With both GingerFusion and DreadGinger I seem to have the issue that when I turn my screen off or it shuts off on its own after being idle the lights on the 4 Soft Keys stay on and take an extra few seconds to turn off, which wouldn't be a big deal by if that was all, but once they turn off they keep flicking on and off every few seconds (like every 5 to 10 seconds) which is hella annoying. Anyone else experience this and if so is there a fix. Or does anyone have any ideas on How to fix it. I have tried wiping cache and dalvik cache as well as re-flashing the themes all to no avail. So if someone could help me fix it. I would really appreciate it. I hella dig these themes and would like to use them. But that flickering on and off repeatedly is straight up annoying.
Sent using my rooted LG Revolution
BackSeatSuicide said:
With both GingerFusion and DreadGinger I seem to have the issue that when I turn my screen off or it shuts off on its own after being idle the lights on the 4 Soft Keys stay on and take an extra few seconds to turn off, which wouldn't be a big deal by if that was all, but once they turn off they keep flicking on and off every few seconds (like every 5 to 10 seconds) which is hella annoying. Anyone else experience this and if so is there a fix. Or does anyone have any ideas on How to fix it. I have tried wiping cache and dalvik cache as well as re-flashing the themes all to no avail. So if someone could help me fix it. I would really appreciate it. I hella dig these themes and would like to use them. But that flickering on and off repeatedly is straight up annoying.
Sent using my rooted LG Revolution
Click to expand...
Click to collapse
2 ways you can fix it. Either hold your phone up to a light source (computer monitor or other light source).
Or, press and hold the power button, then select "power off" instead of reboot. Power the phone completely off, then restart the phone.
A little tip to avoid that happening again:
After you flash a theme or ROM, instead of selecting "reboot phone now" in the Recovery menu, select "Power Off." Let the phone turn completely off, then turn it back on.
spc_hicks09 said:
2 ways you can fix it. Either hold your phone up to a light source (computer monitor or other light source).
Or, press and hold the power button, then select "power off" instead of reboot. Power the phone completely off, then restart the phone.
A little tip to avoid that happening again:
After you flash a theme or ROM, instead of selecting "reboot phone now" in the Recovery menu, select "Power Off." Let the phone turn completely off, then turn it back on.
Click to expand...
Click to collapse
+9999 for the light source lol
Sent from my VS910 4G using xda premium
Fixed. Thanks for the help peeps
Sent using my rooted LG Revolution
hey i got a question, lol
on a stock zvc rom i used on LG Esteem (similar to revo) i made like 1 or 2 theme tweaks with framework-res.apk, services.jar & LGHome.apk... i seem to have an issue where i hold power for menu, select power off. but phone just reboots to boot animation than powers on rom again..
i only switched out statusbar_background.png in framework, added transparency line to services.jar (which seems to be working) and swapped LGHome.apk with version from zvb(previous fw update prior to zvc) so do you think it could be related to any of that, or is it just an actual problem with the rom..? thank you for any help..
Related
Hi I recently updated my stock to sense and afterwards have been noticing that the power button on top of the phone won't turn off the screen. I don't think anything is wrong with the power button because I can still long press and get the menu with power down, airplane mode, etc. I don't think its the sense UI either because it didn't start happening until I started downloading and getting rid of apps for my phone. My screen does still time out BTW and if anyone could help me solve this issue that'd be great
tlam93 said:
Hi I recently updated my stock to sense and afterwards have been noticing that the power button on top of the phone won't turn off the screen. I don't think anything is wrong with the power button because I can still long press and get the menu with power down, airplane mode, etc. I don't think its the sense UI either because it didn't start happening until I started downloading and getting rid of apps for my phone. My screen does still time out BTW and if anyone could help me solve this issue that'd be great
Click to expand...
Click to collapse
I have the same issue. I am running CM 5.0.6 but I think/suspect beautiful widgets may be at play here but I don't have the time to uninstall and test since I have my screen timeout to 1 minute, I just get by.
Hey Guys I really need your help my N1 won't power on for some reason. I really need to get some things off the phone from certain software that I had in case I have to have it repaired or sent away. I'll try to be brief what happened I was exercising with my phone inside a protective case that covers the whole phone and I went to change the next song while listening to music and when i went to push the power button the screen remained black the whole time and I couldn't see anything at all the screen was black the whole time after numerous attempts at pushing the power button. So I held down the power button to try and reboot it and then the music stopped, so then I hit the power button again to turn it on and it hasn't turned on since yesterday. I even took the battery out and let it chill for a min and still doesn't work. when I plug it in to the charger the orange/green light comes on and as well with the USB connection too, but still can get it to power on.
Anyone have any Idea what it could be? I am assuming it's the power button but I am not for sure. Is there anyway to turn it on again in case i need to recover any files, etc. the reason i want to get it to work is that I don't want to have to go through the hassle of sending it away to be repaired if there is some way I can do it myself. I am trying to avoid sending it away with my carrier and I really need to access certain files on the phone if all else fails. If anyone has any ideas I'd appreciate it thnx to anyone.
If it's a power button failure, you can put the phone on charge, then remove and reinsert the battery... keep trying, it will turn on eventually...
http://www.androidguys.com/2010/09/08/manage-nexus-broken-power-button/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed:+androidguyscom+(AndroidGuys)&utm_content=Google+Reader
Sent from my Nexus One using XDA App
it worked the first time I did it thank you so much well just in case it ever happens again how can I back up some things on my apps for example I have notes on AK notepad how would I back those up? and if I wanted to move some software to my sd card that doesn't allow it?
Hey thanks again you are a life saver!!!!!!!!
oh darn the X came up when I powered it up but still nothing just a black screen I got all excited for nothing
i got after 5 or so times of taking the battery out thnx again is there a way or software to make the N1 awake or power off with the trackball without rooting it since the power switch is buggy now?
Titanium Backup will backup apps and data to SD card.
Widget Locker has an option for trackball wake.
LockEnabler will let you turn screen off/sleep.
Quick Boot will let you reboot, boot into recovery etc. Be careful booting into recovery or boot loader, because power button is used to navigate (you have to use adb).
Sent from my Nexus One using XDA App
thnx again is there anyway to restart/reboot the phone if it is not rooted via trackball or another button?
Reboot is possible with Quick Boot (as noted above), but if you ever turn off then the battery toggle is your only option...
Sent from my Nexus One using XDA App
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.
I just attempted to root my Galaxy Note using the instructions found on the development forum and I thought everything went well. Now, however, once the phone starts it wont turn on again - if I press the power button the screen back light comes on but thats it. I have to remove the battery to restart it, but then the same thing happens again. Any idea how to fix this?
Will it go into download mode if so flash a stock rom with odin
Sent from my GT-N7000 using XDA Premium HD app
LightinDarkness said:
I just attempted to root my Galaxy Note using the instructions found on the development forum and I thought everything went well. Now, however, once the phone starts it wont turn on again - if I press the power button the screen back light comes on but thats it. I have to remove the battery to restart it, but then the same thing happens again. Any idea how to fix this?
Click to expand...
Click to collapse
Power off your phone - take out your battery if necessary and wait about a minute, then put it back in.
Press volume up + home + power and hold, see if you can get into Recovery.
If you can, wipe cache, dalvik and do a factory reset.
Try to reboot.
chasmodo said:
Power off your phone - take out your battery if necessary and wait about a minute, then put it back in.
Press volume up + home + power and hold, see if you can get into Recovery.
If you can, wipe cache, dalvik and do a factory reset.
Try to reboot.
Click to expand...
Click to collapse
I did all that and everything went through, same problem though after reboot - once the screen turns off, hitting the power button only makes the back light go on and the screen itself doesnt seem to turn on. The phone seems to function "as normal" - it even reboots fine - until I have to turn the screen on using the power button after initially booting it up.
LightinDarkness said:
I did all that and everything went through, same problem though after reboot - once the screen turns off, hitting the power button only makes the back light go on and the screen itself doesnt seem to turn on. The phone seems to function "as normal" - it even reboots fine - until I have to turn the screen on using the power button after initially booting it up.
Click to expand...
Click to collapse
If that's still the case, I'd try to boot into download mode and flash a stock rom (as was suggested above).
Hi guys, I am encountering the same problem as the guy mentioned underneath in this post, to which some forum users suggested holding the power + vol down to reboot the phone. However, when I tried to do so, the light of the back and home buttons started flashing instead of the phone rebooting. Would anyone happen to have a solution to the problem I am facing?
Originally Posted by mjfh81
Hi guys,
I've been loving my HTC ONE since finding Android Revolution HD and have never had any issues with the installation process. I downloaded 12.2 and went through the usual process and this time I chose to wipe user data only instead of clearing the previous ROM.
I went through the set up screen of Aroma as usual and ticked the options that I have always done but this time the installer is stuck at 0% for well over 2 hours now. The green bar still moves at the bottom but nothing has happened aside from that.
Whats the best way to get out of, what appears to be a frozen installation process? Is it best to just let the phone's battery run down or should I try to force quit the set up process?
Thanks
donkiez said:
Hi guys, I am encountering the same problem as the guy mentioned underneath in this post, to which some forum users suggested holding the power + vol down to reboot the phone. However, when I tried to do so, the light of the back and home buttons started flashing instead of the phone rebooting. Would anyone happen to have a solution to the problem I am facing?
Originally Posted by mjfh81
Hi guys,
I've been loving my HTC ONE since finding Android Revolution HD and have never had any issues with the installation process. I downloaded 12.2 and went through the usual process and this time I chose to wipe user data only instead of clearing the previous ROM.
I went through the set up screen of Aroma as usual and ticked the options that I have always done but this time the installer is stuck at 0% for well over 2 hours now. The green bar still moves at the bottom but nothing has happened aside from that.
Whats the best way to get out of, what appears to be a frozen installation process? Is it best to just let the phone's battery run down or should I try to force quit the set up process?
Thanks
Click to expand...
Click to collapse
Keep holding the power button down until the phone reboots, takes a while sometimes. Power and volume down might work also. Holding the phone under a bright light and holding down the power and volume down button is another option.
Once you reboot, just try installing ARHD again...
I don't think hes going to be able to get out of it with the power button, he should use the toolkit to force a reboot. Thats will work 100% of the time.
seh6183 said:
I don't think hes going to be able to get out of it with the power button, he should use the toolkit to force a reboot. Thats will work 100% of the time.
Click to expand...
Click to collapse
toolkit? all you need to do is adb reboot
Is it plugged into a charger?
If it is, unplug it.
dgtiii said:
Keep holding the power button down until the phone reboots, takes a while sometimes. Power and volume down might work also. Holding the phone under a bright light and holding down the power and volume down button is another option.
Once you reboot, just try installing ARHD again...
Click to expand...
Click to collapse
seh6183 said:
I don't think hes going to be able to get out of it with the power button, he should use the toolkit to force a reboot. Thats will work 100% of the time.
Click to expand...
Click to collapse
toolkit? adb reboot?
bright light and power button. that easy
Bright light and power button......works every time! Haha!