Hi all. I`m experiencing some difficulties with g-sensor. From time to time phone acts weird as if it rotates, changes position from portrait to landscape just lying on a table without being even touched. I don`t know what`s the problem, whether it`s hardware or software. Help me please. sry 4 my english)
immo033 said:
Hi all. I`m experiencing some difficulties with g-sensor. From time to time phone acts weird as if it rotates, changes position from portrait to landscape just lying on a table without being even touched. I don`t know what`s the problem, whether it`s hardware or software. Help me please. sry 4 my english)
Click to expand...
Click to collapse
Try holding the phone level in your hand, screen up, then move it in a figure 8 motion. This worked on previous phones and should hopefully help this one as well.
Try on many Roms. now on ISC and problem still appears. i'm ready to disable g-sensor. problem is really annoying. i'll make video with this "bug" shortly.
I had some issues with mine as well. I can't say it rotated on its on sitting on a table, but certainly when in my hand when it shouldn't. I wound up using Beautiful Widget's rotate sensor to rotation off. The advantage of the widget is that you can quickly turn it on if you want it.
Even with the rotation turned off with the widget, rotation still occurs when you open the keyboard, which for me, is perfect!
Thanks for the tips! I have used both methods. seems the problem is go away.
Related
Hello guys,
I don't post many threads with problems, but for this one i can't find any answer and this one seems really weird, cause it occurs ONLY on any version of 6.1.
So I have really bizzare screen alignment problem.
Sometimes when i tap screen with finger or stylus - it will tap not in the point where i want but about 4-7mm under the point. It never goes above the point - always under it. Sometimes it occurs time to time, but sometimes without stop. I don't know what's wrong.
I've tried different SPL's and Radios. I've done really really really many configurations with ROM+SPL+RADIO and nothing seems to resolve that problem.
This only occurs on 6.1 for me(every one). NEVER HAPPENED ON 6.0 ROM. Any.
Anyone have any suggestions? Is this a hardware problem? If so why i don't occurs in 6.0? If its software related, how to get rid of this?
Thanks,
Chris
kristoff_sz said:
Hello guys,
I don't post many threads with problems, but for this one i can't find any answer and this one seems really weird, cause it occurs ONLY on any version of 6.1.
So I have really bizzare screen alignment problem.
Sometimes when i tap screen with finger or stylus - it will tap not in the point where i want but about 4-7mm under the point. It never goes above the point - always under it. Sometimes it occurs time to time, but sometimes without stop. I don't know what's wrong.
I've tried different SPL's and Radios. I've done really really really many configurations with ROM+SPL+RADIO and nothing seems to resolve that problem.
This only occurs on 6.1 for me(every one). NEVER HAPPENED ON 6.0 ROM. Any.
Anyone have any suggestions? Is this a hardware problem? If so why i don't occurs in 6.0? If its software related, how to get rid of this?
Thanks,
Chris
Click to expand...
Click to collapse
try playing around with the touchflo sensitivity settings either through the registry or use Kaisertweak for it...let me knw if it helps...
prabh said:
try playing around with the touchflo sensitivity settings either through the registry or use Kaisertweak for it...let me knw if it helps...
Click to expand...
Click to collapse
I've done it already. I've played with every setting known by me.
Still doesnt work. I just flashed to 6.0. And again - there is no such issue.
Thanks for suggestion!
woot I'm no longer the only one with this! i set my sensitivity settings to Normal on kaiser tweak it's the best at reducing the frequency i can get it so far haven't found a 'fix' kinda given up only hope if t-mobile uk release their damn 6.1 rom so i can try and see if i can get the phone fixed or replaced via warranty. also it seems the problem is with the device not the roms im currently on the t-mobile 6.0 its has the same problem more noticeable when i set sensitivity > normal in kaiser tweak.
EDIT: something I've noticed is that maybe the sensitive part has moved away from the screen right now when at an angle i can see a 'large effect zone' like holding it towards the PC screen the tapping with a stylus and seeing the distortion of the reflection i would estimate it to be about 2 cm in radius from the point i touch the screen (maybe this is normal, people who don't have this problem see it you can see this) but I've seen it worse especially after taking it out of my pocket at the end of the day so i think heat my have damaged touch part causing it to expand and detach that would be body heat or heat from when the devices sometimes overheats when plugged in, anyway thats the only theory i can come up with
Infuruno said:
woot I'm no longer the only one with this! i set my sensitivity settings to Normal on kaiser tweak it's the best at reducing the frequency i can get it so far haven't found a 'fix' kinda given up only hope if t-mobile uk release their damn 6.1 rom so i can try and see if i can get the phone fixed or replaced via warranty. also it seems the problem is with the device not the roms im currently on the t-mobile 6.0 its has the same problem more noticeable when i set sensitivity > normal in kaiser tweak.
EDIT: something I've noticed is that maybe the sensitive part has moved away from the screen right now when at an angle i can see a 'large effect zone' like holding it towards the PC screen the tapping with a stylus and seeing the distortion of the reflection i would estimate it to be about 2 cm in radius from the point i touch the screen (maybe this is normal, people who don't have this problem see it you can see this) but I've seen it worse especially after taking it out of my pocket at the end of the day so i think heat my have damaged touch part causing it to expand and detach that would be body heat or heat from when the devices sometimes overheats when plugged in, anyway thats the only theory i can come up with
Click to expand...
Click to collapse
Thanks Infuruno for your suggestion. I think you have a good point in that disortion but there is one big difference in our problem, and I don't know why.
Its the WM version. Now I'm runnig 6.0 without any problem. Even if I want to do this - it never occurs. And I mean never!. I don't know what's wrong here
Anyway I'll soon try to buy the touch screen for Kaiser and change it.
Cheers,
Chris
6.0 seemed to have sensitivity set on normal by default while the 6.1 by default the sensitivity is set of high (> normal) at least looking at the official t-mobile 6.0 and every other 6.1 rom i've tested, and the touch screen thing is just a theory i came up while well literally as i posted that message just started putting things i've seen together maybe if someone who didn't have the problem could see if they got distortion before you buy a new touch screen.
I just got my Tilt (I came from the Sprint Touch) and I've noticed the same thing. I never used a 6.0 ROM, the guy I bought it from already had a 6.1 ROM on it and I flashed it to HyperDragon's PRO III ROM when I got it.
I was used to my Sprint Touch and it had a 6.1 ROM on it as well and didn't have a problem. It is very annoying if I try to use an onscreen keyboard for those times that I don't want to pull out the other one.
Done more tests.
Today I've installed new HyperDragon III Pro (great ROM ) and I still got that issue. After that - flashed Dutty's V4 RTM (6.0) - and you know what? It works just perfect.
I don't know wtf is wrong with that.
What happens when you set the screen sensitivity to normal using kaiser tweak on a 6.1 rom?
Infuruno said:
What happens when you set the screen sensitivity to normal using kaiser tweak on a 6.1 rom?
Click to expand...
Click to collapse
Hmm, nothing at all.
I've tried that every time. That doesn't work on that
Thanks!
This just sucks ass.... I really don't know what to do. I just flashed HD III Pro, Its great ROM, and I cannot use it cause of this ****ing screen thing.
Flashed back to random 6.0 --- no problems. Damnit!
Same problem for me, very hard to make a call
Changing the sensitivity seems to have helped it some for me. I still notice it but its not as bad as it was before.
In KaiserTweak I have Sensitivity and Finger Pressure both set to Normal.
mindfrost82 said:
Changing the sensitivity seems to have helped it some for me. I still notice it but its not as bad as it was before.
In KaiserTweak I have Sensitivity and Finger Pressure both set to Normal.
Click to expand...
Click to collapse
I've done really many tries with various options and various configurations before I posted the thread. Nothing - absolutely nothing seems to help.
kristoff_sz said:
Hello guys,
I don't post many threads with problems, but for this one i can't find any answer and this one seems really weird, cause it occurs ONLY on any version of 6.1.
So I have really bizzare screen alignment problem.
Sometimes when i tap screen with finger or stylus - it will tap not in the point where i want but about 4-7mm under the point. It never goes above the point - always under it. Sometimes it occurs time to time, but sometimes without stop. I don't know what's wrong.
I've tried different SPL's and Radios. I've done really really really many configurations with ROM+SPL+RADIO and nothing seems to resolve that problem.
This only occurs on 6.1 for me(every one). NEVER HAPPENED ON 6.0 ROM. Any.
Anyone have any suggestions? Is this a hardware problem? If so why i don't occurs in 6.0? If its software related, how to get rid of this?
Thanks,
Chris
Click to expand...
Click to collapse
I have the very same problem. I thought my phone was broken.
zsilak said:
I have the very same problem. I thought my phone was broken.
Click to expand...
Click to collapse
I wonder then where is the problem? Maybe its a problem with some models of Kaiser?
I'm surprised there's not more people with this problem. Are you guys using an AT&T branded Tilt or HTC-branded, or other?
There's gotta be something in common with all of us.
What Hard-SPL version are you guys using that have the problem?
i have same problem
someday i flashed a new rom and i cant manage how to resolve this. i have that even on wm 6.0 roms. im setting up the sensitivity and it helps just locally, not fully at all. tried high sensitive on my friends kaiser and there is nothing worng with that.
i have tried many spls, but none of them seems to work
can anyone help with that?
i dont want to change my screen
ive tried many systems and spsl before, but never noticed this action.
please, somebody help with that.
I have an old Palm Tugsten T3 that started doing that, the way I fixed it was I went to the screen alignment page and clicked near the top of the bulls eye insted of the center of it, fixed it right up. try that and let me know how that works.
The gsensor on my g1 has all of the sudden gone whack in all programs from papi jump to maps to bubble they are all reading weird readings all of the sudden help please how do i fix this problem
liljumpman said:
The gsensor on my g1 has all of the sudden gone whack in all programs from papi jump to maps to bubble they are all reading weird readings all of the sudden help please how do i fix this problem
Click to expand...
Click to collapse
This is a great question as I ran into the same exact problem. My issue started after I downloaded the "de Blob" game which allows you to "calibrate" the sensor based on the orientation of how you want to hold the phone during accelerometer based play. After doing so my auto rotate would turn at awkward times and I found that other games didn't respond appropriately. I tried going back and "re-calibrating" by laying the phone flat but that didn't work. What ended up working for me (as I could not find for the LIFE of me where the "calibrate" feature was in the settings) the "Bubble" app which is basically a level app that tells you if a surface is level. Once I calibrated in the Bubble app, I no longer had the issue. Needles to say I no longer use the accelerometer to play "de Blob" and have emailed him to let him know of the issue. (I haven't gotten a response) Hope this helps. I will be looking forward to other ideas on how to re-calbrate the sensor in case this happens again. I'm sure there is a easier way.
yea i tried the bubble app out and now my gsensor is not working at all no matter what direction i put it in the gsensor does not respond
Really? Sorry man. Worked for me. You may need to start from scratch by wiping your phone and reflashing your ROM
The same problem
Hi are you have some solution. My G-sensor didn't respond too.
liljumpman said:
yea i tried the bubble app out and now my gsensor is not working at all no matter what direction i put it in the gsensor does not respond
Click to expand...
Click to collapse
They recommend you to mahe "8" signs with your phone in hand (twist it in all direction) because the sensor recalibrates that way. This is othe official advice.
Calibrating with the bubble app should work too. If not - alt+w
I have got the G-Sensor.
From Recovery
backup
Alt+W - delete all
and update to CM last stable
No joke, try shaking your g1 around kind of hard, it might be stuck. Reset it again after that and see what happens, worth a shot.
may sound daft, but have you tried this solution?
http://forum.xda-developers.com/showthread.php?p=4424396&#post4424396
it is a quick fix for auto rotate issues, not a permanent solution, but it may help as auto rotate is accellerometer based, as are all the apps you're trying to use
if it works, thanks go to MikeTaylor00, not me, i'm merely a messenger
senaia said:
may sound daft, but have you tried this solution?
http://forum.xda-developers.com/showthread.php?p=4424396&#post4424396
it is a quick fix for auto rotate issues, not a permanent solution, but it may help as auto rotate is accellerometer based, as are all the apps you're trying to use
if it works, thanks go to MikeTaylor00, not me, i'm merely a messenger
Click to expand...
Click to collapse
hey senaia, is this a proven method? Thanks =)
Is there any programme to for screen calibration? So part of the screen seems not responsive.
That is a hardware issue not a Calabration issue..
does somebody know if this "hardware issue" is present at all note's?
i found that my screen is a bit unresponsive at the top right corner. i cant draw about 2mm to the border of the screen (with the pen)!
lolcat12 said:
That is a hardware issue not a Calabration issue..
Click to expand...
Click to collapse
However when I flash a new rom the screen get responsive for a short while. After that I need to press the screen harder. On the bottom right hand corner has this problem.
helmetbox said:
However when I flash a new rom the screen get responsive for a short while. After that I need to press the screen harder. On the bottom right hand corner has this problem.
Click to expand...
Click to collapse
Did you ever solve this problem? Mine started doing it after it updated KL7 OTA.
Well guys I'd like for someone to chime in on this. I thought for sure this was a hardware issue. I'm on my second note now. My first note seemed like it was having issues with the lower right corner of the touch screen. I thought maybe it was a rom issue. I flashed clean KL7 and it seemed to suddenly be better then after a little bit it got worse. I have my second note and I flashed KL7 right away on it. Now after a little bit it seems to be getting less responsive, still better than my first, but I'm beginning to think this is a software issue. Any of you having these issues what Rom are you on? Should I try changing out this note for a third and see what happens? I may flash to some other firmwares to see too.
my top right is a bit unresponsive as well. . it works but seems a bit off. .
I used swipepad , really useful taskswitcher
It does not work when phone is connected any charger.
I've definitely noticed the phone being less responsive when on the charger, but this seems to lose responsiveness over time off charger and on battery.
I've had other phones that from time to time would act a little wonky when using them while charging.
Hey,
I've had some display problems, both with regards to calibration and also when it's charging.
I have made this video to demonstrate a problem I have of calibration. Watch how the display detects a signal at a point offset from where I press with the pen.
For me the problem I saw using the *#*#2664#*#* test is that the last 10 pixels or so on the 2 end sides of the screen don't respond.
For the pen offset is cause of the left or right handed settings, I find that holding the pen and rotating it so that my thumb presses the button of the pen instead of the indicator finger gives pretty good accurate results.
I'm definitely thinking this is at least more software related than hardware. I don't remember noticing any problems when on KJ1 or KK1. So I flashed back to KK1. It started it up and then I did a quick factory reset. This is completely stock/unrooted. Anyway bottom right corner seems to be having no problems detecting my touch now. I'll leave it on this for a few days and play around and see if it seems to lose sensitivity again. If it does I'll let you guys know, but for this to be a hardware problem I can't imagine it being this intermittent. Any of you on KL7 that mentioned this issue, are you guys completely stock KL7 or using the CF-Root Kernel? I know someone mentioned losing functionality in music player and torch and it seemed to be an issue with an alternate kernel.
trumpetboy101 said:
Hey,
I've had some display problems, both with regards to calibration and also when it's charging.
I have made this video to demonstrate a problem I have of calibration. Watch how the display detects a signal at a point offset from where I press with the pen.
Click to expand...
Click to collapse
That´s normal - pen is calibrated to use it at a certain angle - try to change the setup from right handed to left handed and you will see a different offset if you make the same test again.
The offset should be the same on each area. Only if this is not the case i would say, there is an issue with the screen.
Hey, ok so it is a deliberate software decision. Kinda sucks- I'd think I'd sooner like to have it type directly below where I write. I'm guessing it is an attempt to account for the fact that the glass has a finite thickness. Sooooo does anybody fancy writing a kernel alteration for this...?
i also find it more annoying than useful
Couple days on KK1 and what I thought was a hardware problem still seems to be fine. It's detecting much better in the bottom right corner where I was having issues on KL7.
I am having the same issue with the reduced responsiveness of the bottom right corner. I've noticed it after updating to KL7. Maybe is the driver of the screen.
Is there any way we could report this back to Samsung?
Sent from my GT-N7000 using XDA App
Hello.
I have the same problem ate bottom right side of the screen. I am ate LA4.
what should I do?
Although the problem was nearly imperceptible some days ago, while the note was connected to the charger, I've noted a very small area near the bottom right side of the screen where it was difficult to write using the stylus with SMemo. On the opposite side the loudspeaker is present; and so I've thought it might be correlated with the magnetic field of the loudspeaker. Today I've performed the *#*#2664#*#* test with and withouth the charger, but the problem is not occurred. Because of these devices are always more complex I prefer snap closures for my cases.
Hi to everyone,
First of all, i have to apologyze for my english, and just in case if there is another thread about this, but i haven't been able to fnd a solution or anyone with a similar problem.
I have a problem with the g-sensor of my OB, but i think it's a sw issue, as i can calibrate it with apps like gps settings (or something like that) putting the phone on a flat surface, and then i can see that it behaves normally IN THE APP. But then i go to the gallery and it automatically rotates to landscape mode, no matter how i put the phone. It detects that it is always sideways.
So i would like to know it f there is a way of calibrating the system accelerometer (not using 3rd party apps, which works for the app) and fix this problem.
Note: I have tried stock rom 2.2, 2.3 and cyanogenmod and the result is the same, so i have to disable screen rotation at least for reading properly the menus.
Any help would be appreciated.
Thank you in advance.
I have this weird brightness problem where I have it at 50% and it would randomly dim and brighten like crazy. I tested at 100% brightness and it also dims and brightens. Obviously, I don't have it on auto brightness but it sure acts like it.
Anyone with the same issue? Is it a defect? I just got the phone today and I'm afraid to exchange it to have the same problem again. I really like this phone. There's always a friggin issue on a new phone. It's ridiculous.
neotoky said:
I have this weird brightness problem where I have it at 50% and it would randomly dim and brighten like crazy. I tested at 100% brightness and it also dims and brightens. Obviously, I don't have it on auto brightness but it sure acts like it.
Anyone with the same issue? Is it a defect? I just got the phone today and I'm afraid to exchange it to have the same problem again. I really like this phone. There's always a friggin issue on a new phone. It's ridiculous.
Click to expand...
Click to collapse
I think is a software problem. Lollipop still have lot to fix. Mines look the same. Can be a display minor isue. Not sure, but for me this phone doesn't have the best brighness at all. But I love this phone better than others for now. If you came from samsung phone, there is a big diferent in brightness. Post some screen shoot. One in a white background, and the other in a grey one. I will post the same and you tell me if something is diferent. Sorry for my grammar. Is not the best !!!!?
---------- Post added at 09:22 AM ---------- Previous post was at 09:20 AM ----------
jfernandezv said:
I think is a software problem. Lollipop still have lot to fix. Mines look the same. Can be a display minor isue. Not sure, but for me this phone doesn't have the best brighness at all. But I love this phone better than others for now. If you came from samsung phone, there is a big diferent in brightness. Post some screen shoot. One in a white background, and the other in a grey one. I will post the same and you tell me if something is diferent. Sorry for my grammar. Is not the best !!!!?
Click to expand...
Click to collapse
Do it at 50%....
neotoky said:
I have this weird brightness problem where I have it at 50% and it would randomly dim and brighten like crazy. I tested at 100% brightness and it also dims and brightens. Obviously, I don't have it on auto brightness but it sure acts like it.
Anyone with the same issue? Is it a defect? I just got the phone today and I'm afraid to exchange it to have the same problem again. I really like this phone. There's always a friggin issue on a new phone. It's ridiculous.
Click to expand...
Click to collapse
My screen shoot!!!
neotoky said:
I have this weird brightness problem where I have it at 50% and it would randomly dim and brighten like crazy. I tested at 100% brightness and it also dims and brightens. Obviously, I don't have it on auto brightness but it sure acts like it.
Anyone with the same issue? Is it a defect? I just got the phone today and I'm afraid to exchange it to have the same problem again. I really like this phone. There's always a friggin issue on a new phone. It's ridiculous.
Click to expand...
Click to collapse
In Q&A is a thred call DPI Change. Try that, but reed carfully. you'll need root for that.
I appreciate your input but I don't know how the things you mentioned would help me in my case. I would need to do a video in order to see the problem instead of screen shots. Dpi change will do nothing in this case as well. You may be confused with the issue I have.
Well I try my best. As I sed could be a software problem. DPI is a resolution thing, can help a little. Also you can link a video to see exactly what you talking about. The reson I ask for the screen shoot is becaus I can probably see a differences between your brightness and mines. Hope somebody can help you on that.