Database Develop

[Q] Nexus One not working with the Bell Mobility network either voice or data?

I just received my Nexus One which I ordered through the Google Developer program (Brightstarcorp) and I'm not able to get it working with the Bell Mobility network for either voice or data
I have a signal bars on my N1 with a Bell Mobility SIM card but it dosen’t works.
When I slide down the notification bar it say "Bell" and try this to get it working.
I have tried all solutions and have the recommended settings on the phone (also running Froyo 2.2.1-Build number : FRG83).
- I tried my SIM to another Bell phone and it works.
- I tried another Bell SIM in my N1 and it did not work.
- I'm using an active data plan card not a prepaid card.
But it works with Rogers or Fido
I tried the following :
1.Go to Settings -> Wireless & Networks -> Mobile Networks -> Network Operators: after about 1 minute I see network the currently available Bell
I click on Bell and see a signal not working.
2. Go to the dialer and type in *#*#4636#*#* this bring a hidden menu
3. tap on "Phone Information" It list the current network as Bell and also showing the IMEI and the Phone number. The IMEI and phone number are correct.
4. Hit the menu button and press "Select radio band" and click on "Automatic" .
5. Still not working I make sure radio band is set to "Automatic" then go back to the previous screen and scroll all the way to the bottom. Click under "set preferred network type" and choose through until I find one that works 1. WCDMA preffered or WCDMA only or GSM auto (PRL) it takes a few seconds from the time I click until the settings take place, just watch the signal bar at the top of the screen until it changes. Even try the "unknown" network type at the bottom of the list if the others don't work.
All the above fails.
For those of you out there who have successfully activated the Nexus One on the Bell network could you let me know which version of the phone you have.
Thanks for your suggestions.

well i am sorry to say but i dont think that the phone will work with Bell. the dev phones as far as i know are all AWS. so the only way it is going to work is if you get a rogers sim and use it on edge or a wind/moblicity sim and you can use 3G. bell does not have an edge network to back up on.

That's true. Bell/Telus has only the 3g network. The developer phone will not work. It will use edge/2g on Rogers/Fido. And will be fully supported on Wind or Mobilicity.

Nexus One with a Bell Mobility it dosen’t works!!
About Videotron?
Thanks

Cannot enable "Mobile network" after upgrade to latest FW

Hello,
i've just upgraded to the latest official OTA FW 3.08.405.3
Sense3.0 is great, but i cannot turn on mobile network anymore - i tried it both via Quick settings and Wireless settings menus - it cannot be enabled. And even worts is that it doesn't report any error msg and the 3G sign doesn't appear on status bar. There is noting in the log too...
Does anyone has the same problem?
I just wrote a mail to HTC support, but don't know if they track this as support channel...
This is terrible - i can't live without mobile network connection ...please help!
10x
Boby

This might sound weird, but is there anything in APN setting?

Try to mess with the toggles. I have had similar problem. I constantly turned airplane mode on/off and switched from GSM to WCDMA. Finally it goes, if this isn't related to apn. Hope i helped.

10x a lot guys !
it didn't recover APN settings after upgrade
I previously checked them, and assumed that check-box is selected, but actually it was not. It should be colored in green, but actually it was in grey

Unable to re-enable Mobile Network for data-only SIM Japan -- possible bug?
Having a similar problem, some more details:
PHONE:
I am using an unlocked (but unrooted) Incredible S from Virgin Mobile Canada with a data-only BMobile SIM in Japan (runs on DoCoMo's network apparently). Android 2.3.3 (Virgin Canada circa August 2011).
PROBLEM:
Mobile Network intermittently gets disabled and cannot be re-enabled normally. APN is fine, SIM card (phone number) is still detected. Toggling Airplane Mode or Wireless Network does not work, Select Automatically returns "unable to connect, try again later", Search Networks and choosing DoCoMo returns "Your SIM card does not allow a connection to this network".
SOLUTION:
Only reproducible solution is to remove data-only SIM, insert voice&data SIM (from my SoftBank phone), now Mobile Network is available so re-enable it, power down and replace data-only SIM. Once restarted Mobile Network automatically enables. Obviously this is not a convenient fix.
Once was fixed by randomly hitting network settings in frustration, but I have not been able to reproduce this solution.
OBSERVATION:
When on wireless, Mobile Network is also greyed out. When Wireless Network is disabled, Mobile Network automatically enables properly (for the most part, at least once I suspect it did not).
Thus I feel like it's a bug, either in OS or DoCoMo's network, but BMobile and HTC both point the finger at each other and have no useful suggestions for me.
ASIDE:
I hear Android 2.3.5 is available for Incredible S, perhaps this fixes the problem. However, this update has not appeared in my updater -- is it possible that because I'm unlocked I've lost access to the update server?
Thanks in advance for any suggestions.

mobile network disconnected
Have also the same problem, tried all the above suggestions but none works. Phone only shows limited service but with x on the signal bar. BUt when i try to tap the sim tool kit, it displays "SIM toolkit not ready or unsupported".
Hope somebody here can help me. Thanks

iqbelnas said:
Have also the same problem, tried all the above suggestions but none works. Phone only shows limited service but with x on the signal bar. BUt when i try to tap the sim tool kit, it displays "SIM toolkit not ready or unsupported".
Hope somebody here can help me. Thanks
Click to expand...
Click to collapse
+1

[Q] Cynogenmod on Verizon; SMS and data work, but no voice

Now that you fine folks got s-off working on version 4.4.2 for the HTC One, I was able to put Cyanogenmod on it today. Things seem to work okay, except for the one glaring issue: I can't use the phone to make or get calls. If I look at Settings->About Phone->Status, I get this:
Network - Verizon Wireless
Mobile network type - LTE
Service state - Voiceut of Service / Data: In Service
Roaming - Not roaming
Mobile network state - Disconnected
I suspect that I might have the wrong "Mobile networks" settings in the Settings->Wireless & Networks->More section. For the Preferred network type, I selected "GSM/WCDMA/LTE", but I've tried a few others with no positive effects. For System Select, I'm set to Home Only. If I try to search for available networks, it returns an error and doesn't find any.
Any ideas? Thanks!

I was reading more into this, and people on Sprint found this issue when using Cyanogenmod last summer. I don't know if a solution was found, but the workaround was switching the network type to CDMA only, and then switching "back." The "back" is the key for me (I hope). What should it be set to? I don't remember what it was before I started messing around. It may have been global, but I tried that to no avail. Does anyone have a minute to pop into their settings and check? Thanks!

"Preferred network status" for T-Mobile

I screwed up my phone. I'm on Consumer Cellular on their T-Mobile version. If I go to *#*#4636#*#*- I get to the phone info page. In the middle of that page I fat-fingered the dropdown for "Set Preferred Network Type:" and I don't know what it should be. If I put "LTE Only" I have data and no voice service.
I'm running Lineage 8.1 so in the settings for the phone I have lots of options under "Network & Internet", "Mobile Network", "Advanced", "preferred network type" and this has other options.
I've tried all kinds of combinations and I either have LTE and can't make or receive calls, or I change it to something different and can make and receive calls but no data. When I make a call and hang up I don't have data anymore. I'm not sure what combination I should be using so I have data and also get calls.
Anyone running Lineage 8.1 on T-mobile? If so, what settings work for you?
Thanks in advance,
Bearhawk

SM-G781N won't connect to 4G/5G, only works in 3G

hi
i got the phone from korea, the problem is when connecting to 4G the phone would lose internet and calls then lose the network, i get a message saying "failed to register to network (15)" but if i forced the phone to connect to 3G then it works fine. here's what i tried to fix the problem :
turning off the mobile network then turning it on
resetting the network settings
removing NR Whitelist
and none of them fixed the issue. there's a korean menu in the service mode, but i didn't miss with it. i have attached screen shots of the software information and the korean menu in the service menu.

Who provides your service? Have you tried going into network settings and APN and see what that says

If it is a Korean phone and you aren't in Korea and it is locked into the network then you won't be able to get service somewhere else I don't think

allday5850 said:
Who provides your service? Have you tried going into network settings and APN and see what that says
Click to expand...
Click to collapse
im using my local non korean sim card and it's working fine, and im also using my local sim's APN settings, the sim card is not korean and nor are the APN settings.
i want to exhaust all my available options before i go for the format.