Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Use ondemand . .
And 604mhz . . For RC5.5 by squadzone's . .
Sent From My GT-S5570 using xda premium
@PERFORMANCE
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Click to expand...
Click to collapse
Explaining everything about performance setting so WE could TWEAK it IF, WE KNOW WHAT WE ARE DOING.
THANKS
VR.gtmini said:
@PERFORMANCE
Explaining everything about performance setting so WE could TWEAK it IF, WE KNOW WHAT WE ARE DOING.
THANKS
Click to expand...
Click to collapse
On demand means the processor will clock to whatever speed within the set parameters it needs to run smoothly. It will always try to run as low as possible while not compromising speed. This is generally the best option and there's little to no reason to change it. Unless you want to save as much battery as possible of course, then you could put it to energysaving. You really don't want maxperformance as that will drain your battery and give little to no advantage over ondemand
The other is the clockspeed of the CPU and should generally be left alone. Overclocking it too much can permanently damage your hardware. There is no cooling system, so increase it very conservatively. You should leave it at stock, unless things are being slow, but don't put it too high. The higher you put it, the faster it will process yes, but also the more energy it uses and therefore heat it creates. Too much exposure to heat will mean game over. Overclocking is also likely to lower the lifespan of your device.
Hope that helps
can i have some script for better RAM management. and also tell me how to implement it [ i am a noob ]
& using mebitek's latest CM7 rom
thanx
pratap6789 said:
can i have some script for better RAM management. and also tell me how to implement it [ i am a noob ]
& using mebitek's latest CM7 rom
thanx
Click to expand...
Click to collapse
http://www.xda-developers.com/android/rom-toolbox-by-jrummy-sassibob-review/
Good post!
yippiiiiiiiii my 200th
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
1.do not oc your device more than 800 mhz and use ondemand governor,
2 .use the inbuilt option to choose the frequency because app like set cpu use 4~5 mb of your ram (setting> cm setting> cpu setting)
3. try using adw ex launcher it uses 11 mb ram only avoide go launcher
4. create a swap partition of 512 mb and set swapiness to 80%
5. use only default android keyboard (ics android keyboard is better)
6. use task killer to kill ongoing useless task time to time
7. do not use much widget at the same time
I remember mebitek or yagya or some other famous dude said that moving cache to sd card slows your device down..?
I set JIT off, and VM heap to 24. Also oc to 710 MHz, phone works like a charm. But i don't play games, i just want the phone to be snappy. I think the vm heap might cause fc's for bigger applications, at least playstore always force closes when i had VM heap at 16.. but otherwise the phone was really responsive with 16.
Battery is also good with those settings. Please correct me if i'm somehow mistaken!
jit on should be better
Sent from my GT-S5670 using Tapatalk
btw guys. ondemand and what min cpu freq. 122 or 245 i read somwhere that 245 use less battery
Sent from my GT-S5670 using Tapatalk
djozaa said:
btw guys. ondemand and what min cpu freq. 122 or 245 i read somwhere that 245 use less battery
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Just leave min cpu freq to 245, yes.
Also, if your kernel has Smartassv2 or Lilgv2 available, use those instead, they're better for Mini than stock Ondemand.
djozaa said:
jit on should be better
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
How so?
Sent from my GT-S5570 using XDA
(FOR BETTER PERFORMANCE IN CM9):-
go to settings
1)developer option-mark Gpu rendering ,windows animation &transitin animation as 0.5,mark kill app back button.
2)performance-use 16 bit,processor lilg as governor at max710(u don't see much flickers)
3)use apex launcher as default .(push it in to ur system-apps)
Related
What are some good profiles for my captivate with the 1.2ghz kernel and setcpu?? Thanks in advance..
Sent from my SAMSUNG-SGH-I897 using XDA App
bumpageeee
Made this post in another subforum http://forum.xda-developers.com/showthread.php?t=721156
Whatever you do don't use "power save"
Phone won't wake in that mode.
Sent from my SAMSUNG-SGH-I897 using XDA App
I just set it as 100-1200 interactive. Then set a profile when the screens off 100-600 conservative.
As long as the profile is set from 200mhz - (200-1200mhz) the phone won't shut off and you won't have to remove the battery I had this issue on my phone....
Sent from my SAMSUNG-SGH-I897 using XDA App
garebear0506 said:
As long as the profile is set from 200mhz - (200-1200mhz) the phone won't shut off and you won't have to remove the battery I had this issue on my phone....
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That's because you had it set on "ondemand" I had the same exact issue for a long time before I figured out that was the problem. It has something to do with the kernel doesn't support it right with setcpu or something. I read it somewhere on this forum. I've had it set at 100 min for the last 3-4 weeks and it's never not turned on (as long as it ISN'T set for ondemand).
I'll bump this thread to ask a question.
Around the time I installed SetCPU, I noticed a HUGE drop in battery life. To be honest, I'm not sure if SetCPU is the problem, or if I changed something else on the phone and that's the source of my problem. Anyone know anything that I could have changed unknowingly that caused my battery life to suck so hard.
Don't use set cpu if you can avoid it. Sre sets you to 1.2 ghz and unhelpful supplies a script if you are comfortable doing that.
Limiting speed with set cpu had little positive influence. As long as the scalling is working the cpu should idle with the screen off any how. The only situation I would change the clock is during an overheat condition but I'm running without set cpu all together.
If I'm interpreting unhelpful right the next kernel will make use of user space in set cpu and allow many new things including under voltage to save battery and the creation of custom clocks not written into the kernel so you aren't bound to his preferences.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Where /How
garebear0506 said:
As long as the profile is set from 200mhz - (200-1200mhz) the phone won't shut off and you won't have to remove the battery I had this issue on my phone....
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Where can you do that at? Is that where you make your own cpu speeds?
Use NSTools in any ICS ROM with Icy Glitch kernel.
DSDONE said:
Where can you do that at? Is that where you make your own cpu speeds?
Click to expand...
Click to collapse
hi all
i have installed prime hd 9 with custom kernel i want to exactly know at what min and max CPU frequency should i keep for good high speed performance which is stable i kept some frequency at random and it was not that much speed it slowed my phone and in what governor should i keep
I personally dont recommend doing anything with your CPU because from my experience I didnt see so much difference and speeding up your CPU will make you battery drain faster and you CPU will reach highier temps. For the governor I use the performance one because it is constantly keeping the clocks on the highest set values. It makes the phone work smoother and while changing clocks its slowing the phone down. You can try and look for every governor meaning but I recommend the performance one. To monitor the temps use SetCPU`s widget.
Smartass v2 the best
Sent from my E15i using XDA
I +1 what the guy above me said.
Sent from my R800i using xda premium
CosminAdriaan said:
Smartass v2 the best
Sent from my E15i using XDA
Click to expand...
Click to collapse
I agree this :thumbup:
Sent from my E15i using XDA
I also agree, Smartassv2 :good:
-------------------------------------
press thanks if I helped you:good:
Okay guys I've had this PA JB 2.1 with hydrocore running. Now I've used hydro v1 and 4.3 and both my battery is not great at all. I've gone back to v3.5 as I was running this one the longest. I have nothing synced at all aand I mainly use wifi to browse watch videos etc. Nothing to heavy at all. My phone has fully charged and in batterystats it says my phone has been on for 20 mins and it went down to 88%! Now is this normal for some of you or is their really any tips that truly work as I love this rom....I've asked before but I just need if possible tips that have proven to work.
Thanks all.
Sent from my GT-N7000 using XDA
You can change the Governer settings by using SetCpu and make your phone battery friendly.
Here you can find the tips
http://forum.xda-developers.com/showthread.php?t=1369817
sahilarora2003 said:
You can change the Governer settings by using SetCpu and make your phone battery friendly.
Here you can find the tips
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
Thanks for the link...its quite difficult to understand it all. I've got my gov as conservative and the Max freq set at 1000. I saw in the link that's recommended. I dont see friendly in CPU?
Sent from my GT-N7000 using XDA
You have a tonns of info, how to fix the things.
Check the second link in my signature.
First rule - any "dirty" install can't be counted as an objective reason for complaint. But - submit your BBS dump, as stated in the thread's OP anyway.
i was previously using Hydracore V4.1 with PA JB 2.1 and it has a very good battery life. i am currently on Jellycore V2 with Hydracore 4.1 again as the newer versions of the Hydracore seems to drain more battery so i sticked with the 4.1 version.
islandmixed said:
Thanks for the link...its quite difficult to understand it all. I've got my gov as conservative and the Max freq set at 1000. I saw in the link that's recommended. I dont see friendly in CPU?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Set it to lulzactive with noop scheduler and max freq to 1400...rest of the settings you can apply from the link given above. (For battery friendly)
Swyped From My Juicy Flavoured AOKP JB.
Ive set everything as stated except that friendly bit as I cant find it. The info in those threads are not easy reads for me lol...so I'm not understanding but after an hour of using just wifi to browse the web I've gone down to 79%. Also does having a theme kill battery as I have a theme set?
Sent from my GT-N7000 using XDA
Sent from my GT-N7000 using XDA
hi dev
I am using cm10.1 rc2 but it has alot of lag. Any way to improve it? ??
Replace your ace processor amd gpu buy an S4 dissemble is octa core and gpu and glue it on ace it will be so much faster
Just kidding
Dont fill up system and data
Try ram management script's
U can try using swap if u have a fast sdcard
Overlock it a bit and change governor smartassv2 always got me on the good away
Use lite browsers and launchers
Thats all u can do
Sent from my GT-I9300 using xda premium
xactor said:
hi dev
I am using cm10.1 rc2 but it has alot of lag. Any way to improve it? ??
Click to expand...
Click to collapse
Install juice defender ultimate from Google Play™ & overclock ur phone a bit more than usual via No-frills.
You'll see the difference
Sent Via XDA™ Premium
Galaxy_Rohit said:
Install juice defender ultimate from Google Play™ & overclock ur phone a bit more than usual via No-frills.
You'll see the difference
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Juice defender don't boost your performance and nofrills is USELESS in CM roms because they can set de frequencies without 3er party apps... cm roms have in-built a system to OC/UV CPU frequencies... installing apps you only get more lag because they'll increase your ram consumption, the best way to reduce lag is bareboning the rom, kill useless process and using some scripts could help too
I'm damn sure No-frills increases performance but increases battery usage as well, so for this use juice defender. Both of them are just ~3mb (combined) so need to mumbo jumbo for free space... lol
Sent Via XDA™ Premium
Use greenify, and select all those apps that remain open, such as facebook, viber ...
Galaxy_Rohit said:
I'm damn sure No-frills increases performance but increases battery usage as well, so for this use juice defender. Both of them are just ~3mb (combined) so need to mumbo jumbo for free space... lol
Sent Via XDA™ Premium
Click to expand...
Click to collapse
JAJAJAJAJAJAJAJA
Please listen to me, in your cm7/9/10.1.0 rom go to settings> dev options and set the frequencies that you want!!! forget to use 3er party apps to control CPU speed!!!!
Ver3go said:
Replace your ace processor amd gpu buy an S4 dissemble is octa core and gpu and glue it on ace it will be so much faster
Just kidding
Dont fill up system and data
Try ram management script's
U can try using swap if u have a fast sdcard
Overlock it a bit and change governor smartassv2 always got me on the good away
Use lite browsers and launchers
Thats all u can do
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
xactor said:
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
Click to expand...
Click to collapse
Greenify used to make a difference on my ace also. Give it a try. It helps to hibernate unnecessary apps
Sent from my GT-I9300 using xda premium
xactor said:
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
Click to expand...
Click to collapse
i m using stock 2.3 based rom cozz roms based om cm7+ consumed so mch battery and performance is also not too good.
Try my build.prop tweaks...
Sent from my GT-S5830 using xda premium
Hi all.
Dont know if this is a stupid request
I am on CyanogenMod based ROM and i want to save battery (maybe) disabling some cores of my O4X...
I read this
http://forum.xda-developers.com/showthread.php?t=1804461
but not working on CM ROM so...
I ask you!
I read also this 2 threads but I dont know if they are only for htc one x
http://forum.xda-developers.com/showthread.php?t=1630200
http://forum.xda-developers.com/showthread.php?t=1652136
There are tricks to enable only 2-3 cores or something like this?
For CyanogenMod of course!
Sent from my LG-P880 using xda app-developers app
Hi, you could try with this nice app called Tegra Overclock. I've been using it for quite a long time now and I really like it. It's very simple and you can REALLY set how many CPUs you want online + there are also some other options for OCing etc.
Oh and btw, I just tried that app from the HTC One X thread that you pasted and unfortunately, it doesn't do the job. :/
https://play.google.com/store/apps/details?id=com.tegraoverclock&hl
scarfaceq said:
Hi, you could try with this nice app called Tegra Overclock. I've been using it for quite a long time now and I really like it. It's very simple and you can REALLY set how many CPUs you want online + there are also some other options for OCing etc.
Oh and btw, I just tried that app from the HTC One X thread that you pasted and unfortunately, it doesn't do the job. :/
https://play.google.com/store/apps/details?id=com.tegraoverclock&hl
Click to expand...
Click to collapse
thank you:thumbup::thumbup:
Sent from my LG-P880 using xda app-developers app
No problem. I hope that It will help you with your battery life.
also cpu tuner and trickstermod do the job pretty well. If your aim is to save battery check cpu tuner out
But seems that trickster mod dont save those settings for me...
Multicore Power Saving
always set to 0
Max Active CPU core
always set to 1
No way to fix them (various rom and kernel tested).
AND
Seems that tegra overclock fired up my CPU (CPU never goes under 1000 Mhz but always on max)
my phone after few minutes reboots in bootlop cause the temperature reached !
I reinstalled the ROM!!
LOL experience!!:banghead:
Sent from my LG-P880 using xda app-developers app
You need to set up min/max cpu that way u wont be stuck on max cpu speed and overheat your phone.Tegraoverclock is fine but i am kinda used to SetCpu app.Download cpu spy from market and watch deep sleep that way you will know whats going on with cpu all the time.BetterBatteryStats are fine too.