I am currently using temasek's KANG BUILD P204-63 and vadonka's lastest build, when i plug my O2x to my computer, i dont see anything come up as usual but only the charging signal, i cant access to my internal storage now. Also, when i open the storage settings, i only see 1.5GB in "internal storage". Can you please help why i cant connect to my computer.
Thanks in advance
Do you have USB debugging enabled?
Yes, i turned it on
Delete old lg drivers qnd download v3.6 from lg's site should fix the mass storage issue
Sent from my LG-P990
ShunSeb47 said:
Delete old lg drivers qnd download v3.6 from lg's site should fix the mass storage issue
Sent from my LG-P990
Click to expand...
Click to collapse
I tried, but still doesnt work
Change USB port yu using.
Download and install generic Android driver (Google).
Plug in phone in different port making sure debugging is on and enable USB storage when computer is searching for drivers
Sent from my Optimus 2X using xda premium
tzarp990 said:
Change USB port yu using.
Download and install generic Android driver (Google).
Plug in phone in different port making sure debugging is on and enable USB storage when computer is searching for drivers
Sent from my Optimus 2X using xda premium
Click to expand...
Click to collapse
I have done all of those thing, but the computer doesnt even search for the drivers
Did u try reboot the pc?
temasek said:
Did u try reboot the pc?
Click to expand...
Click to collapse
Yes, i did, i tried everyrom, and it still doesnt want to connect to the computer
Probeo said:
Yes, i did, i tried everyrom, and it still doesnt want to connect to the computer
Click to expand...
Click to collapse
2 suggestions
1. Uninstall your lg mobile drivers and reinstall latest driver, available in my mediafire folder if u don't have it.
Or
2. Try a stock cm kernel and try mounting again.
Wasnt you doing sokething with the volf.stab? Like changing internal as external card?
Sent from my LG-P990 using Tapatalk
Sent from my LG-P990 using Tapatalk
Probeo said:
I am currently using temasek's KANG BUILD P204-63 and vadonka's lastest build, when i plug my O2x to my computer, i dont see anything come up as usual but only the charging signal, i cant access to my internal storage now. Also, when i open the storage settings, i only see 1.5GB in "internal storage". Can you please help why i cant connect to my computer.
Thanks in advance
Click to expand...
Click to collapse
How does the system recognize the phone? Go to Device Manager (or something like that) and watch if there is a yellow mark upon a driver.
I had the same problem yesterday, I had to delete and reinstall drivers
Related
Hi all,
Just flashed CM9 on my Touchpad and am wondering if I'm missing a USB driver or something. When I was on WebOS I could connect the TP to my PC and select the option to turn on Mass Storage with no issues. After flashing when I connect the TP Win 7 tries to install a driver but fails to do so.
What am I missing? I can connect my Galaxy Nexus to the PC with no issues so I'm at a loss.
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Bingo. That was it.
Thanks guys!
(Isn't it odd that neither MTP or PTP is checked by default?)
Edit: Looks like I spoke too soon. When connected via PTP the computer recognizes the connection but for some reason won't let me copy/paste anything to the SD Card. When I try to connect via MTP the PC just says its a "USB composite device" so I can't access the volume. Grrrr.
Windows XP and MTP Problem
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Thanks for the help!!! Keep up the good work.
BAM! Worked like a charm!
I was getting a little frustrated. You guys are lifesavers.
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
desiretouchpad said:
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Click to expand...
Click to collapse
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
thanks guys. got the same problems with OP. now it solved. again, thanks to u 2.
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Wow Thank you so much guys!
wow, worked like a charm.
codehunter13 said:
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Click to expand...
Click to collapse
I agree. Even if you get the USB connection to work in CM9, there is a file size limitation on transfers. I don't recall exactly what the size is but I know I had trouble with a "nightly" image I was tryubf to install. Now I either use CWM or transfer via a wireless FTP app. "WiFi File Transfer" from the Play Store.
Wifi is a little slower but you don't have to bother connecting the cable and setting everything up. Once you set up WiFi FT the first time, it just takes a couple of clicks to connect and start a file transfer.
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
Click to expand...
Click to collapse
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
Click to expand...
Click to collapse
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
normalife said:
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
Click to expand...
Click to collapse
Yeah but all you have to do is go to your Device Manager and update the driver from there
Sent from my cm_tenderloin using Tapatalk 2
make sure you uncheck the usb debugging mode in the developer settings
worked for me like a charm
colin_zz said:
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Click to expand...
Click to collapse
Good job! Thanks.
I've having a problem with my PC not picking up my phone when plugged up. It will charge, but that's it. I don't get the drop down box to select my connection mode. Here's my setup:
Android version 2.3.4
Gingervolt 2.0
SW version: VS910ZV7
Debug enabled
Default connection mode is internet connection
Connected straight to USB port (no hub involved)
I've tried taking the battery out for a few minutes and that didn't work. I've tried toggling the default connection mode, but that does nothing.
I'd like to upgrade my CWM, but can't because of this.
Any ideas?
***EDIT***
Well for some odd/unknown reason my USB connection is working again! I have done nothing to my phone since flashing Break Out ROM 1.1 a while back and the USB was still broken after that. So, while this makes absolutely no sense at all, I'm thrilled to have it back!
Click to expand...
Click to collapse
brad6360 said:
I've having a problem with my PC not picking up my phone when plugged up. It will charge, but that's it. I don't get the drop down box to select my connection mode. Here's my setup:
Android version 2.3.4
Gingervolt 2.0
SW version: VS910ZV7
Debug enabled
Default connection mode is internet connection
Connected straight to USB port (no hub involved)
I've tried taking the battery out for a few minutes and that didn't work. I've tried toggling the default connection mode, but that does nothing.
I'd like to upgrade my CWM, but can't because of this.
Any ideas?
Click to expand...
Click to collapse
If you want drop down box to select connection mode then go to settings/connectivity and check always ask (if its not already checked) i dont think the computer will show its connected unless mass storage is selected and your sd cards show up on computer. When in internet mode its probably fine just run the program to install cwm recovery. Thats what i did to make sure computer was reading the phone. Someone else may have better input on the subject
Sent from my VS910 4G using xda premium
I've had problems before when not using the original LG cord. Are you using something other than that?
"always ask" is checked, but it never asks when I plug it up to my PC. If I switch default connection mode to mass storage my PC doesn't pick up my SD card either. So mass storage nor internet connection mode works. It will however, at least charge.
Yes, I'm using an original LG usb cable.
Have you verified the SD Card actually works by going into a File Manager and seeing if you can read the files in your SD Card?
Yes the SD card works. I can browse the files on it with Root Explorer and CWM picks up the backup images on it.
brad6360 said:
Yes the SD card works. I can browse the files on it with Root Explorer and CWM picks up the backup images on it.
Click to expand...
Click to collapse
Have you only tried 1 port on the PC or multiple? If you can, try a different port or a different PC.
Sent from my AXI0M ICS RAZR using tapatalk.
spc_hicks09 said:
Have you only tried 1 port on the PC or multiple? If you can, try a different port or a different PC.
Sent from my AXI0M ICS RAZR using tapatalk.
Click to expand...
Click to collapse
I should have included that in my original post. I have tried every USB port on 3 different PC's. Two HP's and one Dell.
Any other suggestions? I've been searching the net for days now and can't find a solution. I'm beginning to think I have a hardware problem. Is there any chance this could be a software/configuration problem?
trying for almost one week............but can't get the solution:crying:
my device cannot connect to usb.........while usb debugging is ON:crying:........
my pc shows [no device found].....but the drivers are installed....help me
right now i m using cm10(official)
os :win 7 sp1 64 bit
rv0000s said:
trying for almost one week............but can't get the solution:crying:
my device cannot connect to usb.........while usb debugging is ON:crying:........
my pc shows [no device found].....but the drivers are installed....help me
right now i m using cm10(official)
os :win 7 sp1 64 bit
Click to expand...
Click to collapse
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
thanks NOOBY0815.....
this method works like charm..............
what now I did is ...changed the USB connection type to camera(PTP) and then re-checked the usb debugging.....and then i thanked you.....
N00BY0815 said:
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
don't understand why you wrote "go to apps" - in my CM10 on my p970 the USB options are in storage menu :
settings->storage->[press menu]->USB computer connection
then after choosing Mass storage i can finally debug using ADB
sharp80 said:
don't understand why you wrote "go to apps" - in my CM10 on my p970 the USB options are in storage menu :
settings->storage->[press menu]->USB computer connection
then after choosing Mass storage i can finally debug using ADB
Click to expand...
Click to collapse
Sorry for mixing up ROMs... and btw this is not the only question i was answering that day... anyway you found your solution and my suggestion was partially right if you hadnt been lazy before, you had found out about it on your own, cause around 10 ppl already asked about it...
Sent from my LG-P970 using xda app-developers app
Turn off your phone and battery get out...wait for while. Put battery in, turn on your phone and try to connect via USB
My Nexus 6 wont connect with MTP...only PTP.
It shows on the connected media but it doesnt show up on My Computer.
It doesnt matter if i turn debug on or off, still doesnt show.
If i switch to PTP, it shows up but i cant add or edit the folder and it only
shows 'Pictures' and DCIM folders
Im trying to add zip files.
how do i fix the MTP problem?
collinjm01 said:
My Nexus 6 wont connect with MTP...only PTP.
It shows on the connected media but it doesnt show up on My Computer.
It doesnt matter if i turn debug on or off, still doesnt show.
If i switch to PTP, it shows up but i cant add or edit the folder and it only
shows 'Pictures' and DCIM folders
Im trying to add zip files.
how do i fix the MTP problem?
Click to expand...
Click to collapse
Do you have TWRP installed?
Evolution_Tech said:
Do you have TWRP installed?
Click to expand...
Click to collapse
Yes i have TWRP installed. Newest Version
collinjm01 said:
Yes i have TWRP installed. Newest Version
Click to expand...
Click to collapse
Boot into TWRP and connect to PC. See if you can mount MTP that way. Not a fix but could get your files transferred. Also may prove if more than a ROM issue.
I have the same issue? An it still is not coming up with TWRP? I tried the DEV M preview, it's good. But will not connect to PC as MTP?
Usb debugging off, selected mtp in dev options, reboot phone. works now?
I'm actually on stock rooted and unlocked, so idk what's up
Sent from my Nexus 6 using XDA Free mobile app
collinjm01 said:
I'm actually on stock rooted and unlocked, so idk what's up
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried a different cable? Different USB port?
I tried different ports but the phone will connect adb and ptp so I assumed it was the phone. When I connect using mtp, it makes the connection sound but nothing happens.
Sent from my Nexus 6 using XDA Free mobile app
Guys,
I do not see any folders other than DCIM on the PC.
I used the stock cable.
Anyone else facing this issue or is it supposed to be like this?
ayemprady said:
Guys,
I do not see any folders other than DCIM on the PC.
I used the stock cable.
Anyone else facing this issue or is it supposed to be like this?
Click to expand...
Click to collapse
Are you connected PTP or MTP, sounds like your connected in PTP transfer mode.
I have tried both. Does it work for you?
ayemprady said:
I have tried both. Does it work for you?
Click to expand...
Click to collapse
Mtp works if driver is installed right check device manager while in mtp mode, if you dont see R1 HD under portable devices, chances are driver not set up, try this
In device manager u will see the driver (probably under portable devices) anyhow it will have an exclamation mark on the device, just double click it to bring up properties windows, click the driver tab, then update driver, choose browse my computer for driver software, then click let me pick from a list.... It should come up with several driver choices, select MTP USB Device, that should do the trick, under device manager you should now see R1 HD in device manager, and the device will now show up in explorer.
ayemprady said:
Guys,
I do not see any folders other than DCIM on the PC.
I used the stock cable.
Anyone else facing this issue or is it supposed to be like this?
Click to expand...
Click to collapse
What version of Windows are you using?
Sent from my Lenovo A7010a48 using XDA Labs
What drivers are used for mtp?
Sent from my R1 HD using Tapatalk