I have jw4 with cf root ketnel but i when flash semaphore 2.5.0 by odin i dont retain root.
Theres other way to flash and retain root bcz i really want to oc the procesor speed plz help
Sent from my GT-I9000 using Tapatalk
It shouldn't remove the Root, install Superuser after you get Sephamore.. You can Overclock in the Sephamore settings, be very careful, I over clocked too much and my phone start freezing on me every time it booted.
Thanks it helped, do you suggest oc of 1200?
Sent from my GT-I9000 using Tapatalk
Gildegan said:
Thanks it helped, do you suggest oc of 1200?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Overclocking is dependent on your processor and due to manufacturing discrepancies all phones are different so trial and error are the way forward, don't set anything as boot settings until you know it is stable
Sent from my GT-I9000 using xda premium
Hello everyone!
Is there anything to do to minimize or get rid of lag on my note? I am runing ICS4.0.3 official UK version, phone been rooted, franco kernel, very recently I have noticed that phon is very slow to respond and sometimes it freezes. Any ideas how to improve performance?
Sent from my GT-N7000 using xda premium
Flash Speedmod Kernel for ICS
It's smoother and has no lags.
Gesendet von meinem GT-N7000 mit Tapatalk 2
pavulon77 said:
Hello everyone!
Is there anything to do to minimize or get rid of lag on my note? I am runing ICS4.0.3 official UK version, phone been rooted, franco kernel, very recently I have noticed that phon is very slow to respond and sometimes it freezes. Any ideas how to improve performance?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Use Thor V11 kernel. I have used about 5 different kernels and this is by far and away the best one. I overclock and undervolt. Also get away from stock ICS as it's well know that it's 30%-40% slower than custom ROMs. ParanoidAndroid is a good customer ICS ROM. You can change between phone and tablet mode or hybrid which is a mixture of the two on a per app basis. This ROM and kernel will help with lag else you just have to suffer with the official ICS and make do with a kernel that may help a little.
I'm running CM10 nightly, and wondering if I will gain any performance improvement (without OC) and longer battery life if I flash one of the alternative kernels on XDA (looking at Devil and Semaphore as those seem to be the most popular)?
yes and yes, but it all depends on how you configure the kernel options and how you use your SGS...
Sent from my GT-I9000 using xda app-developers app
yes, definitely!
but to get the "best" result, of course you have to let it settle for atleast 3 days..
here is a youtube link on how to flash them: http://www.youtube.com/watch?v=kCBN-_zu5cY
i hope this helps,
cheers
Thanks for the answers. I was hoping for recommendations, do you have any?
Semaphore is looking good to me. Opinions?
I'd go with semaphore for ICS...
But for CM10 I'd use Devil..
But that's just me
Sent from my GT-I9000 using Tapatalk 2
If you want stability then semaphore.But if you want more tricks to make your phone even faster it is devil of course. There is one more kernel to try Mackay.
Test each to get the right one for you.
Sent from my GT-I9000 using xda premium
Semaphore is the one you need .
What else from having great speed with stability. Yeah, maybe Devil could provide some more speed, which is unnoticeable, for me at least.( except the benchmark tests )
Sema is the most stable one.
But devil isn't bad too.
Try them. But give your phone about 5 minutes after flashing and don't be frustrated when it's a bit laggy after first reboot.
Last days I tryed makay. --> I prefer sema
Sent from my GT-I9000 using xda app-developers app
I prefer devil. My phone still lasts a whole day (7am - 12pm) and is much faster. I like all the options.
Sent from my GT-I9000 using xda premium
On JB roms i always use the devil kernel even if the Semaphore is a very good kernel, Devil kernel allows me to entirely use my phone's habilities with no more battery drain than Sema
you will instantly notice more speed and smoothness with flashing semaphoer kernel.
+ more speed if you set up liveOC to 114%
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
frazefast said:
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
Click to expand...
Click to collapse
You should read the description more carefully. The 2.8 kernel is for JB 4.2 not CM10. Flash the 2.6.5 kernel.
Sent from my GT-I9000 using xda premium
Devil cause you are able to set wifi mode: powersave, stronger
Sent from my GT-I9000 using xda premium
Hello;
If I whant to get the most from my phone what kernel should i use and please if you can put some download links for kernel that you are suggesting.
Model Number:GT-I9000
Android version:4.1.2
Baseband version:I9000XXJVT
Kernel Version:
3.0.31.gdabec1a
[email protected]#1
CyanogenMod Version:10.0.0-galaxysmtd STABLE
Build number:
cm_galaxysmtd-userdebug 4.1.2 JZO54K
eng..20121113.054130 test-keys
Thank you for your time and suggestions.
The one and only Semaphore. Newest version 2.6.5(s)
The (s) is for if you use 403MB RAM configuration.
www.semaphore.gr
Sent from my GT-I9000 using Tapatalk 2
I have few more questions...will i flash only kernel or i need to flash the rom together with kenrel...and can i use odin to flash kernel?Sorry for all thease questions im noob guy in this area
You don't have to flash a rom if you're happy with the one you're using. And you can download .zip's and flash in CWM if you like, but I've found that the only times I've ever got into a boot loop when flashing a kernel are by doing it this way. Not that it has happened often. But for that reason, i prefer to flash my kernels .tar in odin, I've never had a problem doing it that way, but whatever way you choose to do it take a nandroid first, just in case.
Sent from my GT-I9000 using Tapatalk 2
Kernel flashed via odin...everything works perfectly! Thank you
LeRadelle said:
Kernel flashed via odin...everything works perfectly! Thank you
Click to expand...
Click to collapse
Glad to hear it. No problem
Download semaphore manager app if you haven't already done so. Also, if you used the (s) version, you need to make sure and select the bigmem option in semaphore manager and reboot for settings to take effect. Then you have 403MB RAM.
Sent from my GT-I9000 using Tapatalk 2
Hey all..
So i'm following this thread and it asks to find an undervolted kernel :/
Well.. I don't have one.. as well as my ROM is stock JPJV6 GB.. and it's lag fixed.. with vodoo kernel
I looked it up and found that OC/UV Beater2 can undervolt you kernel but it says that my kernel doesn't support it.. what do I do now??
You need to flash a kernel that supports under volting. Eg Semaphore.
Sent from my Nexus 4 using Tapatalk 2
snapper.fishes said:
You need to flash a kernel that supports under volting. Eg Semaphore.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Do I have to disable the lagfix? and does Semaphore has lagfix?
I think everyone is using voodoo lag fix nowadays, so it should be fine even if you leave lag fix on. However, make sure you are flashing the version for Samsung rom, not AOSP roms.
Sent from my Nexus 4 using Tapatalk 2
I read {somewhere?} that battery percentage doesn't report correctly, does cm12 fix this?
{Somewhere?} Someone posted variables or some linux hw sensor id for voltage and hypothesised mapping it as a percentage to the battery capacity
How long does it take to charge?
What accessories are compatible
Sent from my XT894 using Tapatalk
Cm12 overclocking?
Sent from my XT894 using Tapatalk
Essentially what I want to know is if overclocking can be applied to a preexisting rom rather than requiring a reflash
Sent from my XT894 using Tapatalk
mirddes said:
Essentially what I want to know is if overclocking can be applied to a preexisting rom rather than requiring a reflash
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
You want to overclock on the stock ROM?
Try this:
http://forum.xda-developers.com/droid-4/development/stock-overclock-t3060269
Borchuck said:
You want to overclock on the stock ROM?
Try this:
http://forum.xda-developers.com/droid-4/development/stock-overclock-t3060269
Click to expand...
Click to collapse
Nah, I want to overclock the latest cm nightlies, without having to use an alternative rom. I want to be able to occasionally flash the latest nightly without having repeat the process of overclocking.
How much better is slimkat compared to both latest stock and latest cm12.1?
Sent from my XT894 using Tapatalk
mirddes said:
Nah, I want to overclock the latest cm nightlies, without having to use an alternative rom. I want to be able to occasionally flash the latest nightly without having repeat the process of overclocking.
How much better is slimkat compared to both latest stock and latest cm12.1?
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/droid-4/development/5-0-custom-oc-kernel-t3041512
IMO stoch ROM is the best for a daily use.