First of all, i want to introduce myself a bit, cause it`s my first post - i followed this great forum for quite a while now and learned a lot by reading stuff, though i`m still just a user... by using some howto`s i was able to flash huexxx rom zeus 3.2n and i`m very satisfied with it in daily use.
However, i would like to use Temaseks Kang or the stock CM7 and that`s my problem... It doesn`t matter which of the two roms i try - i don`t get service and there is no apn. i can`t check for available services but phone connects if i choose to sign automatically, but even then there`s no apn available.
I tried to fix the apn manually but can`t save - means, i can save but apn won`t appear after saving.
Additional information: I did a full wipe before installing cm7/temaseks kang, wiped dalvik cache, tried factory reset after installing - nothing works.
So, i hopefully await some help from this community - hope it`s not too noobish...
greetz, nbt
Happened to me once. All i did was as this :
- In APN settings, press menu and click "Reset to defaults".
- Either default APN settings from your service provider will come automatically or it won't.
- Even if it doesn't appear, reboot your phone. Just give a little time before rebooting the device after you click reset to defaults, so that if sim card is sending any message to retrive the APN settings, it would finish.
I had got my APN settings back after 2 reboots with this steps. Hope you too..
try "Apn Manager" or "apn backup and restore" you can find these in the market, maybecan helpyou
I tried both - no effect
i won`t get a connection to service automatically. If i try to scan for available services, i get an error, if the phone chooses, i get a connection but no apn.
after rebooting, there`s no service-connection and i have to join by hand. argh!!!
anybody a solution for this? am i the only one having this freaking problem?
edit: went back to zeus, got service, got apn without problem... what`s wrong with cm7?
Related
Well recently i bought a LG Optimus Black, at the begining internet and all worked just fine, and now suddenly i cant connect to internet.
I am able to connect to a wifi network, but 3g wont work, how can i fix this?
Every opptions are right.
I tried the same sim card in Samsung GalaxyS2 and some other phone, it works fine. So it has nothing to do with the SIM.
try to configure your 3g network, look for it on the internet.
i only had this problem when i install NOVA ROM, but it was easy to solve the problem.
I have tried but not helping.
Is it running on Stock ROM or NOVA?
Just like lucasmalaguti said, this problem happens only on custom ROMS.
Anyway, just check your settings.
Settings > Wireless & Network > Mobile Network > Access Point Names
Search on the internet or ask your provider for the setting configuration.
Also, if you have a few Access points, Eg. MobileInternet1 & MobileInternet2, make sure the right one is checked.
Download APN Backup & Restore app from market to delete and re-add Access Point.
Once edited/add, reboot phone for changes to take effect.
Check your APN settings
Sent from my LG-P970
I'm running a stock V10E ROM
My APN settings are OK (sent from my provider)
Tried to manually add it, but nothing helps
Today i called LG Service support.
They say that i am not the only one with this problem.
The problem seems to be caused by automatic software update (V10A => V10E).
Only solution is to reflash ROM.
So i did that and now everything works fine.
Thank you all for trying to help!
I have same problem, how do i re-flash to the old fw
Hi, I got same problem please tell me how can i re-flash my previos fw? thanks.
Hello! I'm newbie
I have the same problem. Please help! What is this ROM? How can I do this? Can this really fix my internet problem? thank you
Had same issue, thought it was the carrier but it could be the phone, hope this helps
1. turn off your OB and take the sim off
2. test the sim's 3g on some other phone
If it's working
3. put it back in your OB = problem solved
It it's not working
3. call your service provider
Folks
Samsung I9000
Firmware 2.3.3
Kernel 2.6.35.7-i9000XXJVK
When I first got this phone I could save the network APN.
However I find today that the APN has been removed and every time I try
to save it , it just does not save.
The phone has recently been rooted but I am sure the APN stopped working
before then, but I could be wrong.
Any sugestions.
Matt
Sounds pretty odd. Try factory settings restore.
I use this to backup APNs
Dont woory ...!
Just use DarkyOta u can download it from market .
And under tab backup/restore user data u can save your network APN...!
And much more...!
do we need to keep a backup of APN ?? I don't have it as yet.
What is even more off , is that this morning checked the phone at the APN
had come back in , all on its own.
Very odd , no real idea what is causing this.
Will certainly try and back up of the APN and see if this makes any difference
I'm having a similar problem with my rooted HTC Sensation XE with Energy ROM.
Version: 2.3.5
Kernel: 2.6.35.13-gc35910f
ROM: Energy
After rooting, my APN will disappear every time I restart. I've flashed different ROMs and factory reset, etc but still the problem persists. I've figured out that when I reset, the MCC and MNC values in the 'telephony.db' file change from 505 and 02 (which are my carrier settings) to *505 and *02. Where does this astrix come from and how to I get it to stop being added on restart?
After upgrading to the LPY. My phone seems to be plagued with the problem of Mobile data not turning ON. It works sometimes and then after a while the 'E' icon in the status bar disappears and the data doesn't turn on no matter what.
I restarted the phone dozens of times. Removed the battery, removed the SIM. I even hit *#9900# and disabled the fast dormancy. No luck whatsover.
Could someone please help me out here??
I had to delete existing APN's and
Settings - More - Mobile Networks - Acces Point Names
press Menu now - choose Reset to default
For me it worked...
BTW do not forget then to select the one that is meant for internet (not wap, mms)
akshay, i had the same problem. just do a factory reset from your phone. be sure to backup your data via kies first if you want to save your data.
Thanks for the quick response. I deleted the APNs restored to default. Still no luck.
I don't want to factory reset cuz its way too much work to install everything again!
I would strongly suggest not doing a factory reset under lpy.
Another option that may help which I have done a few times successfully is to go to manage applications, find the dialer app and delete cache and data. This should reset your data connections and will prompt for the connection you need before reapplying.
Hope it helps.
Sent from my GT-N7000 using xda premium
Akshay Ravi said:
Thanks for the quick response. I deleted the APNs restored to default. Still no luck.
I don't want to factory reset cuz its way too much work to install everything again!
Click to expand...
Click to collapse
Are you rooted?If yes,change the modem.Modem might be causing the issue probably.
I have a problem with this phone. I got it locked to a network so i rooted it and changed bootloader to new bootloader and instaled kowalski kernel ((alpha) now I'm on M1 and the problems are still here)), after that I tried many different ROMs but I get the same problem all the time. First problem is that my phone finds a network and I can recieve calls and messages but no data connection and I can't save an APN (I fill in everything and when I click save it just brings me to APN settings without the APN iI tried to create. Second is the random reboots, it just happens when I do stuff (doesn't matter what). And the last is bootloop which happens and then I leave it just to turn it on later without problems.
Could you please help me and tell me what kernel, ROM, bootloader, baseband and everything to install to make it work. I don't care about the data that will get erased. I just want it to work (even on stock ROM and kernel which I can't find) THANK YOU IN ADVANCE GUYS
As the title says i wiped /System and now can't get past the sony logo. What would be the best way to fix this? Thanks
Flash a ftf
It worked
Thanks a lot,took a while but it worked. Now I have a follow up question. I ended up bricked because I'm currently on SlimKat and I wanted to put a lollipop ROM,Resurrection LBL. I also want to use the Pico Gapps from PA,as it only flashes Play Store and nothing else. The problem is when I start flashing Resurrection it says my device is "lbhuashan" and not "huashan" and fails. When I flash pico gapps it says I have to wipe /system (which is how I ended up bricked) and fails. Is there a way I can bypass these two issues?
Can anyone please help me out with this? Thanks.
Allanitomwesh said:
Can anyone please help me out with this? Thanks.
Click to expand...
Click to collapse
firstly flash cm11 by bagyusz and then you can flash cm12 by him as well
I will try this and tell you how it goes thanks.
How about flashing Pico GAPPS?
Allanitomwesh said:
I will try this and tell you how it goes thanks.
How about flashing Pico GAPPS?
Click to expand...
Click to collapse
install cm12, reboot disable adaptive brightness, flash gapps and it should work good
Spasik said:
install cm12, reboot disable adaptive brightness, flash gapps and it should work good
Click to expand...
Click to collapse
Hi there, i did this and for the most part,it worked.
Both CM11 and 12 flashed without issue.
There was no "adaptive brightness" setting under "settings-display" so i just flashed gapps. It flashed fine.
The problem is that during initial setup the phone sets up mobile network,and at that point when it says "may take upto five minutes" it goes on for more than five minutes,so i skip this setup. At that point,i can see the 3G logo H+. When i finish setup having skipped that particular setup, i go to "settings-more-mobile network" and immediately the H+ becomes an exclamation. When I open APN, it is not correct, for my network Safaricom Kenya. Even after I correct it though, the exclamation remains. So then I have fully working CM12,correct APN settings. But no mobile data.
I have tried the following fixes
Reboot into recovery,wipe cache,wipe dalvik. No success
Delete default APN,put APN manually,reboot. No success
Dont delete default APN,add new APN,switch to new APN. Reboot. No success
Edit default APN. Save edit. Reboot. No success.
Reflash ROM, let "may take up to five minutes run. No success,runs indefinitely (phone starts to lose charge)
I'm at my wits end here. Other than mobile data not working,everything else seemed fine. I have flashed back to CM11,which ironically,has the exact same wrong APN as CM12 as default ,and when I edit it and save the edit,i get mobile data.
Am I doing something wrong?
Allanitomwesh said:
Hi there, i did this and for the most part,it worked.
Both CM11 and 12 flashed without issue.
There was no "adaptive brightness" setting under "settings-display" so i just flashed gapps. It flashed fine.
The problem is that during initial setup the phone sets up mobile network,and at that point when it says "may take upto five minutes" it goes on for more than five minutes,so i skip this setup. At that point,i can see the 3G logo H+. When i finish setup having skipped that particular setup, i go to "settings-more-mobile network" and immediately the H+ becomes an exclamation. When I open APN, it is not correct, for my network Safaricom Kenya. Even after I correct it though, the exclamation remains. So then I have fully working CM12,correct APN settings. But no mobile data.
I have tried the following fixes
Reboot into recovery,wipe cache,wipe dalvik. No success
Delete default APN,put APN manually,reboot. No success
Dont delete default APN,add new APN,switch to new APN. Reboot. No success
Edit default APN. Save edit. Reboot. No success.
Reflash ROM, let "may take up to five minutes run. No success,runs indefinitely (phone starts to lose charge)
I'm at my wits end here. Other than mobile data not working,everything else seemed fine. I have flashed back to CM11,which ironically,has the exact same wrong APN as CM12 as default ,and when I edit it and save the edit,i get mobile data.
Am I doing something wrong?
Click to expand...
Click to collapse
Have you your bootloader unlocked ? If yes try RR 5.4.0 by Furrydaus Build4 + Tangerine kernel v1.2 everything is working perfect there
No i do not. How do I unlock it?
@Allanitomwesh This is how you unlock the bootloader.