Database Develop

Noob Question?

so I got a samsung galaxy s captivate SHG-I896 from rogers and I really want to root it, i have z4root installed, but im hesitating. because i dont want to brick my phone, i have had an apple device, jailbroke a bunch, no problems of brick but android is a whole different story, so i would appreciate a few pointers, sorry for posting such a noobish question

Not sure about the Rogers version, but with the 897, if anything goes wrong, ODIN will return it to factory.

I have the Rogers Captivate as well, I was a little hesitant before I did it too but myself and a bunch of my friends that have the phone have done it with no issues at all. Do the permanent root, if it freezes then just pull the battery, reboot and try again. It took me at least twice to root it but it's remarkably easy. If anything really major goes wrong you can always boot to recovery and wipe data but I seriously doubt you'll need to. I'm just speaking from experience so don't blame me if anything buggers it up but to be honest it's not as easy to brick it as you might think.
Just go for it.

just rooted it
i just rooted my captivate with z4root, can any one give me any like tips/warnings/shoulds/shouldnts

Should:
- Get Titanium Backup and batch backup everything. This app will make your life so much easier and hassle free.
- Also, just be careful and don't go crazy with installing stuff you don't know about. Do your due diligence before flashing anything or installing any app or lag fix. Figure out exactly how it's done before you do it. This might sound basic and common sense but from the short time I've been here I've seen a fair few people complain of bricking their phone just because they didn't follow directions that were pretty clear from the onset.
Enjoy!

how to flash
im looking around the forums so, i copied this from the darky rom post:
HOW TO FLASH
1. Place the ROM on the root of your SD card.
2. Backup your apps using Titanium Backup.
3. Open ROM Manager (Downloadable from the market)
4. Choose "Install ROM from SD card". If after you flash and you have problems like force closes and you can't receive calls, wipe data/cache.
5. Let the phone sit for 5-10 minutes after booting.
6. Have fun!
is that all u have to do? no holding buttons and booting into some menu?
also will these roms work for 2.1 rogers version captivate? Because i checked on the wiki for the captivate rogers version and it said something about "optionally change the model in the update-script from SGH-i897 to SGH-i896"

I'm not the best person to ask about this unfortunately but from what I've read this is definitely one way to flash a new rom. Whether you're currently on 2.1 seems to be irrelevant as the rom will act as your new version of Android as it were.
A few things I've read, make sure you have access to both recovery and download modes, if anything happens you'll probably need to flash back with Odin so learn more about that before you proceed.
Best to start here: http://forum.xda-developers.com/showthread.php?t=884364
And finish by reading the remaining stickies and make sure of any special instructions for whatever rom you want to install.
I haven't flashed because, and this sounds strange, I don't actually have access to a computer at my house so I can't use Odin as easily to fix any issues that might occur so I haven't tried yet.
I'll step out and let someone else handle your flashing questions.

If you read the Q&A sticky it would've answered your questions.

[Q] Help with stock Milestone 2.2.1 from Germany

Hi everyone,
I know this will make me sound like a complete noob but it doesnt matter. Any help or any pointing in the right direction would be greatly appreciated.
I have a stock motorola milestone 2.2.1. I hate it and have read how stable some of the roms are and I would love to experiment with them. However, never having a windows phone or an HTC before I have no idea how to do this with minimizing the risk.
So I have rooted my phone with universalandroot and have installed rom manager and titanium backup. Unfortunately, I read that rom manager wont work with the Milestone.
All of the threads on boot recovery and other methods seem to differentiate from one another. Is there a safeR method. I know no method is safe. What programs do I need to install on my computer and or my phone for this to work?
I know this a lot and I truly appreciate any help and support from this forum.
Thanks

Tompaine said:
Hi everyone,
I know this will make me sound like a complete noob but it doesnt matter. Any help or any pointing in the right direction would be greatly appreciated.
I have a stock motorola milestone 2.2.1. I hate it and have read how stable some of the roms are and I would love to experiment with them. However, never having a windows phone or an HTC before I have no idea how to do this with minimizing the risk.
So I have rooted my phone with universalandroot and have installed rom manager and titanium backup. Unfortunately, I read that rom manager wont work with the Milestone.
All of the threads on boot recovery and other methods seem to differentiate from one another. Is there a safeR method. I know no method is safe. What programs do I need to install on my computer and or my phone for this to work?
I know this a lot and I truly appreciate any help and support from this forum.
Thanks
Click to expand...
Click to collapse
First of all, ROM Manager does not work with the milestone. So please remove it and dont ever install Clockworkmod recovery on the milestone.
Second, What ROM do you want to install?
You need Androidiani Openrecovery for all your flashing needs of customs ROMS. You will need rsdlite to flash sbf files and offcourse the Moto usb drivers. Check the sticky threads in the development section. There are many tutorials.

This is easily one of the best ways to get everything done in the way of flashing a custom ROM.
http://forum.xda-developers.com/showthread.php?t=983516
Depending on which ROM you want to install, it will determine what you need to download.
After rooting the phone, you will want to flash a vulnerable recovery sbf via RSD Lite, as shown in that thread the VR you should use will depend on your bootloader version. If you are running 90.78, then you can flash this VR: http://android.doshaska.net/rootable
After that happens, you can create a backup of all of your apps using TitaniumBackup.
Once you do that you want to place OpenRecovery(AOR) on your SD Card. Follow the steps from the first link I posted to get that on. You will want to place the custom ROM that you want into OpenRecovery/updates. If you are planning on using CM7, you will also need to download google apps from the CM7 thread here.
Once that is on, you will want to boot into recovery(power+x, see the Moto M logo, then release and push camera button+volume up), apply update.zip.
From there you want to select the Nandroid menu with the d-pad. Create a nandroid backup of what you want.
Now is the crucial step. You need to wipe the caches and ALL data. Choose wipe dalvik cache, wipe cache partition and wipe data/factory reset.
Now is time to apply your custom ROM!
It is recommended to create a nandroid backup everytime you flash a custom ROM, in case of anything going wrong.
Navigate to apply update in AOR, select the ROM that you want, select yes. Once it is done installing, wipe the caches and data AGAIN.
If you are installing the google apps, you will want to wipe the caches, flash the google apps, then wipe the caches again.
You will probably have to apply the baseband for your carrier, so you will need to navigate to change baseband, and apply the baseband for your carrier.
If you followed those steps, you should have a brand spanking new custom ROM on your phone.
Hope this helps.

@skadude66
I just really want to thank you so much for helping me with that. Your tips and the link to the guide explained step by step what I had to do.
Right now I am running miui gingerbread on my phone and it runs and looks great. Thanks.

Tompaine said:
@skadude66
I just really want to thank you so much for helping me with that. Your tips and the link to the guide explained step by step what I had to do.
Right now I am running miui gingerbread on my phone and it runs and looks great. Thanks.
Click to expand...
Click to collapse
Glad to hear!
Sent from my Milestone using XDA Premium App

Bricked Tab???? HELP

HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks

geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..

pvtjoker42 said:
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..
Click to expand...
Click to collapse
Hi there, thanks for reply back to me.
I've managed to actually get it going again, by reflashing to the Overcome kernel.
However, some apps has disappeared and also the market.
Anyways, i wish to revert the whole thing back to stock, kernel and firmware. Is there a way I can do this via Kies?
Let me know what information regarding my tab you need. I believe it is the CPW (GSM) UK version.
cheers

geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).

LOL, +100000000000000000000000 thepitbull...

thepittbull said:
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).
Click to expand...
Click to collapse
Hi there,
Thank you so much for your time in replying - I've managed to install what i believe is stock Gingerbread from Samsfirmware. So everything looks back to normal... tho i have posted another Question, with all my firmware details so I can be reassured I am back to stock.
So sorry, I panicked so badly last night..ha!

You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.

nidza said:
You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.
Click to expand...
Click to collapse
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk

k0sh said:
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App

geoyakult said:
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
best reaction i never read

[Q] Flashing ICS/JB on an XXJVU i9000?

Hello guys, it's me (nay, not Mario :laugh again. Another question.
Got a new battery which seems to hold charge well so I thought I might flash something in the likes of CM9 or CM10(.1).
I'm starting this thread because I would like to be totally sure what should I do (although I know I will never be 100% sure I'm doing it right). The reason I'm starting this thread is fear from bricking my phone (now troll me).
A little background (might be TLTR so freely skip it):
A year or so ago, I had a LG GT540 in my possession. Spoiled by the painlessness (is this a word?) of flashing Huaweis I fearlessly dared to flash fastboot on it in order to flash custom ROMs and stuff. The installation instructions seemed dead simple. Battery was full. Followed the procedure from letter to letter. Despite the fact that I followed the whole tutorial, in the end I got a hard brick. One hour later I thought it ought to be either finished or terminated due to an error of some kind. But no. It just stuck. Unplugged it and tried to turn it on. Fail, bootloop. Tried to reflash it, in all the modes I knew of. There were two or so modes: emergency and some über-emergency mode thingy. Fail. Then I tried with the official LG update tool. Final fail. That was the worst idea one could ever get, it got hard bricked, with no signs of life at all. RIP.
Back to the question.
As a proof that I used that damned search feature (at least tried to) here goes the procedure as I've understood it (while searching):
do a Nandroid and TB backup (optional, but you might really regret it if you don't do so)
back up your EFS folder
wipe data/factory reset
flash the ROM thru recovery
reboot
if it bootloops, reboot to recovery manually
flash the ROM again to finalize the procedure
eventually flash GApps
So,
did I leave out something?
what's the most reliable procedure/app to backup EFS?
is there a way to verify if EFS is properly backed up?
what's the proper, ahem, primer ROM to flash first and make stuff glue together nicely?
Semaphore's recovery tends to blink when browsing through using the capacitive menu button instead of volume buttons, is that a problem?
is Semaphore's recovery itself, regardless of the before mentioned issue, appropriate for flashing ICS/JB (or should I flash some other kernel/recovery before flashing)?
will I survive on XDA with that much questions at once?
It's SIM unlocked (don't know how, second hand phone, most likely with Helroz's unlock application), other details are in the signature.
Thanks in advance!
EDIT: See last post (#7 if the discussion goes on) for more details and answers to my questions.

http://www.youtube.com/watch?v=2DLySUtI8vo
http://www.youtube.com/watch?v=iRnH13sRAIc
http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://www.youtube.com/watch?v=PwHVm90HO1w
check out these and you wont brick your phone happy flashing

I have already flashed a rooted kernel with CWM (CF-Root and later Semaphore).
Please, I know my English ain't perfect, but try to skim through my post. At least the second half of it.

your english is fine i read your post all of it i was just giving you a bit of direction incase you soft bricked your sgs,and as for what the best rom is they are all good roms the devs spend alot of time developing them its just a matter of what set up you like so try them all till you find one you like darkyrom v11 ,is pretty smooth its ics and stable cm 9 is good also ,remics jb 4.2.2 is good also .sgs i9000 is almost impossible to brick just read or watch the info two or three times just to be sure goodluck

TIGER 123 said:
your english is fine
Click to expand...
Click to collapse
Aw, thank you! Sorry for me being kinda needlessly rude.
TIGER 123 said:
and as for what the best rom is they are all good roms the devs spend alot of time developing them its just a matter of what set up you like so try them all till you find one you like darkyrom v11 ,is pretty smooth its ics and stable cm 9 is good also ,remics jb 4.2.2 is good also .
Click to expand...
Click to collapse
You meant this?
moorkai said:
what's the proper, ahem, primer ROM to flash first and make stuff glue together nicely?
Click to expand...
Click to collapse
In fact I wanted to know (along with the doubts from post #1) what do I need to flash prior to playing with ICS and/or JB because I thought that there are some ROMs (e.g. CM9) that do the necessary repartition process(es) as there are some partition layout differences between stock Gingerbread and the newer ICS and JB ROMs... and that failing to do so might lead to soft/hard bricks.
I know that asking questions like "What's the best ROM for my phone?" might lead to subjective and conflicting answers as some prefer lightweightness over functionality and vice versa, thus I don't prefer to do so, neither I did so in my first post. Sorry if you understood me otherwise.
Hope that I made some things more understandable now.

Okay, solved this doubt:
moorkai said:
what's the most reliable procedure/app to backup EFS? Tar zcvf contents of the /efs folder in terminal.
Click to expand...
Click to collapse
However, in one of the videos you posted here CWM 2.5.1.2 was used and thus it additionally stresses the following question:
moorkai said:
is Semaphore's recovery itself, regardless of the before mentioned issue, appropriate for flashing ICS/JB (or should I flash some other kernel/recovery before flashing)?
Click to expand...
Click to collapse
Help me!

I finally dared to flash CM10.1! Everything went silky smooth. Here are my conclusions for further reference (maybe someone can find them useful). These might be inaccurate, but I didn't brick my phone. After all, don't hesitate to correct me if I'm wrong.
How I flashed CM10.1:
do a Nandroid and TB backup (optional, but you might really regret it if you don't do so)
back up your EFS folder
wipe data/factory reset, wipe cache partition, advanced > wipe dalvik cache
flash the ROM through recovery (install zip from sdcard > choose zip from sdcard)
now it will reboot and finalize the flashing if everything is OK
eventually flash GApps
Questions from the first post and ...answers:
Q: Did I leave out something?
A: Most likely, not.
Q: What's the most reliable procedure/app to backup EFS?
A: Type the following stuff in Terminal Emulator or adb shell (root privileges necessary):
Code:
su
tar zcvf /sdcard/efs-backup.tar.gz /efs
# some users suggest that backing this up can also help if IMEI goes belly up
cat /dev/block/stl3 > /sdcard/efs_dev-block-stl3.img
Q: Is there a way to verify if EFS is properly backed up?
A: Dual File Manager is quite useful for testing archive integrity.
Q: What's the proper, ahem, primer ROM to flash first and make stuff glue together nicely?
A: CM10.1, I guess.
Q: Semaphore's recovery tends to blink when browsing through using the capacitive menu button instead of volume buttons, does that mean it will cause ROM installation to fail?
A: I don't know, maybe, so flash CM10.1 with CF-Root kernel installed instead.
Q: Is Semaphore's recovery itself, regardless of the before mentioned
issue, appropriate for flashing ICS/JB (or should I flash some other kernel/recovery before flashing)?
A: See previous answer.

Updating a Galaxy note (bought secondhand)

Bought a second hand Note. It's rooted as CWM on it. It won't update OTA (no updates showing at all for the past couple of days), and it's on 2.3.6.
Can I manually install an update via Odin? If so which one?
Direct links would help, I'm a bit of a noob
U.K Note btw

JccageX2 said:
Bought a second hand Note. It's rooted as CWM on it. It won't update OTA (no updates showing at all for the past couple of days), and it's on 2.3.6.
Can I manually install an update via Odin? If so which one?
Direct links would help, I'm a bit of a noob
U.K Note btw
Click to expand...
Click to collapse
Being a 'noob' isn't an excuse for not looking. Go to the stock ROM sticky thread and try actually looking next time.
It's always so much harder when you have to try (David Gray).

JccageX2 said:
Bought a second hand Note. It's rooted as CWM on it. It won't update OTA (no updates showing at all for the past couple of days), and it's on 2.3.6.
Can I manually install an update via Odin? If so which one?
Direct links would help, I'm a bit of a noob
U.K Note btw
Click to expand...
Click to collapse
instruction sent
check your PM

AndroidSlave said:
Being a 'noob' isn't an excuse for not looking. Go to the stock ROM sticky thread and try actually looking next time.
It's always so much harder when you have to try (David Gray).
Click to expand...
Click to collapse
Typical "Omfg do it yourself guy". Here's an idea, stop being such an ass, I evidently looked as I know what Odin is, I wanted to be sure from a member who knows what he's doing just in case I did something wrong. Imbecile.
Thank you Comscier, downloading all the stuff now

JccageX2 said:
Typical "Omfg do it yourself guy". Here's an idea, stop being such an ass, I evidently looked as I know what Odin is, I wanted to be sure from a member who knows what he's doing just in case I did something wrong. Imbecile.
Thank you Comscier, downloading all the stuff now
Click to expand...
Click to collapse
No here's a better idea - stop being a lazy
If you want someone to do it all for you, there are websites you can pay to root your phone. XDA is NOT that place.
There are threads already for this but you are just to lazy to lift two fingers to look
So you call me an ass? Okay buddy I'm an ass because your too lazy to read the guide that someone spent hours making that is at the very top of the forum as a sticky note in capital letters.
And yet with 152 posts you still refuse to just look at the guides that are step by step instructions because you expect to be spoon fed
Let's look at your other threads "which rom is best" "how to root my desire" and so on
Its not like you even try to look. You just over and over break xda policy and are lazy. Get with the picture and follow the rules
No reason to call me an ass, I am actually a very useful and helpful person to many people on this website. But everyone is expected to at least TRY to look before posting, which you consistently refuse to do (as your previous threads for other devices proves)

AndroidSlave said:
No here's a better idea - stop being a lazy
If you want someone to do it all for you, there are websites you can pay to root your phone. XDA is NOT that place.
There are threads already for this but you are just to lazy to lift two fingers to look
So you call me an ass? Okay buddy I'm an ass because your too lazy to read the guide that someone spent hours making that is at the very top of the forum as a sticky note in capital letters.
And yet with 152 posts you still refuse to just look at the guides that are step by step instructions because you expect to be spoon fed
Let's look at your other threads "which rom is best" "how to root my desire" and so on
Its not like you even try to look. You just over and over break xda policy and are lazy. Get with the picture and follow the rules
No reason to call me an ass, I am actually a very useful and helpful person to many people on this website. But everyone is expected to at least TRY to look before posting, which you consistently refuse to do (as your previous threads for other devices proves)
Click to expand...
Click to collapse
Never said you weren't a useful guy. However you for some reason insist I didn;t look beforehand. I made a thread to make sure I didn't mess up my phone, I didn't know if I could flash stock firmware over a root + recovery or not.
So before you attack members in their first post with a new phone, I'd suggest you'd think twice.
I appreciate your work. Bye.

JccageX2 said:
Never said you weren't a useful guy. However you for some reason insist I didn;t look beforehand. I made a thread to make sure I didn't mess up my phone, I didn't know if I could flash stock firmware over a root + recovery or not.
So before you attack members in their first post with a new phone, I'd suggest you'd think twice.
I appreciate your work. Bye.
Click to expand...
Click to collapse
My only thing I want to say is next time say what you read. Otherwise it looks like you have done nothing and are just posting out of laziness. There was no way I could have known you did any due diligence with your post aside from a mention of Odin.
I am going to link you to a very detailed post I wrote about upgrading from gingerbread. This post I wrote will guide you.
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
---------- Post added at 11:10 PM ---------- Previous post was at 11:06 PM ----------
Here is my post from the philz thread. Let Mr know if u have questions. Please also be SURE to read the brickbug sticky thread
TO ANYONE READING THIS POST - NOTE THAT THIS IS ALL SPECIFIC TO UOGRADING FROM GINGERBREAD ONLY
@onetonnoodle Honestly, if you like the features of Sweet Rom, it is an Amazing rom (maybe the best?), but I personally (when I use touchwizz interface) prefer a stock interface, which is why I like @ThaiDai's stock-deodexed LT9. If you were thinking of sweet rom, just go with it. It really is spectacular and constantly updated. Just be aware you may issue a couple bugs here and there because it is in constant development, but they always get fixed right away.
Regarding hardbricking, as long as your only doing wipes while PhilZ kernel is installed, you are safe. Remember anytime a new rom is flashed it overwrites the kernel with whatever is packaged with that rom. Also any gingerbread kernel philz or not are safe. Be very careful if on an ICS ROM though.
There are 3 ways that I would do it. Obviously, there are about 100 ways to do this. These are the methods I may use
IF ITS GINGERBREAD COMPATIBLE (I dont remember), the Mobile Odin Pro method is by far the easiest way
Here is one Method (easier, but only if u have pc odin setup):
1. Flash Sweetrom via PC odin
2. it wont boot because of all your old gingerbread data. After turning it on, immediately boot to recovery. Do a factory reset, or if you want a completely clean install do a full wipe and then reflash sweetrom again via recovery.
3. reboot to system
4. YOU WILL HAVE A YELLOW TRIANGLE. Use Triangle Away from XDA (its free) to remove that, but this does have a risk.
Mobile Odin Method this would be my first choice so long as your GB rom is rooted
I think mobile odin is compatible with gingerbread. You will have to download sweet rom to your phone.
If it is, you can use mobile odin to flash the sweetrom zip, you are already on gingerbread so you are brickbug safe...
If mobile odin is gingerbread compatible, which i believe it is, this is really a simple method.
Obviously your gingerbread ROM has to be rooted if you want to do this.
NOTE: you will get issues because mobile odin doesnt really do a full wipe. if hte issues do arise you can reboot to recovery included with sweet rom and just do a factory reset and you will be fine.
Here is yet another method to update:
1. Open the browser ON YOUR PHONE. *(a) Download SweetRom to the sdcard (internal or external); (b) Download the newest LT9 Philz kernel to your sdcard also.
* **Note: if you have issues getting the download to complete, try opera mini browser because it supports resume downloads.
2. [OPTIONAL STEP, not required] Flash Abyss 4.2 kernel, and do a full nandroid backup in recovery... * I personally would skip this step. *I dont even know if you could find abyss anymore, but I am making an option for you to get a nandroid backup of your gingerbread rom that will boot... *really though, dont waste your time on this unless you want to assure you have a full backup of gingerbread with a gingerbread kernel
3. *Unfortunately, you can't flash philz directly from your 3e recovery (because you are on gingerbread)... it will give a signature verification error. *so you can either flash it via PC odin, or do an OTA upgrade and then flash it (be careful, once you do this you are not brickbug safe).
4. Flash PhilZ LT9 Kernel from either Abyss if you did step 2 (optional), from your stock android recovery if you can put it on your external sd card *only if you did an OTA update , or via PC Odin if you dont have an external SD Card. *Be sure to follow the philz flashing instructions step by step.
5. NOW YOUR PHONE WILL NOT BOOT. dont be alarmed, you only want to go to recovery. *You will have no issue getting into recovery as long as philz flashed properly. *Your phone now has a JB kernel with a GB system, this is why it won't boot.
6. boot recovery (power - volume up - home held until you get to philz touch interface)
7. Go to factory reset, and choose the wipe all option (this wipes /system /data /cache /preload and .android_secure). *Your phone now has no system, but will retain the philz kernel and touch recovery.
8. no need to reboot recovery. *Just go to flash the Sweet ROM Zip. *let it run.*
9. reboot to system
10. Done. *it will already include the kernel.
If you are confused about any step, dont even start the process. ask first.
And be aware, there is always a risk doing this. It won't brick your phone, but you may softbrick it and lose recovery if something goes wrong. The solution for this is to use PC Odin and flash a ROM via PC Odin.

Thanks.