Quick question, before trying out the leaked ICS for the chinese Note, I made a nandroid backup for both my old gingerbread rom and ICS rom. After trying it out, I decided that gingerbread is probably more stable for daily use. Then I try a CWM restore and it failed. It failed at system.
Then I tried out my nandroid backup for the the leaked ICS and it failed at system too.
Anyone have any idea what is causing this problem?
I was able to use odin to reflash the leaked ICS which is good, but I still wonder why this happened? It doesn't inspire confidence when a nandroid backup can fail just like this.
Mine did that.
If you attempt to restore, then after it fails, attempt to restore the same backup, it seems to work.
I think this was listed as expected behaviour in some thread. or at least someone else had the same experience as me.
This is what i posted on my thread when i hit this issue, takes some fiddling but worked for me 3 times
1. Boot into recovery
2. Attempt to wipe cache.
3. Attempt to factory reset
4. Start to recover rom it will hang.
5. pull battery
6. Boot into recovery
7. Select mounts and storage
8. Unmount system.
9. Format system
10. Remount system
11. Unmount cache
12. Format cache
13. Remount
14. Restore rom
U may need to pull battery a few times. But eventually it works and restores fine
The key is the first failed restore this has to be done.
I spent enough time myself doing it hence i got frustrated and stopped done it 3 or 4 times.
thering1975 said:
This is what i posted on my thread when i hit this issue, takes some fiddling but worked for me 3 times
1. Boot into recovery
2. Attempt to wipe cache.
3. Attempt to factory reset
4. Start to recover rom it will hang.
5. pull battery
6. Boot into recovery
7. Select mounts and storage
8. Unmount system.
9. Format system
10. Remount system
11. Unmount cache
12. Format cache
13. Remount
14. Restore rom
U may need to pull battery a few times. But eventually it works and restores fine
The key is the first failed restore this has to be done.
I spent enough time myself doing it hence i got frustrated and stopped done it 3 or 4 times.
Click to expand...
Click to collapse
+1 Your tip worked for me!
itismadhan said:
+1 Your tip worked for me!
Click to expand...
Click to collapse
Glad it worked for ya, puzzled me for a bit
There is another way to get your restore to work:
1. download AbyssNote 3.9 kernel from this thread. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system or flash a fresh GB rom
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. choose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, or flash a GB rom and it will work.
Hope this helps.
thering1975 said:
This is what i posted on my thread when i hit this issue, takes some fiddling but worked for me 3 times
1. Boot into recovery
2. Attempt to wipe cache.
3. Attempt to factory reset
4. Start to recover rom it will hang.
5. pull battery
6. Boot into recovery
7. Select mounts and storage
8. Unmount system.
9. Format system
10. Remount system
11. Unmount cache
12. Format cache
13. Remount
14. Restore rom
U may need to pull battery a few times. But eventually it works and restores fine
The key is the first failed restore this has to be done.
I spent enough time myself doing it hence i got frustrated and stopped done it 3 or 4 times.
Click to expand...
Click to collapse
I got to step 8 and unmounted the system, but the screen has gone blank except for the CWM logo??
What now?
olliesmith6121 said:
I got to step 8 and unmounted the system, but the screen has gone blank except for the CWM logo??
What now?
Click to expand...
Click to collapse
Try pulling out your battery, then go back to CWMR and try again step 8.
i tried the whole thing agian didnt work so i an trying your method, just trying to install back up agian its doing something so lets hope it works.
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
chasmodo said:
There is another way to get your restore to work:
1. download AbyssNote 3.9 kernel from this thread. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. chose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, and it will work.
Hope this helps.
Click to expand...
Click to collapse
It worked when all else failed,
Thank you
You're welcome.
What worked for me:
1. Installing RocketRomv20(probably going to work with any ROM)
2. Restart your phone, wait until it's ready for use
3. Use CWM if you installed it, then restore via using the App, not by rebooting into Recovery
4. Wait for it to finish
5. Done, your phone (should) be working again on an older backup!
purooo said:
What worked for me:
1. Installing RocketRomv20(probably going to work with any ROM)
2. Restart your phone, wait until it's ready for use
3. Use CWM if you installed it, then restore via using the App, not by rebooting into Recovery
4. Wait for it to finish
5. Done, your phone (should) be working again on an older backup!
Click to expand...
Click to collapse
What are you on about here? We're talking about specific restore problems from ICS to GB here, not just any old GB to GB restore.
Oh, my bad. I wanted to post this in a thread where one guy was experience a loop where the Galaxy Note message wouldn't go away, but he would still can get back to CWM. Sorry.
Thanks everyone!!! I think we should try to get this info posted on the op for the leaked rom. Judging by the responses here, a lot of people had this problem.
chasmodo said:
There is another way to get your restore to work:
1. download AbyssNote 3.9 kernel from this thread. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. chose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, and it will work.
Hope this helps.
Click to expand...
Click to collapse
All else failed... God bless the red pill recovery! Thanks for this.
Yeah red pill recovery worked for me too. Although i needed to resore an aosp ics backup the ics cwm failed to restore the backup created by itself so i had to flash abyyss note 3.9 and restore using red pill recovery.
Hallelujah!! Redpill recovery saved my night too! Got the same system restore error, when restoring my 30min earlier done backup! Clock is 1.14 am in Finland and i have wake-up at 8.00 am to work, so I realy had to get my phone working again, and it did it! Thank you guys!!
chasmodo said:
There is another way to get your restore to work:
1. download AbyssNote 3.9 kernel from this thread. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system or flash a fresh GB rom
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. chose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, or flash a GB rom and it will work.
Hope this helps.
Click to expand...
Click to collapse
thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
chasmodo said:
There is another way to get your restore to work:
1. download AbyssNote 3.9 kernel from this thread. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system or flash a fresh GB rom
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. choose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, or flash a GB rom and it will work.
Hope this helps.
Click to expand...
Click to collapse
Currently I'm on ICS Stunner 4.3. I come to this ROM through rooting method using dr. Ketan (by zergRush).
Now my question is:
1. Will the above method (Redpill) of going back to GB will work for me?
2. How to flash the GB ROM in the Redpill Recovery?
Thanks in advance.
louisebb said:
Currently I'm on ICS Stunner 4.3. I come to this ROM through rooting method using dr. Ketan (by zergRush).
Now my question is:
1. Will the above method (Redpill) of going back to GB will work for me?
2. How to flash the GB ROM in the Redpill Recovery?
Thanks in advance.
Click to expand...
Click to collapse
Yes, the Abyss/Redpill method will work. Just download a custom GB Rom (Cassie's XtraLite, Darky or Chrak's or whatever), place it on your SD Card and flash it after you've done your wipes from Redpill.
Related
hey guys i was using checkrom and i flashed criskelo's ics rom via abyss kernel...it flashed fine then it got stuck on bootloop...cwm recovery is still working and i can still go to download mode...but i can'y flash anything except franco's r3 kernel...which i had on my sd card...i am not able to flash any rom or even abyss kernel....what options do i have??? the last thing i want to do is to use pc odin...and if that is the only option then which stock rom should i use? Thanks.
EDIT: got it fixed by flashing old franco kernel 10...then flashing abyss kernel...and back to checkrom... Thanks.
try again with the following steps (do the exact steps please) :
If you flashed criskelo's ics rom successfully and you're still in bootloop, reboot to recovery and do a factory reset/data wipe and reboot again.....
- Flash the stock LB1 from the same thread you had up there with Odin, then flash CF Root kernel for LB1 just like you did for LA4
- Boot the ROM, let it settle for 10-15 minutes, then check if you have full root (copy/paste files to /system)
- Reboot your ROM couple of times again and check again for full root access
- After leaving it for another 10-15 minutes, copy "AbyssNotekernel42RedTouchOriginalLogo" and "ICS_Stunner_1.4.19" to your internal sd card (MUST be the SAME zips as mentioned)
- Long-press power button and choose reboot to recovery
- Go to install zip from sd card --> choose zip from internal sd card --> choose "AbyssNotekernel42RedTouchOriginalLogo"
- Check if flashing is successful, it should say "Install from sd card complete" in the end
- Select Go back, then go to Advanced --> Reboot Recovery
- If you do not have the Redpill Touch Recovery then you choose the wrong zip, download the right one and repeat the previous three steps:
It should say "RedPill Touch Recovery by AF974" at the top and "CWM v5.5.0.4" at the bottom in white, the rest of options are in red
- Go to Wipe menu --> wipe data / factory reset, wipe cache and wipe dalvik cache
- Go to Install menu --> choose zip from internal sdcard --> "ICS_Stunner_1.4.19" --> Yes
- After flashing has completed, go to Reboot Menu --> reboot system
- Let the ROM settle for a few minutes, and then check for your root privileges
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
edizarca said:
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Just flash it again ...see quick fix and solutions link below
xsenman said:
Just flash it again ...see quick fix and solutions link below
Click to expand...
Click to collapse
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
edizarca said:
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
Click to expand...
Click to collapse
are you not able to get into recovery? If only download than you need to get back to GB and than do a progressive update from GB to ICS to JB
Flash it again. From what I've heard, it only flashes the kernel the first time.
I had the same problem today with CM7 today. Just reboot in recovery and flash again cm zip, form there on everything is gonna run smooth!
edizarca said:
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Thanks!, this method worked a treat :highfive:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
kvarug01 said:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
Click to expand...
Click to collapse
Same here, after the Samsung and CM logos, and splash animation, it says :
"Encryption unsuccessful.
Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
To resume using your phone, you must perform a factory reset...."
After I tap Reset phone, it goes to CWM recovery.
Do the factory reset and the same thing occured in loop.
I came from JVU and CF root.
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
How long should the first boot take after following these steps? And does it have to be from SDCARD, because I can't get the rom onto my sd card, I can only do it via usb otg cable
---------- Post added at 05:11 AM ---------- Previous post was at 04:34 AM ----------
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Does it have to be from the sdcard or can you do it from a flash drive via usb otg. I cannot get the rom onto my sd card
paradiselost28 said:
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
Click to expand...
Click to collapse
The same thing happend to me.
Just plug out the battery and flash again on cwm recovery.
Sent from my GT-I9000 using XDA Premium 4 mobile app
I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.
AllieB said:
I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.
m1batt1 said:
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.
Click to expand...
Click to collapse
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
First of all you're getting a little ahead of yourself in trying to get to CM10 from where you are. Being on 2.2 you will need to get to a gingerbread ROM first as the bootloaders are different and will cause issues trying to go to CM10 if you don't go to gingerbread first.
The following link will take you to some one-click utilities that will update you to gingerbread along with the needed bootloaders. Also I suggest picking one from the list that says it has a CWM kernel injected so that you can save a step after the flash and have a CWM recovery kernel already installed.
Once you've used the one-click you shouldn't need to flash either of the kernels you've mentioned you should technically be able to just flash the CM10 and be good. Although when it comes to flashing the CM10 I suggest you go to the creaters thread or site and follow their exact directions for installing!
AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
I highly recommend you install official cm instead. They are updated and will be more stable.
Sent from a jelly bean
Solution- http://forum.xda-developers.com/showthread.php?p=51503452
Yesterday i tried multiple times to install eXistenZ Ultra v2.0.0 but evrey time i get nothing except Bootloop.
My phone never vibrate twice after flashing 266 kernel.
I read OP instruction very carefully & follow it but no luck. Only i miss one point every time- "Unmount System", when i go to corresponding menu in CWM i only get "Mount System". So my system is already unmounted, for that reason i skip that step.
Please help me to get rid of bug-full Stock 4.3.
My step-
1. Flash full 12.0.A.2.254
2. Flash 12.0.A.1.257 (kernel only)
3. Root (DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit)
4. Flash 12.0.A.2.254(kernel only)
5. Install CWM (Philz, CWM Touch and TWRP)
6. Go to CMW
7. Wipe Data, Cache, Dalvik Cache
8. Unmount System (i skip that step, when i go to corresponding menu in CWM i only get "Mount System". So my system is already unmounted)
9. Flash ROM + SuperSU_fix
10. Power OFF Recovery
11. Flash 12.1.A.0.266 (kernel only)
12. Power ON phone & waiting for Vibrate Twice(I never get it, i tried at least 5-6 times to flash this ROM but i never get it)
Thanks in advance
I have the same problem on the "unmount system". Hope someone can help us..
wgermano said:
I have the same problem on the "unmount system". Hope someone can help us..
Click to expand...
Click to collapse
Can you please link me to Stock 4.3 [0.266] Kernel only file ?
Can you still access CWM recovery ?
Do this -
Do a factory reset in recovery
Then go and UN- MOUNT System, If its already Unmounted mount it and unmount it again.
Then Flash ROM and SU Fix and flash the kernel after that.
For anyone having bootloop while installation follw this method
1. Flash full 12.0.A.2.254
2. Flash 12.0.A.1.257 (kernel only)
3. Root (DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit)
4. Flash 12.0.A.2.254(kernel only)
5. Install CWM (Philz, CWM Touch and TWRP)
6. Go to CMW
7. Wipe Data, Cache, Dalvik Cache
8. Unmount System (if it is mounted)
9. Flash ROM + SuperSU_fix
10. Power OFF Recovery
11. Flash 12.1.A.0.266 (kernel only)(If u get bootloop then step 12 )
12. Flash 12.0.A.2.254 kernel only and on the mobile till you get vibration two times,then force switch off using pin in back then flash .266 kernel again and wait for 3 to 4 bootloops.If you get the same problem again flash .254 kernel and repeat the same step once or twice.
13. Power ON phone & waiting for Vibrate Twice
Solution
wgermano said:
I have the same problem on the "unmount system". Hope someone can help us..
Click to expand...
Click to collapse
I got the solution
Here is it- http://forum.xda-developers.com/showthread.php?p=51503452
These are the problems. I did a clean flash and cleared the cache partition, and did a factory reset.
1. No notifications appear at all. Even when I have incoming mail and so on, no new notifications appear in the main bar. I only know things are happening when I check individual apps.
2. I have no settings tiles at all in the pull down quick settings. How do I add to this?
3. The default browser cannot be used. When I click on the icon, it opens to a blank screen and closes within half a second. It never stays open.
4. I can't boot into recovery at all. I've installed clockworkmod via Rom manager, but I cannot boot into it, nor can I use the volume up+home+power combo to reach it.
5. The home button doesn't respond at all.
Can anyone help?
Try booting into download mode and flash a stock rom via odin.
1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING
tysonraylee said:
1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
can i use this method too if i had problem with storage can't detected after flashing KK ROM??