Problem with flashing GamerzRom - Galaxy S I9000 Q&A, Help & Troubleshooting

ok, so i wanted to flash the newest GamerzRom to my SGS. I backed up to Stock Rom, flashed Semaphore 2.5.0 and downloaded the rom. After i installed it following instructions on their site, my phone was rebooted, and it stuck on the Galaxy S bootscreen.. It turning off at it, and again, launch by itself, over again.. Need help. Instalation completed without problems.

Try factory reset/ wipe data then reboot phone.
Sent from my GT-I9000 using xda premium

doesnt work. if i go into recovery, i have a lot of errors, something like:
E:/..... not found
cant get into internal memory and ext.

Flash to stock agn usin odin.
Sent from my GT-I9000 using xda premium

i did it 5 times ;/. anytime i back to stock, and want to flash GamerzRom, it does nothing.

When u went to stock can phone be use? If can means theres sth wrong wif the dl try re-dlin gamerzrom agn. Fyi im also usin gamerzrom.
Sent from my GT-I9000 using xda premium

i redwonloaded it 4 times, when i back to stock, my phone is usable.. i dont know what's wrong. my stock is 2.3.3 XXJVK. maybe is that the reason?

yp261 said:
i redwonloaded it 4 times, when i back to stock, my phone is usable.. i dont know what's wrong. my stock is 2.3.3 XXJVK. maybe is that the reason?
Click to expand...
Click to collapse
Ya dats the reason go dl 2.3.6 JW1 than flash gamerzrom.
Edit : its 1242AM here n im gona slp. Reply u tml n gd luck
Sent from my GT-I9000 using xda premium

great man! thank you!

yp261 said:
great man! thank you!
Click to expand...
Click to collapse
So problem solved?
Sent from my GT-I9000 using xda premium

yes, bu t now i have a problem with sixaxis controller for this ROM. check my thread in Android [email protected] if you know something about it

GT-i900 Gamerz ROM 6.2 Phone showing mobile + "i" + compuetr with black scree
Hi,
I have installed I9000XXJVU_I9000OXAJVU_OXA I9000 XXJVU 2.3.6 Value Pack and than does rooting through CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS and after that i have installed the Gamerz ROM 6.2 and i am in trouble now.
What happen is when i started my mobile the market could not download anything so i just reflashed the XXJVU 2.3.6 with odin in download mode and it stuked with no update,so with no option i just have unplug the usb from my mobile and when i started it just showing mobile + "i" + computer with black screen.I could enter the download mode by pressing the down arrow + ok + power button but dont know which ROM to flash or what to do.
I really need your help plz help me.
Thanks million in advance
Sys81 said:
So problem solved?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse

yatharth1981 said:
Hi,
I have installed I9000XXJVU_I9000OXAJVU_OXA I9000 XXJVU 2.3.6 Value Pack and than does rooting through CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS and after that i have installed the Gamerz ROM 6.2 and i am in trouble now.
What happen is when i started my mobile the market could not download anything so i just reflashed the XXJVU 2.3.6 with odin in download mode and it stuked with no update,so with no option i just have unplug the usb from my mobile and when i started it just showing mobile + "i" + computer with black screen.I could enter the download mode by pressing the down arrow + ok + power button but dont know which ROM to flash or what to do.
I really need your help plz help me.
Thanks million in advance
Click to expand...
Click to collapse
that is what is called BSOD (black screen of death) don't worry just put it in download mode and flash a stock rom, after that custom kernel ( i use semaphore) for the stock rom look in general subforum

I have problems with the Phone setup wizard freezing at GPS enable or not.
everytime, what should i do

Related

[Q] "Weird brick" ?!

Hello...
I have a problem with my SGS. I was on Darky 9.5, and decided to upgrade to JVB. I had CWM & working recovery on Darky 9.5, I disabled lagfix, and I downloaded deodexed JVB rom - in a zip file. I flashed it trough cwm, and it worked. With some issues. The rom (JVB) worked fine, but dialer app force closed a lot, and it was slow, gps badly working etc... I rooted trough odin with chainfires kernel 3.1 and then flashed a small zip file that enabled overscroll glow effect. And all of those things worked. I tried to flash to stock rom using odin and download mode but when I connect my sgs, my pc cannot recognize it. It says "USB device not recognised". So I cannot use ODIN, and also all of a sudden, i cannot enter cwm, even with 3 button combo. I tried this on 3 computers, and I have a second SGS which works fine, including download mode & odin DOES recognise it. So drivers should be fine. Anyone have a solution to this problem? I CAN start DOWNLOAD mode but 3 PC's don't recognize it. And my other SGS works on ALL 3 PC's.
Oh, I fogote to write. I directly flashed 2.3 JVB cwm zip (deodex. file) from cwm (darky 9.5) and that didnt't update bootloaders. The JVB rom booted and worked fine, but after powering on sgs displayed a weird looking boot screen, but the rom booted successfully anyway.
I would really appriciate your help.
Thanks.
Install galaxy s and nexus s drivers on your pc, download odin1.7, download stock gingerbread, tick reparation and phone bootloader update, connect your phone in download mode and click start
Sent from my GT-I9000 using XDA Premium App
themate1987 said:
Install galaxy s and nexus s drivers on your pc, download odin1.7, download stock gingerbread, tick reparation and phone bootloader update, connect your phone in download mode and click start
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
agreed
u need to update ur bootloader for 2.3.3
themate1987 said:
Install galaxy s and nexus s drivers on your pc, download odin1.7, download stock gingerbread, tick reparation and phone bootloader update, connect your phone in download mode and click start
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I would do the same
Sent from my GT-I9000 using Tweaky Ron
Ok, and I already did the same
I tried all of those things, and it didnt work, it won't recognize sgs when in download mode. Only thing I didn't try is using nexus s drivers... I will try that.
Is there a term "usb bricked?!?"
Have you tried to turn on usb debugging in applications-development?
Sent from my GT-I9000 using XDA Premium App
I have a same problem - topic here>
http://forum.xda-developers.com/showthread.php?p=13905075#post13905075
and to here -
http://forum.xda-developers.com/showthread.php?t=1084171
And nobody know anwers on ours questions yet...
I will follow your topic
"Weird brick" ?!
I have same problem. So does somebody solved this problem?

Captivate download mode

i have recently flashed my captivate with the latest version of ics . however i want to go back to stock,and i can not seem to get my phone into download mode, no matter what i try.i have tried everything except for a jig. can someone help me? would be much appreciated <3
Am too facing the same problem i had tried to flash Mosaic VIII Infused it installed also pretty well after reboot it simply stayed at some random colors screen n never booted up completely. and am trying to get it in to the download mode but its not going to down load mode even with the jig.
my phone is perfectly normal,running fine.
i just want to go back to stock,but download mode isnt working
crunkstep said:
i have recently flashed my captivate with the latest version of ics . however i want to go back to stock,and i can not seem to get my phone into download mode, no matter what i try.i have tried everything except for a jig. can someone help me? would be much appreciated <3
Click to expand...
Click to collapse
Jig was the only thing that worked for me.
Sent from my SGH-i897 using xda premium
banveerad said:
Am too facing the same problem i had tried to flash Mosaic VIII Infused it installed also pretty well after reboot it simply stayed at some random colors screen n never booted up completely. and am trying to get it in to the download mode but its not going to down load mode even with the jig.
Click to expand...
Click to collapse
Try reflashing back to ICS, then try the Jig. That's what I had to do.
Sent from my SGH-i897 using xda premium
now am able to get it to the download mode and trying to flash to original stock using odini3 one click but its not recognizing my phone anything else to be done?
banveerad said:
now am able to get it to the download mode and trying to flash to original stock using odini3 one click but its not recognizing my phone anything else to be done?
Click to expand...
Click to collapse
If you can get into recovery try flashing MyICS beta 1.12.11. On this rom my PC recognized my phone easily. It's a great rom but if you don't like it at least you should be able to use Odin.
Sent from my GT-I9000 using xda premium
crunkstep said:
my phone is perfectly normal,running fine.
i just want to go back to stock,but download mode isnt working
Click to expand...
Click to collapse
See my post above.
Sent from my GT-I9000 using xda premium
i am getting one soon ,thanks.
If your on ics you need nexus s drivers not the regular galaxy s drivers for your phone to be detected
Sent from my SAMSUNG-SGH-I897 using XDA App

[q] samsung note gt7000 wont boot

my samsung note aint booting its stuck on the samsung galaxy note nt7000 screen .. and i cannot access the up vol . home power button setting to put a rom on ... will a usb Jig work ??
Use Vol down + power + home to put a Rom using pc odin
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Use Vol down + power + home to put a Rom using pc odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hiiyyaaa
thanks so much its popped into download mode .
now im in odin where do i find the ics release please
how do i install it .. im sorry for asking too many questions
ive got odin on
Go to samfirmware.com and download the Rom of your choice and flash it using odin
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Go to samfirmware.com and download the Rom of your choice and flash it using odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is that only by extracting . and then clicking pda in odin and click the file ?? would i need a kernel "?? also cause im getting a nz 1 will it be unlocked ??
Yes thats all.. the rom will include the kernel as well. Not sure if it will be unlocked or not. Only after flashing the ROM you will be able to know,. But even if it gets locked, there are lots of apps in the market that can unlock it.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Yes thats all.. the rom will include the kernel as well. Not sure if it will be unlocked or not. Only after flashing the ROM you will be able to know,. But even if it gets locked, there are lots of apps in the market that can unlock it.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thankyou very much .. its downloading now .. you will have saved my phone i thought it broke i had it on cmw and wiped all user files and was stuck on the boot screen and wouldnt do nothing ,,,
sorry but so when i put it in odin . extract load it on pda then press start . what happens next do i need to do anything afterthat ..
oh okay soo i will only no if the network lock shows once its done .. thankyuu very much again 100+ feedback to you
load the ROM(tar.md5) file in PDA, and connect the phone to PC thats all. Donot chnage any other setting. And flash. The phone will autoboot after the flash.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
load the ROM(tar.md5) file in PDA, and connect the phone to PC thats all. Donot chnage any other setting. And flash. The phone will autoboot after the flash.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hiiya well still no luck when in odin it loads till about till the end and it freezes any ideas ? factoryfs
If it gets stuck at factoryfs repeatedly, and if you had wiped in ics stock kernel then it is a case of emmc brick. The guide in my signature should help.
Sending from my phone
before repartition using custom pit, try with the standard Once.. most of all, how did you get in the Original situation ?

[Q] Captivate soft bricked.

I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium
Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..
Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium
Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like
n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,

Galaxy S dead after kernel update failed in cwm Recovery

Hey Guys, i tried to update the kernel after Updating Cynogen mod by Ivendor on my Galaxy S Plus, but something went wrong the recovery crashed duo updating , after i switched the phone off nothing happens anymore the phone doesn't switch on if i push the power button , any idee to get it back to life ?
Tried getting it in Download mode (http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Download_Mode) and flash a fresh ROM using Odin from there? EDIT: might try flashing a kernel first of course, and see if it can be rescued.
L0kiii said:
Tried getting it in Download mode (http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Download_Mode) and flash a fresh ROM using Odin from there? EDIT: might try flashing a kernel first of course, and see if it can be rescued.
Click to expand...
Click to collapse
Key combo doesn't work , like i sayd the phone do nothing , there is no idication of loading or anything if i plug in USB.
Nogardrevlis Lectar said:
Key combo doesn't work , like i sayd the phone do nothing , there is no idication of loading or anything if i plug in USB.
Click to expand...
Click to collapse
What kernel did you try to install?
If u have warranty u can give it back.. The same thing happened to me and because i had warranty i got free repair
Sent from my GT-I9001 using xda app-developers app
akwi42 said:
What kernel did you try to install?
Click to expand...
Click to collapse
I tryed to install this kernel, had worked before, so i decided to update to Invendor Beta 3 with this kernel flashed Ivendor first then kernel.But recovery rebooted during kernel install, then i try to restart the phone again and flash again but that seems to be the thing that i shouldn't do because the current kernel was only in memory duo the fail of installing the newone.
http://forum.xda-developers.com/showthread.php?p=38710498
kagouro said:
If u have warranty u can give it back.. The same thing happened to me and because i had warranty i got free repair
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
No I'am out of waranty i had got the Phone from Vodafone, i just bought a jig now hope i get it in download mode to reflash if didn't i will sent it to Handy repair shop maybe they can fix it.
/me waits for his jig to arive
Nogardrevlis Lectar said:
No I'am out of waranty i had got the Phone from Vodafone, i just bought a jig now hope i get it in download mode to reflash if didn't i will sent it to Handy repair shop maybe they can fix it.
/me waits for his jig to arive
Click to expand...
Click to collapse
Try this... I had a similar thing happen to me a while ago...
http://forum.xda-developers.com/showthread.php?t=819551
1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY
gopalasubramanium said:
1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY
Click to expand...
Click to collapse
Thanks for your Advice,
but how should i do that the phone do nothing no Recovery or Download mode no power via buttons , i wait for the jig and will see if something happend than.
Edit: The Jig doesn't solved the Problem no Download mode even with jig and no com port found in Odin. I send the phone out now to a Repair service to perform Jtag Repair.
Update: Phone is back and working again. will stick with android 2.3.6 in the meantime , don't want brick it again.

Categories

Resources