Related
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400
My x8 freezes at bootup, I can't even go into xrecovery anymore xo
please help me, it's urgent!!
this post sounds to me like this: "my phone no work help !!!11"
could you be so kind sir and give us more details?
you tried to flash a kernel? a ROM? did your phone drop over a cliff and does not start?
you want us to guess?
does the SONY ERICSSON white logo appear?
bludsugah said:
My x8 freezes at bootup, I can't even go into xrecovery anymore xo
please help me, it's urgent!!
Click to expand...
Click to collapse
Well, there are tons of topics that talks about bricking. You could check some of them in order to see how other people have solved this problem.
There is also a guide in this forum that might help you:
http://forum.xda-developers.com/showthread.php?p=12442257
If you can't boot in xRecovery mode, you could try to repair the phone using PC Companion.
ATTENTION: Using restoring applications may cause data loss.
1.Download flashtool
2.Download stock rom image from http://www.multiupload.com/XLV6AA41DB
3.Download baseband suitable to your phone from (http://www.mediafire.com/?d3pobqqc3py66)
4.Place both files to flashtool/firmwares folder
5.Install drivers from flashtool/drivers folder
6.(Dont connect your mobile to pc),Now click flash in flashtool and flash rom first
7.Flash baseband
8.Disconnect and restart
9.Done
bludsugah said:
My x8 freezes at bootup, I can't even go into xrecovery anymore xo
please help me, it's urgent!!
Click to expand...
Click to collapse
reflash phone with SEUS or use flashtool
bludsugah said:
My x8 freezes at bootup, I can't even go into xrecovery anymore xo
please help me, it's urgent!!
Click to expand...
Click to collapse
Turn off your xperia than open SE PC COMPANION or update service program. And update your phone again to 2.1! How to connect phone Take battery out, connect usb cable to pc and phone and hold back button on xperia x8 and insert battery.
use seus , best repair method.
where i can get seus or flashtool ???
thx..
guys, if let's say i installed a custom rom, and without having the kernel which is needed for the rom and i cant get into recovery mod, is there anyway to repair this? and also i didn't unlock the bootloader.. any help?? please? one more thing, the debugging mode is off. so i can't transfer files through flashtool. That happens because the custom rom cannot be booted up and therefore i cant select debugging mode on~
Madarao said:
guys, if let's say i installed a custom rom, and without having the kernel which is needed for the rom and i cant get into recovery mod, is there anyway to repair this? and also i didn't unlock the bootloader.. any help?? please? one more thing, the debugging mode is off. so i can't transfer files through flashtool. That happens because the custom rom cannot be booted up and therefore i cant select debugging mode on~
Click to expand...
Click to collapse
My fellow Malaysian, just which ROM you are trying to install? many custom ROMs doesn't need custom kernel, so you don't have to install and unlock the bootloader!
Since you have installed the custom kernel( assuming it required the custom kernel), use flashtool to install the custom kernel for it to work!
Please remember for custom kernel like aNa, you need to unlock the bootloader, pls check the date of manufacturing first, Otherwise you may break your phone
saintckk said:
My fellow Malaysian, just which ROM you are trying to install? many custom ROMs doesn't need custom kernel, so you don't have to install and unlock the bootloader!
Since you have installed the custom kernel( assuming it required the custom kernel), use flashtool to install the custom kernel for it to work!
Please remember for custom kernel like aNa, you need to unlock the bootloader, pls check the date of manufacturing first, Otherwise you may break your phone
Click to expand...
Click to collapse
Thanx, yes it is for the naa kernel thingy~ thanx for the help~ now i've figured it out~ =D
HOW FIX THIS PROBLEM?
http://www.youtube.com/watch?v=LKTBOJNNNOM&feature=mfu_channel&list=UL
KR470S said:
HOW FIX THIS PROBLEM?
http://www.youtube.com/watch?v=LKTBOJNNNOM&feature=mfu_channel&list=UL
Click to expand...
Click to collapse
You have started two same thread on the same problem! Which version of aNa kernel and ROM you are using? Can you go into the Recovery with BACK button?
If so, do a full wipe and install the ROM again with the custom zip files from SDcard.
Please let us have more details so you could help you better!
saintckk said:
You have started two same thread on the same problem! Which version of aNa kernel and ROM you are using? Can you go into the Recovery with BACK button?
If so, do a full wipe and install the ROM again with the custom zip files from SDcard.
Please let us have more details so you could help you better!
Click to expand...
Click to collapse
Yes with back button enter in Recovery and I did full wipe and instal CM7 ROM with custom zip file from SDcard and nothing.
PS: Official rom 2.1 and aNa Kernel v10
KR470S said:
PS: Official rom 2.1 and aNa Kernel v10
Click to expand...
Click to collapse
Well, and you wonder why it "dies" at the attempt to boot?
The STOCK ROM does NOT work with nAa or Alfs!
Now go and flash MiniCM7 or restore the Stock Kernel and keep on improving your knowledge before running free and messing up.
B.Jay said:
Well, and you wonder why it "dies" at the attempt to boot?
The STOCK ROM does NOT work with nAa or Alfs!
Now go and flash MiniCM7 or restore the Stock Kernel and keep on improving your knowledge before running free and messing up.
Click to expand...
Click to collapse
KR470S Ah Yo! please read the first page of any kernel or rom, to see the requirement, loh! Failure of which, may permanently brick your phone!
saintckk said:
Ah yo! please read the first page of any kernel or rom, and see what is the requirement, loh! Failure of which, may permanently brick your phone!
Click to expand...
Click to collapse
Thank you for pointing out the obvious saintckk - pure words of wisdom many seem to ignore.
saintckk said:
KR470S Ah Yo! please read the first page of any kernel or rom, to see the requirement, loh! Failure of which, may permanently brick your phone!
Click to expand...
Click to collapse
I read all page with kernel and rom and nothig. Not work anything I do.
Go to PC Companion > Support zone > Phone Software Update > repair phone.
Everytime i bricked my phone i rescued it this way, it may work for you too
KR470S said:
I read all page with kernel and rom and nothig. Not work anything I do.
Click to expand...
Click to collapse
What saintckk wanted to say is this ...
If you look at the thread title of nobodyAtall's Kernel thread it reads:
[KERNEL] nAa-10 [28/1/12] Custom Gingerbread kernel + CWM Recovery
You notice the "Gingerbread" I made bold?
Android 2.1.x --> Eclair
Android 2.2.x --> Froyo
Android 2.3.x --> Gingerbread
Android 3.x.x --> Honeycomb
Android 4.0.x --> Ice Cream Sandwich
Since the thread title points out that the kernel is intended to be used with Gingerbread ROMs you can't use it with older Android versions.
But that's just half the story.
Not every 2.3.x (aka "Gingerbread") custom ROM will actually work with every custom Kernel.
For example:
GingerDX runs on Stock Kernel, Alfs or Linux DX
MiniCM7 runs best on nAa ONLY
This means you have to use a befitting kernel for the ROM of your choice. The supported Kernels of a ROM are either noted down in the thread title or somewhere in the 1st post.
The simple fact is that the 2.1 STOCK ROM does NOT work with custom kernels at all as it has never been made to run on a custom kernel.
Note: I'm ignoring the fact here that lrakkarl's FroyoPro can also run on Alfs.
That being straightened out ...
To resolve your problem do as I wrote above. Either flash MiniCM7 (v2.1.8) or flash back the stock kernel and stay on the stock ROM.
Again: The Stock ROM does NOT work with custom kernels!
NO.... I try of 5 hours and nothing I can fix this... X(
Well...
To flash MiniCM7 (requires "adb" as you're stuck at boot AND some knowledge about how to do it):
- Download the ZIP of the ROM
- Connect your X8 to the Computer by using the USB cable
- Turn on the phone and once the SONY ERICSSON logo appears keep on tapping onto the screen to get into CWM.
- "Mount SD-card"
- adb connect
- adb push C:\path\to\MiniCM7.zip /sdcard
- Flash MiniCM7 from your SD card
- Full Wipe
- Reboot
The other way would be as hrvoje334 pointed out above ...
Flash back to Stock and retry from there.
B.Jay said:
What saintckk wanted to say is this ...
If you look at the thread title of nobodyAtall's Kernel thread it reads:
[KERNEL] nAa-10 [28/1/12] Custom Gingerbread kernel + CWM Recovery
You notice the "Gingerbread" I made bold?
Android 2.1.x --> Eclair
Android 2.2.x --> Froyo
Android 2.3.x --> Gingerbread
Android 3.x.x --> Honeycomb
Android 4.0.x --> Ice Cream Sandwich
Since the thread title points out that the kernel is intended to be used with Gingerbread ROMs you can't use it with older Android versions.
But that's just half the story.
Not every 2.3.x (aka "Gingerbread") custom ROM will actually work with every custom Kernel.
For example:
GingerDX runs on Stock Kernel, Alfs or Linux DX
MiniCM7 runs best on nAa ONLY
This means you have to use a befitting kernel for the ROM of your choice. The supported Kernels of a ROM are either noted down in the thread title or somewhere in the 1st post.
The simple fact is that the 2.1 STOCK ROM does NOT work with custom kernels at all as it has never been made to run on a custom kernel.
Note: I'm ignoring the fact here that lrakkarl's FroyoPro can also run on Alfs.
That being straightened out ...
To resolve your problem do as I wrote above. Either flash MiniCM7 (v2.1.8) or flash back the stock kernel and stay on the stock ROM.
Again: The Stock ROM does NOT work with custom kernels!
Click to expand...
Click to collapse
With anything Kernel and ROM I try to use don't work. I don't know what can I do.
KR470S said:
With anything Kernel and ROM I try to use don't work. I don't know what can I do.
Click to expand...
Click to collapse
Ok ...
Download Flashtool
Download the Stock Kernel FTF
Download the Stock 2.1.1.C.0.0 Stock ROM FTF
Put the ftf files into the "firmwares" directory inside the Flashtool directory.
Start Flashtool
Click the "Flash" button and select the kernel ftf.
In the next window don't do anything, just click "OK"
Flashtool will now tell you to ...
- TURN THE PHONE OFF
- Press the Back button and keep it pressed
- Connect the phone to the computer
Once you see that flashtool recognized the phone and started to flash the kernel you can release the back button.
Repeat the procedure a second time, but this time you select the ROM FTF.
Once that's done you're back on the Stock Kernel and Stock ROM.
From there you need to root the phone again and either install xRecovery or Dual Mode recovery (to have xRecovery AND CWM).
You may also try with PC Companion instead of Flashtool, but in case PC Companion tells you to take a hike you need to go down the Flashtool route.
B.Jay said:
Ok ...
Download Flashtool
Download the Stock Kernel FTF
Download the Stock 2.1.1.C.0.0 Stock ROM FTF
Put the ftf files into the "firmwares" directory inside the Flashtool directory.
Start Flashtool
Click the "Flash" button and select the kernel ftf.
In the next window don't do anything, just click "OK"
Flashtool will now tell you to ...
- TURN THE PHONE OFF
- Press the Back button and keep it pressed
- Connect the phone to the computer
Once you see that flashtool recognized the phone and started to flash the kernel you can release the back button.
Repeat the procedure a second time, but this time you select the ROM FTF.
Once that's done you're back on the Stock Kernel and Stock ROM.
From there you need to root the phone again and either install xRecovery or Dual Mode recovery (to have xRecovery AND CWM).
You may also try with PC Companion instead of Flashtool, but in case PC Companion tells you to take a hike you need to go down the Flashtool route.
Click to expand...
Click to collapse
When I do this need to have Unlocked bootloader?
KR470S said:
When I do this need to have Unlocked bootloader?
Click to expand...
Click to collapse
Since you obviously didn't unlock your boot loader but just flash MiniCM7 - no, I take your boot loader should even still be locked, right?
If you didn't touch the boot loader and NOT flash a custom kernel...
Just download Flashtool and the Stock ROM FTF to recover your phone back to Stock 2.1
B.Jay said:
Since you obviously didn't unlock your boot loader but just flash MiniCM7 - no, I take your boot loader should even still be locked, right?
If you didn't touch the boot loader and NOT flash a custom kernel...
Just download Flashtool and the Stock ROM FTF to recover your phone back to Stock 2.1
Click to expand...
Click to collapse
OK I do all this now if I want to install CM7 rom what I have to do?
Reroot, install CWM again and flash the ROM of your choice.
hrvoje334 said:
Go to PC Companion > Support zone > Phone Software Update > repair phone.
Everytime i bricked my phone i rescued it this way, it may work for you too
Click to expand...
Click to collapse
You can't do this on custom kernel
I flashed the latest official firmware...
Than after all my attempts i can't install any ROM, except official 2.1.
Please, write me instructions how to install CM7 - i need help...
I have rooted 2.1 with xRecovery - what's next?
Go to xrecrovery choose instal custom zip from sd card hoose zip from sd card find your mini cm 7 install rom and factory reset/full wipe.
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Bolussimo said:
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Click to expand...
Click to collapse
Also, some ROM required CWM instead of Xrecovery, so read carefully before attempting anything.
Hmmmm
I unlocked bootloader long time ago(10WW48 on the sticker).
to przemek4113: Just installing from xrecovery gives me a unbooting phone.
I tried Froyo, but it doesn't boot too.
Then i'm flashing(Xrecovery doesn't give me a booting phone even if i recover all system) official 2.1.
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
May be try Previous versions of GingerDX?
Really, i tried about seven customs...
P.S. I'm installing xrecovery ROM's from Xrecovery and CWM ROM's from CWM...
BEaStia said:
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
Click to expand...
Click to collapse
Mind to elaborate where you read that "latest versions need new kernels"?
GingerDX runs on STOCK KERNEL, LinuxDX as well as Alfs. I fail to find the part in doixanh's post where it says something about forcing a certain kernel to be used.
Make sure you have an older x8 than 11w29, its under the battery. When the number is 11w29 or newer, you'll not get CM. Unlock your bootloader.
Download and flash FXP kernel. Install official CM with the kernel built-in CWM. I recommend to flash nAa kernel after install the CM, it's much better.
Sent from my E15i using xda premium
If you want CM7 you should go to this thread...http://forum.xda-developers.com/showthread.php?t=1362585
That's my fault - i was speaking about another ROM. Not GingerDX - but it doesn't boot too.
I followed advise about miniCM7.
Flashed kernel ->then wiped all(i disliked the message about ext4 - there's no this partition - probably that's the problem???) ->installed ROM. Nothing.
"nAa kernel" logo appears and then it reboots.
UPD:
I've installed GingerXperia(v19) via CWM.
Then -
I've flashed all kernel,fota and smth else(not all files from 2.1.1).
Then it booted...strange)
But i'll try to work with other kernels...
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
sreeramllb said:
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
Click to expand...
Click to collapse
Probably:
1)make a backup of all data
2)flash stock kernel
2.5)wipe
3)install custom
3.5)wipe
4)recover data
?
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
sreeramllb said:
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
Click to expand...
Click to collapse
Flash Tool - I've seen links on it thousand times on 4pda.ru, but not here - i suppose it to be in the branch about X10.
http://www.mediafire.com/?z7fmpiragbbdxdu - here is flasher.
http://depositfiles.com/files/c2gllgt6t - or here, with official firmware
It would be great if somebody could provide the step by step procedure of flashing my w8 to get past the se logo....
1)Download all archives above
2)Run flasher
3)Press "Flash" and choose necessary firmware
4)follow advices of software
5)reboot -> You have official 2.1
then
1)check your bootloader(http://4pda.ru/forum/dl/post/1227710/S1tool.7z) with this tool
2)unlock it if it is able for you
3)take root(superoneclick with debugging)
4)make xrecovery
5)install any xrecovery zip
or
alt 5)make CWM
alt 6)install any CWM zip
or
install kernel
then install zip
Firstly try it from xrecovery. If you have some problems - write PM to me)
I have done it and successfully flashed as per flashtool...but now even i cant boot stuck at "sony ericsson" now the animated logo works and reboots automatically...pls help
Have you done "user-wipe" in Flash Tool???
Here is from friendly branchcontains a collection of GingerDX 013-022 and some other goodies in the "Sony Ericsson" folder - i.e. Basebands, PCC, SEUS, Flashtool)
http://www.mediafire.com/?eca0sualnao4c4c
Thanks to B.Jay
Atlast with full user data wipe in flash tool I recoverd my phone...THANKS A LOT!!!
Again rooted,Xrecovery and installed GX V24b-I would like to know how to enable multi touch in it please?
How to make xperia x8 able multi touch.
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
chehady said:
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
Click to expand...
Click to collapse
Ok here is a nice way how to enable it hope it helps you
http://forum.xda-developers.com/showthread.php?t=1135965
Sent from my E15i using XDA App
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.