Database Develop

[MOD] Various Tweaks for your Galaxy S2G

Hey guys,
I would like to start to develop for this phone even without a phone (but I hope this fact is changing soon ^^ I saved 200euro by myselfe to buy a phone maybe you can help me with the rest ).
Doesn´t matter here´s a flashable zip (untested because of the no device point) that should work and includes the following tweaks. Download it and flash it through CWM. I played abit with your device´s files Detailed explanation of what is included below. Of course other Devs can use this in their Roms without asking.
Please report Bugs if you´ve found any!
GPS Boost (Credits to Crescendo Xenomorph for your brilliant idea, I played a bit with the values that are in the file you found):
To come to a better GPS and faster capture of location I edited /system/etc/sirfgps.conf
PROJECT=SAMSUNG_T1
UART_DRIVER=/dev/ttyO0
RESET_GPIO=/sys/devices/virtual/sec/gps/GPS_nRST/value
ONOFF_GPIO=/sys/devices/virtual/sec/gps/GPS_PWR_EN/value
EXTERNAL_LNA=1
REF_CLOCK_26MHZ=1
UART_BAUD_RATE=2
FREQUENCY_AIDING=0
SENSOR_AIDING=0
SET_ID_IMSI=1
DEBUGGING_FILES=0
SSL_ENABLED=1
CERTI_VERSION=0
CP_RESPONSETIME=2
CONTROL_PLANE=1
ATT_NETWORK_OPERATOR=0
EMC_ENABLE=0
Click to expand...
Click to collapse
If you change EMC_ENABLE, SENSOR_AIDING and FREQUENCY_AIDING to 1 there will be a big improvement but also more battery consume when you use GPS. (Of course already done in the .zip).
Faster Boot:
To enable a faster boot I edited the script /system/etc/init.goldfish.sh
[...]
# disable boot animation for a faster boot sequence when needed
boot_anim=`getprop ro.kernel.android.bootanim`
case "$boot_anim" in
0) setprop debug.sf.nobootanimation 1
;;
esac
[...]
Click to expand...
Click to collapse
You have to make sure that setprop debug.sf.nobootanimation 1 will be done in every case, you will now boot very faster. (Also done in the .zip).
Higher IdleTimeout (Bluetooth):
It´s not really a Tweak I just increst the IdleTimeout time because I always use it at this level, it seems more logical to me. Edited in /system/etc/bluetooth/input.conf
# Configuration file for the input service
# This section contains options which are not specific to any
# particular interface
[General]
# Set idle timeout (in minutes) before the connection will
# be disconnect (defaults to 0 for no timeout)
#IdleTimeout=30
Click to expand...
Click to collapse
Longer DiscoverableTimeout (Bluetooth):
When I want to transfer files via bluetooth I always anger about the low time the phone is by default in a discoveryable mode (so that your device can be seen by other devices). So I also cahnged this from 180 to 300
[...]
# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
DiscoverableTimeout = 300
[...]
Click to expand...
Click to collapse
You can find the lines in /system/etc/bluetooth/main.conf
Set PairableTimeout (Bluetooth):
Samsung invented the DiscoverableTimeout but doesn´t use the pairablemodeTimeout to save battery! Why?
[...]
# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
PairableTimeout = 0
[..]
Click to expand...
Click to collapse
So I set a PairableTimeout at 1000 by default. You can find the lines in /system/etc/bluetooth/main.conf
If you have any problem feel free to post your question below. I will add some other tweaks when I found some new If you like my work, please thank, may consieder a donation and line my facebook page. Thanks! Happy flashing
Please like my site on Facebook ​

Awesome works.. thanks for ur hardwork..neway this G device got lots of trouble like music stutter while listening to the music through earphone...and also hang a lot..can hang just because of turning on or off a wifi sometime and so on..could u please see through this device and if possible could u please do ot edit some tweaks that may lighter this device so that it will not hang a lot..
Sent from my GT-I9100G

rascal123 said:
Awesome works.. thanks for ur hardwork..neway this G device got lots of trouble like music stutter while listening to the music through earphone...and also hang a lot..can hang just because of turning on or off a wifi sometime and so on..could u please see through this device and if possible could u please do ot edit some tweaks that may lighter this device so that it will not hang a lot..
Sent from my GT-I9100G
Click to expand...
Click to collapse
I will do this
This here is more like what configs I find usefull but when I know more about the device I will do the real improvements
Sent from my GT-I9000 using XDA

Anyone check and plss report does all bluetooth tweaks are working or not...
Sent from my GT-I9100G using XDA

thanks
danke mein freund , will try the faster boot for sure

The GPS improve didn´t work for me.
Regards!

Great work, GPS connects much faster now, boot is also faster. Thx

Blutooth and gps are working just ammend the tweak myself using root explorer cause i still want my bootanmation thanks for sharing the code..waiting for further tweaks from u fuss..
Sent from my GT-I9100G

Hi...fuss...can u provide the untweek version too..becouse my s2 bootanimation seen disappear after i flash ur tweek....can u help me?

rascal123 said:
Blutooth and gps are working just ammend the tweak myself using root explorer cause i still want my bootanmation thanks for sharing the code..waiting for further tweaks from u fuss..
Sent from my GT-I9100G
Click to expand...
Click to collapse
When u edited the script yourself,did you change anything in the code provided to keep ur boot animation ?

Madarox said:
When u edited the script yourself,did you change anything in the code provided to keep ur boot animation ?
Click to expand...
Click to collapse
Download the .zip open the archive with winrar or 7zip and delete init.goldfish.sh from /System/etc
Sent from my GT-I9000 using XDA

Madarox said:
When u edited the script yourself,did you change anything in the code provided to keep ur boot animation ?
Click to expand...
Click to collapse
I didnt flash the code provided..i just follow codes above that he shares with us..so i just edit on blutooth and gps part...im not touching the bootanimation part cause i still want my bootanimation
Sent from my GT-I9100G

fuss132 said:
Download the .zip open the archive with winrar or 7zip and delete init.goldfish.sh from /System/etc
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Thanks,now I don't have to do each tweak manually

Madarox said:
Thanks,now I don't have to do each tweak manually
Click to expand...
Click to collapse
Press Thanks if I helped you
Sent from my GT-I9000 using XDA

fuss132 said:
Press Thanks if I helped you
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
I did
Well I flashed it and I can notice that GPS and bluetooth improved but the boot animation is gone even that I deleted that file before flashing :/

Madarox said:
I did
Well I flashed it and I can notice that GPS and bluetooth improved but the boot animation is gone even that I deleted that file before flashing :/
Click to expand...
Click to collapse
Bootanination should be there when you Boot a second time else please Report it to me and I will find the problem
Sent from my GT-I9000 using XDA

fuss132 said:
Bootanination should be there when you Boot a second time else please Report it to me and I will find the problem
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Nope,still no animation after rebooting 3 times.

any tweak for speed up internet connection? ( 3g CONNECTION)

shaeshi said:
any tweak for speed up internet connection? ( 3g CONNECTION)
Click to expand...
Click to collapse
There are many tweaks available but they are only fake ones that simulate a better connection. In my opinion its impossible to increase noticable...
Sent from my GT-I9000 using XDA

can you do a zip to remove the tweaks ??? just in case

[TWEAKS] Script for Speed/Battery/IO Scheduler and Governor changer

Hi everybody!
I've compiled a script with a few tweaks based on knzo post
This works on CM7, should work on stock also!
I've also added to the script a few lines to change the IO Scheduler and governor. You just have to edit the attachment (unzip it first ) and remove the "#" before the line you want to apply (I've just add the lines depending if you have CM7's stock kernel or huexxx kernel, but you can edit for any kernel, you just have to edit for the governor/io schedulers available or just leave that lines commented).
# change Governor
# Huexxx's kernel
# echo interactivex > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
# change IO Scheduler
# CM7's kernel
# echo "noop" > /sys/block/mmcblk0/queue/scheduler;
# Huexxx's kernel
# echo "sio" > /sys/block/mmcblk0/queue/scheduler;
.....​
After this, do this steps:
1 - Install SManager
2 - Open SManager and go to the script, I put it in /data/script
3 - Single click the script "74diogo" and check "Su" and "Boot" and then save.
4 - Just reboot.
Note: It could take a minute or two to change the governor in Cyanogenmod settings.
That is it!
Feel free to leave to give your feedback

By the way... When I changed the default governor via CM settings and applied at boot, the phone becomes very slow in the first minute after boot...
Changing the governor with this script, that slow performance disappears

Also, you can activate JIT, use 16 bit transparency and disable scrolling cache (force disable) for a little speed and smooth...

I get a lot of not found errors is that normal? And also a lot of permission denied.

a_alex_1993 said:
I get a lot of not found errors is that normal? And also a lot of permission denied.
Click to expand...
Click to collapse
Yeah. You should choose the option "boot" and "su" and reboot. The settings will apply.
You can't change some values while the system is running... that is why there are those errors.

Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?

a_alex_1993 said:
Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?
Click to expand...
Click to collapse
Yeah, it is possible. v6supercharger could change some values that this script change. Try both

I guess both at the same time won't work right?

a_alex_1993 said:
I guess both at the same time won't work right?
Click to expand...
Click to collapse
It should work. I don't see why not
Did you notice any difference using my script?

I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great

a_alex_1993 said:
I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great
Click to expand...
Click to collapse
That is great!

Topic is missleadinng.

dflt said:
Topic is missleadinng.
Click to expand...
Click to collapse
Why? Do you have any suggestion?

You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN

re4lsk said:
You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN
Click to expand...
Click to collapse
I tried that and it didn't work... at least in CM7

dcop7 said:
I tried that and it didn't work... at least in CM7
Click to expand...
Click to collapse
did you changed the permissions?

re4lsk said:
did you changed the permissions?
Click to expand...
Click to collapse
Yeah, or maybe I did something wrong. Did you manage to do that?

Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz

Cedlad said:
Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz
Click to expand...
Click to collapse
I should work!
Just have to edit (or don't use) the lines to change the governor and IO scheduler.
To edit, just put the name of the desired (and available) governor and IO Scheduler

[Q] hack sound or boost sound for s3mini?

Hi everyone, I'm looking for a method to make sound louder in ringtones, notifications, music, I tried several methods but none results.:crying:
I try hack mod
My phone haven't the file default_gain.conf
only one result is a hack camera sound, editing volume.db
I try with volume+ and speaker boost none results..
if anyone knows some method, please can you post it
sorry by my english
my s3mini firmware is I8190XXALL2 I8190OXXALL1 rooted by avicohh
Thanks avicohh :good:

Hi, I have activate in my rom this mod:
XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!
This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.
Thanks and sorry for my bad english ... Then I have enabled init.d support for Stock rom & stock (secure) kernel.
Greeting,
leather.face (formerly Prototyp1981)

leather.face said:
Hi, I have activate in my rom this mod:
XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!
This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.
Thanks and sorry for my bad english ... Then I have enabled init.d support for Stock rom & stock (secure) kernel.
Greeting,
leather.face (formerly Prototyp1981)
Click to expand...
Click to collapse
Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:

Install Instruction for the " xLoud and bravia engine "
Black_Armor said:
Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:
Click to expand...
Click to collapse
Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.
Greeting
Edit: I post in the next 2 hours the instruction with files (zip).
Edit 2:
" Install Instruction "
Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!
xLoud & Bravia Engine by XxXPachaXxX
Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:
Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!
The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.
Once these steps are completed perform a reboot and it should work . Should questions arise, I will help very much further and I hope I could help with this mod.
I send all my credits for this mod to " XxXPachaXxX " !
Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:
Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.
Greeting and I wish all users a nice saturday!
leather.face (Prototyp1981)
PS: Everything should be working then I would appreciate a thank you on the button. :angel:

Works fine Big THX
Gesendet von meinem GT-I8190 mit Tapatalk

Mr_I_Pink said:
Works fine Big THX
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
Hi, I am glad you to hear it. If there are problems, I like to help where I can continue.
Greeting leather.face

Volume+ by Meltus
Sent from Spaceball One.

Thanks leather.face, works well.. :highfive:
Sorry for the delay, I had a lot of work

blackknightavalon said:
Volume+ by Meltus
Sent from Spaceball One.
Click to expand...
Click to collapse
Hi, sorry for my noob question but who is Meltus?
Regards
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
Black_Armor said:
Thanks leather.face, works well.. :highfive:
Sorry for the delay, I had a lot of work
Click to expand...
Click to collapse
Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.
Regards leather.

leather.face said:
Hi, sorry for my noob question but who is Meltus?
Regards
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.
Regards leather.
Click to expand...
Click to collapse
"Meltus" is one of the Android hackers from WAY back when the HTC Dream was still the brand-new iPhone killer who came up with the original volume hacks.

blackknightavalon said:
Volume+ by Meltus
Sent from Spaceball One.
Click to expand...
Click to collapse
Saw volume+ however it says for GB only and not stock firmware.
Has anyone tried the app? noticed any gain?
Thanks!
Sent from my GT-I8190 using xda app-developers app

bOkz said:
Saw volume+ however it says for GB only and not stock firmware.
Has anyone tried the app? noticed any gain?
Thanks!
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
It works on ICS and JB as well. I just tested it on my device.

blackknightavalon said:
It works on ICS and JB as well. I just tested it on my device.
Click to expand...
Click to collapse
Thanks for comfirming!
Did you noticed significant gains?
Thanks!
Sent from my GT-I8190 using xda app-developers app

bOkz said:
Thanks for comfirming!
Did you noticed significant gains?
Thanks!
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Not "significant," but noticeable.

blackknightavalon said:
Not "significant," but noticeable.
Click to expand...
Click to collapse
Gotcha, installing now!
Thanks!
Sent from my GT-I8190 using xda app-developers app

blackknightavalon said:
"Meltus" is one of the Android hackers from WAY back when the HTC Dream was still the brand-new iPhone killer who came up with the original volume hacks.
Click to expand...
Click to collapse
Hi, okay, thanks for your info. Have a nice evening and tomorrow a nice Sunday.
Greeeting

anybody can help me?
leather.face said:
Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.
Greeting
Edit: I post in the next 2 hours the instruction with files (zip).
Edit 2:
" Install Instruction "
Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!
xLoud & Bravia Engine by XxXPachaXxX
Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:
Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!
The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.
Once these steps are completed perform a reboot and it should work . Should questions arise, I will help very much further and I hope I could help with this mod.
I send all my credits for this mod to " XxXPachaXxX " !
Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:
Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.
Greeting and I wish all users a nice saturday!
leather.face (Prototyp1981)
PS: Everything should be working then I would appreciate a thank you on the button. :angel:
Click to expand...
Click to collapse
'Then copy and paste all files in the specified folder' >> where to locate all files inside .zip? i cant found META-INF folder in my device... where is the folder should be?
sorry for the stupid questions because i'm a noob in android. i'm confuse, hoping someone answer me... thanks in advance

for people with low volume, try this http://forum.xda-developers.com/showthread.php?t=2110681
works great in the N version......

Hi,
I lives in france and so i have a volume limit inbuilt on my S3 mini GT-I8190 due to the european law.
I found a tuto for the S3 (at mobilenewspedia) and try to apply it to the S3 mini but i didn't found the default_gain.conf file.
Is your mod a way to disable the european limit ?
Thanks

[TWEAKS] Save your battery without any app!

Hi guys!
I've been trying different kernel and roms at this time, I've been surprised with several of them greatly, but I've always liked my way of setting the cpu frequencies, governor, further reduce the brightness ... etc all WITHOUT USING ANY EXTERNAL APP that consume my internal memory and are constantly running in the background.
Well if you are one of those who leave permanently on your cpu frequency and like to save as much of your battery it will be very useful.
When I tested the Battery Extender 1.5.1 kernel I noticed that every time I restarted my device, the maximum clock frequency was changed to 902 Mhz and I needed tools to control this frequency (as no-frills or set-cpu)... Right, this is the end with the following tweaks, so forget No-Frills and Set-cpu!:
These changes will be adjusted every time you boot the system
Viper The Ripper Tweaks to save battery
What I have changed?
Power off menu and back buttons
Reduced the brightness to maximum
Changed the frequency when the device starts to 245-787 Mhz
Changed the Governor when the device starts to Conservative (I prefer this Governor to save battery)
Working on: CF-Root, BatteryExtender, SpaceKernel, nims11 kernel
Extreme Version
Power off menu and back buttons
Reduced the brightness to maximum
Changed the frequency when the device starts to 245-614 Mhz
Changed the Governor when the device starts to Conservative (I prefer this Governor to save battery)
Working on: BatteryExtender 1.5.1 and up, it should works in SpaceKernel too
CM Versions
Power off menu and back buttons
How to install it?
1. Put the attached file into your sdcard
2. Reboot into recovery
3. Install from sdcard
4. Flash it
5. Reboot
6. Enjoy
Hellyeah!
Credits
Me for having an insatiable curiosity and to hate useless apps
ImbaWind fot helping me
ketut.kumajaya for cf-root adaptation on GB

wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english

DavySML125 said:
wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english
Click to expand...
Click to collapse
Updating in 5 mins
Edit: Updated! Try and test it , It works fine for me (using Stocklite 7.1 + BE 1.5.1 OC)
Edit2: Added Ondemand and SmartassV2 governors

locE
Hi TS,
Tried and tested, not working cm7.2 or I just did something wrong hahaa

loki00001 said:
Hi TS,
Tried and tested, not working cm7.2 or I just did something wrong hahaa
Click to expand...
Click to collapse
I tried in stock rom not in cm 7.2, at the moment only for STOCK ROMS!, sorry my fault

DavySML125 said:
wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english
Click to expand...
Click to collapse
did you use setCpu for cpu settings?

benna said:
did you use setCpu for cpu settings?
Click to expand...
Click to collapse
I'm sure, in my opinion using no-frills or similar apps (sertCpu), you increase the RAM usage with background processes, so your battery will drain faster, anyway you don't need any app to set your cpu frequencies

Updated!
Extreme Versions are here!
Working on: BE 1.5.1 and up, it should works in SpaceKernel too

Updated!
POWER OFF BUTONS in CM7/9/10.x.... it's PERMANENT!
Tested in CM7.2 (The Ultimatum Rom and Revolution X) it should work in CM9/10.x too

Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!

topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Yes, but now it's a bit late. Tomorrow I'll try to provide you a flashable tweak

topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Yes, but now it's a bit late. Tomorrow I'll try to provide you a flashable tweak
But currently you can use the Terminal Emulator to get it just type this lines:
Code:
su
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightne
When you reboot your device the button will power on again so type it after rebooting your phone, but I'll provide you a permanent solution asap

topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Here it is
Test it and report, but it should work fine, then I'll add it at the first post

I did flash it but it didn't work, still having power and menu leds on.

topnotchh said:
I did flash it but it didn't work, still having power and menu leds on.
Click to expand...
Click to collapse
That's strange...ummm

Viper The Ripper said:
That's strange...ummm
Click to expand...
Click to collapse
I did Install ZIP from SDCard, it says tweaks added no error or anything, I rebooted but no changes were applied.

I retried it again and seems like it worked.

topnotchh said:
I retried it again and seems like it worked.
Click to expand...
Click to collapse
I Glad it will work ..It should work but, even I asked to Mardon, the SuperSu can block su request during boot, so it could be the problem, use cmsuperuser variant if you face any problem
Mardon's answer:
Which variant? Supersu or cm superuser?
SuperSu now can block su requests during boot init if wrong configured in supersu.
Click to expand...
Click to collapse
But I see the problem is solved, thank you so much for reporting it

No problem, I installed Universal Init.d from the PlayStore. Then closed phone and retried the zip and it worked. I don't know if its has anything to do with that but its working you can add it to the first page! =)

topnotchh said:
No problem, I installed Universal Init.d from the PlayStore. Then closed phone and retried the zip and it worked. I don't know if its has anything to do with that but its working you can add it to the first page! =)
Click to expand...
Click to collapse
Thank you again
Added!

[Q&A][SUPPORT][5.0.X] CyanogenMod 12 | sprout

THIS IS A Q&A THREAD DEDICATED
TO
CYANOGENMOD 12
BY @varun.chitre15 FOR ANDROID ONE DEVICES​
plz do not spam the development thread by posting questions !!!
For support and troubleshooting of cm12 , kindly post it here ; you will get your Answers .
No one likes to reply and spam thread to a repeated question in development thread ..
NOTE : DO NOT ASK FOR ETA !!!

cm12 beta 2 bugs:-
battery drain (stock battery backup better)
setting-mobile celluler network force close
no crt animation (add plzz)
no option in sim setting for switch 3g to 2g data signal. (like in stock)
thirdparty apps taking time to install (in beta 1 it install quickly)
camera fc on stop recording
bluetooth buggy (hope it will fix in beta 3)
hotspot buggy

K1Ng0r.fTw~ said:
cm12 beta 2 bugs:-
battery drain (sock battery backup better)
setting-mobile celluler network force close
no art animation (add plzz)
no option in sim setting for switch 3g to 2g data signal. (like in stock)
thirdparty apps taking time to install (in beta 2 it install quickly)
camera fc on stop recording
bluetooth buggy (hope it will fix in beta 3)
hotspot buggy
Click to expand...
Click to collapse
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!

Faiyaz5yaz said:
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!
Click to expand...
Click to collapse
ohk thank you so much

Which fix for video recording are you talking about??
Do u mean changing the media_codec.xml file????
I have already tried that but still the camera FC on video recording
I am still wondering if i am the only one who has this bug bcoz no one else has mentioned it.
Already tried making a clean install 3 times but same problem exists

Faiyaz5yaz said:
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!
Click to expand...
Click to collapse
Help me plzz how can i root cm12 ????

K1Ng0r.fTw~ said:
Help me plzz how can i root cm12 ????
Click to expand...
Click to collapse
its prerooted most of the custom roms are prerooted.. :good:

deccen90 said:
its prerooted most of the custom roms are prerooted.. :good:
Click to expand...
Click to collapse
No cm12 by varun is not prerooted -_-

K1Ng0r.fTw~ said:
No cm12 by varun is not prerooted -_-
Click to expand...
Click to collapse
I'm using it build2 rooted man

deccen90 said:
I'm using it build2 rooted man
Click to expand...
Click to collapse
root explorer say root needed for acess :/
---------- Post added at 01:10 PM ---------- Previous post was at 12:29 PM ----------
How to root now??

Alright guys now i m a bit confused i even dont know if I am posting this on the correct thread cause i hear alot that beta2 is laggy so what do you ppl suggest me shall I stay on stock or just flash cm12 beta 2 or 1
Send from my A1 using XDA Free mobile app

Murtaza Gheewala said:
Alright guys now i m a bit confused i even dont know if I am posting this on the correct tread cause i hear alot that beta2 is laggy so what do you ppl suggest me shall I stay on stock or just flash cm12 beta 2 or 1
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
flash beta 2

K1Ng0r.fTw~ said:
flash beta 2
Click to expand...
Click to collapse
And i have to flash root like stock rom
Send from my A1 using XDA Free mobile app

Murtaza Gheewala said:
And i have to flash root like stock rom
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
ya. but i dont know how to root.

deccen90 said:
I'm using it build2 rooted man
Click to expand...
Click to collapse
Can i know how u got root access
Send from my A1 using XDA Free mobile app

Murtaza Gheewala said:
Can i know how u got root access
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
Just give permission when prompted nothing more ...i wonder why you guys asking [emoji15]

I think it's rooted. If its not then flash supersu zip from chainfire
Sent from my A1 using XDA Free mobile app

Thank you for creating this thread now I understood why there is such a mess in development thread ...

Tweaks for data
Some editing in build.prop and you just have to on the aeroplane mode and back to normal mode n you get data ( you have to do it just once, not 3 to 4 times)
Steps :
1. Root the cm12 rom
2. Install any root Explorer or build.prop editor
3. Copy the following in build.prop (don't delete the things that are in it by default)
4. Save and exit
5. Reboot
Editing:
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
pm.sleep_mode=1*
ro.ril.disable.power.collapse=0*
profiler.force_disable_err_rpt=1*
profiler.force_disable_ulog=1*
dalvik.vm.checkjni=false*
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
persist.service.adb.enable=1
ro.telephony.call_ring.delay=0
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
dalvik.vm.dexopt-flags=m=y
persist.service.pcsync.enable=0*
persist.service.lgospd.enable=0
debug.performance.tuning=1
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
touch.presure.scale=0.0001
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
ro.media.enc.jpeg.quality=100
ro.kernel.android.checkjni=0
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1*
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
Hit thanks if I helped you

K1Ng0r.fTw~ said:
root explorer say root needed for acess :/
---------- Post added at 01:10 PM ---------- Previous post was at 12:29 PM ----------
How to root now??
Click to expand...
Click to collapse
use latest supersu.zip