[Q] Contacts Screen Lag!! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Dear All,
I have Note 2.3.6 stock rom rooted
I started with 2.3.6 KK2 stock rom with root without any lag on contacts screen, then I updated my phone by flashing LA1 stock rom also with no lag problem or battery, but when I flashed CF-Root-SGN_XX_OXA_LA1-v5.0-CWM5 for root with CWM, I noticed the battery consumption is higher (but still ok, or is there a better one?) and the most annoying thing is the contacts screen lag: when I push the contacts icon it lags for exactly 8 seconds to show the contacts
my question is this lag came from the flashed file or not?
Can I flash the original kernel from KK2 stock rom? there were no lag and the battery consumption was perfect
is there any solution 4 that? if u have one then please explain to me why (this solution) and how to do it

I'd try flashing Franco's kernel if I were you. It's fast, stable and very easy on the battery. It is flashed from CWM Recovery, a piece of cake.
I'm using it as a combo on several Roms, and all of them spring contacts almost instantaneously.
Of course, you can always re-flash CF-Root if you don't like it.

thank you chasmodo for your reply,
Does your Franco Kernel will effect the root and the CWM or not?
my question is this lag came from the flashed file or not?
Can I flash the original kernel from KK2 stock rom? there were no lag and the battery consumption was perfect

thermax04 said:
thank you chasmodo for your reply,
Does your Franco Kernel will effect the root and the CWM or not?
my question is this lag came from the flashed file or not?
Can I flash the original kernel from KK2 stock rom? there were no lag and the battery consumption was perfect
Click to expand...
Click to collapse
Franco kernel will not affect your root and CWM in any way. However, flashing stock kernel or Rom will result in losing your root for sure.

chasmodo said:
Franco kernel will not affect your root and CWM in any way. However, flashing stock kernel or Rom will result in losing your root for sure.
Click to expand...
Click to collapse
Iam reading now about the franco kernel (page 5 now) and found a lot of users have a problem with heat and bootloop (u r 1 of them) is this may be in first issues? which version u r using now and how it is regarding over heat since iam using it in a warm country

One of the early version had heat issues (4 I believe), but Franco is now at No 6 (I'm using this one ATM), which is just fine, no problems, great battery life.

chasmodo said:
One of the early version had heat issues (4 I believe), but Franco is now at No 6 (I'm using this one ATM), which is just fine, no problems, great battery life.
Click to expand...
Click to collapse
Is there special settings for this kernel, I read about governer which is very new to me, all what I used to do before is just flash the kernel and thats it.
Does flashing this kernel via the CWM recovery will increase the flashing count (because of warranty)?
If I made a backup (CWM) before flashing this Kernel and did not like, If I restore the backup would I get the old Kernel or I must reflash it?

thermax04 said:
Is there special settings for this kernel, I read about governer which is very new to me, all what I used to do before is just flash the kernel and thats it.
Does flashing this kernel via the CWM recovery will increase the flashing count (because of warranty)?
Click to expand...
Click to collapse
No special settings for the governor at all, don't worry about that, just flash it and you're OK. And it won't increase you binary counter.

chasmodo said:
No special settings for the governor at all, don't worry about that, just flash it and you're OK. And it won't increase you binary counter.
Click to expand...
Click to collapse
Ok , will do
Sorry to ask, should I flash it by choosing flash kernel from CWM app, or by choosing install from zip file from CWM Recovery screen?

Install from zip file, then browse to the file.

Related

[Q] kernels Question

Because i am still new on flashing roms and i am not expert in the subject of kernel job....i want to ask what is the differents of the Cf kernel or the abyssnote or SpeedMod N7000 or V2.0 FM Kernel .
giorgosfl said:
Because i am still new on flashing roms and i am not expert in the subject of kernel job....i want to ask what is the differents of the Cf kernel or the abyssnote or SpeedMod N7000 or V2.0 FM Kernel .
Click to expand...
Click to collapse
CF kernel is a specialist Kernel. It has the CWM Recovery mode software on it. You install the CF kernel to get that onto your phone and then you flash another more feature rich kernel over the top and the recovery software will still be there.
Abyss : Most updated and tweaked. Has caused heat problems in V3 but seems its been fixed. Heat issues on the Note are still an area of voodoo so maybe its not even Abyss kernel problem...
FM : Very reliable.
SpeedMod : Sounds like it will blaze ahead in future, but going kind of slow at the moment.
Flash with CF to put on your recovery.
Then flash with FM and use that for a while till you know how the phone performs.
Then flash with Abyss and see if it doesn't cause any problems. If it does then compare SpeedMod with FM and go with the faster, lowest heat one.
Then in a month you can see how SpeedMod compares to Abyss
Do you have any special needs like VPN or call recording?
PurpleMelbourne said:
CF kernel is a specialist Kernel. It has the CWM Recovery mode software on it. You install the CF kernel to get that onto your phone and then you flash another more feature rich kernel over the top and the recovery software will still be there.
Abyss : Most updated and tweaked. Has caused heat problems in V3 but seems its been fixed. Heat issues on the Note are still an area of voodoo so maybe its not even Abyss kernel problem...
FM : Very reliable.
SpeedMod : Sounds like it will blaze ahead in future, but going kind of slow at the moment.
Flash with CF to put on your recovery.
Then flash with FM and use that for a while till you know how the phone performs.
Then flash with Abyss and see if it doesn't cause any problems. If it does then compare SpeedMod with FM and go with the faster, lowest heat one.
Then in a month you can see how SpeedMod compares to Abyss
Do you have any special needs like VPN or call recording?
Click to expand...
Click to collapse
Many thanks for clarifying the doubts on the same subject i had..Sorry for being a noob, just bought a note, rooted with CF root and have CWM..now, according to ur post, if i install FM kernel, does it mean that i will lose Root or it just overwrites CF kernel?
yes you should first Flash Cf kernel fot the cwm and after you can flash any Note kernel you want for more option without loose root or cwm the only thing happen is to gain things from the others kernels
giorgosfl said:
yes you should first Flash Cf kernel fot the cwm and after you can flash any Note kernel you want for more option without loose root or cwm the only thing happen is to gain things from the others kernels
Click to expand...
Click to collapse
Thanks for the clarification. So it means, if i want to flash any custom rom, i can just go ahead or i shud flash with any kernels?
for ex, i read ROMOW V7.5 HD by mowmo needs abyss kernel?

SOD help please

I am coming from rocket rom 22 but since I always had little bugs here and there, I had decided to choose LA4 stock rooted and slightly tweaked rom with franco kernel 7. It seems, with all custom roms, I have had some sort of SOD problems. One SOD every few days. then I flashed LA4 rooted and franco kernel 4, 5, 6, and now 7. It seems everything works well but I am getting one SOD every day. This does not happen when phone is in deep sleep it happens randomly. when I put my phone down and screen shuts off and then if I try to unlock my phone after a few seconds, i find the phone is in SOD. I have to take out the battery to re-initiate the phone. yesterday I was making a call and then phone shut off and went into sod. now I am all confused and a bit irritated.
what should I do? please help. I have resetted the phone a few times and still the same thing. Please help.
did you overclock your processor all the time?
P.S
Connect to the PC ODIN and flash stock rom., with any CF root kernel.
avetny said:
did you overclock your processor all the time?
P.S
Connect to the PC ODIN and flash stock rom., with any CF root kernel.
Click to expand...
Click to collapse
No over-clocking at all, rom is stock with slight tweaks.
aftabbabar said:
No over-clocking at all, rom is stock with slight tweaks.
Click to expand...
Click to collapse
then please flash stock rom with CF root kernel from PC odin.
After always use [SCRIPT] jBroid Kernel Cleaning before flashing kernels
P.S .
A lot of tweaks not compatible with some kernels.
PC odin also will remove all garbage from some folders where the standard recovery cant clean.
I also recommend to you later CheckROM Revo NoteHD™ V5.
Stay with stock kernel just to see if any SOD issues will appear again.

[Q] Galaxy Note GT N7000 eMMC Bug/Kernel Related Question

Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.

[Q] First Time Rooting Galaxy Note GT-N7000

Okay Guys, I have read thread after thread but I'm still unsure on a few things and would really appreciate some straight answers here:
My fiance has a Samsung Galaxy Note GT-N7000 with the following:
Android Version: 4.0.4
Baseband Version: N7000XXLRK
Kernel Version: 3.0.15-N7000XXLRK-CL811902
Build Number: IMM76D.XXLRK
Now I'm not really sure if we need to root the phone or not, all she really wants is:
1) Custom themes (different unlock sliders ect)
2) More customizing apps like SPB Shell 3D
3) Better Battery Life
From what I understand in order to get noticably longer battery life and UI customization you need custom ROMs with optimized code, but I could be wrong.
I would would also like to be able to Overclock the CPU but then thats just me being a bloke
So heres the Questions:
1) There are now One-Click rooting batch file that reduce the risk of end user mistakes Soft/Hard bricking the Phone
Q1) Is this the part that is unsafe? or is it just flashing custom ROMs which is unsafe?
Q2) Should I use CWM to flash ROMs / Recovery / Wipe as in some threads thats the advice and in others you get DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
Q3) Is there a way of installing Custom unlock sliders and SPB Shell 3D without having to root the phone? I've heard you need DroidWall to block Wifi and Data so the app doesnt call home, but that this requires the phone to be rooted first?
Im really sorry for all the stupid questions but hopefully somebody can clear things up for me.
Thanks
For installing themes and apps,you need not do any rooting
There are many third party apps to install in play store
For lock screen themes,try go locker,magic locker or milocker
And spb shell can be installed without getting rooted
If you are interested in rooting and flashing custom roms,then first flash a safe kernel(like hydracore) and then flash custom rom through cwm recovery
Dont do any wipe on stock kernel,it may brick your phone
So if you are still interested in rooting,simply flash hydracore kernel through pc odin
Sent from my GT-N7000 using xda app-developers app
A1; wiping from stock recovery if ics is unsafe.
A2; cwm is used to flash roms
A3; spb shell doesn't require root. Droidwall is like a firewall. it works on iptables. so it needs root.
If u root u can customize ur phone to gr8 extent
# message swifted from Note, travelled in the air to gateway and wi-maxed to [email protected] #
treesmoker said:
Okay Guys, I have read thread after thread but I'm still unsure on a few things and would really appreciate some straight answers here:
My fiance has a Samsung Galaxy Note GT-N7000 with the following:
Android Version: 4.0.4
Baseband Version: N7000XXLRK
Kernel Version: 3.0.15-N7000XXLRK-CL811902
Build Number: IMM76D.XXLRK
Now I'm not really sure if we need to root the phone or not, all she really wants is:
1) Custom themes (different unlock sliders ect)
2) More customizing apps like SPB Shell 3D
3) Better Battery Life
From what I understand in order to get noticably longer battery life and UI customization you need custom ROMs with optimized code, but I could be wrong.
I would would also like to be able to Overclock the CPU but then thats just me being a bloke
So heres the Questions:
1) There are now One-Click rooting batch file that reduce the risk of end user mistakes Soft/Hard bricking the Phone
Q1) Is this the part that is unsafe? or is it just flashing custom ROMs which is unsafe?
Q2) Should I use CWM to flash ROMs / Recovery / Wipe as in some threads thats the advice and in others you get DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
Q3) Is there a way of installing Custom unlock sliders and SPB Shell 3D without having to root the phone? I've heard you need DroidWall to block Wifi and Data so the app doesnt call home, but that this requires the phone to be rooted first?
Im really sorry for all the stupid questions but hopefully somebody can clear things up for me.
Thanks
Click to expand...
Click to collapse
Rooting is no problem. The cause of brick, as mention by others is the wiping under stock kernel.
Just install the philz modded stock rom, u will get a safe stock kernel + root + cwm.
Or if u want just follow dr. Ketan thread on rooting.
Anyway, try not to use one rooting.
I m not sure whether can work or not, but my last reading base on the search i found, it can't be use for ics. U may correct me if i m wrong.
Best if u want simple rooting nd safe kernel, just flash philz.
And yes if u want to flash custom rom u can only do in cwm.
U cannot flash it under stock recovery.
Good luck!
Sent from my GT-N7000 using xda app-developers app
Hi @all,
i'm new here kind of confused too about rooting my N7000....
Could somebody please post or link an easy and safe method for rooting the N7000 with ICS 4.0.4???
Only root is needed, no kernel or rom etc...
Thanks a lot!!
Have a look here:
PhilZ stock kernel rooted / safe kernel and safe recovery
http://forum.xda-developers.com/showthread.php?p=31911656
Can be flashed in stock recovery 3e.
And here is a tutorial how to root/unroot by Dr.Ketan
http://forum.xda-developers.com/showthread.php?p=18978158
Thanks a lot! Dr. Ketan seems to be exact what i was looking for!!! :laugh::good:
For installing themes and apps,you need not do any rooting
There are many third party apps to install in play store
For lock screen themes,try go locker,magic locker or milocker
And spb shell can be installed without getting rooted
If you are interested in rooting and flashing custom roms,then first flash a safe kernel(like hydracore) and then flash custom rom through cwm recovery
Dont do any wipe on stock kernel,it may brick your phone
So if you are still interested in rooting,simply flash hydracore kernel through pc odin
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
First Off.... Thankyou a million! I never knew about the apps for theming in the Play Store, the Mrs is more than happy with her new Pink UI and iLike Lock theme...
I've Only tried Go locker so far but so far so good!!!
So let me get this straight, Wiping your phone using the stock wiping utility provided with the phone on the standard Sumsung supplied Kernal is unsafe???
A1; wiping from stock recovery if ics is unsafe.
A2; cwm is used to flash roms
A3; spb shell doesn't require root. Droidwall is like a firewall. it works on iptables. so it needs root.
If u root u can customize ur phone to gr8 extent
Click to expand...
Click to collapse
So CWM is an alternative recovery method which is used for flashing Custom Roms, simply enough.
Can you just explain what you mean by customizing your phone to a great extent? what else can be done?
Rooting is no problem. The cause of brick, as mention by others is the wiping under stock kernel.
Just install the philz modded stock rom, u will get a safe stock kernel + root + cwm.
Or if u want just follow dr. Ketan thread on rooting.
Anyway, try not to use one rooting.
I m not sure whether can work or not, but my last reading base on the search i found, it can't be use for ics. U may correct me if i m wrong.
Best if u want simple rooting nd safe kernel, just flash philz.
And yes if u want to flash custom rom u can only do in cwm.
U cannot flash it under stock recovery.
Good luck!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Okay so find correct Kernal version or Philz, flash using stock recovery method then ill have root and CWM???
With Philz can I still Overclock the CPU?
Have a look here:
PhilZ stock kernel rooted / safe kernel and safe recovery
http://forum.xda-developers.com/show...php?p=31911656
Can be flashed in stock recovery 3e.
And here is a tutorial how to root/unroot by Dr.Ketan
http://forum.xda-developers.com/show...php?p=18978158
Click to expand...
Click to collapse
Thankyou very much for the direct links, very helpful indeed, now if I can find the "thankyou" button you'll all be getting my thanks!
Looks like you dont really need to root. Except for the overclocking (there goes your battery life
Make sure you get the kernel right. After that there isnt much that can go really wrong. Or just wait a while, Jelly Bean (an update for your operating system is) around the corner
What I ment was if I want SPB Shell for free without paying for it, I heard that you can use Droidwall to block its internet contecting so it doesnt get dectected and require payment?
Click to expand...
Click to collapse
Oops... this is not the site for asking these kinda question.. its banned in here.. moderator rules u know :angel:
So let me get this straight, Wiping your phone using the stock wiping utility provided with the phone on the standard Sumsung supplied Kernal is unsafe???
Click to expand...
Click to collapse
Yes N7000 running ICS stock rom with stock kernel .. wiping on them triggers the emmc erase command that corrupts the system. that y philz kernel is a stock kernel with the erase command disabled and u get root as well as CWM v6.0.1.4 latest. :good:
With Philz can I still Overclock the CPU?
Click to expand...
Click to collapse
No Philz is a stock kernel so its just like that, for OC u need a kernel that supports it eg. Hydracore OC.
Can you just explain what you mean by customizing your phone to a great extent? what else can be done?
Click to expand...
Click to collapse
Installing custom ROMs
Installing Mods like battery mod, call recording, full screen caller ID, 15 toggles, transparent notification . infact u can change the look of ur phone if u know how to tinkle with the System apks and frameworks. Mods mainly require u to access the system folder which is only available when u root.
go thru this thread
Good battery life from my N7000 began with the XXLRK. Succeeding builds XXLRQ and XXLRT performed just as well. Therefore do not expect much battery life improvements until your wife changes her phone habits.
I am using Paranoid Utaka now. Even with low cpu settings things are the same with batt life. I believe this has already reached design limits.
Hey guys, sorry its been a long time since my last reply, the Mrs has been so happy using her galaxy note with the new themes/loaders that I haven't needed too ask for more assistance......until now!
To cut a long story short I have a two year old soon who often uses this now to doodle on some of the drawing apps and somehow he removed the apps icon which launces the app tray, and the Mrs was always complaining that she kept getting popups with invites from women on dating websites, (again probably the boy when he's frantically jabbing the screen when he's drawing)
So anyway we wanted to wipe the phone back to its factory settings and I remembered you guys saying it was unsafe to wipe from stock ICS so I've flashed Phiz latest Kernal with touch recovery mode.
I now want to install some custom roms as I'm feeling adventurous however I've been reading lots of conflicting info in the threads on here, some saying flash back to GB rom first or you'll brick your note
And others saying that flashing back to Gb roms are the cause of the bricks!!!
Now I've already made a backup in philz recovery, but do i need to flash back to GB or not in order to instsll paranoid Android?
Also any other rooms you guts can recommend? Are there any stock jelly beans roms yet?
Sent from my GT-N7000 using xda app-developers app
Yes lots of stock leaks jb roms like Xxlsa and xxlsc. No need to go back to gb just make sure you on a safe kernel. That's it
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Yes lots of stock leaks jb roms like Xxlsa and xxlsc. No need to go back to gb just make sure you on a safe kernel. That's it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Cheers man, just finished flashing the ultimate JB rom and its awesome, thanks again to everybody who has helped me out through this whole process.

[KERNEL][STOCK] Stock 5.0 LRX21O Flashable Kernel

Hello all,
Couldn't find a stock flashable kernel for in between kernel flashes, so I slapped this one together. I used an old kernel script I had from back in the day (see my thread history) and just put the boot.img inside and changed the UI text. Tested working. Enjoy!
Handy! Thanks for your efforts.
Thank you?
No problem! I made it for myself and realized nobody had one up here so I figured it could help at least one person.
Thanks, always handy when you've tried a kernel that is not good
Thank you very much for this man!
Thanks
First of all, thank you for sharing it with us.
Then, from my understanding since this is Google Stock Kernel that comes with Lollipop, I'm assuming it won't allow root even flashing SuperSU ? (Last time I've read the kernel needed to be somewhat compliant with root so you can use root), am I right?
Cheers!
MidnightDevil said:
First of all, thank you for sharing it with us.
Then, from my understanding since this is Google Stock Kernel that comes with Lollipop, I'm assuming it won't allow root even flashing SuperSU ? (Last time I've read the kernel needed to be somewhat compliant with root so you can use root), am I right?
Cheers!
Click to expand...
Click to collapse
You're correct. So basically what I do is flash this, then immediately flash the next kernel I want to use in the same TWRP session.
jlink38 said:
You're correct. So basically what I do is flash this, then immediately flash the next kernel I want to use in the same TWRP session.
Click to expand...
Click to collapse
Thanks, also, from my understanding, some users reporting broken scripts when switching from one custom kernel to another. The solution so far was to flash Stock kernel before flashing another custom kernel. This happene(d) betweeen Franco Kernel and ElementalX, where sweep2wake functions wouldn't work.
Thanks for clearing this up, a stock kernel is always handy whatever the reason
So, I'm on Franco Rom can I flash this kernel and then xxkernelxx? Thanks in advance
Duilio Patiño said:
So, I'm on Franco Rom can I flash this kernel and then xxkernelxx? Thanks in advance
Click to expand...
Click to collapse
Sure, flash away, as long as it is stock 5.0. Not sure how it would fare with AOSP. YMMV.
jlink38 said:
Sure, flash away, as long as it is stock 5.0. Not sure how it would fare with AOSP. YMMV.
Click to expand...
Click to collapse
Thanks
Duilio Patiño said:
So, I'm on Franco Rom can I flash this kernel and then xxkernelxx? Thanks in advance
Click to expand...
Click to collapse
Not all kernels modify the devices system files.
I believe though that since Franco kernel modifies the system files and Since flashing just the stock recovery wouldn't alter or restore those modified system files back to normal otherwise it may/will cause conflicts and errors while running the new kernel.
You would need to (depending on your current setup)
1. Dirty flash the 5.0 ROM that your running to replace those system files back to normal and then flash the OP's stock recovery.
2. Fastboot flash the 5.0 Google Factory System.img (whick would reaplace the modified system files) and or the google factory boot.img or just flash the OP,s stock recovery and then any other compatible kernel in one setting.
3. Restore a stock nandroid backup that has the stock system.img and then flash any comparable kernel.
@jlink38
Thank you for this... Very Much appreciate and it will definitely come in very handy! :good:
I like to have a copy of evey stock recovery version for the N5 in a flashable.zip
xdrc45 said:
Not all kernels modify the devices system files.
I believe though that since Franco kernel modifies the system files and Since flashing just the stock recovery wouldn't alter or restore those modified system files back to normal otherwise it may/will cause conflicts and errors while running the new kernel.
You would need to (depending on your current setup)
1. Dirty flash the 5.0 ROM that your running to replace those system files back to normal and then flash the OP's stock recovery.
2. Fastboot flash the 5.0 Google Factory System.img (whick would reaplace the modified system files) and or the google factory boot.img or just flash the OP,s stock recovery and then any other compatible kernel in one setting.
3. Restore a stock nandroid backup that has the stock system.img and then flash any comparable kernel.
@jlink38
Thank you for this... Very Much appreciate and it will definitely come in very handy! :good:
I like to have a copy of evey stock recovery version for the N5 in a flashable.zip
Click to expand...
Click to collapse
No problem!
Thank you very much for the thoughtful upload, OP!!
Been meaning to try out Franco's latest nightly for LP to see if I get an improvement in battery life
I'm assuming if I don't like Franco's kernel, I just simply flash this zip in recovery (I use Philz CWM) to return back to the stock LP kernel?
RevoWution said:
Thank you very much for the thoughtful upload, OP!!
Been meaning to try out Franco's latest nightly for LP to see if I get an improvement in battery life
I'm assuming if I don't like Franco's kernel, I just simply flash this zip in recovery (I use Philz CWM) to return back to the stock LP kernel?
Click to expand...
Click to collapse
Pretty much, yeah
Sent from my Nexus 5
amir7777 said:
Pretty much, yeah
Sent from my Nexus 5
Click to expand...
Click to collapse
Cheers buddy
I'm in Elementalx kernel and Rom stock. To receive OTA, flash stock kernel is enough?
danifeb said:
I'm in Elementalx kernel and Rom stock. To receive OTA, flash stock kernel is enough?
Click to expand...
Click to collapse
You should be OK. I don't know what else you have tweaked.

Categories

Resources