Database Develop

[Q] My w8 is not starting only showing sony ericsson startup screen.

I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
You will need a computer,download flash tool,download official w8 rom(original)
You can Thank me Now .

rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
do u see sonyericsson white logo on startup?
try using SEUS http://sony-ericsson-update-service.en.uptodown.com/
or try this
http://forum.xda-developers.com/showthread.php?t=1011071
gudluck

dont worry. everything will be alright. This is a chance for you to gain knowledges.
No fail no success.

Bricked phone
I also face the same problem when i use Xperia X8. Here is the solution for to recover it.
Please search for Xperia x8/w8 Update Service setup in google and install the software in your PC then do the below steps.
1) switch off your phone
2) Press the back button continuously and connect the USB cable from your system to phone.
3) Then run the updated service. It will take nearly 30 minutes to complete the software updated process.

Bricked phone?
I had the same problems the first time, i even had to take it back to where I purchased it since it had warranty, after they handed the phone again I stayed with the feeling that there was something I had to try I did it again and it stayed on the sonyericsson logo and didn`t enter the Xrecovery by pressing back button guess what I tried pressin the other buttons the menu and the home button and it enter the Xrecovery from there try doing a restore if you backedup your info if not you have to use flashtool and flash the rom
try going to Xperiax8(todo para este movil) and search Reparar Sony Ericcson Xperia X8 despues de Briqueo (repair phone after brick)
Recommended if you download a clean stock rom I used 1.6 donut and then installed the stock baseband 06 am pretty sure that flashtool has it if not follow this
download the stock firmware to your device and you are back in business

you may use flashtool to flash stock fw.now cwm may not works as it was on fw,

but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast

rishinhr said:
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
Click to expand...
Click to collapse
try flashtool then

thanks i am out of danger............finaly

I Think My phone is HARD BRICKED help needed pls
rishinhr said:
thanks i am out of danger............finaly
Click to expand...
Click to collapse
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...

arunvlnd8 said:
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
Click to expand...
Click to collapse
Restore with PCC
Sent from my E15i using xda premium

Or dl stock rom and flashtool. Flash stock using flashtool.
Sent from my rooted tomato using xda app

plz help me
i have same problem what can i do to backup rom ?

[Q] Boot Loop Problem

I'm stuck up with sony ericsson logo after installing the ROM CM 7.1. How to fix this issue.

Use PCC/SEUS to flash back stock ROM

Because you didn't click "full wipe" !

And u even just didnt bothered searching before posting...

omg is your s bootloader unlocked did you change kernel to nAa and post in Q/A

Actually what i did was , First i installed Ginger Dx, i can't use the phone continiously if too many apps are installed the phone get's restarted often. so i planned to change cm7.1. so i did wipe/reset data , after that i installed the CM7.1 ROM.The phone is stuck up with the sony ericsson logo screen. I heard by flash boot the image file will rectify this problem is it correct?

Mayank77 said:
Use PCC/SEUS to flash back stock ROM
Click to expand...
Click to collapse
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me

Vigneshj said:
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me
Click to expand...
Click to collapse
PCC= Sony PC Companion.
SEUS= Sony Update service.
Download programs. They are for updating our phone (and other sony phones).
We use them for repairing (we click on update and program say "you have latest android version or something like that and "do you want to repair it" !
With thoose 2 programs we fix soft brick...!

I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...

bore1989 said:
I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...
Click to expand...
Click to collapse
do you mean in flash mode ??? or turn on mode ??

[Q] Sony Ericsson text won't disappear

hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!

Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
repair it with PCC

Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool

BlackRabbit1703 said:
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
Click to expand...
Click to collapse
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8

Xaverek said:
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Click to expand...
Click to collapse
download
driver x8
gordon gates
install driver from C:\Flashtool\Driver

thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all

Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
It's just soft brick so you should have flashtool and some ftf files for your device maybe stock firmware and baseband update so you can unbrick your soft bricked device for any time. Just enter the flash mode and flash it! That's it! Just some advice for you
PS. Don't say thanks. Click "Thanks"

Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
well done dude! :good:

[Q] Bricked Xperia X8 (E15i) HELP!!! May be hard brick

Okay please help. I have an unlocked bootloader (or had an unlocked bootloader) on my X8, it was rooted as well. I decided I'd like to get a custom Rom so I attempted to install GingerDX. I installed Clockwork Recover mod and tested it out to see if it was working. It was so I decided to back the phone up. The back up worked fine and I moved the backup to my computer. Then I restarted the phone to install the GingerDX rom. I cleared all the user data and I then went to install a zip file then chose the zip file. The installation completed so I pressed the back button and it said something about it being unsafe and that I will have no backup but I thought it was going to be fine as I had a backup of the kernel and the system on my computer.
I decided to ignore the warning as the installation said it was completed as well. But when I rebooted using Clockwork recovery mod the phone was stuck on the Sony Ericsson loading screen and was for around 10 minutes before I turned it off by removing the battery. I tried to enter the flash mode and reinstall the kernel on to the phone through flashtool but this failed and after that I can't seem to enter flash mode at all.
Please, is there any way for this to work? I'm guessing it's a hard brick but is there anything that I could try to fix it considering I have a system backup and the stock kernel backup as well? Anything will be greatly appreciated and rewarded.

it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.

cascabel said:
it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.

J_T_ said:
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.
Click to expand...
Click to collapse
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.

cascabel said:
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.

J_T_ said:
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.
Click to expand...
Click to collapse
lol. no worries. believe me, i've been there too.
glad you found the solution. :thumbup:
Just because i don't doesn't mean i can't.

I got hard brick too
please help me! My X8 cannot boot and green led is off!

longlnn said:
please help me! My X8 cannot boot and green led is off!
Click to expand...
Click to collapse
what did you do? what happens when you try to power it on?
Just because i don't doesn't mean i can't.

cascabel said:
what did you do? what happens when you try to power it on?
Click to expand...
Click to collapse
i try power it on but don't have any sign life.
no led, no boot, no vibrate

longlnn said:
i try power it on but don't have any sign life.
no led, no boot, no vibrate
Click to expand...
Click to collapse
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.

Completely dead?
cascabel said:
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!

Spinalonga said:
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!
Click to expand...
Click to collapse
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.

cascabel said:
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?

Spinalonga said:
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?
Click to expand...
Click to collapse
send it to a nearby Sony service center because your manufacturing date isn't safe to perform the unlocking of the bootloader, and yes, it is indeed a hard brick

I have same problem, sony service center solved my problem with any cost, free for me.
Sent from my AD683G using xda app-developers app

I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!

mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
try charging it first my friend. leave it for about 20mins, check if it has life or if Flashtool would recognize it

mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
the date on the battery is irrelevant. what's the date at the back of your phone?
Just because i don't doesn't mean i can't.

I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?

mytch420 said:
I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?
Click to expand...
Click to collapse
looks like the battery may be the issue. can the battery of the vivaz (if it's charged) power on your x8?
Just because i don't doesn't mean i can't.

[Q] Xperia X8 hangs up at Sony Ericsson logo

Hello. This is my final resort. -.-
I used miniCM7-2.2.1. I've tried everything that has been suggested. My X8 hangs up on the Sony Ericsson logo and I cant access the xRecovery menu. To shut my phone down, I have to take out the battery, since it wont shut down when it hangs up no matter how long I hold the power button. Then I insert the battery again; but when I connect the USB cord, it starts up automatically and then hangs up again. I've tried flashing it but it wont detect in flash mode even if the led is green. so no luck on flashing. I tried SEUS but it says I already have the latest software installed so no luck in updating either. Somebody help! T.T
SUMMARY:
-Hangs up on logo screen
-Cant access xRecovery
-Doesnt detect flash mode (even when led is green)
-SEUS cant upgrade since latest software is installed
PLEASE HELP!

do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.

cascabel said:
do you have pcc and x8 drivers installed? try rebooting your pc and attempt to flash again. you should be able to get into flash mode. also install gg drivers.
also, i can't quite remember, but doesn't minicm7 require a custom kernel?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-

vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
Did you installed gordon gate drivers in drivers folder of flashtool?
Sent from my GT-S5360 using Tapatalk 2

vashmistofolees said:
yea. i've done that too. apparently, it still wont enter flash mode. -.- is there a software that reverts phones to their factory settings? without the need of actually interfering with the phone? ugh. -.-
Click to expand...
Click to collapse
only seus, pcc,or flashtool.. since you can't get into recovery.

i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?

Dear bro,don't PANIC! its the only thing that makes us to create a bit useless threads..
try with Flashtool second time!
and if doesn't work use PC COMPANION its your best Companion
repair the X8 via PC COMPANION
- Turn off the phone, and unplug it from the PC !
- On your PC, uninstall Sony PC Companion
- Restart your PC
- On your PC, clean any Cache and Registry related to Sony PC Companion, then restart PC again.
- Reinstall Sony PC Companion by downloading it from here
- Turn on Sony PC Companion on your PC
- In Sony PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall Sony PC Companion AGAIN, and start the above described process AGAIN. It WILL eventually work!

vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????

vashmistofolees said:
i got it flashed. i figured i'd insert the battery after i plugged into pc. then i flashed it with a stock rom for e16i. worked like a charm. however, i still havent found the right custom rom yet. does anyone has any suggestions?
Click to expand...
Click to collapse
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
x8bricked said:
even i have same problem bt mine it is getting switched on bt prob wit wifi n recovery mode ... in flash tool its cmin lyk in attachment.. any suggestion///????
Click to expand...
Click to collapse
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.

cascabel said:
based on your posts, you're on stock kernel, right? if so the roms i preferred when i was on stock was froyobread and gdx.
Just because i don't doesn't mean i can't.
---------- Post added at 02:56 AM ---------- Previous post was at 02:54 AM ----------
you're trying to flash a custom kernel? is your bootloader unlocked? what rom+kernel combo are you on that!s giving you wifi issues?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u

x8bricked said:
problem got solved after i repeatedly installed n uninstalled device n pcc in system... i repaired in sony pcc only..
i had already flashed it to custom rom with semc debrand .. my bootloader unlocked had gingerdx stock rom + nAa kernal 14
thank u
Click to expand...
Click to collapse
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:

Gogeta said:
Your bootloader is locked -_-
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
no its unlocked i checked twicw again its unlocked using msm7227 it shows 'r'

Well, I can tell you that I had a similar experience recently and I almost **** my pants. After having occupied the restroom, PCC worked for me absolutely perfectly, albeit I did have some problems installing the necessary drivers (had to do it from a different machine, obviously something in the registry was messed up).
Seeing you solved the problem, I recommend you install either a 2.2 or 2.3 ROM. Don't go for 4.x ones if you're up for normal use because they are way too strong for this little device (kudos to the developers who made these ROMs happen, though).
My recommendations:
2.2 - FroyoPro v2.5
2.3 - GingerDX v031b
Both work really well with custom kernels, and are very fast and stable.

My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?

Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
OK,assuming you have probably root the phone, by the way can you managed to go into recovery mode in your phone? If so, then just copy your rom zip files into the SD card and install zip files from SD card in the recovery mode. By the which Rom and Recovery you are using?

Banri1415 said:
My X8 has also the same problem, It hangs up in the logo screen and I cant go into the Flashmode, If I can only go into the Flashmode I have already fixed it, but my X8 opens up every time I plug it in my computer. Can anyone help me with this problem?
Click to expand...
Click to collapse
you use flashtool to unbrick your phone? if you use it and can't flash your phone, you have to install flashtool-drivers.exe in drivers folder. everything'll work well.good luck