Database Develop

[Q] Reverse Tethering

Hi all
is there a way to do reverse tethering on Milestone for surf the web using a notebook internet connection???

I don't think is because notebooks use a wireless receiver, not broadcaster (although it is still gives and takes - up and down).

Depends on how your computer is connected to the internet and its OS. Usually its no problem to share its internet connection through wifi. On Windows its called ICS (internet connection sharing, google it); on linux its possible as well, how you do it depends on your distro.
For Ubuntu: http://bigbrovar.wordpress.com/2009/01/17/share-you-internet-wirelessly-on-ubuntu/
For Windows (this is for XP, but should work the same on vista/7): http://www.geekyblogger.com/2008/05/sharing-internet-connection-using-wifi.html
(Your computer should not be connected to the internet via wifi when sharing internet over wifi!)
Sharing your Computer's internet connection through USB to your Milestone is not possible AFAIK.

Forgot about ad-hoc networks, android don't support it from what I remember.
They can beam out a adhoc network, but it wont show if you try searching for one.

my purpose is to have internet on milestone connected via usb cable to netbook which is connected to the net via wifi...

TheSgrash said:
my purpose is to have internet on milestone connected via usb cable to netbook which is connected to the net via wifi...
Click to expand...
Click to collapse
milestone has built in wifi... but i think there was a usb tethering app but i dont remember. i THINK cm6 or cm7 or something. i dont remember tho

Not possible, unless you have dual NIC (one for the receiving, one for transmitting) or someone comes up with a way via USB, but right now (after some Google-ing) no one has.

DannyDroid said:
I don't think is because notebooks use a wireless receiver, not broadcaster (although it is still gives and takes - up and down).
Click to expand...
Click to collapse
think about it - every internet connection has to recieve AND send some data, so ofc every notebook can receive and broadcast wifi signal
OP: try connectify

TheSgrash said:
my purpose is to have internet on milestone connected via usb cable to netbook which is connected to the net via wifi...
Click to expand...
Click to collapse
It makes no sense.. if you are able to connect via wifi with you laptop you can connect via wifi with milestone too.. if you need proxy auth you can use some advanced browser such as miren o dolphin...

It's sending data back and forth yes but it's also got to pass out IPs and tables (i.e routing traffic) (which I'm sure there is a program that can do that).
I should have explained myself a little better.
Just a side note, wireless extenders?
I have a DD-WRT extender is my room which extends my wireless network to my room.
Main Router --- Wireless --- DD-WRT Extender --- Wireless --- HTPC / Netbook / Milestone
Any reason why it can't be;
Main Router --- Wireless --- Laptop Running Some Software --- Wireless --- Milestone
Only issue I can think of (ofc) the speed will be halfed.
All the laptop would have to so is sort and forward the packets?

DannyDroid said:
Any reason why it can't be;
Main Router --- Wireless --- Laptop Running Some Software --- Wireless --- Milestone
Only issue I can think of (ofc) the speed will be halfed.
All the laptop would have to so is sort and forward the packets?
Click to expand...
Click to collapse
I'm not an expert on WiFi, but I think regular wifi cards can't do that, as you can be connnected just to one other wifi point. If I could use two (or more) access points at the same time I think it would be already in use to achieve better speed/ coverage

Me nether.
It's just the thought of me being able to turn a router into a wireless extender through some third party software which makes me wonder if it is possible but like you said it goes against everything I've ever read about wireless networks and equipment.

On a different topic, I have managed to get USB Tethering to work on the custom ROM that I am using now.

DannyDroid said:
Forgot about ad-hoc networks, android don't support it from what I remember.
They can beam out a adhoc network, but it wont show if you try searching for one.
Click to expand...
Click to collapse
I have no problem connecting to an ad-hoc network with my Milestone running the latest FroyoMOD.
Some Routers support repeating (extending signal coverage). But AFAIK, as said above, you cant use your Laptop as a repeater since it can only handle 1 connection at a time. That means either connecting to hotspot or being the hotspot.

pippocannelunghe said:
It makes no sense.. if you are able to connect via wifi with you laptop you can connect via wifi with milestone too.. if you need proxy auth you can use some advanced browser such as miren o dolphin...
Click to expand...
Click to collapse
it has sense if i CAN'T connect to my university wifi network which use a wpa-enterprise connection... it works with all htc android phones and also on motorola defy but it doesnt' with milestones...

Maybe the phone (rom) doesn't support wpa enterprise encryption.
What is the most logical approach

if you're running windows 7, check out connectify, it does exactly what your looking for

[Q] Help needed in combination of WiFi.... Radio.... oxygen1mod & USB adapter

Guys and gals...
i've searched my query here in this forum but still couldn't find the exact solution.
Im pretty new to this entire "android" platform. just got my nexus one rooted and unlocked.
my only concern here is regarding "wifi Problem". I've got linksys Compact wirelss-G USB adapter (WUSB54GC).
Now I don't know how to access it just like a router.
Secondly, When i started using it with nexus one it connected without any flaw. But some days after It's not connecting with N1, having said that
I've also used this adapter with Ipad2 and sometimes the wifi doesn't connect to the ipad2 properly.
Now how I was connecting like I always delete the existing adhoc connection and create another one and then try to connect... after few tries it connects but after few days N1 says obtainig IP address... and in windows 7 the status says connected with "no network access"
I tried "WEP and other protocols" and also without any encyption as well but nothing is working here.
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.
Currently Im using Oxygenmod FINALE
Please help me whether it's my N1 or the adapter or should there be anything wrong with the Radio i've got v4.06. with oxygen1mod finale
Ask me anything If u feel.
And yeah BTW I didn't know that Android is an open source so u can call me a "Nwwwwweeeeebbbb"

I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.

bassmadrigal said:
I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.
Click to expand...
Click to collapse
Thanks... But let me update it that I've just updated to 5.12 radio... I was too curious that's y i played the bet. after update nothing seems to me different network signals are same i.e 100% blutooth working and havnt tried EDGE. WiFi still not working and stuck at "obtaining IP address"
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.

I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?

bassmadrigal said:
I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?
Click to expand...
Click to collapse
well it's the first time I've got this USB adapter so I only know of this adhoc connection being made in win 7. havnt experienced a router though.
but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)

Gablu said:
well it's the first time I've got this USB adapter so I but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)
Click to expand...
Click to collapse
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.

bassmadrigal said:
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.
Click to expand...
Click to collapse
I think I need to clear something here....
My ISP gave me a USB called (EVO), I just plug that "EVO" into my computer and I can download upto 3.1Mbps and browse and surf yada yada...
then I bought "linksys USB adapter" to make my internet connection WiFi.
Now how would I connect my N1 to internet via WiFi when u say "adhoc" is not supported.
Is there anything apart from what "Bassmadrigal" suggested.? (caz it sounds too technical for me)

I don't know if ADHOC is actually supported (and if it is, how well it is supported) on Android. But if you are having issues with devices other than your phone, then I think it is going to be a computer issue that probably won't be able to be fixed with any devices on your phone.
I can try to make it a bit more non-techincal...
Buy a cheap wireless router and use the router's guide to get a wireless network set up
Plug in the network cable from the computer's network card to the "internet" port on the router
Follow this guide to get Internet Connection Sharing up and running on your computer
???????
Profit

[Q] Ethernet adapter for p1000 ?

Is there a way to connect my p1000 to wired ethernet ?
At the moment i dont have a laptop, so sometimes when i can't get wireless in the area (or no wifi for whatever reason), but ethernet is available i cant use it...
Been reading that there are some sort of adapters that worked on some chinese tablets...
Any of that goodness for p1000 ?
Tab is on ICS (cm9 nightlies)...

Haven't seen such things, maybe you could buy a small pocket AP.

sliex said:
Is there a way to connect my p1000 to wired ethernet ?
At the moment i dont have a laptop, so sometimes when i can't get wireless in the area (or no wifi for whatever reason), but ethernet is available i cant use it...
Been reading that there are some sort of adapters that worked on some chinese tablets...
Any of that goodness for p1000 ?
Tab is on ICS (cm9 nightlies)...
Click to expand...
Click to collapse
i don't think so, probably, you should go for the small AP because it make more sense to me
Sent from my GT-P1000 using Tapatalk 2

possible to enable usb tethering on HP touchpad?

hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?

anyone?

dylansmith said:
hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?
Click to expand...
Click to collapse
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .

sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
unfortunately, my pc does not have a wifi card
any other solution?

dylansmith said:
unfortunately, my pc does not have a wifi card
any other solution?
Click to expand...
Click to collapse
What exactly is your setup is your desktop connected by Ethernet to a wireless router, how is the tablet connected.
what is that you are trying to achieve, the more info you can give the easier it will be for me to replicate and hopefully come up with an answer.
regards

my hp touchpad can connect via wifi, but it's a lot slower than a wired connection. i want to try achieving FULL/near full speed download on my hp touchpad, by reverse tethering to the desktop's ethernet connection.
the desktop is connected to the wireless router through a powerline adapter, i.e. wired ethernet and is achieving full speed on its own.

One thing to note is that you'll not notice too big of a speed boost if you are connecting to the internet. The reason being, your ISP has a throughput speed of say 25 MBits a sec down and 5 up (In a hypothetical situation). Your wireless is usually up to 54 (on wireless G), and wired is either 10/100/1000 MBits. However, you are still throttled by your ISP, who runs at 25. So tethering via USB won't net you faster speeds to Dropbox, but it might for local network related things, like streaming from a local PC, transferring files, RDP, etc.
Just a thought to share, hopefully it helps.
Oh, and running through the power line like that is a messy way to do it. Home power is noisy and slows down your network speeds. Just sayin', I hope I don't offend.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App

sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
I've always wanted to do that, thanks for telling about connectify
Sent from my cm_tenderloin using xda premium

bump
This is the thread that keeps coming up in google searches, and since it was never answered, figured its time for a bump.
I´m in a similar situation atm, Ive got no access to data or wifi as Im traveling abroad.
Cyber cafes abound, and id love to use this app as well, but.. i get the same error.
Im surprised as id assumed CM would have all such features builtin. No big that it doesnt, im just not sure how to add it.
Any help?
(and yes, ive tried to get the other method working, but having trouble getting adb to detect the tablet, that method works on my phone, but id prefer a method that fakes 3g, since that other method doesnt work with many apps)

The problem is the to connect anything to the TP USB connector and get it to work needs power injected into the interface (hence the need for Y cables when using an OTG cable). This ends up as so complicated, that most give up and decide to use WiFi tethering. Also, I am not sure anyone has found a way to get the necessary drivers into the kernel.

5G drops to 4G when I plug in external ethernet

Hi all,
I'm trying to use a Pixel 4A 5G in combinatin with a travel router to get fast internet on the move. I have it pluggged into my travel router via a USB cable and I get a maxxed out download rate of around 240Mbps but on the phone the speed test is showing > 400Mbps. Now 240 is suspicioulsy half the 480 Mbps that USB2 offers. Also on checking the logs on my router it looks like the device is connecting as USB2 so that all makes sense.
Now apparently the 4A 5G has a USB 3 port so I had a 1 Gbps ethernet dongle lying around. So I plugged that in and every time I plug in the device the 5G drops to 4G. When i unplug it again it goes back up to 5G. I rebooted and tried again and the same thing happened. I then tried a different USB cable and the 5G holds up until I try do something then it drops to 4G.
I also tried using the wifi sharing on the device itself and it maxxed out at 90 Mbps, unfortuntaely, so I'm assuming it doesn't support fast wifi, which is a shame.
Does anyone know whats going on here? And, more importantly, how I can stop this happening? If I could use the ethernet then I should be able to get the maximum throughput for this which would be awesome.
Any help much appreciated!

To make sure I'm clear on what you're asking, you're attempting to use your phone as a cellular modem to provide an Internet connection via Ethernet to the travel router, right?
I have no idea why it would drop to 4G. That's rather strange. Try a different Ethernet dongle maybe?

V0latyle said:
To make sure I'm clear on what you're asking, you're attempting to use your phone as a cellular modem to provide an Internet connection via Ethernet to the travel router, right?
Click to expand...
Click to collapse
Yup .. you've got it.
V0latyle said:
I have no idea why it would drop to 4G. That's rather strange. Try a different Ethernet dongle maybe?
Click to expand...
Click to collapse
I may try that .. will have to think about how I can get a debug spew and see whats happening in the log ...

Gozzeh said:
spew
Click to expand...
Click to collapse
Lol...SPEW...I'm a child

Gozzeh said:
Hi all,
I'm trying to use a Pixel 4A 5G in combinatin with a travel router to get fast internet on the move. I have it pluggged into my travel router via a USB cable and I get a maxxed out download rate of around 240Mbps but on the phone the speed test is showing > 400Mbps. Now 240 is suspicioulsy half the 480 Mbps that USB2 offers. Also on checking the logs on my router it looks like the device is connecting as USB2 so that all makes sense.
Now apparently the 4A 5G has a USB 3 port so I had a 1 Gbps ethernet dongle lying around. So I plugged that in and every time I plug in the device the 5G drops to 4G. When i unplug it again it goes back up to 5G. I rebooted and tried again and the same thing happened. I then tried a different USB cable and the 5G holds up until I try do something then it drops to 4G.
I also tried using the wifi sharing on the device itself and it maxxed out at 90 Mbps, unfortuntaely, so I'm assuming it doesn't support fast wifi, which is a shame.
Does anyone know whats going on here? And, more importantly, how I can stop this happening? If I could use the ethernet then I should be able to get the maximum throughput for this which would be awesome.
Any help much appreciated!
Click to expand...
Click to collapse
Does using data like this count towards hotspot or do you have it setup wit TTL and other mods?

I believe it counts towards hotspot but I have unlimited data over hotspot so don't care really ...