Database Develop

[Q] Alfs v8 Black Screen :(

Hi, I have installed new alfs v8 .. On startup I can see alfs logo but then it changes to black screen... but it isn't off ;/ I'm searching help everywhere but no one answers me Idk if I'm writing in right section.. I havee my log of flashtool instalation :
Spoiler
28/010/2012 22:10:04 - INFO - <- This level is successfully initialized
28/010/2012 22:10:04 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
28/010/2012 22:10:04 - INFO - You can drag and drop ftf files here to start flashing them
28/010/2012 22:10:17 - INFO - Device disconnected
28/011/2012 22:11:39 - INFO - Selected X8_v08a-cm7_Alfs&djnilse.ftf
28/011/2012 22:11:39 - INFO - Preparing files for flashing
28/011/2012 22:11:40 - INFO - Please connect your device into flashmode.
28/012/2012 22:12:02 - INFO - Device connected in flash mode
28/012/2012 22:12:02 - INFO - Opening device for R/W
28/012/2012 22:12:02 - INFO - Reading device information
28/012/2012 22:12:02 - INFO - Phone ready for flashmode operations.
28/012/2012 22:12:02 - INFO - Start Flashing
28/012/2012 22:12:02 - INFO - Flashing loader
28/012/2012 22:12:04 - INFO - Loader : S1_Loader_Root_8e35 - Version : r4A060 / Bootloader status : ROOTED
28/012/2012 22:12:04 - INFO - Flashing kernel.sin
28/012/2012 22:12:08 - INFO - Ending flash session
28/012/2012 22:12:08 - INFO - Flashing finished.
28/012/2012 22:12:08 - INFO - Please wait. Phone will reboot
28/012/2012 22:12:08 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
28/012/2012 22:12:08 - INFO - Device connected in flash mode
28/012/2012 22:12:10 - INFO - Device disconnected
28/012/2012 22:12:12 - INFO - Device connected in flash mode
28/012/2012 22:12:30 - INFO - Device disconnected
28/012/2012 22:12:33 - ERROR - Drivers need to be installed for connected device.
28/012/2012 22:12:33 - ERROR - You can find them in the drivers folder of Flashtool.
28/012/2012 22:12:39 - INFO - Device connected with USB debugging off
28/012/2012 22:12:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
28/013/2012 22:13:16 - INFO - Device disconnected
It says I need drivers but I have it -.- .. and USB debugging is off so I don't know what I'm doing wrong.. :/ I have Android 2.1 and wanted change to GDX but now I can't turn on phone and Idk why.. :-( So.. Do You know what I'm doing wrong?? Sorry for english.

it wont boot since u r trying to run stock rom with custom kernel, which is not supported...
did u try entering recovery? Keep pressing back button, and then install gingerdx from ur memory card...

Hm... Logo of GDX is looping :// That's not good.. :< I heard about it. But don't know what to do.
//EDIT
awwww yeahhh.... I have installed X8_v08a-cm7_Alfs_djnilse... I need to install X8_08a-GDX-no_fps_cap_Alfs_Djnilse ? Damn... So... If I can't succesfully turn on the phone, I can't add Alfs for GDX.. so I need to install CM7 ROM, then add files and install GDX ????

X8_v08a-cm7_Alfs&djnilse.ftf is ONLY for MiniCM7 (Like MiniCM7 2.2.0). For GingerDX You should flash X8_08-GDX_Alfs&Djnils.rar
That's why it doesn't boot

Okay... I get it... Nevermind to EDIT in last post ;D Thank youu everybody, I will install again and tell if It works or not
Ehh... It's bootlooping yet... I have installed Alfs fo GDX..

Do full wipe or install ROM again

It's weird. I have reinstalled GDX v025 and I returned to stock kernel and GDX logo is looping once and then logo is freezing :/ ;(((( I don't get it ;D
What the... hahaha Installed v022 and works ;D What sorcery is thiss?! ;D

Flash kernel -----> after that ALWAYS do a full wipe ---> install ROM.
If You have compatible kernel and change just a ROM:
do a full wipe ----> install ROM.

Okayy...... I don't know what I have done but it works !!! Yeah I'm very happy Thank You sooo muuchh ! )) Youu are the best ! D
//EDIT
I have new problem.. but nevermind.. It's with USB. My SD card is unplugging when I'm connecting phone with computer...

Change camputer

Problem with install kernel nAa-ics-03

I have problem with install kernel nAa-ics-03
Log from flashtool:
27/048/2012 16:48:30 - INFO - <- This level is successfully initialized
27/048/2012 16:48:30 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
27/048/2012 16:48:30 - INFO - You can drag and drop ftf files here to start flashing them
27/048/2012 16:48:38 - INFO - Device disconnected
27/048/2012 16:48:38 - INFO - Selected E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf
27/048/2012 16:48:38 - INFO - Preparing files for flashing
27/048/2012 16:48:39 - INFO - Please connect your device into flashmode.
27/048/2012 16:48:48 - INFO - Device connected in flash mode
27/048/2012 16:48:49 - INFO - Opening device for R/W
27/048/2012 16:48:49 - INFO - Reading device information
27/048/2012 16:48:49 - INFO - Phone ready for flashmode operations.
27/048/2012 16:48:49 - INFO - Start Flashing
27/048/2012 16:48:49 - INFO - Flashing loader
27/048/2012 16:48:51 - INFO - Loader : S1_Loader_Root_8e35 - Version : r4A060 / Bootloader status : ROOTED / IMEI :
27/048/2012 16:48:51 - INFO - Flashing kernel.sin
27/048/2012 16:48:53 - INFO - Ending flash session
27/048/2012 16:48:53 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_ STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
nAa-11 kernel installed well, but i can't install nAa-ics-03.
Who can help me ?

Download kernel again
Sent from my E15i using XDA

Re-download the tft from the official nAa thread and try re-flash.

Can anybody help me?
I don't know what's wrong.
I dowloaded again kernel from official thread, but problem has arrived.
I downloaded latest flashtool version 8.0.

Maybe use the flashtool given in MiniCm thread...
Hit thanx if i helped..

i had the same problem while flashing
i downloaded the kernel once again and it worked
i think probably you should try changing the flashtool version or try to flash with diffrent usb mine was too old and the usb ports were also too lose so tried with my other usb and it worked
just a suggestion

i had same problem and i installed stock kernel and then again ics and the 3rd time worked

[Q] INFO - Cannot open bundle. Flash operation canceled

Trying to upgrade to http://forum.xda-developers.com/showthread.php?t=2687443
Android 4.4 Kitkat. Phone already rooted and process done before twice no problems.
Cant flash eft.. I am pulling my hair out over this. Please help!
25/009/2014 07:09:43 - INFO - <- This level is successfully initialized
25/009/2014 07:09:43 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/009/2014 07:09:51 - INFO - Device disconnected
25/010/2014 07:10:02 - INFO - Device connected in flash mode
25/010/2014 07:10:16 - INFO - Selected C6903 / 14.3.A.0.681 / Customized_FR
25/010/2014 07:10:16 - INFO - Preparing files for flashing
25/010/2014 07:10:17 - ERROR - 1
25/010/2014 07:10:17 - INFO - Cannot open bundle. Flash operation canceled

solrazr said:
Trying to upgrade to http://forum.xda-developers.com/showthread.php?t=2687443
Android 4.4 Kitkat. Phone already rooted and process done before twice no problems.
Cant flash eft.. I am pulling my hair out over this. Please help!
25/009/2014 07:09:43 - INFO - <- This level is successfully initialized
25/009/2014 07:09:43 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/009/2014 07:09:51 - INFO - Device disconnected
25/010/2014 07:10:02 - INFO - Device connected in flash mode
25/010/2014 07:10:16 - INFO - Selected C6903 / 14.3.A.0.681 / Customized_FR
25/010/2014 07:10:16 - INFO - Preparing files for flashing
25/010/2014 07:10:17 - ERROR - 1
25/010/2014 07:10:17 - INFO - Cannot open bundle. Flash operation canceled
Click to expand...
Click to collapse
Use the newest Flashtool Version 0.9.15.0

harfot said:
Use the newest Flashtool Version 0.9.15.0
Click to expand...
Click to collapse
Ill give it a try and update in a few.

solrazr said:
Ill give it a try and update in a few.
Click to expand...
Click to collapse
Updating your flashtool to the latest version should fix the problem :highfive:
I've faced that problem before

Yep that did the trick. Thank both of you. I cant post on the original thread I linked, but I was going to reply to him to update his info on making sure every1 uses the latest flashtool so others don't have the same issue, but I can't post a reply there, (guessing because Im new to posting, even though I been on this forum awhile.)
Many Thanks.

dear friend i have the same problem. however i have found the solution on my own risk! i would like to share the solution that worked for me and i am sure that will work for you as well. just go to C:\Users\Milan\.flashTool\firmwares there you will find some files or folders. just delete them. after deleting those files, just switch off your phone(without connecting USB cable to it) then hold volume down button and same time connect usb cable. flashtool shows that you have connected your phone in flashmode. thats it! leave your phone aside and select the file you wish to flash. relax! everything will be done automatically.
furthemore, it may take some time to see your phone in home screen so just wait for 5minutes. then you will see that you have successfully flashed your firmware. for more, write to me @ [email protected]

24/025/2015 11:25:48 - INFO - Device connected in flash mode
24/026/2015 11:26:13 - INFO - Selected Bundle for Shakira E15. FW release : 2.6.32.63-XPerience-KK06. Customization : XPerience-06
24/026/2015 11:26:13 - INFO - Preparing files for flashing
24/026/2015 11:26:13 - ERROR - ./firmwares/prepared/kernel.sin (No such file or directory)
24/026/2015 11:26:13 - INFO - Cannot open bundle. Flash operation canceled
how do we solve this
??????

sadhuu said:
24/025/2015 11:25:48 - INFO - Device connected in flash mode
24/026/2015 11:26:13 - INFO - Selected Bundle for Shakira E15. FW release : 2.6.32.63-XPerience-KK06. Customization : XPerience-06
24/026/2015 11:26:13 - INFO - Preparing files for flashing
24/026/2015 11:26:13 - ERROR - ./firmwares/prepared/kernel.sin (No such file or directory)
24/026/2015 11:26:13 - INFO - Cannot open bundle. Flash operation canceled
how do we solve this
??????
Click to expand...
Click to collapse
Just Go to ./firmwares/prepared/ this folder remove all files.go back again to flashtool select file again for flash wait few mints until flashtool asks u for connect a phone in flash mode.you are done
it,s happen sometime when ftf file did,nt extract by flashtool properly.

20/050/2017 11:50:26 - INFO - Preparing files for flashing
20/050/2017 11:50:26 - ERROR - null
20/050/2017 11:50:26 - INFO - Cannot open bundle. Flash operation canceled
как мне решить эту проблему?

Sony xperia me dual d2302 I was installed Expedia z3style custom ROM now I want to reflash my official firmware when I want to flash .Flash tool says
ERROR : Cannot open bundle flashing process canceled

Had the same error during my attempts to flash Xperia SO-02K firmware which I needed to flash for DRM keys backup. Tried Flashtool v0.9.18.6 and v0.9.15 for windows, both were able to read it, but threw "root : this bundle is not valid" and "Cannot open bundle. Flash operation canceled" errors during flashing (v0.9.34 and v0.9.28 didn't even recognize the firmware). Tried four different versions of the firmware and ultimately used newflasher v20 instead (latest version failed).

[HELP]Problem in flashing Xperia zr LP 5.0.2 FW with flashtool

I downloaded the XperiaZR LP FW 10.6..A.454 indian variant .ftf file and I'm trying to flash this ftf file (LP FW) with flashtool on my phone but the error occurs as "ERROR - Processing of loader.sin finished with errors."
i googled the solutions for it i got two solutions as
1. install the drivers. &
2. update the latest version of flash tool.
after installing the drivers and updating flash tool v 0.9.18.6 ,I again tried to flash (.454 ftf ) my phone but the error is same
and i can flash kitkat firmware i.e. .283 ftf file with it.....and even i flashed 4.2.2 it worked.....the problem is only when i flash the phone with lollipop firmware.
Here are my flash tool logs:
24/040/2015 15:40:02 - INFO - Flashtool Version 0.9.18.6 built on 30-05-2015 22:30:00
24/040/2015 15:40:02 - INFO - Executing search strategies to find proxy selector
24/040/2015 15:40:03 - INFO - No proxy found for IE. Trying next one
24/040/2015 15:40:03 - INFO - No proxy found for firefox. Trying next one
24/040/2015 15:40:03 - INFO - No proxy found for java. Trying next one
24/040/2015 15:40:03 - INFO - Syncing devices from github
24/040/2015 15:40:03 - INFO - Scanning devices folder for changes.
24/040/2015 15:40:03 - INFO - Pulling changes from github.
24/040/2015 15:40:03 - ERROR - Cannot sync devices : https://github.com/Androxyde/devices.git: cannot open git-upload-pack
24/040/2015 15:40:08 - INFO - Device disconnected
24/040/2015 15:40:23 - INFO - Selected Bundle for C5502. FW release : 10.6.A.0.454. Customization : Customized_IN
24/040/2015 15:40:23 - INFO - Preparing files for flashing
24/041/2015 15:41:48 - INFO - Please connect your device into flashmode.
24/042/2015 15:42:34 - INFO - Device connected in flash mode
24/042/2015 15:42:35 - INFO - Opening device for R/W
24/042/2015 15:42:35 - INFO - Start Flashing
24/042/2015 15:42:35 - INFO - Processing loader.sin
24/042/2015 15:42:35 - INFO - Checking header
24/042/2015 15:42:35 - ERROR - Processing of loader.sin finished with errors.
24/042/2015 15:42:35 - INFO - Ending flash session
24/042/2015 15:42:35 - ERROR -
24/042/2015 15:42:35 - ERROR - Error flashing. Aborted
24/042/2015 15:42:36 - INFO - Device connected in flash mode
24/042/2015 15:42:51 - INFO - Device disconnected
Whats the problem plz help me....!!!

Use Sony PCC to build the ftf with flashtool. Or makes sure the check sum is correct from where ever you got your ftf
Sent from my VGN-NS10J_S using Tapatalk

Use flashtool version 0.9.13.0 for ZR
install driver version 1.5 for lagan board, fastboot drivers and flashmode drivers

ecksdeeay said:
Use Sony PCC to build the ftf with flashtool. Or makes sure the check sum is correct from where ever you got your ftf
Sent from my VGN-NS10J_S using Tapatalk
Click to expand...
Click to collapse
sourabhp said:
Use flashtool version 0.9.13.0 for ZR
install driver version 1.5 for lagan board, fastboot drivers and flashmode drivers
Click to expand...
Click to collapse
guys thankx for your help..
The trouble is solved now....absurdly it was due to the incorrect time in my computer ...i didn't ever thought that time could cause this much problem...:silly:
actually the flash tool was not able to sync devices at startup which was causing problem...after syncing it works fine...
hope if anybody get this.... he can shoot the trouble now....by going across this thread

help please!

I installed a rom kitkat on my xperia sp, he's with bootloader locked, (LBL), I would like to know the step-by-step procedure to re-stock ROM, or if there is any way to unlock the bootloader on this version to install the UBL lollipop if possible also the pass-by-step?
They write in a simple way because I speak Portuguese-BR, and I do not quite understand.
I used the google translator excuses!​

gabriel2mm said:
I installed a rom kitkat on my xperia sp, he's with bootloader locked, (LBL), I would like to know the step-by-step procedure to re-stock ROM, or if there is any way to unlock the bootloader on this version to install the UBL lollipop if possible also the pass-by-step?
They write in a simple way because I speak Portuguese-BR, and I do not quite understand.
I used the google translator excuses!​
Click to expand...
Click to collapse
You can go back to stock rom using Flashtool
How to use flashtool : http://forum.xda-developers.com/showthread.php?t=2658952
How to unlock bootloader : http://forum.xda-developers.com/showthread.php?t=2354721
Use TWRP to flash a Lollipop rom ,other instructions are the same :good:

$Moses said:
You can go back to stock rom using Flashtool
How to use flashtool : http://forum.xda-developers.com/showthread.php?t=2658952
How to unlock bootloader : http://forum.xda-developers.com/showthread.php?t=2354721
Use TWRP to flash a Lollipop rom ,other instructions are the same :good:
Click to expand...
Click to collapse
guy I followed all the steps that you gave me, but the first step to go back to stock rom I found the following error .:
Code:
26/030/2015 19:30:23 - INFO - Flashtool Version 0.9.19.8 built on 24-09-2015 22:00:00
26/030/2015 19:30:23 - INFO - Executing search strategies to find proxy selector
26/030/2015 19:30:24 - INFO - No proxy found for IE. Trying next one
26/030/2015 19:30:24 - INFO - Strategy firefox failed trying next one : No Firefox installation found
26/030/2015 19:30:25 - INFO - No proxy found for java. Trying next one
26/030/2015 19:30:25 - INFO - Syncing devices from github
26/030/2015 19:30:26 - INFO - Scanning devices folder for changes.
26/030/2015 19:30:58 - INFO - Changes have been found. Doing a hard reset (removing user modifications).
26/031/2015 19:31:00 - INFO - Pulling changes from github.
26/031/2015 19:31:02 - INFO - Devices sync finished.
26/031/2015 19:31:09 - INFO - Device disconnected
26/031/2015 19:31:49 - INFO - Selected Bundle for Sony Xperia SP (C5303). FW release : 12.1.A.1.201. Customization : GENERIC BR
26/031/2015 19:31:49 - INFO - Preparing files for flashing
26/034/2015 19:34:45 - INFO - Please connect your device into flashmode.
26/035/2015 19:35:00 - INFO - Device connected in flash mode
26/035/2015 19:35:00 - INFO - Opening device for R/W
26/035/2015 19:35:01 - INFO - Start Flashing
26/035/2015 19:35:01 - INFO - Processing loader.sin
26/035/2015 19:35:01 - INFO - Checking header
26/035/2015 19:35:01 - ERROR - Processing of loader.sin finished with errors.
26/035/2015 19:35:01 - INFO - Ending flash session
26/035/2015 19:35:01 - ERROR -
26/035/2015 19:35:01 - ERROR - Error flashing. Aborted
26/035/2015 19:35:04 - INFO - Device connected in flash mode
help me, what do I do now?

Make sure to install the correct drivers and uncheck the reset factory in the flashing process

did you install the appropriate drivers which can be seen in the drivers folder within the flashtool folder in c drive? There u must install 3 of them (Flashmode Drivers, Fastboot Drivers, Common drivers Viskan board)