Database Develop

USB not working but system is alive - how to flash?

Hey guys,
I got a SGS I9000 here from a friend of mine who got it from egay (stupid, but nvm) and I try to fix the device but till now I was not lucky.
I want to upgrade to a newer / higher version but the "faulty" USB makes it very difficult.
Here are the facts:
- The device is running 2.3.3 Gingerbread
- Device Information: GT-I9000HKYDBT + PDA: I9000XWJVI , PHONE: I9000XXJVO, CSC: I9000DBTJV2
- Charging via USB does work, data connection does not work
- Entering Recovery Mode works
- CWM is not installed
- Samsung Kies is installed
- Entering Download Mode works
- External micro-SD Cards are being recognized at Android
- If I connect the device in Windows or Download Mode, the message "USB-Device was not recognized" comes up
What I`ve tried till now:
- three different micro-USB cables (original Samsung, HTC and Motorola)
- two different PCs with Kies installed and not installed
- Tried to flash via Recovery Mode but nothing is shown on the "external SD", even after renaming to update.zip
- Managed to copy files into internal flash but since the "original" Recovery Mode seems to have a verification, the flash process aborts either with
"E:signature verification failed" or "E:failed to verify whole-file signature"
- Odin of course but USB data does not work unfortunately so Odin as well
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated.
Cheers

FaCeOff said:
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated. Cheers
Click to expand...
Click to collapse
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option

email the recovery file to yourself or upload to dropbox. then download to your phone and flash away!

Don't forget to thoroughly clean your micro usb connector. I once had the same issue with my sgs. Different cables or drivers didn't work. I was about to give up on it, but then fixed it by cleaning it with rubbing alcohol and very tiny dentaid toothbrushes.
Afterwards it worked like a charm. Worth giving a shot, since these connectors collect a lot of dust/dirt over time.

xsenman said:
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option
Click to expand...
Click to collapse
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?

FaCeOff said:
Any other suggestions?
Click to expand...
Click to collapse
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.

hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..

xsenman said:
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.
Click to expand...
Click to collapse
Yep, doesn't look good and now I'm quite sure this cannot be solved easily.
tchindalia said:
hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..
Click to expand...
Click to collapse
Well, as told above, I can enter download mode but USB DATA connection does not work!
So from my understanding, Odin only works if there's a valid connection, otherwise I could flash anything and would not have the problem
Mobile Odin does not work due to the root restriction.
Is there any way to flash another ROM or get the the device rooted with these restrictions?

Stuck on First Screen
Well this is not an answer to the problem. Well am having the same problem as you, just mine is more complicated.
I managed to root using Z4root by copying the APK file on external sd .
I got cmw and entered recovery.
I updated using the CM10-unofficial rom that is in the development forum
I restored the nand that i did in recovery and now the phone is frozen (Stuck) on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode.
Or a tutorial on how to change the usb port myself.
Thanks in advance.

kigordid said:
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
Click to expand...
Click to collapse
As long as you can get to download mode, flashing should solve your problem after you resolve the USB problem , which can be due a number of issues.
Somehow ROM changes and bad flashes, may have pin configuration changes on the phone, (just like changes in combo key functions when you use different ROM) ...so driver changes works for some
So you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 options to get your USB connection back. But first break that cycle by removing battery and reinsert after a few min and check phone connection , and try those options.

FaCeOff said:
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?
Click to expand...
Click to collapse
Sorry to repeat my comment again, but if all these drivers aren't working for you, you should check your micro-usb connector. I'm pretty sure the connector is the issue here.
Have you tried cleaning the micro-usb connector on your phone? Don't just blow the dust out or clean it a bit with some paper, but go for a complete and thorough cleaning solution.
Get yourself some dentaid toothbrushes. Get a few sizes. You can get these at your local pharmacy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Get some Cleaning / Rubbing Alcohol. You can find this at a handyman store or your local pharmacy should have this as well.
Dip the toothbrush with some rubbing alcohol. The toothbrush should be a bit moist but not dripping wet.
Start cleaning the connector. You can apply some pressure to clean everything.
If this doesn't work, no harm done. These things are quite cheap and rubbing alcohol and these dentaid toothbrushes come in handy when other electronics go bust.
Honestly, just try it! People always dismiss this solution attempt as a last resort but it's usually the problem fixer.

I fixed mine that had the same problem with a similar technique
Sent from my GT-I9000 using Tapatalk 2

Trying using mobile Odin.

Establish best recowery mod fix and adb on your computer.
without root and probably will not even cwm mobile Odin.

[Q] Hard-Bricked I9000 (?)

Hey there guys!
Recently a friend asked me to help him about his i9000 because wont pass the bricked screen:
(https://www.fixmystuff.in/FMS_Forum/attachments/samsung_galaxy_s_black_screen_of_death-jpg.52/)
I've tried all and can't even enter download mode (tried Volume Down + Menu + Power button and also tried with Volume Up, usb connected or disconnected)... Could only do it once and entered Download Mode but my computer didn't recongnized USB Device... Tried to install Kies and couldn't do it aswell.
Any idea? Can't do nothing... Almost can't touch any button because goes always to the same screen!

Crepiii said:
Any idea? Can't do nothing... Almost can't touch any button because goes always to the same screen!
Click to expand...
Click to collapse
you are still in download mode, so follow this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Tutorial] How to Unbrick, Flash, Downgrade, Root, Update i9000 from Froyo to Kit Kat
flash the gingerbread stock ROM or the rescue kit.
Check this out! Links to useful Guides and " Banned " Documentaries ​

Nop, not in download mode anymore :/
Enviado do meu GT-I9300 através de Tapatalk

Crepiii said:
Nop, not in download mode anymore :/
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
when your phone have this
your phone will connect to Odin3 ( provided you have samsung USB driver s and samsung USB cable connected to PC, if you have a problem connecting...READ the tutortial, solutions are all given in it.
Check this out! Links to useful Guides and " Banned " Documentaries ​

If the phone can enter download mode,install latest samsung usb drivers and connect it via Odin. From there everything else is east ...

I had the same problem and what I did to fix it was I put my phone into Odin mode, then from my computer I downloaded
Sent from my SM-N900T using xda app-developers trwp recovery img. and flashed that. It fixed the problem instantly. I'll try to find the download link for it if you want to try that..

Nop, nothing works... Downloaded Odin 3.07 and searched for Samsung Drivers, installed... And computer don't even recognize phone...
EDIT: Ok, entered Download mode on phone again, yet... Odin don't find anything and Windows stills saying that USB Device is not recognized... Download mode and that screen is the only thing i can do... I'm using Samsung USB cable (tried with SE cable to)... direct connecting to usb port from motherboard, not hub... Tried with Kies installed, without Kies installed... Tried 2 or 3 Samsung USB driver... I've searched and cleaned usb female port on phone aswell... Don't know what else to do!

Bump! Any more ideas?

Try to uninstall all samsung drivers , even kies then put the phone in download mode and connect it via usb to let the windows install the drivers for you.
Have you tried on another PC?

Pull the battery out,wait 10 minutes.Then try again.
Change port.Try all usb ports.Try different version of Odin or Firmware.
Or maybe you need new driver to install.

USB connection not working!

Hello all,
I recently bought the Galaxy S3 LTE (I9305) and the phone only charges when connected to my PC, it beeped and installed some drivers but it's still the same. Take a look at that picture (it only shows this when i connect the phone):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

limnaln said:
Hello all,
I recently bought the Galaxy S3 LTE (I9305) and the phone only charges when connected to my PC, it beeped and installed some drivers but it's still the same. Take a look at that picture (it only shows this when i connect the phone):
Click to expand...
Click to collapse
Do you have the drivers for Galaxy s III, 9305 installed on your computer?I think that you don`t have the drivers installed and the message is related to your old terminal.Install Kies3 and you will have the right drivers.:good:

viktorak said:
Do you have the drivers for Galaxy s III, 9305 installed on your computer?I think that you don`t have the drivers installed and the message is related to your old terminal.Install Kies3 and you will have the right drivers.:good:
Click to expand...
Click to collapse
I have installed Samsung Kies and Samsung USB Drivers on my computer. I didn't exactly understand you?And I'm running Win7 x64, I've tried it with another cable and another laptop.

Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.

viktorak said:
Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.
Click to expand...
Click to collapse
Oooh, i have 2.6.3....
I will change it and write to you.

viktorak said:
Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.
Click to expand...
Click to collapse
Still nothing...
Yesterday i managed to update to 4.4.4 official through odin and after that i flashed AOSP ROM. Now USB connection and even Odin doesn't detect my device ( No beep on PC too)

limnaln said:
Still nothing...
Yesterday i managed to update to 4.4.4 official through odin and after that i flashed AOSP ROM. Now USB connection and even Odin doesn't detect my device ( No beep on PC too)
Click to expand...
Click to collapse
delete everything, from drivers to odin to everything related to samsung. Then try again. Also change usb cable, change usb port or try on another pc

klemen241 said:
delete everything, from drivers to odin to everything related to samsung. Then try again. Also change usb cable, change usb port or try on another pc
Click to expand...
Click to collapse
OK, BTW I've tried on another PC and different cable.
And should i try to go back to 4.4.4 stock or an older version of touchwiz?

limnaln said:
OK, BTW I've tried on another PC and different cable.
And should i try to go back to 4.4.4 stock or an older version of touchwiz?
Click to expand...
Click to collapse
maybe, but its not really a high chance its roms fault

klemen241 said:
maybe, but its not really a high chance its roms fault
Click to expand...
Click to collapse
Samsung's USB connection is very random, i got the phone with 4.3 and after a few restarts Odin/PC managed to see my device in download mode and i was able to update to 4.4.4. For now, i returned to 4.4.4 touchwiz - nothing is working (I've used MobileOdin to flash it)

limnaln said:
Samsung's USB connection is very random, i got the phone with 4.3 and after a few restarts Odin/PC managed to see my device in download mode and i was able to update to 4.4.4. For now, i returned to 4.4.4 touchwiz - nothing is working (I've used MobileOdin to flash it)
Click to expand...
Click to collapse
yea strange. I never had this problem. I bought myself a dock from ebay for few dollars and my connection works all the time. I do use nokia usb not samsung cable. It may depend on lenght of usb cable too

I think this may be a soft USB brick.Very very possible ..Cann you enter in Download mode?

viktorak said:
I think this may be a soft USB brick.Very very possible ..Cann you enter in Download mode?
Click to expand...
Click to collapse
Yes, i can, but the PC doesn't detect it now, i managed to flash 4.4 with it yesterday...

Hi,mate,have you tried to do Factory reset from recovery?

viktorak said:
Hi,mate,have you tried to do Factory reset from recovery?
Click to expand...
Click to collapse
Yes, I've done it...

do you got your pc set to automatically search on the internet for drivers?

limnaln said:
Yes, I've done it...
Click to expand...
Click to collapse
Have you tried uninstalling everything Samsung related from control panel and then going into device manager and uninstalling Samsung drivers (they should be under phone, usb mass storage or other when you plug the phone in) and then letting the phone install drivers by itself?

I've managed to get recognized by Odin by just plugging the USB cable in the phone before it says Downloading... (In the warning menu).
But now, after 6 hours it can't be recognized again.... DUMB.RANDOM.****

I managed to get root and flash recovery, then I flashed a ROM. I figured out that i can use Mobile Odin instead of PC Odin, but i still need to fix that qualcomm usb driver error (I may go to a service today)... :fingers-crossed:

limnaln said:
I managed to get root and flash recovery, then I flashed a ROM. I figured out that i can use Mobile Odin instead of PC Odin, but i still need to fix that qualcomm usb driver error (I may go to a service today)... :fingers-crossed:
Click to expand...
Click to collapse
:fingers-crossed: 4u!

[Update][S/W stuck rescue]Ultimate rescue guide

First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way. < should work for : 3GQCT : wParam = 2010, lParam = 210 >
Edit 1/4/2015. New method:
< Make a cable like this or buy a USB-Y cable, and try to flash with it >
http://bit.ly/1ImTveS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why? Because Optimus 4x needs more power for flash. Also, try to play with battery if you are still stucked. How?
Start to flash without battery inside, wait 5-10 seconds after flash starts, put the battery.
If you don't have luck, combine with the old one:
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.

okay. i'll try this now.. as a last resort..

confused
take a look at the picture..

Mine phone was start automatically on S/W.
You can let the board and try with it connected. Should work.

well flashed with ics :laugh:
thank you dude :good:
but after i tried to flash v20c latest, it wouldn't flash.. stops at 17 seconds.. error code(207)...
LOG attached..

After a lot of tries finally managed to flash latest v20c(germany). But sadly, that didn't fix anything..

adryyy said:
First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way.
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.
I'll add images if someone is interested.
Click to expand...
Click to collapse
I suspect the problem comes from the sim holder or antenna(the white cable) , if you still have you phone opens then try to disconnect only one of them and flash normally.
I did have same problem with the signal and magically it's gone... but my wifi lost it MAC.... in that case I just run a script to fake one and it works
anw, I also have the 10% stuck, I used the LGFlashTool2014 (somewhere in the forum, sorry) and did a clean flash V20A with CDMA setting (???) and it passed the 10% error
FYI: link for the tool
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar

I have the same issue, I followed this guide and all others very carefully and still no luck.
Thanks for the effort.:crying:

I've updated the guide. Try it .
New solution will work 90% of time.

i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.

jocrod said:
i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.
Click to expand...
Click to collapse
You should buy a USB Y cable ( http://www.nevacell.com/nevacell/images/UTStarcom/Cable/YC150B/USB_Y_Cable.JPG ) and put one USB in wall plug charger.

same issue
please help me.. my lg seems hang logo.. then i try to flash... same issue.. log 2010

I solved the issue by using the following solution: [Q] How to unbrick? (Stuck at S/W update mode)

hello, i bought this usb y-cable and im still stuck on error 210 i tried almost everything every method and nothing works im always stuck
at s/W update mode and b2cappsetup recognizes my p880 as lge455 and says v20c youre on the newest firmware
do you have another method for me ?
thanks in advance

Hard Bricked ALE-l21

So last night I created a flashable zip from the UPDATE.APP with the Huawei update extractor tool. I flashed it with TWRP it flashed everything but at the end it said it was unable to mount /system. I rebooted but nothing happened. Now when I try to power on the phone the notification led blinks one time red two times green and nothing appears on screen. I can't enter recovery, fastboot or anything else.
Anyone have any idea what can i do?

Looks Bad ?
Gesendet von meinem hi6210sft mit Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
Works ADB?

Maybe u have already tried but can you manually start fastboot mode? Power button + Volume down + usb cable?
If it enters fastboot mode, flash stock recovery, BOOT.IMG, CUST.IMG, and SYSTEM.IMG.
I've never heard of a flashable zip that actually worked for P8 Lite

Does your pc detect the phone when you connect it to usb? You can try another usb port and look into device manager.
If it detects anything, then try
Code:
adb devices
to see if there's anything. If adb finds a device
Code:
adb reboot-bootloader
to get into fastboot mode and then you can flash boot.img, cust.img, recovery.img and system.img.
You can also try to boot into fastboot mode directly (it may work, even if you don't see anything on the screen) and try
Code:
fastboot devices
if it was detected. If it was, you can flash the img's.
If nothing of the above works, send the phone into warranty and act dumb ("it was off when i woke up and it doesn't turn on anymore even if i charge it for hours" for example, don't mention the bootloader, flashing stuff, twrp, etc.); the chances are that they will replace your motherboard or give you a new phone.
Good luck.

I will probably send the phone in warranty.

Hello,
I have the same problem, and i also want to send it back as a case of warranty, does it work for you? Did you get a new Phone, or did they fix it?
Wish you a nice day,
thanks for your answer!

I'm having the same problem...
Weird red LED patterns...reboots, doesnt turn off (consequence, always very low battery), only huawei logo for eternity....
Usb on or off on the phone with the VOL DOWN + POWER, doesnt go to fastboot...
Anything works...
Sugestions? Thank you!

As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.

spirto82 said:
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
Click to expand...
Click to collapse
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial

Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
Click to expand...
Click to collapse
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21

spirto82 said:
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
Im on B052 ROM working good, I guess im good from now
Thank you

I also got the same problem don't know what tried fastboot multiple times

if u still have the problem,
just disconnect the battery " not easy work :3 " .. reconnect it
HOLALALA.. your phone works now ..
you can see a post for me in this forum and some guy helped me ..

i,m also stuck at same position..
when i connect and wait , after led's stop blink, my device connected with PC
with unknown drivers written chinese language.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help please..

Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Click to expand...
Click to collapse
Hey dude! I have the same issue from same mistake now, how did you enter fastboot? What buttons did you use, did you have your battery unplugged? I've been trying everything for hours now but no luck...
Cheers, hope you see this post!