Related
Tried flashing an I9000 rom over a previous I9000 rom and now the phone doesn't boot up all the way. It gets past the AT&T World phone and Samsung splash screens but then goes to a blank screen in which the capacitive buttons are responsive and the phone will vibrate once, accompanied by 2 faster vibrations.
I've tried all the different button holds to get into download mode but none of them seem to work. ADB doesn't work either so Odin3 isn't an option atm.
Is my only option to buy a dongle to force download mode?
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Read the sticky and try the other method before getting a jig... might work
Sent from my SAMSUNG-SGH-I897 using XDA App
If all else fails you can make a cheap jig with 3 resistors and no soldering for under $1 from radio shack... search the captivate forum for 3 resistor jig
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
slifer315 said:
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Click to expand...
Click to collapse
Yah, forgot about the whole flashing back to stock thing since I hadn't used the thing for a couple weeks now. I'd only been using an Incredible for different roms. I think I'll just make a jig later.
dq13 said:
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
Click to expand...
Click to collapse
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
paperclips said:
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
Click to expand...
Click to collapse
Yes because you have no 3button combo. Your only bet would be to use a jig to get into download mode. And no I would not even try to do a nandroid backup because those can cause the same issue unless you are running the same Kernel as the backup.
Ok, have made the jig and am now in download mode. One problem though, even though I have the drivers installed for Windows X64, it is being read as an unknown device. So still no luck with Odin.
Any ideas?
Anyone help?
paperclips said:
Anyone help?
Click to expand...
Click to collapse
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
mcord11758 said:
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I got the computer to recognize the drivers after messing around with some stuff but now Odin3 is stuck at file analysis.
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
+ 1 make sure odin us fully booted prior to plugging phone in. you are almost there
Sent from my SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That's what I did and still nothing. I'll just keep trying it and let you know if I vet it working.
I had the same issue and still no luck. In download mode and even pointing it to drivers doesnt work. Like its not recognizing it as a android device even though its in download mode
I have videos for ODIN...Check my sig...
Ok, after about 1000 tries and getting ready to lose hope, I got it to work by holding it a different way. I think it was just a USB cord problem in the end. Thanks everyone for your help. Unfortunately, my other phone, Samsung Focus, took an unfortunate fall preceeding this fix making this win feel kind of insignificant.
After looking for quite a few hours on google and xda the only solution thats shows up is to use a jtag and quite frankly that scares the pants off me
here is what happened
-i upgraded the device to froyo then did the super one click root in order to root
-after that i installed the modified recovery to turn off the signature check
-after doing that i flashed clockwork mod renamed update.zip through recovery
-after that i flashed the ICS beta but i could not get the main zip to work through recovery the only other zip i had on my sd card was the kernel so i flashed that and it worked, in clockworkmod 5.0 it wiped everything on the phone so i reloaded the 2 zips i flashed the rom there and it rebooted. (this is out of order from the thread so i know this is what causes the next problem.
now when ICS boots up i get an encryption unsuccessful screen saying i need a factory reset, only option given is reboot now. can't bypass the screen, can't access via adb (driver install fails on windows too), cant get into download mode, and can't get into recovery.
how screwed am i
device is
Samsung captivate
-build number 1009
You need Gingerbread bootloaders.
And since you cant get into download mode... You probably need a USB Jig.
Good news is that you see something at startup. I doubt you are totally screwed then.
Second the jig as an option. It has quite the track record on this forum as making the captivate almost un-brickable.
What have you tried as far as getting your phone into download mode? There are sometimes multiple ways (Vol-up + Vol-down while plugging in USB without battery, sim, or microsd installed is how I always seem to get it working). Here is a list:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
To my knowledge, none of that information is dated... but there are those here that know far more about it than I ever will.
none of those methods worked, it just stinks if it would have been any other rom i would have been fine i think but since i can't do anything in user space and everything i do takes me to the ICS android screen i cant do anything.
also for the record i am a noob to samsung devices but i have been doing this stuff to HTC devices for years
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
b-eock said:
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I have no recovery or download mode or atleast nothing is letting me into them
Sent from my Touchpad using Tapatalk
b-eock said:
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
He flashed ICS over froyo... are froyo bootloaders compatible?
Im assuming not and thats what caused the brick. Either that or CWM5 doesnt like froyo BL's. Either way.
erbsmokah said:
He flashed ICS over froyo... are froyo bootloaders compatible?
Im assuming not and thats what caused the brick. Either that or CWM5 doesnt like froyo BL's. Either way.
Click to expand...
Click to collapse
They are compatible...
Sent from my SGH-I897 using xda premium
Did you try this method to get into download mode?
1. Turn off phone, remove sim, battery, sd
2. hold both volume buttons, keep holding for remainder of instructions
3. insert usb
4. insert battery
This has instantly granted download mode on every captivate i've ever tried.
b-eock said:
They are compatible...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
The team hacksung project might be compatible, but the straight port says in the op that you need to flash kf1 first, which included bootloaders.
You aren't hard bricked and your device is recoverable.
If you are still on the froyo bootloaders, try unplugging the usb cable, removing the battery, sim and sd cards, hold vol up+vol down (don't hold power), and plug the usb cable back in. It should take you to download mode.
If your phone responds to adb while it's booting, you can just issue a quick 'adb reboot download' or 'adb reboot recovery' to get it to boot into either without the button combos.
If either of those don't work, you can try forcing it with a usb jig (just a 301k resistance over pins 4 and 5 of the microusb port). Build a jig, take the battery out, plug the jig in, make sure not to touch the jig while it's in or you'll change the resistance and won't work, put the battery back in and it should kick your phone into download mode. Once you're there, simply remove the jig and plug the usb cable back in.
Sometimes the download mode graphic won't show up even if you are actually in download mode. If the phone looks like it hung, try connecting it to Odin anyway and see if it recognizes it.
Edit: forgot to mention, try using adb from linux (virtual machine or livecd will work too). You shouldn't have to mess with drivers and it's worth a shot.
modest_mandroid said:
You aren't hard bricked and your device is recoverable.
If you are still on the froyo bootloaders, try unplugging the usb cable, removing the battery, sim and sd cards, hold vol up+vol down (don't hold power), and plug the usb cable back in. It should take you to download mode.
If your phone responds to adb while it's booting, you can just issue a quick 'adb reboot download' or 'adb reboot recovery' to get it to boot into either without the button combos.
If either of those don't work, you can try forcing it with a usb jig (just a 301k resistance over pins 4 and 5 of the microusb port). Build a jig, take the battery out, plug the jig in, make sure not to touch the jig while it's in or you'll change the resistance and won't work, put the battery back in and it should kick your phone into download mode. Once you're there, simply remove the jig and plug the usb cable back in.
Sometimes the download mode graphic won't show up even if you are actually in download mode. If the phone looks like it hung, try connecting it to Odin anyway and see if it recognizes it.
Edit: forgot to mention, try using adb from linux (virtual machine or livecd will work too). You shouldn't have to mess with drivers and it's worth a shot.
Click to expand...
Click to collapse
i will try it out the jig is the last thing i want to do, luckily this isnt my everyday phone but i would like to get it working hopefully
thank you everyone for the help expect me to hit some thank buttons soon
Were you able to get this working again? If so, how? My Captivate with Build 11 of ICS that had been running perfectly for a week got the message you saw regarding encryption.
I couldn't reset, I tried one click back to stock, and now I just get messages saying can't mount /dev/block/mmcblk0p1.
Unbricking Cappy
Are you able to go to CWM using the three button combo? Try pulling out the battery, reinsert, Hold vol-up + vol-down
and hit power button. Let me know whether CWM menu is appearing or not
All I have to say is wow, not one of those things are true
UCKF1 was the first GB leak for the Captivate, not official Froyo wtf :S
you also don't just connect and power on?!
Who ever needs help, don't listen to this dude, he obviously doesn't know his facts!
Short answer is problem was solved by my friend having a jtag jig
Sent from my PG86100 using XDA App
thoughtlesskyle said:
Wait who is this directed at, if its at me cool dude sorry for asking for help, the answer you have given has been invaluable to solving the problem. This was solved turns out a friend of mine had a jig, glad you went out of your way to lend a useless opinion
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Yahh you meed to edit your post, that wasn't to you it was to ROMMaker. So don't get your panties in a wad.
Sent from my SGH-I897 using xda premium
b-eock said:
Yahh you meed to edit your post, that wasn't to you it was to ROMMaker. So don't get your panties in a wad.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I don't know what good editing my post will do since you quoted it but sure
Sent from my PG86100 using XDA App
Other people who have this issue, try this:
http://forum.xda-developers.com/showthread.php?t=1447303
thoughtlesskyle said:
Short answer is problem was solved by my friend having a jtag jig
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Hey,
Could you tell us more about how it was resolved?
I'm having the same issue here.
had stock rom 4.04 XXLRB, than i wanted to root using http://forum.xda-developers.com/showthread.php?t=1329360
here i saw this :
Using CWM.zip (temporary/Touch recovery)method to root is said to be unsafe by entropy, and till safe release don't use it
Read This http://forum.xda-developers.com/show....php?t=1810954 and i clicked on last link and via Odin installed CF Root kernel CF-Root-SGN_XX_DBT_LRQ-v5.6-CWM5.zip , i done that and later install TriangleAway v1.95.
Than wanted to install ROM LiquidSmooth » JellyBean RC 3 » 29th Sept, and i wanted to do via CWM mode, and all goes good untill i saw on display : Erasing the system.....i wasnt near phone 1 minutes and display was black/turned off. I aited some 20 minutes, and nothing. Than i decided to try to turn on, nothing, dead. I leave battery out for some time, put back battery....nothing happened. PC cant see phone via USB.
I guess this is hard bricked phone or maybe not. I googled for solution, nothing. Maybe someone have expirience how to fix this?
put the phone in download mode by pressing vol down +power +home
Sent from my GT-N7000 using xda premium
tried already few times, nothing, still dead
Try a difference battery or keep it in charging for a while. may be the battery is dead
Sent from my GT-N7000 using xda premium
---------- Post added at 03:40 AM ---------- Previous post was at 03:40 AM ----------
different* damn auto correct
Sent from my GT-N7000 using xda premium
will try, but battery was full just before starting rooting...thanks for replies man, will let you know
Press vol down, power house 20 seconds, Vol up later. Connect your phone to your computer and see if the phone detects PCOdin.
If it detects three file upload stock ROM GB.
tried all that, nothing happened. Battery is charging when i connect charger, i can feel phone is hot.
still dead
PC Odin does not see your phone? And the computer when connected to the phone seems a sound?
odin cant see my phone, no sound when connecting phone to PC via USB
You probably do not have the Samsung drivers installed on your computer.
Download Kies network and install the drivers off Kies. Start Odin and try again later steps in my first message. Do not worry about the black phone screen. It is important that Odin saw the phone
he installed cf root kernel via Odin so drivers should be there right?
Sent from my GT-N7000 using xda premium
Gregs5 said:
You probably do not have the Samsung drivers installed on your computer.
Download Kies network and install the drivers off Kies. Start Odin and try again later steps in my first message. Do not worry about the black phone screen. It is important that Odin saw the phone
Click to expand...
Click to collapse
now i am updating Kies, and i guess will install drivers. You said Press vol down, power house 20 seconds, Vol up later....whats mean Vol up later ? sorry but need to ask steps....there is a hope
nokiamodeln91 said:
he installed cf root kernel via Odin so drivers should be there right?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes, installed via Odin cf root kernel
Yes same thing happened to me but i landed in a soft brick. It says erasing system and self restarts the phone after which i was stuck at samsung boot logo. I was on stock rom, rooted it, install hydracore kernel, flash cm10 then i flashed liquid smooth. But during flashing some symbol art appear with a message system erasing and then it restarted.
Sent from my GT-N7000 using xda app-developers app
#Greg5 , nothing happened, same thing, black dead display
now there seems to be scare options
1 usb jig
2 jtag
3 samsung service
Sent from my GT-N7000 using xda premium
U need a usb jig. That will definitely work.
Sent from my GT-N7000 using xda app-developers app
i see its something to cut cable, micro usb and resistors !?!?! uffff......
tanzemyu said:
i see its something to cut cable, micro usb and resistors !?!?! uffff......
Click to expand...
Click to collapse
yeah
Sent from my GT-N7000 using xda premium
need to buy resistors tomorrow, and to make this technological bullet....
So
I was using saurom v2.. everything was good when i decided to try ics.. i tried to instal tiramislim v2.. got problems rom never installed.
i downgraded back to gb jw4... rooted.. then tried the f4k ics rom...
failed to install it and now i can't even downgrade.. everytime i try my phone just stucks on odin or fails..
any idea?
sorry if its the wrong section, but i need help
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
i managed to make it jvu.. then went to make it jw4
now i can't even enter download mode.. screen stopped working or wtf..
Take out the battery for 1min.
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
after i made it jvu i wanted to make it jw4.. it was doing something else.. i forgot the names now.. and then the screen just went off
removed the battery many times but nothing. i am charging the phone in case it's the battery :/ i closed also odin when i saw it was doing nothing..
i think i did a serious damage on the phone. If it gets fixed i will try cm10.. right now.. nothing :/
I think Odin crashed my phone
because i changed 3-4 custom roms in some hours..
i saw some threads about how to put it back in recovery mode but nothing..
screen is black.. not responding at all : (
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
nothing at all..
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
so when the battery dies in the middle of flashing... i can't charge it?
Possibly not, you have to try with a fully charged battery before flashing anyway. I think if you touch the phone while on power and the battery is warm maybe is charging. If there is no sign of life or there is no heat at all maybe is not charging. You still have to try to enter download mode with a fully charged battery, keep trying.
Sent from my GT-I9000 using xda app-developers app
Any news? Luck?
Sent from my GT-I9000 using xda premium
i changed battery with external charger and tried putting it in download mode..
nothing though : /
i don't know what to do
You have to try the dowload mode using an USB jig.
http://forum.xda-developers.com/showthread.php?t=819551
You can't broke this mode by flashing your phone, if an USB Jig don't work, you really have an hardware problem.
my pc makes sounds when i connect the phone.. then the sound that it got dc'ed
i don't think i will find a jig here.. nor i can make one.
i will give it to samsung service center and pay them..
if it gets fixed
1 week and more without a phone lol
Where you're from..? If you're from holland i have a jig for you... if not you can order one from the internet i paid €3,75 for it
GT-I9001 4.1.2 JB by Invendor
same happened to me
i live in India i have the same problem tried repairing my phone but no result.....i gave it to a repairer he tried the riff box repair but nothing happened....and when i am charging the phone it doesn't heats.... if you get something done please update it on this thread, while i'm trying too
i guess i have to find a shop and buy a jig : P
you can order the jig on ebay... i got one for my phone... in continuation of the discussion going on, my phone is bricked as well... nothing is working... neither the 3 combo button or the JIG... also, when i plugin the charger, no indication is showing up... can anyone please suggest what can be done for this?
I checked with Samsung.. they have asked me to get the motherboard replaced and it will cost around 8K...
Hy friends.
Last month I flashed stock ROM. I rooted it and I installed cwm. Two weeks ago I did a factory reset from settings, and it doesn't boot. I can enter in cwm and in download mode, but my PC doesn't recognise it. I have drivers installed, Samsung kies etc, but it still doesn't recognize it.
Please, can someone help me?
Sent from my ST21i using xda app-developers app
That's mean your phone is not bricked. Try to reinstall the drivers. Go to download mode and enter it. Run Odin 3. It doesn't matter if Odin not detect it as GT-S6500 for example Odin detect it as T/(V) or any other random word. Click PDA and flash the stock rom or flash CWM.
I try to reinstall drivers, even on 3 computers, but it said that USB device was not recognized., so Odin can't see it.
Edit: I have cwm from gt s7500, can someone upload one for mini 2?
Sent from my ST21i using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2203410
http://forum.xda-developers.com/showthread.php?t=2156194
striker14 said:
Hy friends.
Last month I flashed stock ROM. I rooted it and I installed cwm. Two weeks ago I did a factory reset from settings, and it doesn't boot. I can enter in cwm and in download mode, but my PC doesn't recognise it. I have drivers installed, Samsung kies etc, but it still doesn't recognize it.
Please, can someone help me?
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
It's probably stupid idea, but did you try another USB cable, because I was in similar situation and after bunch of drivers installed on several computers i found that the problem was in the USB cable. Tried another USB cable and it worked like a charm. At least it worked for me.
I didn't try that, I will try it later, now I'm on a trip with my family and then I have just my tipo.
Sent from my ST21i using xda app-developers app
TheTrakO said:
It's probably stupid idea, but did you try another USB cable, because I was in similar situation and after bunch of drivers installed on several computers i found that the problem was in the USB cable. Tried another USB cable and it worked like a charm. At least it worked for me.
Click to expand...
Click to collapse
Tryed that, not working, now i'm trying to charge my phone
Sent from my ST21i using xda app-developers app
It may also seem stupid, but you could try Heimdall, an Odin-like software, that may recognise your device, or you could even make sure that when you install the drivers, you should right-click on the .exe file and run as administrator. It worked for me once.
I suggest you change usb ports or use another cable
Sent from my GT-S6500 using xda app-developers app
Already do that, three cables on 5 pc's
Sent from my ST21i using xda app-developers app
this is not a brick, i'm not sure what's the problem... did you install drivers?? did you try with odin 3.04 and 1.85?
Drivers are ok, my friend's mini 2 is recognized. Now phone won't boot (charged it for three hours)
Sent from my ST21i using xda app-developers app
Deleted
Unfortunately I have the same problem :| it is called Recovery-loop and I started to try to fix it about one month ago or more. Now i am trying to send a PM to @thewisp with the problem and for that I need 10 posts Did you asked him about this problem? He is the most active developer for this phone and he might know what we should do .
When I will fix it (i hope soon) i will tell you every step that i made so you will fix your phone too.
I was afraid of jumping to custom roms because of bricking my phone but after learning how to do it I didn't think it was possible to brick your phone. Well I guess it is.
As you probably have tried every trick there is, your best bet is if the dev knows how to solve it.
But if you can enter download mode and odin does not see the phone, and drivers and cable are ok, it will be hard to fix if possible.
you're right. There is really LOW chance of bricking your device by installing custom ROMs. If you develop customs ROMs, then it is easy to brick you device.
this bug is not called "recovery-loop". This has been fixed in the latest CWM builds for Mini 2, it's your own problem if you haven't upgraded yet.
Anyway, I had a similar problem once, odin just wouldn't recognize my device whatever I do.
This worked for Mini 2:
1 ) unplug USB cable
2 ) Power off device
3 ) Start it in download mode, press volume up button to continue. Do NOT plug in USB cable.
4 ) Open odin as administrator
5 ) Plug in USB cable
if this still doesn't work, try rebooting Windows and try again. Should work.
I think is hard brick, because phone won't charge now, it' s dead.
Thanks for all replay and thanks TheWhisp, but i don't know what i can do.
Sent from my ST21i using xda app-developers app
striker14 said:
I think is hard brick, because phone won't charge now, it' s dead.
Thanks for all replay and thanks TheWhisp, but i don't know what i can do.
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
Get the battery out, wait 1-2 minutes, press power button for 30 seconds (while the battery is out !) then put the battery in and try to start it in download mode (Vol - + Home + Power) ! Worked for my hard brick , the phone won't start not even when charger plugged...
CoX26 said:
Get the battery out, wait 1-2 minutes, press power button for 30 seconds (while the battery is out !) then put the battery in and try to start it in download mode (Vol - + Home + Power) ! Worked for my hard brick , the phone won't start not even when charger plugged...
Click to expand...
Click to collapse
Nope, it doesn't work, it's just dead
striker14 said:
Nope, it doesn't work, it's just dead
Click to expand...
Click to collapse
hey man try this method:
1. Battery out. 4secs or more. Battery in (Remove SIM card and SD Card to be saved)
2. Volume DOWN + Home + Power Button. Hold it EXACTLY 5 SECONDS!
(NOW YOU IN DOWNLOAD MOD)
3. You will see or hear nothing! but remember you are there!
4. After when you got in download mod if you remember you need to "Press Volume UP" to confirm it. So press Volume UP and wait 2 seconds
5. Connect your mobile to the PC (Desktop ODIN Running). You will hear the sound. Which mean your phone connected.
6. Flash any stock firmware as you like....
Good Luck!