox remount -o rw,remount /system
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ #

Hmmm... > could you provide me the details of 'adb logcat'? Ensure to run those commands while logging.
Gesendet von meinem GT-P3110 mit Tapatalk 2

I don't know if this is what you want,but here we go:

I'm going to check your logs soon and report back.
Meanwhile I updated to Nano3 - see first post.

I got no clue why it does not work for you, but me.
What boot image and ROM are you using? Default boot/ROM, rooted boot/ROM, cyanogen?
I only tested default ROM with my boot. Currently testing cyanogenmod 10, but except some adjustments to busyinstall it will work there, too.

Sorry for the late reply,I'm on vacation until Sunday,and my acces to internet it's very limited here.Now,regarding my problem,first when I got the tablet it was on stock 4.0.3 ,wich I rooted manually to keep the counter to 0 (for warranity) ,and after that I updated to stock 4.0.4 using Mobile Odin Pro,with Everoot option ( it's rooting the rom on the fly) .So now I'm rooted on stock 4.0.4 ,stock recovery, and no busybox installed.I fell more secure and want to install your busybox version,because it's specialy designed for tab2,and it's has features from Maemo (I'm a big fan,I owned an N800,and I've also an N900 ).Maybe,if you have the time and the skills,you can pack it on an .apk version,if it's possible,of course.I will try more Sunday,when I'll be back home.Thanks again for your patience and help.Best Regards!

It will be great if we have a kernel (even stock) with CWM and this busybox...
I am also rooted with flash counter 0 and stock recovery.
Sent from my GT-P3110 using Tapatalk 2

Maybe some contributor creates a flashable zip (for CWM).
So... uploaded 1.20.1-Nano4. See first post for changes.
This time an addtional install-script for cyanogen mod was added, along some fixes.
ah... and: 100th post

Previously broken GB root prohibits ICS404root script

The ICS404root script package has a fatal bug if a broken su already exists. Here's what happened on my D4.
I had root working fine on the GB version that shipped when I got the phone
I updated my stock (but rooted) D4 to 6.13.219 using normal OTA update and like an idiot, I forgot to use a root-keeper.
Confirmed root was broken as expected
Updated to ICS with "D4 6.16.217.zip". (I did no wipes other than the cache partition).
Everything worked fine and ICS is up and running
I ran the ICS404root.zip script package and get the following:
Code:
ICS404root # sh linux_runme_root_script.sh
Pushing files from root package to device...
4393 KB/s (586212 bytes in 0.130s)
4554 KB/s (1862336 bytes in 0.399s)
15 KB/s (660 bytes in 0.042s)
473 KB/s (22364 bytes in 0.046s)
Removing local copies.
Setting permissions.
Rebooting device...
Waiting for device to boot...
Attempting to place su binary on /system...
debugfs 1.42 (29-Nov-2011)
debugfs: debugfs: write: The file 'su' already exists
debugfs: debugfs: debugfs: debugfs: Cleaning up...
Rooting completed, must reboot.
Rebooting device...
Rooted.
So I have an old broken root on my phone, and this breaks the root script. I tried reinstalling superuser, but could only "uninstall updates" rather than uninstalling. (Uninstalling updates and re-installing them did not work.) I tried installing busybox but got root denied messages.
I *really* don't want to wipe my /system to fix this. Can the script be modified to deal with pre-existing su binaries?
UPDATE: (partially solved)
I ran debugfs in interactive mode and did a
Code:
debugfs: cd xbin
debugfs: rm su
debugfs: cd ..
debugfs: cd bin
debugfs: rm su
Then I completed the root hack manually and rebooted. I then updated Superuser and ran Titanium since I saw somewhere in a thread the TB will correct permissions on the su binary if they were funky. Sure enough it changed su from 4755 to 6755. After a reboot, everything was fine!
So... Root is attainable on ICS in the presence of a broken GB root, but the script should still be updated to deal with this.

ryanmcdonald said:
UPDATE: (partially solved)
I ran debugfs in interactive mode and did a
Code:
debugfs: cd xbin
debugfs: rm su
debugfs: cd ..
debugfs: cd bin
debugfs: rm su
Then I completed the root hack manually and rebooted. I then updated Superuser and ran Titanium since I saw somewhere in a thread the TB will correct permissions on the su binary if they were funky. Sure enough it changed su from 4755 to 6755. After a reboot, everything was fine!
So... Root is attainable on ICS in the presence of a broken GB root, but the script should still be updated to deal with this.
Click to expand...
Click to collapse
looks like i have the same issue except i got there a different way. i did use rootkeeper (though didn't do temp unroot before allowing OTA update to run), so i lost root when going to ics. not a big deal though, as the ics404root util worked fine to re-root.
well, i was having some odd issues like no sound when getting an sms, among others, so decided to do factory reset (without unrooting first). su is gone from the app drawer, but apparently it's still there as i get the same "debugfs: debugfs: write: The file 'su' already exists". i had to add a pause to the end of the batch file to be able to see that message, since it quits whether it worked or not, and you never see it.
i'm not familiar with what you mentioned about running debugfs in interactive. i tried using adb shell to poke around to see if i could find su and mv it to a .bak or something, but my linux command line skills are apparently too rusty. i found su in /system, but since /system is mounted as read only, i can't do anything. i eventually figured out how to get into interactive mode (forgot i had to specify the full path to debugfs since it's not in the default search path), but it tells me fs not open. i try to open, but i don't know what to give it for things like block size, etc:
Code:
[email protected]_maserati:/ $ /data/local/12m/debugfs
/data/local/12m/debugfs
debugfs 1.42 (29-Nov-2011)
debugfs: cd xbin
cd xbin
cd: Filesystem not open
debugfs: open_filesys
open_filesys
open_filesys: Usage: open [-s superblock] [-b blocksize] [-c] [-w] <device>
when looking around in adb shell, i could only find an su in /system/xbin - if i could come up with a way to delete this via adb, i think i could just run the regular root script and be done. any ideas?

still broken. i found a command that let me remount /system as rw, then i used rm su and verified it was gone w/ ls. re-ran ics404root batch file. no errors this time, but still no root on the phone. it seems to be putting su in there, but apparently it's corrupt. the way i check for root is to simply start titanium. right away it says it couldn't get root privileges.
Code:
C:\temp\droid4\ICS404root>adb shell
[email protected]_maserati:/ $ su
su
[email protected]_maserati:/ # mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /syste
m
2 /dev/block/mtdblock3 /system <
[email protected]_maserati:/ # cd /system/xbin
cd /system/xbin
[email protected]_maserati:/system/xbin # ls s*
ls s*
script
scriptreplay
sed
sendmail
seq
setarch
setconsole
setfont
setkeycodes
setlogcons
setsid
setuidgid
sh
sha1sum
sha256sum
sha512sum
showkey
slattach
sleep
smemcap
softlimit
sort
split
start-stop-daemon
stat
strings
stty
su
su.bak
sulogin
sum
sv
svlogd
swapoff
swapon
switch_root
sync
sysctl
syslogd
[email protected]_maserati:/system/xbin # rm su
rm su
[email protected]_maserati:/system/xbin # ls s*
ls s*
script
scriptreplay
sed
sendmail
seq
setarch
setconsole
setfont
setkeycodes
setlogcons
setsid
setuidgid
sh
sha1sum
sha256sum
sha512sum
showkey
slattach
sleep
smemcap
softlimit
sort
split
start-stop-daemon
stat
strings
stty
su.bak
sulogin
sum
sv
svlogd
swapoff
swapon
switch_root
sync
sysctl
syslogd
[email protected]_maserati:/system/xbin # rm su.bak
rm su.bak
[email protected]_maserati:/system/xbin # ls s*
ls s*
script
scriptreplay
sed
sendmail
seq
setarch
setconsole
setfont
setkeycodes
setlogcons
setsid
setuidgid
sh
sha1sum
sha256sum
sha512sum
showkey
slattach
sleep
smemcap
softlimit
sort
split
start-stop-daemon
stat
strings
stty
sulogin
sum
sv
svlogd
swapoff
swapon
switch_root
sync
sysctl
syslogd
[email protected]_maserati:/system/xbin # exit
exit
[email protected]_maserati:/ $ exit
exit
i have modified the batch file. i turned echo on and rem'd out the delete statements so i could see what was going on and so i wouldn't have to unzip it every time i tried it. (why does it delete the local stuff anyway?) i also added a pause at the end.
Code:
C:\temp\droid4\ICS404root>echo Connect your phone via USB to your PC and be sure
Connect your phone via USB to your PC and be sure
C:\temp\droid4\ICS404root>echo it ISN'T set to mount as a mass storage device.
it ISN'T set to mount as a mass storage device.
C:\temp\droid4\ICS404root>echo (ENTER to continue or push Ctrl-C to exit)
(ENTER to continue or push Ctrl-C to exit)
C:\temp\droid4\ICS404root>pause
Press any key to continue . . .
C:\temp\droid4\ICS404root>echo "Pushing files from root package to device..."
"Pushing files from root package to device..."
C:\temp\droid4\ICS404root>adb push busybox /data/local/12m/
2434 KB/s (586212 bytes in 0.235s)
C:\temp\droid4\ICS404root>adb push debugfs /data/local/12m/
2774 KB/s (1862336 bytes in 0.655s)
C:\temp\droid4\ICS404root>adb push rooter /data/local/12m/
71 KB/s (660 bytes in 0.009s)
C:\temp\droid4\ICS404root>adb push su /data/local/12m/
1818 KB/s (22364 bytes in 0.012s)
C:\temp\droid4\ICS404root>echo "Removing local copies."
"Removing local copies."
C:\temp\droid4\ICS404root>rem del busybox
C:\temp\droid4\ICS404root>rem del debugfs
C:\temp\droid4\ICS404root>rem del rooter
C:\temp\droid4\ICS404root>rem del su
C:\temp\droid4\ICS404root>echo "Setting permissions."
"Setting permissions."
C:\temp\droid4\ICS404root>adb shell chmod 755 /data/local/12m/busybox
C:\temp\droid4\ICS404root>adb shell chmod 755 /data/local/12m/debugfs
C:\temp\droid4\ICS404root>adb shell chmod 755 /data/local/12m/rooter
C:\temp\droid4\ICS404root>adb shell chmod 755 /data/local/12m/su
C:\temp\droid4\ICS404root>adb shell mv /data/local/12m/batch /data/local/12m/bat
ch.bak
C:\temp\droid4\ICS404root>adb shell ln -s /dev/block/mmcblk1p20 /data/local/12m/
batch
C:\temp\droid4\ICS404root>echo "Rebooting device..."
"Rebooting device..."
C:\temp\droid4\ICS404root>adb reboot
C:\temp\droid4\ICS404root>echo "Waiting for device to boot..."
"Waiting for device to boot..."
C:\temp\droid4\ICS404root>adb wait-for-device shell /data/local/12m/rooter
Attempting to place su binary on /system...
debugfs 1.42 (29-Nov-2011)
debugfs: debugfs: Allocated inode: 4359
debugfs: debugfs: debugfs: debugfs: Cleaning up...
Rooting completed, must reboot.
C:\temp\droid4\ICS404root>adb shell rm /data/local/12m/rooter
C:\temp\droid4\ICS404root>echo "Rebooting device..."
"Rebooting device..."
C:\temp\droid4\ICS404root>adb reboot
C:\temp\droid4\ICS404root>echo "Rooted."
"Rooted."
C:\temp\droid4\ICS404root>rem del AdbWinUsbApi.dll
C:\temp\droid4\ICS404root>rem del AdbWinApi.dll
C:\temp\droid4\ICS404root>rem del adb.exe
C:\temp\droid4\ICS404root>rem del linux_runme_root_script.sh
C:\temp\droid4\ICS404root>del
The syntax of the command is incorrect.
C:\temp\droid4\ICS404root>pause
Press any key to continue . . .
C:\temp\droid4\ICS404root>
i'm kinda stuck at this point, but at least my phone isn't bricked. but considering all the issues i've had w/ ICS (the separate notification and ringtone volumes which cannot be linked being the TOP of my sh*t list, right after the crappy dialer, the lousy SMS client (seriously, gray on black? i cant read that!) and the list goes on and on...) i'd honestly rather go back to stock rooted GB. chrome was the only other reason i wanted ics and it seemed to be pretty poorly implemented to me, so i have no more interest in ICS.
i almost wonder if it's worth intentionally bricking it and bringing it back to vzw for exchange, and hopefully the new one won't have ics yet.

ok, i am rooted again! i had to use the Droid 4 Utility ICS Only to do it. the links to the LITE version are broken, so i had to download the entire 600mb package, but it worked to root my phone. now to start reinstalling stuff w/ titanium!

How to manually update su and SuperSu file through ADB root shell?

I have an un-rooted device, with Android 5.0 system, and the core is ARM Coretex A53.
I happen to found "adb root" works, that means I can play as root through ADB shell.
I successfully deleted a trash apk, renowned "kingroot", from my system.
Then, I try to manually update su and SuperSu file, through the bellowing commands:
# mount -o rw,remount /system
# cp /sdcard/mrw/su /system/xbin/su
# cp /sdcard/mrw/su /system/bin/su
# pm install /sdcard/mrw/superuser.apk
(I'm using a 2.46 SuperSu version, which should be OK for Android 5.0 system)
But it fails. The SuperSu told me " su binary not installed".
My questions:
1. Is this a feasible way to update Su and SuperSu, and get root access?
2. There's a bunch of architect, I tried both "arm" and "arm64", but none of the su binary can work. Which architect shall I choose, when I'm running on a ARM Coretex A53 core? ( I know it is a 64bit core)
Thanks a lot, and Best Regards,
towenyu

Did you get this device secondhand? Also what device is it, since many have their own root method because of OEM crap.
That said, you only need su in one location, either /system/xbin/su or /system/bin/su (I typically see it in /system/xbin/su). I'm not sure what happens if it's in both, but it's just wasted space.
You can try these commands through adb root; since you already were able to get su onto your device, it may be just a matter of ownership and permissions:
Code:
# mount -o rw,remount /system
# chmod 755 /system/xbin/su
# chown root:root /system/xbin/su
# mount -o ro,remount /system
chown 755 sets the permissions to rwxr-xr-x (user gets read/write/execute, group/other gets read/execute). Execute is the important bit here, since otherwise the su binary can't do its job. After those commands, try SuperSU again and see if it works (you might need a reboot, because of how Android 5.0+ handles changes to /system) The last mount -o ro command just changes /system back to read-only, to prevent accidental changes to other parts.

Successfully rooted!
Not that simple, but basically follow the update-binary script already inside supersu package.
Only need to made slight modification due to my system won't support "unzip"

Now that you're successfully rooted, go install Busybox, that'll give you a lot of Linux commands Android doesn't have by default, including unzip.

xfullmetal17 said:
Now that you're successfully rooted, go install Busybox, that'll give you a lot of Linux commands Android doesn't have by default, including unzip.
Click to expand...
Click to collapse
Thanks for your advice! I will try it.
But don't there's already a Busybox in android system? I guess what I need to do is find somewhere a more powerful busybox binary -- or build it by my own, but that may be not so easy for me.

Android has some basic Linux commands support, but I don't think it has Busybox (if you have a custom ROM you may have some additional commands, but since you said unrooted I don't think it was installed.
This is one of the most popular installers for Busybox: https://play.google.com/store/apps/details?id=stericson.busybox
I've used it since I first rooted with Android 2.2 and haven't had any issues with it (save for lack of vim, since stock Android doesn't have the correct libraries for it)

rooting my htc m9 running marshmallow
Hi, I'm totally blind, and twrp isn't an option for me since it doesn't have a built in screen reader. I would like to install supersu to system, would some one kindly help me in telling me what files to put where. I think the m9 is arm64, but besides su and supersu.apk, I think there's installrecovery.ssh and some other files that have to go in, so please help some one
xfullmetal17 said:
Android has some basic Linux commands support, but I don't think it has Busybox (if you have a custom ROM you may have some additional commands, but since you said unrooted I don't think it was installed.
This is one of the most popular installers for Busybox: https://play.google.com/store/apps/details?id=stericson.busybox
I've used it since I first rooted with Android 2.2 and haven't had any issues with it (save for lack of vim, since stock Android doesn't have the correct libraries for it)
Click to expand...
Click to collapse

Hi guys ,
it is possible to run manualy via adb shell update-binary file from META-INF supersu folder for install it ? (means before unpacked folder supersu is copied to ex. /tmp)
I'm asking bcose no custom recovery and no root on my device yet.
Thx

nalas said:
Hi guys ,
it is possible to run manualy via adb shell update-binary file from META-INF supersu folder for install it ? (means before unpacked folder supersu is copied to ex. /tmp)
I'm asking bcose no custom recovery and no root on my device yet.
Thx
Click to expand...
Click to collapse
I have same saturation, no TWRP, no SU installed on my device: [email protected]_cn:/ #, Android M,
What I have is a userdebug boot.img support "adb root", so my draft commands in my mind please run one by one, not batch.. WARNING, this may make your system bootloop,take your own risk!!!.)
fastboot flash boot boot_userdebug.img
fastboot reboot
adb wait-for-device
adb root
adb remount
adb disable-verity
adb shell setenforce 0
adb reboot
cd D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64
adb wait-for-device
adb root
adb remount
adb shell setenforce 0
adb push .\su /system/bin/su
adb push .\su /system/xbin/su
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/xbin/su
adb shell /system/bin/su --install
adb shell /system/bin/su --daemon&
adb install ..\common\Superuser.apk
adb shell setenforce 0
adb disable-verity
if you found SuperSU not found root, try adb shell setenforce 0 again.
then you can get SuperSU found su file need to update, use normal way to do it.
then, it will be "Installation success !"
Enjoy it.
so reference log:
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
adb: error: failed to copy 'su' to '/system/bin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb root
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
adb: error: failed to copy 'su' to '/system/bin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb remount
remount succeeded
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
[100%] /system/bin/su
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/xbin/su
adb: error: failed to copy 'su' to '/system/xbin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb shell
[email protected]_cn:/ # su
[email protected]_cn:/ # cd /system/bin
[email protected]_cn:/system/bin # chmod 06755 su
chmod: chmod 'su' to 106755: Read-only file system
1|[email protected]_cn:/system/bin # ls su
su
[email protected]_cn:/system/bin # ls -al su
-rwxr-xr-x root shell 108496 2008-02-29 03:33 su
[email protected]_cn:/system/bin # su --intall
[email protected]_cn:/system/bin # su --daemon&
[1] 6146
[email protected]_cn:/system/bin # getenforce
Enforcing
[1] + Done su --daemon
[email protected]_cn:/system/bin # setenforce 0
[email protected]_cn:/system/bin # getenforce
Permissive
[email protected]_cn:/system/bin # exit
[email protected]_cn:/system/bin # exit
[email protected]_cn:/ # exit
/system/bin/su
exit
^C

Azlun said:
I have same saturation, no TWRP, no SU installed on my device: [email protected]_cn:/ #, Android M,
What I have is a userdebug boot.img support "adb root", so my draft commands in my mind please run one by one, not batch.. WARNING, this may make your system bootloop,take your own risk!!!.)
fastboot flash boot boot_userdebug.img
fastboot reboot
adb wait-for-device
adb root
adb remount
adb disable-verity
adb shell setenforce 0
adb reboot
cd D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64
adb wait-for-device
adb root
adb remount
adb shell setenforce 0
adb push .\su /system/bin/su
adb push .\su /system/xbin/su
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/xbin/su
adb shell /system/bin/su --install
adb shell /system/bin/su --daemon&
adb install ..\common\Superuser.apk
adb shell setenforce 0
adb disable-verity
if you found SuperSU not found root, try adb shell setenforce 0 again.
then you can get SuperSU found su file need to update, use normal way to do it.
then, it will be "Installation success !"
Enjoy it.
so reference log:
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
adb: error: failed to copy 'su' to '/system/bin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb root
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
adb: error: failed to copy 'su' to '/system/bin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb remount
remount succeeded
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/bin/su
[100%] /system/bin/su
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb push su /system/xbin/su
adb: error: failed to copy 'su' to '/system/xbin/su': Read-only file system
D:\tools\Downloads\SR3-SuperSU-v2.82-SR3-20170813133244\arm64>adb shell
[email protected]_cn:/ # su
[email protected]_cn:/ # cd /system/bin
[email protected]_cn:/system/bin # chmod 06755 su
chmod: chmod 'su' to 106755: Read-only file system
1|[email protected]_cn:/system/bin # ls su
su
[email protected]_cn:/system/bin # ls -al su
-rwxr-xr-x root shell 108496 2008-02-29 03:33 su
[email protected]_cn:/system/bin # su --intall
[email protected]_cn:/system/bin # su --daemon&
[1] 6146
[email protected]_cn:/system/bin # getenforce
Enforcing
[1] + Done su --daemon
[email protected]_cn:/system/bin # setenforce 0
[email protected]_cn:/system/bin # getenforce
Permissive
[email protected]_cn:/system/bin # exit
[email protected]_cn:/system/bin # exit
[email protected]_cn:/ # exit
/system/bin/su
exit
^C
Click to expand...
Click to collapse
Thank You - I will check and give feedback

Can I somehow just copy su and supersu files to phone (stock ROM) with full root shell to get root? Unfortunately bootloader is locked and only root shell is available.

user4978023 said:
Can I somehow just copy su and supersu files to phone (stock ROM) with full root shell to get root? Unfortunately bootloader is locked and only root shell is available.
Click to expand...
Click to collapse
Of course not. If it were that easy rooting would be a non-issue for devices with a locked bootloader.

towenyu said:
Successfully rooted!
Not that simple, but basically follow the update-binary script already inside supersu package.
Only need to made slight modification due to my system won't support "unzip"
Click to expand...
Click to collapse
Can you give more details ?
I'm in a similar situation (/system/bin/su and /system/xbin/su "updated" from Supersu zip , root access from adb shell , rom built as userdebug) but I'm unable to launch the update-binary through adb to get the TV fully rooted..