Hi everybody!
I've compiled a script with a few tweaks based on knzo post
This works on CM7, should work on stock also!
I've also added to the script a few lines to change the IO Scheduler and governor. You just have to edit the attachment (unzip it first ) and remove the "#" before the line you want to apply (I've just add the lines depending if you have CM7's stock kernel or huexxx kernel, but you can edit for any kernel, you just have to edit for the governor/io schedulers available or just leave that lines commented).
# change Governor
# Huexxx's kernel
# echo interactivex > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
# change IO Scheduler
# CM7's kernel
# echo "noop" > /sys/block/mmcblk0/queue/scheduler;
# Huexxx's kernel
# echo "sio" > /sys/block/mmcblk0/queue/scheduler;
.....
After this, do this steps:
1 - Install SManager
2 - Open SManager and go to the script, I put it in /data/script
3 - Single click the script "74diogo" and check "Su" and "Boot" and then save.
4 - Just reboot.
Note: It could take a minute or two to change the governor in Cyanogenmod settings.
That is it!
Feel free to leave to give your feedback
By the way... When I changed the default governor via CM settings and applied at boot, the phone becomes very slow in the first minute after boot...
Changing the governor with this script, that slow performance disappears
Also, you can activate JIT, use 16 bit transparency and disable scrolling cache (force disable) for a little speed and smooth...
I get a lot of not found errors is that normal? And also a lot of permission denied.
a_alex_1993 said:
I get a lot of not found errors is that normal? And also a lot of permission denied.
Click to expand...
Click to collapse
Yeah. You should choose the option "boot" and "su" and reboot. The settings will apply.
You can't change some values while the system is running... that is why there are those errors.
Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?
a_alex_1993 said:
Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?
Click to expand...
Click to collapse
Yeah, it is possible. v6supercharger could change some values that this script change. Try both
I guess both at the same time won't work right?
a_alex_1993 said:
I guess both at the same time won't work right?
Click to expand...
Click to collapse
It should work. I don't see why not
Did you notice any difference using my script?
I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great
a_alex_1993 said:
I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great
Click to expand...
Click to collapse
That is great!
Topic is missleadinng.
dflt said:
Topic is missleadinng.
Click to expand...
Click to collapse
Why? Do you have any suggestion?
You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN
re4lsk said:
You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN
Click to expand...
Click to collapse
I tried that and it didn't work... at least in CM7
dcop7 said:
I tried that and it didn't work... at least in CM7
Click to expand...
Click to collapse
did you changed the permissions?
re4lsk said:
did you changed the permissions?
Click to expand...
Click to collapse
Yeah, or maybe I did something wrong. Did you manage to do that?
Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz
Cedlad said:
Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz
Click to expand...
Click to collapse
I should work!
Just have to edit (or don't use) the lines to change the governor and IO scheduler.
To edit, just put the name of the desired (and available) governor and IO Scheduler
Related
Hi all,
since knzo have decided to stop developing Nova v7 despite certain little bugs, I've decided to create my own post to share with you a package to solve all the solvable bugs until the date.
In this first version, the flashable package contain/solves:
- SmartassV2 governor Issue (with modified nova script).
- Updates Superuser 3.0 from Beta3 to Beta4 and /system/bin/su permissions set to 7777.
- Autoset I/O Scheduler on boot (with modified 11nov init.d script).
http://dl.dropbox.com/u/4629711/nova opt/huexxx-nova7-twk-v1.zip
(MD5: 004bedbdd3cec21779af2538d32f75c4)
Problems with Superuser? Try some of the following packages. First mantain 3.0 Beta3 and second contains the latest stable version. Both with su permissions set to 7777.
http://dl.dropbox.com/u/4629711/nova opt/huexxx-nova7-twk-v1-beta3.zip
(MD5: 3e93990b79bf8c2d70001c4d3f72babf)
http://dl.dropbox.com/u/4629711/nova opt/huexxx-nova7-twk-v1-stable.zip
(MD5: 4373fb38d9f8fac857ed77b046285ffe)
Instructions: Put it onto sdcard root and flash it whrough CWM.
I tried the package and working ok but I am not responsible for any damage that may result in your devices.
So many thanks to Antonio1475 and knzo, good work dudes! ... and thanks to all who have helped into Nova project!
I hope this thread will please everyone involved.
Regards!
Meh, even though I know the bugs are there and I can fix them, I just said it wasn't worth a new version.
For now at least. If more appear, I can release another one.
I'm tired.
You could rename it to v7.1 patch by the way, I'm fine with it. It's more of a bug-fixer than optimizer!
P.S. It's the I/O sched autoboot feature that was fixed, not governor.
which i/o is best? what are the differences between them?
thank you, all is going well so far
No need to new versions IMHO. The work is done.
Relax and rest for 2.3 arrive...
Feel free to take it, rename it and post onto nova's thread, it's in your hands.
Optimizer is not the word i guess too... i'll rename it.
I hope to release new versions with true opts or enhanced existent features.
Regards.
Sent from my LG-P970 using XDA App
IMHO InteractiveX is the best, but i don't mind lower performance but better battery last.
There are explanations inside nova's thread. Use the search...
Sent from my LG-P970 using XDA App
Huexxx, he was talking about I/O Scheduler, not governor.
Sent from my LG-P970 using xda premium
do i have to wipe all data? and install this?
memeru said:
do i have to wipe all data? and install this?
Click to expand...
Click to collapse
no men
just flash it
whats the different between the two
memeru said:
whats the different between the two
Click to expand...
Click to collapse
read 1st post plz
Sobralobo said:
Huexxx, he was talking about I/O Scheduler, not governor.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Ops... I'm not used to tapatalk!!!
v(r) seems to be the best overall but with ups and downs in performance while sio is more consistent performance.
Try them for yourself... if you don't see the difference... both are good for you.
From what I've read on the main Nova ROM thread, on v7 for Froyo, WiFi meter readings do not correspond to true signal strength. This is due to the more important tweaks knzo did.
Just a thought, if those tweaks weren't in older versions (such as v4.5, which is imho, already a fast version, but WiFi signal readings are true), is it possible to modify Nova v7 (meaning, ditch the tweak or tweaks that make signal readings erratic) so that WiFi readings are true without ruining the performance?
It's possible... when I know which tweak has generated it and where is it...
After applying this patch has increased the power consumption of the system (in Тутор the System process and the Kernel). In a Terminal at one and the same Governor SmartassV2. Returned to made a backup.
PaulBort said:
After applying this patch has increased the power consumption of the system (in Тутор the System process and the Kernel). In a Terminal at one and the same Governor SmartassV2. Returned to made a backup.
Click to expand...
Click to collapse
Aha,
then:
- modify a caracter at nova in order to operate well with SmartassV2 (the same if you had applied the smartass patch, and you had already applied it because you are using it before according to your probes)
- modify a caracter at 11nov in order to set iosched on autoboot (if the same iosched is set, its the same)
- change superuser beta3 to beta4 (in your case you already have beta4 because freezing with beta3)
makes a difference in power compsumption at your OB...
You have different power comsumptions at different moments, I'm sure it isn't by the patch itself... because you had all implemeted yet!
Huexxx said:
Aha,
- change superuser beta3 to beta4 (in your case you already have beta4 because freezing with beta3)
Click to expand...
Click to collapse
Yes, I do patch SU yesterday, today - do your patch, but freezing (black screen when the application is started) sometimes present.
PaulBort said:
Yes, I do patch SU yesterday, today - do your patch, but freezing (black screen when the application is started) sometimes present.
Click to expand...
Click to collapse
Certainly the included versión (Beta4) is not the same as knzo's version (the date soesn't match) so i've created an alternative package for all who have problems with su.
Regards.
ajcantonio said:
From what I've read on the main Nova ROM thread, on v7 for Froyo, WiFi meter readings do not correspond to true signal strength. This is due to the more important tweaks knzo did.
Just a thought, if those tweaks weren't in older versions (such as v4.5, which is imho, already a fast version, but WiFi signal readings are true), is it possible to modify Nova v7 (meaning, ditch the tweak or tweaks that make signal readings erratic) so that WiFi readings are true without ruining the performance?
Click to expand...
Click to collapse
Hi there, I've already tried that method, modifying Nova v4.5 with kernel v7. first time try, I don't get overclock, still the same 1 GHz, and the WiFi signal still the same. But I notice that actually it work (even on Nova v7), the signal update in minutes. I've test it, if the phone connected to AP, wait for a minutes, and the signal will full. Then, go a little far away from AP, then the signal updates to low signal also in a minutes.. Well I don't know what's the problem.
Second try, I include overclock_p970_22.ko from Nova v7 (which I don't include it at first try), but it hang/freeze after come to "desktop". Well, it mean that v4.5 and v7 are not compatible
So I release battery, start it again, and go to recovery mod, and apply Nova v4 and v4.5 to have normally system. And when I came back to this forum, I see post that contain fix for Nova v7. Well, I have to try it
Thanks Huexxx, will trying it... Here we go with another night flashing and flashing again
Huexxx said:
IMHO InteractiveX is the best, but i don't mind lower performance but better battery last.
Click to expand...
Click to collapse
Well the same as i was.. I use InteractiveX that I think had more battery..
First post modified again...
The su fix from knzo only repush the program and set different permissions.
I've created three posibilities: beta4, beta3 ans latest stable.
I'll look into wifi problem.
Regards!
No wifi problem here.
And superuser works fine
Sent from my LG-P970 using xda premium
As the title, is the v6supercharger or slaidyboost better?
a121232 said:
As the title, is the v6supercharger or slaidyboost better?
Click to expand...
Click to collapse
You can't compare both man. They are completely different scripts...
V6 - is a memory management script. It fixes LMK and OOM values so that apps don't run in background. Soon ultimately this may increase the overall battery.
Slaid - its a better script as it has many different features like smoothness, lag fix, battery tweaks, fast boot, etc. So if u want overall increase in performance... Go for this.
Adrenaline shot - similar to slaid but with some changes in code. Its here in dev section if not, go to Ace dev section and ask the Guy who wrote this to make changes for our mini.
Hope it helped you
freakyfriday said:
You can't compare both man. They are completely different scripts...
V6 - is a memory management script. It fixes LMK and OOM values so that apps don't run in background. Soon ultimately this may increase the overall battery.
Slaps - its a better script as it has many different features like smoothness, lag fix, battery tweaks, fast boot, etc. So if u want overall increase in performance... Go for this.
Adrenaline shot - similar to slaid but with some changes in code. Its here in dev section if not, go to Ace dev section and ask the Guy who wrote this to make changes for our mini.
Hope it helped you
Click to expand...
Click to collapse
Can you tell me the easiest way to use v6supercharger?
a121232 said:
Can you tell me the easiest way to use v6supercharger?
Click to expand...
Click to collapse
Download and install script manager
Download V6 script from xda
Put it SD card
Open script manager app and find v6 script
Open it
Then a screen will pop up showing various options
Choose root option (icon with su icon) , save it
Hit execute
V6 will start running.
Choose option 7 ( 512 HP - aggressive. )
Super clean and restart.
That's. It ( it will take a long time to boot don't worry u dint brick ur phone
Optional ---
SM Widgets
KickAss kernel
NitroLag boot
3G Turbo boost
Enjoy and hit thanks coz I m really lazy still I wrote this down for someone, I dont even know lol
Thanks @freakyfriday
Nice post, I never install v6 till now but because of u I try it now
JoK€R said:
Thanks @freakyfriday
Nice post, I never install v6 till now but because of u I try it now
Click to expand...
Click to collapse
Good to be of help... do give it a try coz its a very good script..
what is slaps?
Sent from my GT-S5570
droidface said:
what is slaps?
Sent from my GT-S5570
Click to expand...
Click to collapse
Lolll sorry buddy it was a mistake...I use t9 to type so I forgot to correct slaid, which was misspelled as slap..
When I open script manager, I got disconnect from it. Why?
Can you tell me how to install the optional packs by using terminal emulator?
Did u install the busybox yet? Try install it and choose ver 1.18.xx and try again, i have no problem when i use it
a121232 said:
When I open script manager, I got disconnect from it. Why?
Can you tell me how to install the optional packs by using terminal emulator?
Click to expand...
Click to collapse
Usd BusyBox Installer..it recquires root...there are many versions so choose the one with 600kb size not 5mb app as far as I remember..
I use busybox 1.18.2 @@
has anyone tried to use slaidy boost with CM 7.2 RC 5.7?
should i delete previous default script before flashing it?
Hi guys!
I've been trying different kernel and roms at this time, I've been surprised with several of them greatly, but I've always liked my way of setting the cpu frequencies, governor, further reduce the brightness ... etc all WITHOUT USING ANY EXTERNAL APP that consume my internal memory and are constantly running in the background.
Well if you are one of those who leave permanently on your cpu frequency and like to save as much of your battery it will be very useful.
When I tested the Battery Extender 1.5.1 kernel I noticed that every time I restarted my device, the maximum clock frequency was changed to 902 Mhz and I needed tools to control this frequency (as no-frills or set-cpu)... Right, this is the end with the following tweaks, so forget No-Frills and Set-cpu!:
These changes will be adjusted every time you boot the system
Viper The Ripper Tweaks to save battery
What I have changed?
Power off menu and back buttons
Reduced the brightness to maximum
Changed the frequency when the device starts to 245-787 Mhz
Changed the Governor when the device starts to Conservative (I prefer this Governor to save battery)
Working on: CF-Root, BatteryExtender, SpaceKernel, nims11 kernel
Extreme Version
Power off menu and back buttons
Reduced the brightness to maximum
Changed the frequency when the device starts to 245-614 Mhz
Changed the Governor when the device starts to Conservative (I prefer this Governor to save battery)
Working on: BatteryExtender 1.5.1 and up, it should works in SpaceKernel too
CM Versions
Power off menu and back buttons
How to install it?
1. Put the attached file into your sdcard
2. Reboot into recovery
3. Install from sdcard
4. Flash it
5. Reboot
6. Enjoy
Hellyeah!
Credits
Me for having an insatiable curiosity and to hate useless apps
ImbaWind fot helping me
ketut.kumajaya for cf-root adaptation on GB
wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english
DavySML125 said:
wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english
Click to expand...
Click to collapse
Updating in 5 mins
Edit: Updated! Try and test it , It works fine for me (using Stocklite 7.1 + BE 1.5.1 OC)
Edit2: Added Ondemand and SmartassV2 governors
locE
Hi TS,
Tried and tested, not working cm7.2 or I just did something wrong hahaa
loki00001 said:
Hi TS,
Tried and tested, not working cm7.2 or I just did something wrong hahaa
Click to expand...
Click to collapse
I tried in stock rom not in cm 7.2, at the moment only for STOCK ROMS!, sorry my fault
DavySML125 said:
wooaaa..nice info..
just share,
if i'm on stock..i use battery extender 1.2..with defaut seting of brighness n i set cpu min 245 max 800 smartassv2 n noop
with normal using,whatsapp,facebook n etc bout 1-3hr full online totally,i had 27 - 30hr until my battery 0..n thats enough for me..
sorry for my bad english
Click to expand...
Click to collapse
did you use setCpu for cpu settings?
benna said:
did you use setCpu for cpu settings?
Click to expand...
Click to collapse
I'm sure, in my opinion using no-frills or similar apps (sertCpu), you increase the RAM usage with background processes, so your battery will drain faster, anyway you don't need any app to set your cpu frequencies
Updated!
Extreme Versions are here!
Working on: BE 1.5.1 and up, it should works in SpaceKernel too
Updated!
POWER OFF BUTONS in CM7/9/10.x.... it's PERMANENT!
Tested in CM7.2 (The Ultimatum Rom and Revolution X) it should work in CM9/10.x too
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Yes, but now it's a bit late. Tomorrow I'll try to provide you a flashable tweak
topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Yes, but now it's a bit late. Tomorrow I'll try to provide you a flashable tweak
But currently you can use the Terminal Emulator to get it just type this lines:
Code:
su
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightne
When you reboot your device the button will power on again so type it after rebooting your phone, but I'll provide you a permanent solution asap
topnotchh said:
Hey do you know if you can power off menu and back button in Mardon ROM?
http://forum.xda-developers.com/showthread.php?t=2212438
Thanks!
Click to expand...
Click to collapse
Here it is
Test it and report, but it should work fine, then I'll add it at the first post
I did flash it but it didn't work, still having power and menu leds on.
topnotchh said:
I did flash it but it didn't work, still having power and menu leds on.
Click to expand...
Click to collapse
That's strange...ummm
Viper The Ripper said:
That's strange...ummm
Click to expand...
Click to collapse
I did Install ZIP from SDCard, it says tweaks added no error or anything, I rebooted but no changes were applied.
I retried it again and seems like it worked.
topnotchh said:
I retried it again and seems like it worked.
Click to expand...
Click to collapse
I Glad it will work ..It should work but, even I asked to Mardon, the SuperSu can block su request during boot, so it could be the problem, use cmsuperuser variant if you face any problem
Mardon's answer:
Which variant? Supersu or cm superuser?
SuperSu now can block su requests during boot init if wrong configured in supersu.
Click to expand...
Click to collapse
But I see the problem is solved, thank you so much for reporting it
No problem, I installed Universal Init.d from the PlayStore. Then closed phone and retried the zip and it worked. I don't know if its has anything to do with that but its working you can add it to the first page! =)
topnotchh said:
No problem, I installed Universal Init.d from the PlayStore. Then closed phone and retried the zip and it worked. I don't know if its has anything to do with that but its working you can add it to the first page! =)
Click to expand...
Click to collapse
Thank you again
Added!
Hey xda-community .
I'm new in rooting and have some questions ^^.
I have a S Advance i9070 (with JellyMod4) and want to know your experiences with the v6supercharger and cocore8.
Btw: is setcpu needed or is the script and cocore doing all it self ?
(And did someone got the aosp browser from 4.3 on the i9070 to work ?)
Greets, misterNewbee
Sent from my GT-I9070 using xda app-developers app
MisterNewbee said:
Hey xda-community .
I'm new in rooting and have some questions ^^.
I have a S Advance i9070 (with JellyMod4) and want to know your experiences with the v6supercharger and cocore8.
Btw: is setcpu needed or is the script and cocore doing all it self ?
(And did someone got the aosp browser from 4.3 on the i9070 to work ?)
Greets, misterNewbee
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I advice to you to flash harsh jelly 3.0 with cocore. Performance are awesome
You have to use set cpu or nofrills when you want to change the governors and I/O scheduler, if not, don't use them
For the browser..I think not
maurus1998 said:
I advice to you to flash harsh jelly 3.0 with cocore. Performance are awesome
You have to use set cpu or nofrills when you want to change the governors and I/O scheduler, if not, don't use them
For the browser..I think not
Click to expand...
Click to collapse
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu (or no-frills) ?
And what does the harshjelly tweaker do ?
(How to understand tweaks ? :/)
Thank you for the answers :thumbup:
MisterNewbee said:
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu or no-frills ?
To the governors and i/o sheduler, can you recommend me some ?
And what does the harshjelly tweaker do ?
(How to understand tweaks ? :/)
Thank you for the answers :thumbup:
Click to expand...
Click to collapse
Yes with set cpu you can only change gov and io and I prefer using pegasusq and sio as scheduler.
Harsh tweaker is an app that has some tweaks like disable or enable the crt effect, to enable or disable cache scrolling, enable logging, enable 360º rotation,enable the long press to kill and other tweaking
There is always in harsh jelly a command that you can write in the terminal emulator (typing harsh_controls) that can do some very useful things like zipalingn all the apps, vacuum and reindex you databases (it makes your phone less 'dirty' and so it makes the acces in the databases faster) ,enable or disable fsync (fsync off can improve performance but you ll have data loss if power goes out suddently, recomend to turn it on) and other little commands
Mr.harsh has done a very great work making this rom! Let's try it
Press thanks botton if i helped you:beer:
Inviato dal mio GT-I9070 con Tapatalk 2
MisterNewbee said:
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu (or no-frills) ?
Click to expand...
Click to collapse
for me,i set the cpu using script.. load it at boot using script manager..
lawong said:
for me,i set the cpu using script.. load it at boot using script manager..
Click to expand...
Click to collapse
Good to know that this is possible too ;D. Are in the i9070 forum some scripts or have i to make them myself ? And do someone use the v6 supercharger script ?
Sent from my GT-I9070 using xda app-developers app
MisterNewbee said:
Good to know that this is possible too ;D. Are in the i9070 forum some scripts or have i to make them myself ? And do someone use the v6 supercharger script ?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
use the below script to
#to change the scheduler
echo "sio" > /sys/block/mmcblk0/queue/scheduler
#to change the governor
echo "ondemandq" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
don't use windows text editor like text pad.. insted use use notepad++ and the file should have no extension.
Create a new folder named 'init.d' in /system/etc
then push the file using a root explorere to the folder
Set the permission of init.d foler and the script file to 0777(rwxrwxrwx)
u can also search the forum for other commands which can be used to tweak the governor like the scaling frequency and other stuff
check http://forum.xda-developers.com/showthread.php?t=2198510
Hey @ all.
I'm using Vanir atm and I have activated the navbar instead of the standard soft keys.
I disabled the function of them in the keychars and that's working but every time I set the max brightness of the button backlights under /sys/class/leds/button-backlight to 0 and restart its back to 255.
I tried to write a init.d script with this:
#!/system/bin/sh
echo 0 > $sys/class/leds/button-backlight/max_brightness
Anybody has got some tips for me?
Appreciate your help
Sent from my 4X HD via XDA Premium
if anyone answer to that , id love to see how its done me im trying to modify the governor without it getting reset. Also i tried the init.d
so anyone knows which file or script is responsible for the reset after reboot
There's an SQLite database you can edit since Vanir has framework support for this setting, but the interface just isn't in the settings app yet.
I'll edit with details in a second.
kessaras said:
if anyone answer to that , id love to see how its done me im trying to modify the governor without it getting reset. Also i tried the init.d
so anyone knows which file or script is responsible for the reset after reboot
Click to expand...
Click to collapse
What´s the problem. You have in Vanir Rom in settings the option "performance" where u can set the governor and choose to set at boot. Also scheduler and frequencies...
Bogeyof said:
What´s the problem. You have in Vanir Rom in settings the option "performance" where u can set the governor and choose to set at boot. Also scheduler and frequencies...
Click to expand...
Click to collapse
i didnt say i cant change governor. i said i MODIFY the governor....
kessaras said:
i didnt say i cant change governor. i said i MODIFY the governor....
Click to expand...
Click to collapse
Make your own thread.
For the OP, you need to edit settings.db for com.android.providers.settings
In the system table, add a row with the name as 'button_brightness' and value as 0.
arararagi said:
Make your own thread.
For the OP, you need to edit settings.db for com.android.providers.settings
In the system table, add a row with the name as 'button_brightness' and value as 0.
Click to expand...
Click to collapse
Will have a look when I'm not that busy anymore.
Thanks
Sent from my 4X HD via XDA Premium