[Q] i9001 stuck in bootloop after updating - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello guys, I've updated my SG+ to the latest firmware (XXKQ1) using ODIN over my old firmware (I didn't want to lose any settings/apps, sorry noob). My phone just started giving me forced app ending errors and now it's stuck in the bootloop (animation).
Any sugestion would be helpful! I would love a solution that would not require a total wipe of my settings/pics/etc.

try to get in download mode again by pressing volume button down, home button and power button. Open Odin select the firmware you downloaded as onepackage file and flash again but i think your pics and stuff like that will be gone.

Usually it should boot normally after a flash, without resetting anyway. But it helps in 90% to reset your device, maybe it doesn't boot up because you didn't resetted it. So im sorry to say that but I think you have to do that, or flash the firmware you had before..
For resetting you can go into the recovery mode (by pressing vol+ and power button, then when the "android out of the box" appears release these buttons and press the menu softbutton), then choose wipe data/factory reset or something like this. ^^

This doesn't seems to be solved.
I have the same problem, I did factory reset, formatted /system, wipe cache, dalvik, after updating I fixed permissions, but the phone is still on bootloop.
I did: RemICS 1.3 and CyanogenMod 9 with CWM 5.5.0.4. Always bootloop.
http://forum.xda-developers.com/showthread.php?t=1735976
Any help?
The only ROM that is working is the original one from samfirmware.com.

I'm sorry for post under the post, but I wanted to go this topic to the top, so anybody with this issue would see it.
I have tested one solution and it help with me:
Before uploading CWM into the Phone, format external sdcard. After that upload on external sdcard the zip archive with ROM and upload CWM with Odin.
After going to recovery mode and installing the ROM (I uploaded RemICS 1.3a), everything work just fine.

bootloop
Check this out ....androidtuition.com/fix-boot-into-recovery-problem-after-flashing-twrp-galaxy-s-plus-i9001
i was able to fix the cwm bootloop issue using ODIN and the boot tar file from the link above.

sridhar2malladi said:
Check this out ....androidtuition.com/fix-boot-into-recovery-problem-after-flashing-twrp-galaxy-s-plus-i9001
i was able to fix the cwm bootloop issue using ODIN and the boot tar file from the link above.
Click to expand...
Click to collapse
I still have the same problem after flashing the boot_loader.tar using ODIN

Related

[Q] Galaxy S not starting after boot animation

I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
themate1987 said:
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
At present condition, I have no CWM. I have only recovery 3e. Is it possible to flash CVM rhrough Odin?
If you can flash voodoo kernel, that has CMW inbuilt? Then try and figure it out from there?
I solved the problem by doing the following steps:
1. followed this link http://forum.xda-developers.com/showthread.php?t=807784 and flashed XWJM8 whatever that may mean.
2. Voila after flashing the above with odin my phone restarted with familiar UI.
3. Suddenly I noticed that my phone does not have an IMEI and my sim card not detected. I was tempted to copy my backed up EFS folder and I resisted the temptation. Instead I copied the CWM and Doc's rom which I was using prevously to the External SD and afterwards copied the same to Internal SD.
4. I started my phone in recovery mode and i could see that still the error message was there. But I flashed CWM and again flashed Doc's Rom. After the phone restarted, I found that my sim was detected and everything was back to normal. OMG what a relief it was.
5. Thanks to XDA and it's members for helping me.
if u have root acess (and i hope yes)
u have to restore system, turn off and than turn on pressing home and volume up, 3 bottons in same time, than with volume keys and home choose BACKUP AND RESTORE, than ADVANCED RESTORE and than SYSTEM, if u have maked a backup u have to chose that backup or one of them if u have more. let him restore and choose REBOOT PHONE. now u have phone again.
if u need some help email me [email protected]
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
seking said:
I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
Click to expand...
Click to collapse
Borrowing the tread. I was using CM9 and installed NStools and after a while my phone rebooted and started then froze at my homescreen. I went in to recovery and did a factory reset and the phone worked again. So I tried installing NStools again and got bootloops so I did a factory reset again but now I get bootloops and I can't go in to recoverymode.
My question is can I just flash EZbase 4.0 (Gingerbread) and then flash CM9 directly from it?
Thanks.

Kernel flash failed

I've gone ahead and rooted my Note, and that went fine.
Then I decided a ICS rom would be nice, so I needed the Chainfire ICS repack.
I've downloaded it, placed it on the SD-card.
Rebooted into recovery, but it can't see .tar files it would seem.
Tried the option "flash kernel" through CWM and after a while it states that no zimage was found. I've checked the size of the file, and it's 790MB as it should be.
Perhaps anyone can pinpoint what I've missed?
Use mobile Odin. you cant flash tar file in CWM. Boot in GingerBread install Mobile Odin. Update. then Select Open file Browse your file then Flash firmware.
Thanks!
That solved it.
But, um...
Now it seems to be in a bootloop.
I see the Samsung splash screen, followed by Odin quickly stating that it flashes Kernel, System, Data, Hidden and Cache and ending with "Done", and then back to the Samsung boot screen and it repeats the process...
crazyrobban said:
Thanks!
That solved it.
But, um...
Now it seems to be in a bootloop.
I see the Samsung splash screen, followed by Odin quickly stating that it flashes Kernel, System, Data, Hidden and Cache and ending with "Done", and then back to the Samsung boot screen and it repeats the process...
Click to expand...
Click to collapse
Try wiping cache and dalvik and factory reset from Recovery.
You will lose all your apps and some data. And it might brick your phone,
But that's what I'd do.
If that doesn't help, but you still have CWM, get a rom on your sdcard, in zip format, and flash it - even Gingerbread.
If that doesn't work, Download Mode + stock gb rom.
I got the same probleme, thanks for question and answer.. very useful
crazyrobban said:
Thanks!
That solved it.
But, um...
Now it seems to be in a bootloop.
I see the Samsung splash screen, followed by Odin quickly stating that it flashes Kernel, System, Data, Hidden and Cache and ending with "Done", and then back to the Samsung boot screen and it repeats the process...
Click to expand...
Click to collapse
I has a similar problem had to redo the entire process using odin pc to get it to work.
I tried going through this guide from start to finish now, but it's the same issue.
(Step 3 to 5 is the only way to get out of the bootloop btw.)
Just keeps bootlooping. *sigh*
Guess I'll wait for the official ICS instead.
I suddenly miss my old HTC Sensation.
crazyrobban said:
I tried going through this guide from start to finish now, but it's the same issue.
(Step 3 to 5 is the only way to get out of the bootloop btw.)
Just keeps bootlooping. *sigh*
Guess I'll wait for the official ICS instead.
I suddenly miss my old HTC Sensation.
Click to expand...
Click to collapse
I ll guide you step by step procedure from beginning.
1. Flash Rootable GB ROM (KL3)Download from here
2. Root GB From here
3. Install mobile Odin from Market and update
4. Copy ICS - Repack Chainfire to ext Sd card
5. Open Mobile Odin and select Open file and browse "ICS Repack"
6. it ll shown info on that ROM say "ok" couple of times
7. Then scroll down and select flash firmware (Now it reboot and flash new ICS Repack
8. After flashing it ll boot into CWM recovery. Just select Reboot now
9. Wait for complete boot
Done... If it doesn't boot. Get into recovery and do "Wipe /Factory Reset" and "Wipe Cache" .. Then reboot
(First boot ll take little long time, 5-10 Mins)
Alright it works now.
For anyone that has the same issue.
Flash a custom GB rom (like for instance CheckRom) and THEN run mobile Odin and the ICS repack. That worked for me.
So now I'm on a 4.0.3 ROM and it feels awesome!
Thanks for the help!

[solved] Soft brick, tablet resets during recovery activities

I have the wifi only 7310 model of the 8.9
Overcme CwM Recovery 5.1.2.6
ROM was Galaxian Soup AOSP 1.6
My tablet resets during recovery. Half through a data wipe ROM install ROM backup or ROM restore it will reset and reboot.
It first happened when i booted into recovery and triedROM issue. to make a back up of m y current ROM and attempt to flash the aokp one. It reset during the backup process.
It shouldn't be a ROM issue. My tablet did this once before, it would reset when i did anything involvng dataon an Overcome ROM i think. Data wipe/backup etc. I left it alone while the ROM still worked and tried again a week later with no issues.
Any ideas? Now i have a soft brick that cant boot past the Samsung Screen. I can get into recovery and download modes.
EDIT* added a video
EDIT2:
The issue was solved.
What ended up happening what i attempted to flash back to stock software, ODIN would stall during the system.img. From this point i thought it was done, but i could still get into the stock recovery, i used the stock recovery to wipe the data after several failed attempts in a similar manner to this video.
One day it just worked. I could finally wipe data and cache without a reset. But i could't flash a file because ODIN would still freeze on the system.img. It was suwandiapr who showed me his walkthrough to push an file to recovery from adb. Thank you so much
I do NOT know why it my tablet/recovery starting resetting when i wanted to do a data/cache wipe/restore or why it decided to start doing it again. I tried the 5.5 cwm, the overcome 5.1 and the stock and none of them worked. Today i tried it on an off chance of boredom and it started working again. It is a confusing situation but that is what happened.
Again that you so much to Mr.Home and especially suwandiapr for all your help
> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time
MrHome said:
> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time
Click to expand...
Click to collapse
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?
bdfull3r said:
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?
Click to expand...
Click to collapse
Download Odin 1.85
Install Samsung USB drivers (should come with Kies)
Download stock firmware from samfirmware
Check the box beside PDA
Put the .md5 file into the PDA slot
Leave all other options on defaults
Put tablet into Download Mode (power and vol -, select the one that isn't recovery)
Connect it to your PC
Press START in Odin
Wait ~10 minutes
NOTE: this shouldn't wipe the internal sdcard. if you need to wipe that, select repartition and give Odin a PIT FOR THE P7310/7300 MAKE SURE IT'S THE RIGHT ONE OR YOU WILL BRICK BADLY.
Moved To General​
I understand this might be a development related question, but questions do not belong here.​
im still bricked so if ANYONE has any ideas please let me know.
Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..
suwandiapr said:
Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..
Click to expand...
Click to collapse
I've tried switching recoveries, the device still resets like in the video posted above
bdfull3r said:
I've tried switching recoveries, the device still resets like in the video posted above
Click to expand...
Click to collapse
I never try it before.. how about stock recovery? It will wipe your data partition include SD card..But it worth to try if you dont like ODIN..
here is the zip version..Instal from recovery..
Edit: Do with your own risk..
After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.
MrHome said:
After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.
Click to expand...
Click to collapse
But how do i fix it?
bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.
nirogu325 said:
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.
Click to expand...
Click to collapse
Its not the recovery, i have changed recoveries two or three times now through ODIN and they all perform the same way
bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Well, i just don't wipe cache. Only the dalvikcache and all went well..
I have a soft brick, no memory or sd card data. I can get into recovery but i don't have any files on the tablet to flash.
Are you windows user? if yes..
Just like my answer from previous post.. See page one!
Mount your /system and /data partition from recovery menu..(from cwm)
From your computer.. Use this tools for pushing the file flashable.zip to device..
After that you can flash a new rom from recovery..
http://forum.xda-developers.com/showthread.php?t=1539352
Thank you so much sir. I worked and I no longer have a brick
bdfull3r said:
Thank you so much sir. I worked and I no longer have a brick
Click to expand...
Click to collapse
Glad to hear that..
Add your thread subject with [solve] for closing the thread..

[Q] Can anybody flash my phone SGS I9000?

Hi,
I am using SGS I9000 for past 1.5yrs.
I am on stock ROM, i tried to flash once but phone always starts into bootloop. Need to sent it to Service Center by lieing that it wont boot up.
I also heard losing IMEI is common while flashing any ROM.
Now I am very scared to flash any custom rom, i have just only rooted my phone.
But my phone is giving a lot of problem, hanging a lot, Force Closes etc..!!
I can pay few amount if my phone is successfully flashed with CM10 ROM.
My location is New Delhi/NCR - India.
Please let me know if anybody is interested here to help me out.
Thanks
Haris
Please check if you're cf-rooted.
If you are, go this website : http://get.cm/?device=galaxysmtd and download the latest cm9 nightly .zip file.
Off your phone, Go into recovery mode, Wipe cache , factory reset and select the cm9 file from your sd card and install it.
YOU ARE DONE
heyyimnew said:
Please check if you're cf-rooted.
Go into recovery mode, Wipe cache , factory reset and select the cm9 file from your sd card and install it.
YOU ARE DONE
Click to expand...
Click to collapse
How to check i m cf-rooted?
How to go into recovery mode ?
& What are these wipe cache n factory reset.
I have earlier used ROM manager to do all the setup after that it went into boot loop.
Hey
U can enter into recovery by pressing volume up+home+power buttons...continuously....
Cheers
If my post helped, dont forget to hit the thanks button..

[Q] Help Needed Phone stuck on N7000 screen

Phone won't boot past Galaxy Note Boot image
Phone will go in download mode by pressing Vol-Home Power buttons
Phone will go in recovery menu by pressing Vol+Home Power buttons but if i try to flash anything it shows verification error.
Anything flashed with Odin, goes successfully without any errors, but phone still won't boot past Galaxy Note boot image. When connected to PC in Odin mode USB recognised, when connected to PC with Galaxy Note boot image, USB not recognised (malfunctioning error appears)
I tried flashing ics/gb stock roms, kernels, pit files, and nothing helps
Please help
lastly
HAVE FLASHED N7000DDLC1_N7000ODDLC1_N7000DDLC1_HOME.tar.md5 using pc odin 3.04 and still stuck on gnote boot image
and lastly updated with :: N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.. but to no avail..
please help
do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom
anubis1126 said:
do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom
Click to expand...
Click to collapse
actually was on the stock ics and tried to install kingdroid by CWM.zip
and wiped data and cache from touch/temporary cwm..
then after install it got stuck on the first screen...
since then have tried to flash stock ics / gb firmwares but not getting past the first screen
first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...
it can take 5 to 10 mins after install to start however if it still goes no further and you can get into recovery can you flash any custom kernal,if you can do so then wipe and try to reflash if not i would ask dr ketan as he is awesome and may be able to help
^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!
letters_to_cleo said:
first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...
Click to expand...
Click to collapse
i was using the temp cwm used to gain root to flash .. very stupid i know..
my recovery and download modes are accessible so is my phone toast..
and if yes it is toast .. how to recover ??
letters_to_cleo said:
^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!
Click to expand...
Click to collapse
since i do have warranty on my phone left for another 2 months should i give it to the samsung repair center ?? what will they repair and how much time is expected it to repair ??
I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method
letters_to_cleo said:
I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method
Click to expand...
Click to collapse
but sadly the stock recovery is not accessing my memory card files and only internal sd and it has no option to mount storage ..
how to access the files i put in my memory card.. or should i flash some other ics stock rom as they have more options in stock recovery ??
no need to aggravate the problem by flashing another ICS... your Note's been bitten already.. don't let it bite twice...
Your last rom flashed is KL3 then have you wipe cache and data from recovery?
If not then do it, it should boot then.
Make sure last rom was flashed correctly and u are currently on KL3
If you have to press home button in recovery to enter your choice then it should be gb (kl3)rom (on ics you need to press power to select)
If wiping cache and data also not work, then flash wipe version of gb rom. If it stuck at data.img then yu have got damaged and should send to service Centre, without doing anything
Sent from my GT-N7000 using xda premium

Categories

Resources