Database Develop

[KERNEL] R3 - OC 1500mhz/EXT4/CIFS/GPU OC from stock LG kernel (2.6.32.9)

Hi guys!
This kernel is for stock/MCR ROMs only. I've tried to combine all the best bits from existing kernels into this one. This is based on the stock LG kernel.
First of all special thanks to Benee/Cpujuste since a lot the changes are from their kernels.
Features of the kernel:
* OC to 1500 mhz (minimum is 500 mhz but if you don't change it 300 mhz will work)
* GPU/AVP/VDE have been overclocked
* noop I/O scheduler
* Disabled all LG debugging messages
* 64 mb hack
* EXT4/CIFS built into the kernel
Few other misc changes to the kernel config. This is my first kernel so take it easy on me
Download:
[Release 1]
http://www.mediafire.com/?9g08udzg0d21fmj
[Release 2]
http://www.mediafire.com/?szkweyakk691wx2
[Release 3]
http://www.mediafire.com/?7z7rcw6x136pcaj

Release 3
=======
- Fixed wifi thering
- Updated voltages/speeds a little bit so there aren't any > 100mv jumps as before
- Added multicast support
Release 2
=======
- Reduced AVP/VDE clock speeds
- Changed voltage/cpu tables to:
389 mhz ]
503 mhz ]
655 mhz ] Stock LG voltages/speeds
760 mhz ]
1015 mhz ]
1216 mhz - ] For overclocking
1408 mhz - ] Default voltages are higher
1504 mhz - ]
Release 1
=======
- Initial Release

testing, hope you can release source code someday
info :
testing with FR18, stuck at LG logo...

do i need to make a wipe or wil this do it for me?

smokeweedevery said:
do i need to make a wipe or wil this do it for me?
Click to expand...
Click to collapse
no need to wipe when installing new kernel ...

ok thank

applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
3.) videorecording with camera mod works fine @ highest settings
4.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
5.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k.,
If it´s stable the next 10hrs, i think i will stay with this one, thx !
--------------------------------------------
bugs i found yet :
bootanimation is interrupted when starting 2.nd or 3.rd time (not a big problem)
O2X reboot is not working (reboot & reboot recovery) , or is it because of new CWM recovery 4.0.0.2. ?
tethering not working (tried wifi)

somebody tested the tethereing options with this kernel?

75markus said:
applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
2.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
3.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k., couldn´t find any bug yet...
If it´s stable the next 10hrs, i think i will stay with this one, thx !
Click to expand...
Click to collapse
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?

will this work on stock?

fajarep said:
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?
Click to expand...
Click to collapse
i used MCK kernel r14 without RAM hack before ...

smokeweedevery said:
will this work on stock?
Click to expand...
Click to collapse
This kernel is for stock/MCR ROMs only.
Click to expand...
Click to collapse
i guess so?

peewster said:
somebody tested the tethereing options with this kernel?
Click to expand...
Click to collapse
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...

Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...

75markus said:
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...
Click to expand...
Click to collapse
All the froyo kernels with ramhack and oc have tethering issues, so it seems....
Sent from my Optimus 2X using XDA App

Kenchitech said:
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
Click to expand...
Click to collapse
just do a nandroid backup first, when you choose advanced restore, you can only restore kernel if you want, but i would advise you to make full restore if you need to, cause one module (wireless.ko) seems also different ...

not working on stock rom. cant boot

just had some freeze when playing aroung with pimpmycpu, selecting different scheduler & undervolting,next reboot ended in bootloop -> reverted to MCK r14 ...
seems to be more stable at the moment ...

same here
smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
same here. freeze at LG logo.

smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
Clean dalvik cache?

[q] gingerdx overclocking

i installed gdx v009 and overclocked it and set the setcpu to 729 Mhz - 122 Mhz. i'm having some trouble sometimes my phone just automatically reboot by it self... is there a way to fix this? or should i uninstall overclock and run it on stock ram. have anyone of you tried this kind of setup? any answers/reply or comments are welcome. please. thanks in advance.

Try lowering your Overclock.
I've heard that some people had reboot problems with OC (but not only in this ROM).
Mine is 122-691Mhz with GingerDx.008 and its okay.

BITOx said:
Try lowering your Overclock.
I've heard that some people had reboot problems with OC (but not only in this ROM).
Mine is 122-691Mhz with GingerDx.008 and its okay.
Click to expand...
Click to collapse
Realy? What seems to be the problem on my unit.... maybe i should set my setcpu setting the same way you did... how about supercharger script have you tried? I brick my phone twice trying that supercharger.

Nope. I didn't try to use supercharger.
I've read that when we want to OC, we should try the different CPU speeds gradually.
Increase a bit and then see if the phone handles it... then increase a bit more... when the reboots or other problems start, we know which frequence we should use.
But the frequence is not the same for every CPUs... The phone is the same, but not every CPUs handle the same... We can be lucky and get it to 800Mhz without problems... but not everyone has that lucky.

edward091810 said:
i installed gdx v009 and overclocked it and set the setcpu to 729 Mhz - 122 Mhz. i'm having some trouble sometimes my phone just automatically reboot by it self... is there a way to fix this? or should i uninstall overclock and run it on stock ram. have anyone of you tried this kind of setup? any answers/reply or comments are welcome. please. thanks in advance.
Click to expand...
Click to collapse
i am using ginger dx 009v and overlocked upto 729mhz but doesn't experienced any problem

mabdullah007 said:
i am using ginger dx 009v and overlocked upto 729mhz but doesn't experienced any problem
Click to expand...
Click to collapse
Good for you, now i reduce the speed and set it to 729 mhz still under observation i hope this will fix the problem...
Sent from my X8 using XDA App

Hi all,
any idea why I get no options to set min. and max. CPU frequencies in CPU settings? I am using GingerDX v011 and had the same problem in v010.
I can open the "Max CPU frequency" option, but it is empty with no available frequencies to choose...
Thank you

For using something exactly like supercharger, use the stuff in this thread: http://forum.xda-developers.com/showthread.php?t=1212396&page=14
Each phone can OC to a different max frequency, for example I can't OC to 825 MHz but I know some people can.

steevensk said:
Hi all,
any idea why I get no options to set min. and max. CPU frequencies in CPU settings? I am using GingerDX v011 and had the same problem in v010.
I can open the "Max CPU frequency" option, but it is empty with no available frequencies to choose...
Thank you
Click to expand...
Click to collapse
I believe GingerDx does not ship with the X8Overclock module...

Hello:
I wanna know: is it possible to do overclock in gingerDX-v011 ?
I found a option but they are blocked

yes it is possible but you need to download X8overclock v004. you will find this in DX's signature, just click the link read the guide download and stick it on your phone where he tell's you to. then go back to W/E it is you use to OC then the option's aint blocked anymore.
Here is the link http://forum.xda-developers.com/showthread.php?t=1188486 click that go to bottom of one of dx's post's in his signature click the X8overclock v004 link. FOLLOW instruction's. DONE
Hope i help'd
If so please Click " THANKS "

Im on gingerdx v018 with undervolt modules(stock kernel), when I try to overclock my phone, it become very unstable(very laggy).. Do I have to remove the underclock module? If so can I just remove the module from the module folder.. thanks in advance!

As far as I know undervolt module causes phone instability when it's overclocked, try to remove that module (undervolt) and see what will happen. You can remove just by removing it from module folder and (I'm not sure but) you have to also remove line from hw_config which contains that module.

I am also using GingerDX overclocked at 710Mhz with undervolt but no problem for me so far

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

[Q]Overclock

Is there a overclock already or is anyone working on it?
Is this cpu overclockable ? And how much ?

meddistar said:
Is there a overclock already or is anyone working on it?
Is this cpu overclockable ? And how much ?
Click to expand...
Click to collapse
up to 1.2 ghz but not sure if there is a kernel for gb. on froyo though you can go up to that number safely

Maybe something changed since then..
Is there a way to overclock the OB on GB?

No, new nova kernel promised oc but it is delayed.

Zeus v6 has one
Sent from derp-mobile

Yes with zeus you can but use with caution the overclock is bad for android you reduce the life time of phone
Sent from LG-P970

i'm running zeus v6 right now..
going to try the overclock, just for fun..
already tried 1100 mhz, nice increase on benchmark but the feeling is the same..
just going to try some speeds but will probably stay on safe speed.

I did overclock with zeus V6 up to 1.2 GHz, but the maximum is 1.3 ghz, but not appropriate to use this speed, I think ...
But the difference is not much.

With oc and antutu i've 2997 score
Sent from LG-P970 using zeus v6 1,1Ghz

Guys I'm quite new to oc, previously I just tried it in nova so I just want to ask if it can do some to damage to the phone on long term basis? Or basically it is safe as long as you stay in the safe range ( 1.1-1.2)?

processor
U used nova for some time and i even overclocked mine to 1.2 after i used cm7 for a long time and about 3 monts ago my phone sudendly dont pass of LG logo i tried everything including kdz method and nothing work, i send it to warranty when he came the girl of the store say he just got a new processor, the old one didn t work, since that day i think a lot before overclock him again

You must verify the temp (°c) before o/c when the phone is too hot the o/c damage it. And i think 1,2Ghz isn't very stable.
Sorry for my english ,i'm french
Send with Zeus v6 the lightning power in you're P970

If you're on zeus go to Terminal Emulator then type su to gain superuser access, now type zeus and there it is the Zeus Script, there you can overclock and do other tweaks to your phone.
Hope it helps!

champzzz said:
If you're on zeus go to Terminal Emulator then type su to gain superuser access, now type zeus and there it is the Zeus Script, there you can overclock and do other tweaks to your phone.
Hope it helps!
Click to expand...
Click to collapse
thank you but the answer was already given..

koila33 said:
I did overclock with zeus V6 up to 1.2 GHz, but the maximum is 1.3 ghz, but not appropriate to use this speed, I think ...
But the difference is not much.
Click to expand...
Click to collapse
i think personally the maximum to oc zeus v6 would be up till 1250, i tried pushing it to 1300 and got bootloop

Did anyone already set it to lets say 1.2 ghz, then reboot a couple of times, since dvfs should set higher voltages then and then set an even higher frequency? Maybe this would allow you, to go even higher
Sent from my LG-P970 using Tapatalk

niko34 said:
With oc and antutu i've 2997 score
Sent from LG-P970 using zeus v6 1,1Ghz
Click to expand...
Click to collapse
with v20o stock rom with deleted bloatwares, my antutu score is 2550 -2600...
dont ask for quadrant... haha

mdfaisal said:
with v20o stock rom with deleted bloatwares, my antutu score is 2550 -2600...
dont ask for quadrant... haha
Click to expand...
Click to collapse
yeah but with 1.2ghz i guess i saw someone having 3300+
since i got a bootloop, i stopped oc-ing
(will try in holidays)

I have it overclocked to 1180 with zeus v6, higher values make my phone to reboot and crash apps. My best score in antutu is 3038.

[kernel] Overclocked ICS 3.0.8 kernel v0.1 (for 4430 only) with tun.ko

Hi All,
Here is a first release of my overclocked kernel.
This kernel enables 1.1 - 1.5 Ghz cpu frequencies in cpu governor.
- 1.1 and 1.2 are with Archos stock voltage
- 1.3, 1.4 and 1.5 are with a slight increase of voltage: 1.4V instead of 1.388V
Usual disclaimer: I'm not responsible if you fry your tablet with this kernel, I don't recommend overclocking at all.
I'm personally a bit against it but as many are interested, here it is. My tablet is apparently very stable at 1.2. 1.3 works a little but eventually crashes. Without voltage increase, 1.3 crashes very early.
Instructions:
- Flash this kernel in recovery along with your build initramfs
- Enable overclocked frequency with your favorite tool (setcpu, cpu boost, system tuner).
- If overclock crashes your tablet, power off with a long press (more than 10 seconds) on power button, then you can power on again and try lower overclock.
By default, this kernel boots at 1.0 Ghz to avoid any issue. I don't recommend using it on 4460, it won't bring you anything.
I also enabled tun.ko if anyone needs it.
Let me know how it runs for you!

letama said:
Hi All,
Here is a first release of my overclocked kernel.
This kernel enables 1.1 - 1.5 Ghz cpu frequencies in cpu governor.
- 1.1 and 1.2 are with Archos stock voltage
- 1.3, 1.4 and 1.5 are with a slight increase of voltage: 1.4V instead of 1.388V
Usual disclaimer: I'm not responsible if you fry your tablet with this kernel, I don't recommend overclocking at all.
I'm personally a bit against it but as many are interested, here it is. My tablet is apparently very stable at 1.2. 1.3 works a little but eventually crashes. Without voltage increase, 1.3 crashes very early.
Instructions:
- Flash this kernel in recovery along with your build initramfs
- Enable overclocked frequency with your favorite tool (setcpu, cpu boost, system tuner).
By default, this kernel boots at 1.0 Ghz to avoid any issue. I don't recommend using it on 4460, it won't bring you anything.
I also enabled tun.ko if anyone needs it.
Let me know how it runs for you!
Click to expand...
Click to collapse
great, i'll test it
I report if it works
btw. what did you change in the sources, did you just added the frequencies ?

djnilse said:
btw. what did you change in the sources, did you just added the frequencies ?
Click to expand...
Click to collapse
Yes, with voltage, and removed 1.2 ghz soc check. See attached diff of all changes.

Bonjour et Merci
Fonctionne a merveille sur archos 80g9 jusqu'a 1200 mhz.
encore merci

what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??

ICXPlay said:
what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??
Click to expand...
Click to collapse
nope there are the omap 4430, which runs at 1,0 GHz
and the omap 4460, which runs at 1,5 GHz
for last mentioned overclock to 1,5 GHz doesn't make any sense

ICXPlay said:
what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??
Click to expand...
Click to collapse
Only Turbo models have Omap4460 which runs @1.5GHz by default. Other models use Omap4430- 1.2GHz max

lol, yes
i just woke up
i thought i had a 4460 it is a 4430
Edit:
Did you include a autoroot methode in your kernel???

letama said:
Yes, with voltage, and removed 1.2 ghz soc check. See attached diff of all changes.
Click to expand...
Click to collapse
thank you, so in theory it could go even higher ?
what value defines the volt ?
the 1400000
Code:
+#define OMAP4430_VDD_MPU_OPPNUCLE_UV [B]1400000[/B]
or the 0x29 ? :
Code:
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNUCLE_UV, 0, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, [B]0x29[/B], OMAP_ABB_FAST_OPP),

after flashing this i can't enter sde anymore
when i enter sde i just reboot ?
Edit: working now
i need to hold power button and then select developer then release power button and it boots in developer recovery

wow! working great on my 80 G9! thanks letama

My tablet (archos 101 g9) is unlucky with overclcok, at 1200MHz (standard "hotplug" governor) passes all benchs like antutu, quadrant etc. but after a while, "go launcher ex" is refreshed infinitely. at 1300Mhz passes benchs but launching x-plane (flight simulator game) tablet crashes. maybe in my case is necessary overvolt even at 1200mhz. I usually have luck with the phones overclocking... patience! thank you and sorry for my poor englis

Letama, for tun.ko, do u just copy that to the drive along with zimage and initramfs

Shano56 said:
Letama, for tun.ko, do u just copy that to the drive along with zimage and initramfs
Click to expand...
Click to collapse
No, you should boot Android and copy it to /lib/modules through adb or a root file explorer.

hitman72 said:
My tablet (archos 101 g9) is unlucky with overclcok, at 1200MHz (standard "hotplug" governor)
Click to expand...
Click to collapse
Did you try 1100 ?

ICXPlay said:
Did you include a autoroot methode in your kernel???
Click to expand...
Click to collapse
No, it's not really useful with SDE imho.

djnilse said:
thank you, so in theory it could go even higher ?
Click to expand...
Click to collapse
Yes, but I doubt it would be any use except if you open tablet and watercool it
what value defines the volt ?
the 1400000
Click to expand...
Click to collapse
Yes
or the 0x29 ? :
Click to expand...
Click to collapse
I didn't check this one deeply, but it seems related to tolerance in voltage, I have to look deeper. It seems to play a role in raising tensions, so it could be useful to modify value there.
I did this overclock quickly, I'm out of free time these days, but I'm sure overclock addicts could get better results with fine tuning.

hi, at 1100mhz tablet (archos 101 g9) seems stable, better than nothing thank you again. ciao

First of all thanks for the OC kernel! It works perfect with surdu_petru's first ROM. Unfortunately it does not work with his latest ROM, the deodexed version. The touchscreen does not work at all.
Any thoughts or ideas on that? Will there be an updated version of this kernel?
Thanks in advance!

JayVee said:
First of all thanks for the OC kernel! It works perfect with surdu_petru's first ROM. Unfortunately it does not work with his latest ROM, the deodexed version. The touchscreen does not work at all.
Any thoughts or ideas on that? Will there be an updated version of this kernel?
Thanks in advance!
Click to expand...
Click to collapse
Can you give me a dmesg quickly after boot ? It could be modules that are not loading or something else.