Hi, quick question. Can anyone confirm if the official 2.3.5 update through Kies Mini includes flashing gingerbread bootloaders? Until recently I've only run KB1 roms, but I now have CM7.1.
Briefly, I used Odin3 1-click to go to UCJF6, did a master clear, then used Kies Mini to go from 2.1 to 2.2 then 2.3 as per instructions. After that I went right to CM7.1 with no issues other than the expected bootloop after flashing the speedmod kernel which was resolved by flashing the rom.
BTW, I'm finding CM7.1 as solid and stable as I would ever need. (The main reason I stuck with KB1 releases for so long.) Many thanks to all the developers, maintainers, etc. for keeping the captivate alive.
Yeah to even run a STOCK GB rom you are required GB BL's... It won't boot without it...
And Why do you flash the speedmod on 2.1?! that was changed a long time ago...
Thanks for the reply. I went back to 2.1 because I hadn't come across Odin3 for 2.2. I was actually on 2.3 when I flashed the speedmod (according to what I read it is now safe to go this route.)
Ohh yahh, but you can One click to JF6, then flash the BL only ODIN, then it will reboot to recovery, apply update.zip, and flash from there!
OK, thanks. I'll remember that for future reference. Just wanted to confirm where I was at because apparently there is no straightforward way even through adb of checking your current bootloaders.
Related
I had some issues with the phone (i9000t) not wanting to boot without being plugged in. They first appeared on Doc's ROM (just started one day. Had been working fine for weeks) and persisted even after flashing various stock 2.1 and 2.2 roms.
After I flashed the Gingerbread Beta(samfirmware), the problem went away. After that, I decided to try and flash a 2.2 rom again to see if it would work; it didn't. I'm not too thrilled about the amount of RAM that Gingerbread is using and my battery life is crap, so I'd like to go back to a Froyo rom, but I really don't want to deal with the phone not turning on.
Anyone know if it's possible to flash a Froyo ROM with the Gingerbread bootloader? Even better, anyone know of a fix for this bootloader issue?
nathanism said:
I had some issues with the phone (i9000t) not wanting to boot without being plugged in. They first appeared on Doc's ROM (just started one day. Had been working fine for weeks) and persisted even after flashing various stock 2.1 and 2.2 roms.
After I flashed the Gingerbread Beta(samfirmware), the problem went away. After that, I decided to try and flash a 2.2 rom again to see if it would work; it didn't. I'm not too thrilled about the amount of RAM that Gingerbread is using and my battery life is crap, so I'd like to go back to a Froyo rom, but I really don't want to deal with the phone not turning on.
Anyone know if it's possible to flash a Froyo ROM with the Gingerbread bootloader? Even better, anyone know of a fix for this bootloader issue?
Click to expand...
Click to collapse
I have bootloaders in my stash.
I have flashed them and there was no problem.
Link to my stash in my sig.
Flash a stock rom with Odin, 512 PIT + repartition.
When I have a problem I'm flashing JM9 (2.1 rom) back that way and everything works as intended after that and I can upgrade to any Froyo custom rom error free.
Works great with CM7 too.
Did the 2.2 ROM you flashed over the gingerbread beta have its own bootloader? If not, try flashing a 2.2 ROM that comes with a bootloader. Both XXJPU and ZSJPJ from samfirmware.com come with bootloaders. Try those first.
Hi. I wanted to get a quick taste of Gingerbread a month or so ago, and tried the RC release of Darky's 10 version rom (I flashed RC3, and haven't installed anything newer after that).
Since then, lots of progress has been made on CM7/MIUI front. I want to try them. Thing is, all of the tutorials (both for CM7 and MIUI) say something like "make sure You have Froyo bootloaders" or something similar. And I have Android 2.3.3 right now. Do I need to downgrade to some kind of Froyo rom first? I am scared of doing this alone unguided - I almost bricked my phone once when flashing Darky's v10 through Odin.
Help appreciated!
PS The process looks generally the same for both MIUI and CM7, right? That's why I put them both in this thread.
PPS I don't care about my data - it can all get wiped.
Yeah you need to flash a froyo with FROYO BOOTLOADERS Make sure you do this. Go to samfirmware and get I think it was JPU or whichever has the bootloaders. After that flash speedmod froyo kernel. Then make a backup.
Once you do that, get ROM manager in the market and select CM7. If you don't want to buy Rom manager (you should though because it will make updating to the nightlies very easy) go to CWM and flash normally
Easy wasn't it
Easiset way to make sure that you have Froyo bootlaoders installed:
Flash EZBase - this can be found here: http://forum.xda-developers.com/showthread.php?t=991792&highlight=Ezbase
Then simply download the files required and forllow the relevant instructions for that particular rom.
I flashed my phone with CM7 successfully with the help of EZBase! Thanks!
I'm having a bit of trouble with Odin one-click. Last night I decided to upgrade from Perception 10.4 (Froyo based) to Perception 2b3 (Gingerbread based). I plugged it in, put it into download mode, and activated Odin. It ran just fine, but at the end, my phone rebooted into a boot loop. I ended up putting together a jig to get it back into download mode, and tried again. Same thing happened. I eventually ended up using a Froyo Odin to qwerty least get it working again. Does anyone have any ideas as to why Gingerbread Odin soft bricks my phone, and what I should do to fix it? Let me know if you need any more details. Thanks in advance.
I know this would do better in the odin thread, but I don't have enough posts to post there, mending the fact that I've been lurking around for close to a year
Guess I'll just keep posting here until a) someone responds or b) I have enough posts to ask in the proper thread
I'd ready like to be able to get my cappy running Gingerbread tonight. Anyone have any ideas?
What one click are you taking about? Is it this one?
http://forum.xda-developers.com/showthread.php?t=731989
If it is, this will take you to stock eclair. Not sure what ur talking about with one click froyo. There is a one click GB from Design Gears in the development section. It flashes the newest release of GB stock. If you can get into dl mode you can flash either of the one click odins, but read about both before you do. Bootloaders are involved, and if you don't know about them they can be trouble. Read in development section.
This is a link to one click for GB stock. CONTAINS BOOTLOADERS.
http://forum.xda-developers.com/showthread.php?t=1127249
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry, for some reason can't get that second link to work properly. Doing this from my phone. Just type in the url. If you decide to flash this GB oneclick, you'll be on the kf1 "official" release. Check dev section and you can flash beta cognition if you want. People are having great results with this rom, including myself. Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
I recommend flashing the KF1 odin one-click. I just flashed that one, and it worked like a champ. Its in the Continuum v6 thread at http://forum.xda-developers.com/showthread.php?t=1136128. If you read the instructions it will work flawlessly. The only odin problems I've ran into have been user induced.
Okay, I'll try out that KF1. All I really need it for is to get the bootloaders so I can install other 2.3 roms. Will this work for that?
The Froyo Odin I was tackling about was just an older version, I think.
Edit: Why is it so much more difficult to go from 2.2 to 2.3 than it was going from 2.1 to 2.2? Upgrading to 2.2, I just had to use CWM to flash the new rom onto the phone.
Okay, I was trying to follow the instructions in the Continuum thread, and it looks like I am supposed to go back to Eclair before flashing Continuum. I was using this one-click Odin, and it was causing my phone to softbrick. No idea why. Will I be able to use that KF1 Odin to get to Gingerbread, then flash other GB based roms?
And by the trouble caused by bootloaders, you just mean how it will hardbrick if it loses connection in the middle of flashing, right? Or is there more. I've been switching out roms on phones for a while now, but it hasn't been this complex before...
If you mix bootloaders, you will hard brick ur phone. 2.1/2.2 roms have the same bootloaders. GB boots are different. That's why there is more involved to flash GB roms. Basically all the GB roms are I9000 based roms. The kf1 is an i897 based stock rom. If you flash kf1 stock rom, you will lose cwm. You can try cog beta 2 rom if you would like. After following steps to flash GB bootloaders with link mentioned above, check dev section. There are currently 2 kf1 custom roms. I use the cog beta 2, and it works great. people have mentioned that they have flashed i9000 roms over kf1, but I personally haven't, cuz so far cog beta is working great and the call quality is outstanding compared to any of the i9000 roms. Read read read read, before taking any steps. You don't want to ruin it phone! If you want to flash i9000 based GB, read this:
http://forum.xda-developers.com/showthread.php?t=1045734
Btw, what build is ur phone? (4 digit number under battery). Some builds, especially 1010 have trouble with oneclick.
Sent from my SAMSUNG-SGH-I897 using XDA App
So it sounds like what I need to do is use that KF1 Odin, then I can flash other roms over that? How can I tell which custom roms are KF1? Is Perception KF1 based? What would you recommend I read to make sure I'm doing it right? Are there specific threads that are especially helpful for this? Thanks for all of the help, I'd really like to learn how to do this.
It'll say in the title. Liked I said, currently there are only two kf1 based roms. Cog beta and another one that I can't remember the name of. If it says something in the title besides kf1/or i897, it's for i9000. Ex/ jvh, jvo, jvp are all i9000 based.
Sent from my SAMSUNG-SGH-I897 using XDA App
What do I need to do if I want to use a non-KF1 based GB rom? I've been very happy with Perception, and I'd like to keep using it.
If you want to flash GB stock that is based off of I9000 read and follow this, step by step:
http://forum.xda-developers.com/showthread.php?t=1045734
After you do this you can flash GB roms via cwm.
If you want to flash GB with kf1, you can, and people have been running I9000 based custom roms on the same bootloaders. JUST MAKE SURE YOU CHECK ANY ROM YOU'RE FLASHING TO SEE IF IT INCLUDES BOOTLOADERS. I personally haven't run any I9000 roms after flashing kf1, but I believe if you want to do this, (NOT POSITIVE ABOUT THIS, SO YOU MIGHT WANT TO RESEARCH THIS FIRST) you would have to flash an appropriate I9000 kernel using odin (not oneclick, but the full version). Put the kernel in the PDA slot, uncheck repartition, and auto reboot and flash. That way you will get cwm 2 or3 back which will enable you to flash the rom you want. (Remember, with stock KF1 you lose cwm). After kernel flashes, boot ONLY into recovery, and flash rom that you put on your SD card before doing any of this, and flash via cwm. AGAIN, NOT POSITIVE THIS IS WHAT YOU DO, SO RESEARCH.
That makes a lot more sense than the instructions I was trying to follow. I'll try that in a bit.
It worked! Thanks for all of your help
What did you end up doing? GB I9000 stock, or kf1 then flash I9000 custom rom over it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I used the I9000 GB stock rom from that link you posted, then flashed a custom rom over it. I ended up using Perception 2 beta.
Glad it worked for you.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey guys so I managed to upgrade my ROGERS captivate to stock 2.3.3
and succesfully rooted it. And I'm noticing lags and in general, it's slower than my older stock 2.2 with One Click Lag Fix..
I used to score almost 2k on 2.2
but now with rooted 2.3.3 I only score 1k. Is there some sort of lagfix I can do to make it less laggy and more fluid/smooth? Or should I just go back to stock 2.2 and lag fix it?
No Only 2.3.3 native rom to use lag fix was Cognition 5. That was KF1.
Uhm what does that mean? I'm kind of new.. so is that a custom ROM or something? if it is, can I flash it on a ROGERS captivate?
Any rom made for or ported to I897 would work on your I896. If you are going to move to a rom I would recommend Fasty KI2 that has Voodoo, or Fusion roms.
Thank'd
this is what you're talking about right?
http://forum.xda-developers.com/showthread.php?t=1283828
I kind of know how to flash custom ROM's but I'm not sure what
"YOU MUST HAVE GB BOOTLOADERS" means >.>
I know that I have to get stock 2.1 and root it and then flash it...
No dont go back to stock. If you want flash a stock KI2 or KH3 with out bootloaders and use Boog's cwm kernel and flash fasty.
uhm.. to be honest I don't really know what that means @[email protected]
but wouldn't this work?http://forum.xda-developers.com/showthread.php?t=884364
I'm thinking just getting stock 2.1 then rooting it and then flashing...
seems more simple o:
so would this work?
For froyo roms ya. For Gingerbread is a whole other can of worms. If you are already on Gingerbread then just flash a kernel with cwm (not sure what gb you are on) and factory reset, wipe cache, wipe Dalvik and flash rom.
I tried installing CWM recovery with ROM manager but
when i press it it says confirm phone model and
galaxy s i9000, nexus and other phones show but not
captivate.. and which kernal do I have to flash?
Read READ READ READ READ READ and read some more. If you don't know what gb bootloaders are that should at least have 15min of reading by it self. Also, read the stickies (the posts with thumbtacks) in the development section.
Rom manager is useless. You need too flash a Kernel with CWM cooked in it. With either kernel flasher (app), ODIN or Heimdall.
T-T I poked around and read some threads.. but I'm not sure what my GB bootloaders are T-T i'll list some stuff and maybe that is the GB thing
PDA:1896UXKH2
PHONE:1896UXKH2
CSC: I896RWCKH2
T-T
so I just find any kernal with CWM and then flash it using odin?
and if i do use odin do i use .pit file?
You are on Rogers Gingerbread. You have GB bootloaders. Flash KH3 with out bootloaders found here, Then flash kernel found here (use the ODIN KH3 one). Use CWM do a factory reset, wipe cache and wipe Dalvik cache then flash Fasty or wich ever rom you like and Profit. If you going to use a Fasty with Voodoo, these kernels take a long time to boot and if voodoo is enabled you will hear chirping and take even longer.
This ins't the only way, its what I would do atleast.
Thanks so much I'll try it as soon as I get home
Sent from my SGH-I896 using XDA App
Uhm.. you put the same links twice i think both of them are
http://forum.xda-developers.com/showthread.php?t=1233620
Kernel is this. You can use the search in the dev section.
Thanks! I'm going to try it now
I'll post results shortly after
I successfully flashed kernal and I hace cwm recovery now but
I can't download the fantasy 3 :/ the link is broken..
Fantasy? Im going to assume Fasty?
Edit: it seems his site is down. Going to have to wait for it.
yea I meant fasty*
I guess I'll have to wait then since fasty looks like the best option out there :/
OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
No need to flash the bootloaders, you have the gingerbread ones thanks to kies, they work worth EVERYTHING so you do not need to ever flash bootloaders again.aahs i digest you don't, Cause flashing those is the only tine you cab hard brick.
Flash corn kernel with Odin right now on gingerbread, then boot into recovery factory reset and format /system, and flash the ics ROM twice. Bingo bango you're done.
Thanks. I'm just switching from a Sony X10 so things are a little different here. Every guide said start at 2.1 so I didn't think i could flash from GB. I want to try ICS, but the X10 builds are still alphas.
Sent from my SAMSUNG-SGH-I897 using XDA
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
capocaccia said:
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
Click to expand...
Click to collapse
some people have reported that gingerbread bootloaders work with Cyanogenmod
He meant flash from CyanogenMod or any other MTD ROM to BML ROM
Again, thanks for the info. Maybe I'll write an updated guide after I get accustomed to this phone and ODIN. Flashtool for the X10 definitely spoiled me.
jfalgout2003 said:
OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
Click to expand...
Click to collapse
I have successfully flashed about 10 roms while having gb boot loader they include 2-3 version of cm7, two version of miui rom , and many more gb boot loader can run any older or newer rom on captivate no need to downgrade bootloader
I'm a quick learner. I just switched over from a Sony X10 that was running a MIUI rom. My wife bought an iPhone so I took over her phone. I'm still learning the ins and outs of the captivate and how it works. I'm loving this phone. It's capable of so much more than the X10. I'm also loving this ICSSGS rom. It's smooth as butter.
Sent from my SGH-I897 running ICSSGS on Glitch using XDA
imnew
how to change model name for market
to access not supported apps?
inside file build.prob i have changed name but not working