So last night I created a flashable zip from the UPDATE.APP with the Huawei update extractor tool. I flashed it with TWRP it flashed everything but at the end it said it was unable to mount /system. I rebooted but nothing happened. Now when I try to power on the phone the notification led blinks one time red two times green and nothing appears on screen. I can't enter recovery, fastboot or anything else.
Anyone have any idea what can i do?
Looks Bad ?
Gesendet von meinem hi6210sft mit Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
Works ADB?
Maybe u have already tried but can you manually start fastboot mode? Power button + Volume down + usb cable?
If it enters fastboot mode, flash stock recovery, BOOT.IMG, CUST.IMG, and SYSTEM.IMG.
I've never heard of a flashable zip that actually worked for P8 Lite
Does your pc detect the phone when you connect it to usb? You can try another usb port and look into device manager.
If it detects anything, then try
Code:
adb devices
to see if there's anything. If adb finds a device
Code:
adb reboot-bootloader
to get into fastboot mode and then you can flash boot.img, cust.img, recovery.img and system.img.
You can also try to boot into fastboot mode directly (it may work, even if you don't see anything on the screen) and try
Code:
fastboot devices
if it was detected. If it was, you can flash the img's.
If nothing of the above works, send the phone into warranty and act dumb ("it was off when i woke up and it doesn't turn on anymore even if i charge it for hours" for example, don't mention the bootloader, flashing stuff, twrp, etc.); the chances are that they will replace your motherboard or give you a new phone.
Good luck.
I will probably send the phone in warranty.
Hello,
I have the same problem, and i also want to send it back as a case of warranty, does it work for you? Did you get a new Phone, or did they fix it?
Wish you a nice day,
thanks for your answer!
I'm having the same problem...
Weird red LED patterns...reboots, doesnt turn off (consequence, always very low battery), only huawei logo for eternity....
Usb on or off on the phone with the VOL DOWN + POWER, doesnt go to fastboot...
Anything works...
Sugestions? Thank you!
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
spirto82 said:
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
Click to expand...
Click to collapse
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
Click to expand...
Click to collapse
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
spirto82 said:
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
Im on B052 ROM working good, I guess im good from now
Thank you
I also got the same problem don't know what tried fastboot multiple times
if u still have the problem,
just disconnect the battery " not easy work :3 " .. reconnect it
HOLALALA.. your phone works now ..
you can see a post for me in this forum and some guy helped me ..
i,m also stuck at same position..
when i connect and wait , after led's stop blink, my device connected with PC
with unknown drivers written chinese language.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help please..
Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Click to expand...
Click to collapse
Hey dude! I have the same issue from same mistake now, how did you enter fastboot? What buttons did you use, did you have your battery unplugged? I've been trying everything for hours now but no luck...
Cheers, hope you see this post!
Related
Hello, I managed to kill my phone trying to flash a new recovery. It didn't boot anymore and was stuck at the LG screen.
So I tried to flash the stock ROM using NVFlash. I did everything as the tutorial told me to (plug phone in with volume keys pressed, installed drivers correctly et cetera) but when I executed flash.bat, a CMD window openend and it says "NVflash started" for like 30 minutes without doing anything.
It looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe some important information about my phone:
try to unplug and plugin again your cable usb and HH make sure using the original LG cable
I haven't received any original LG cable with my phone. I am using a normal USB to micro USB cable which worked fine. What difference does the cable make?
I tried unplugging and pluggin my phone back in 10 times now, didn't help. Getting a little nervous here.
I have absolutely no clue what I have done but it just worked... Haven't done anything different. I simply plugged the phone back in and started flash.bat, as 15 times before. This time it worked. Maybe I got extreme good luck or extreme bad luck. Either way, I am sorry I cannot provide help for anyone in the future who has the same problem except spam that goddamn flash.bat till it works.
theevilworm said:
I haven't received any original LG cable with my phone. I am using a normal USB to micro USB cable which worked fine. What difference does the cable make?
I tried unplugging and pluggin my phone back in 10 times now, didn't help. Getting a little nervous here.
Click to expand...
Click to collapse
for me, i tried a cheap micro usb cable, it doesn't recognize well. but when i try the original one it does recognize well, and it's good. and can get adb devices
theevilworm said:
I have absolutely no clue what I have done but it just worked... Haven't done anything different. I simply plugged the phone back in and started flash.bat, as 15 times before. This time it worked. Maybe I got extreme good luck or extreme bad luck. Either way, I am sorry I cannot provide help for anyone in the future who has the same problem except spam that goddamn flash.bat till it works.
Click to expand...
Click to collapse
Might be because only ONE NVFlash command can be issued per connection. If for example you run NVFlash --sync first, then you need to unplug and replug it in APX mode before you can run the actual NVFlash command. Caused me a lot of frustration the first time I tried it.
Thank you very much Trym, I was stuck at exact this point and I used NVFlash --sync everytime to check if my phone is really connected! Now it worked perfectly. Thanks!
theevilworm said:
I have absolutely no clue what I have done but it just worked... Haven't done anything different. I simply plugged the phone back in and started flash.bat, as 15 times before. This time it worked. Maybe I got extreme good luck or extreme bad luck. Either way, I am sorry I cannot provide help for anyone in the future who has the same problem except spam that goddamn flash.bat till it works.
Click to expand...
Click to collapse
(wired question) What version of windows do you run? 64-bit or 32-bit? I couldn´t open the NVflash.exe file with win7 64-bit to test it (NVflash --sync) after installing APX drivers. The command window just flash-opens and closes..
thanks
Palm90 said:
(wired question) What version of windows do you run? 64-bit or 32-bit? I couldn´t open the NVflash.exe file with win7 64-bit to test it (NVflash --sync) after installing APX drivers. The command window just flash-opens and closes..
thanks
Click to expand...
Click to collapse
Read the instructions once again. You must open windows cmd and navigate to directory where you have NVFlash.exe. Dont double clikc NVFlash, it will close immediately.
In windows type cmd, navigate with cd command to directory where you have NVflash.exe and type nvflash --sync.
It doesn't matter if you have 32 or 64 bit w7.
Yeah, or run the .bat file...
Sent from the new LG-P990
I have got my phone flashed with nvflash now. I have no idea what nvflash is for though, and no idea what to do further. My phone was in a boot-loop due to having cwm recovery for G2X when I have an O2X. What are the next steps to having a functional phone, preferably a custom ROM such as DjangoManouche or Temasek cm7 if not stock? I cannot find any tutorial when I'm searching, and everything in this place is buried in ICS stuff...
the phone was working perfectly a while back, havent used it since i got a new phone, but i tried transferring songs and i get USB device not recognized.
i have tried installing htc sync, htc drivers, but the problem still persists
USB DEVICE NOT RECOGNIZED
i have uninstalled the driver in DEVICE MANAGER, but still no fix
i cant run a RUU or copy other roms, because USB wont mount
i flashed another nandroid on my device, but the problem still persiists
any ideas? everything works except USB MOUNTING
usb mounting = dead? tried everything, from pdanet, to uninstalling, to switching nandroids, nothing fixes it
For_itembine said:
usb mounting = dead? tried everything, from pdanet, to uninstalling, to switching nandroids, nothing fixes it
Click to expand...
Click to collapse
Is your phone seen in Device Manager? Like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
plugged it in, driver installed
so weird, hours upon hours, a few days trying to fix, and wam, driver installed
wtf
thanks for your help anyways
For_itembine said:
plugged it in, driver installed
so weird, hours upon hours, a few days trying to fix, and wam, driver installed
wtf
thanks for your help anyways
Click to expand...
Click to collapse
make sure the port is not dirty on your phone with debris !!
I also have the same problem, tries everithing (windows 7) different cables, but I can't flash other recovery as I booted in bootloader/ fastboot it says "fasboot AC"
nkk71 said:
make sure the port is not dirty on your phone with debris !!
Click to expand...
Click to collapse
now its back to usb not recognized, the usb must be stuffed i guess, all my phones work no problem
dammit, i thought running a RUU might help, but i cant get it connected
i mean the phone works, just doesnt want to mount usb storage
Solution fixed
FIXED IT, as i said the usb randomly would work sometimes for a brief period and stop again, in the brief period (dat short time span) i managed to get into fastboot (normally it would say AC) but it said USB, amazing luck, i managed to flash HTC STOCK RECOVERY
than i downloaded the 4.3 update within the phone, updated my phone, and now it WORKS
something must have been corrupted in my system
For_itembine said:
FIXED IT, as i said the usb randomly would work sometimes for a brief period and stop again, in the brief period (dat short time span) i managed to get into fastboot (normally it would say AC) but it said USB, amazing luck, i managed to flash HTC STOCK RECOVERY
than i downloaded the 4.3 update within the phone, updated my phone, and now it WORKS
something must have been corrupted in my system
Click to expand...
Click to collapse
Lucky b****d !
I can't do that, but trough airdroid (wifi) I can manage to copy things on my phone. The problem is that if this method doesn't work for me I will be unable to get it back as it is now, and besides USB everything works perfectly
I think the recovery can be flashed trough terminal emulator without PC, but then how to install the rom?
edit: solved
http://forum.xda-developers.com/showthread.php?p=50379619
different usb cables
Mine is not even recognized in the device Manager. i tried using different usb cables, clean the ports, nothing happens. I also tried updating the OS to Lollipop but still USB is not recognized by the computer. Any other options?
I have the same issue. I don't know what it is or why but God it is frustrating.
usb not recognized
Turn off the phone and thoroughly clean the port on it. I've seen it happen quite a lot, fluff just gets compacted and stuck and breaks contact with enough pins to cause this.
this works for me on samsung tab A
https://forum.xda-developers.com/ga...rging-recognize-android-t3787571#post76460493
Hi, I hope you can help me, I tried to install twrp on my Xiaomi but I got an issue, after that issue Any PC recognize my device, I can enter to fastboot mode.
When I try to use miflash or CMD to flash the firmware it only says >waiting for device< even though if it is connected and I have all drivers, I uninstalled and install again but I got the same issue.
I hope Someone can help me, please.
Pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kevin2546 said:
Hi, I hope you can help me, I tried to install twrp on my Xiaomi but I got an issue, after that issue Any PC recognize my device, I can enter to fastboot mode.
When I try to use miflash or CMD to flash the firmware it only says >waiting for device< even though if it is connected and I have all drivers, I uninstalled and install again but I got the same issue.
I hope Someone can help me, please.
Click to expand...
Click to collapse
I had the same problem, how I solved it probably is not good to hear...
*Turn off your phone and conect it to PC, see if it's being recognized by your PC, check it out from *device manager* on Windows. If the PC shows something like QDLoader or at least something, your phone is probably auto booting into edl mode, if this is true you can try to flash using miflash
Try fastboot from a PC running Linux.
If these options don't help you, you are probably gonna need to open your phone and short pines, just like I did to revive mine xd
Good luck
Tried
Adairo said:
I had the same problem, how I solved it probably is not good to hear...
*Turn off your phone and conect it to PC, see if it's being recognized by your PC, check it out from *device manager* on Windows. If the PC shows something like QDLoader or at least something, your phone is probably auto booting into edl mode, if this is true you can try to flash using miflash
Try fastboot from a PC running Linux.
If these options don't help you, you are probably gonna need to open your phone and short pines, just like I did to revive mine xd
Good luck
Click to expand...
Click to collapse
I tried to do that, the problem is when I connect my device to PC doesn't recognize, I try un 2 pc's and 1 laptop, always the same issue, I can enter to fastboot mode and that's all, I can't do anything else in the PC cause it couldn't recognize it
kevin2546 said:
I tried to do that, the problem is when I connect my device to PC doesn't recognize, I try un 2 pc's and 1 laptop, always the same issue, I can enter to fastboot mode and that's all, I can't do anything else in the PC cause it couldn't recognize it
Click to expand...
Click to collapse
Duplicated, please delete
---------- Post added at 10:27 AM ---------- Previous post was at 10:27 AM ----------
kevin2546 said:
I tried to do that, the problem is when I connect my device to PC doesn't recognize, I try un 2 pc's and 1 laptop, always the same issue, I can enter to fastboot mode and that's all, I can't do anything else in the PC cause it couldn't recognize it
Click to expand...
Click to collapse
that is exactly the same problem I had weeks ago... if there is no way to make the pc recognize your phone, you'll have to short those pines man, don't be afraid it's easier than it seems to be.
Adairo said:
Duplicated, please delete
---------- Post added at 10:27 AM ---------- Previous post was at 10:27 AM ----------
that is exactly the same problem I had weeks ago... if there is no way to make the pc recognize your phone, you'll have to short those pines man, don't be afraid it's easier than it seems to be.
Click to expand...
Click to collapse
I Understood, do you have a link to check How to do?
I don't want to lose my phone cause is the only one i have
kevin2546 said:
I Understood, do you have a link to check How to do?
I don't want to lose my phone cause is the only one i have
Click to expand...
Click to collapse
*Open your phone
*connect to your PC via USB while you short pines
*Flash stock rom using miflash
Search some pics and videos to watch how to open your device and find those pins
Good luck
Good Morning Guys,
I have Redmi 4X 64GB version. The phone has unlocked bootloader and was running on Havoc OS V2.5 and the phone was rooted.
About a week ago the phone is suddenly got into weird state. And i am unable to figure out what to do.
The phone is gotten into Linux Penguin Logo. I am attaching an image with that problem. And also phone in not responding to any physical power+volume button integration. Any combination just takes me to this Penguin Screen. Here are some thing i have already tried to do but not working at all. Although when i connect this device to computer with this Penguin Logo screen it does get detected as fastboot device but so far that isn't helping.
Some tricks that i have already tried but not working:-
1. I have booted my phone into edl mode and installed fastboot rom via miflash tool, and it is successfully installed but after pressing power+volume button it is the same screen as Penguin Logo. [so Not Working]
2. I have opened the phone disconnect the battery and tried some combinations but still no luck.
3. Used every combination with power button as well as connected to pc and used fastboot commands but not working out.
4. TWRP installation get failed. ( will attach the preview).
So, Please anyone has any clue or anyone has ever face this same problem please reach out to me. Any Honect answer will work.
Sorry i am new at writing thread. So if any mistake i am sorry.
Images:
If you still have custom recovery installed then try flashing latest firmware.
i've found this similar having issue video on youtube of Redmi 3S(Appears to be) and how it got solved, please check it here https://www.youtube.com/watch?v=oMZ08qQrqnc
i am not sure if those files are limited to Redmi 3S or can be use on other xiaomi devices but it gives some sort of idea what you should try. and video language i don't understand and maybe you understand maybe not but should be understandable by watching video.
Thanks for replying. But that is the problem i am unable to reach anywhere not bootloader nor recovery. The phone is just showing the linux penguin logo whether you use power and volume combination or you do the same via connecting to pc.
I think he has that download link in description. But that link requires password for opening .rar file. And i do not trust that guy. That file may have some bloatware or virus or something. If you find same file that he has please share that file over here so that i can use it.
Thanks.
SafvanShaikh said:
I think he has that download link in description. But that link requires password for opening .rar file. And i do not trust that guy. That file may have some bloatware or virus or something. If you find same file that he has please share that file over here so that i can use it.
Thanks.
Click to expand...
Click to collapse
Did you solve the problem? I'm stuck in it and after trying all the things (including deciphering that rar file very doubtful, which I did not achieve) I'm empty of ideas
try to put the phone in edl mode...open the phone case and disconnect the battery wire..if u have tweezer then try touching it to testpoints and then plug the usb cable at the same time...a driver will install on ur computer named (qdloader9008)....open miflash tool then try flashing it via the tool...
Time to use Device as Paper Weight
::
victorkorp1999 said:
Did you solve the problem? I'm stuck in it and after trying all the things (including deciphering that rar file very doubtful, which I did not achieve) I'm empty of ideas
Click to expand...
Click to collapse
Sorry Bro, Nothing is working at all. I mean i am IT Engineer and i have tried all things but still no luck. So, my thinking is the boot loader is too much damaged so there is nothing that can be written on it, no TWRP or no any data partition, it's all out of option. I have started using the phone as Paper Weight.
I am still hoping that someone can solve this problem and get back to me. Fingers Crossed
Thank You.
Not Working, Already tried:
jerry.07 said:
try to put the phone in edl mode...open the phone case and disconnect the battery wire..if u have tweezer then try touching it to testpoints and then plug the usb cable at the same time...a driver will install on ur computer named (qdloader9008)....open miflash tool then try flashing it via the tool...
Click to expand...
Click to collapse
Sorry Bros, Already tried all things that you have mentioned in the post and its not working at all. If somehow we can change the memory storage chip on the phone that contains the bootloader then the phone can come back to its normal form.
Try to turn fastboot if you turn this on then you are on good situation . Boot TWRP and try installing rom again ( with wiping data, cache,vendor,system,dalvik,and might internal storage)
Your problem solved or still u r stuck?
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Here is my own tested solution for you !
In my case, when i try to install boot logo on Redmi 5 then this happened.
And yet last . i find the great solution by Miassistant
.1. Download Miassistant on PC
2. Download ADB Driver for your Pc
3. Download (Recovery Rom) not Fastboot Rom
5. press volume up + Power for (Miassistant mode)
6. Flash from Miassistant
Thanks for the solution. My device is already fixed, but i this solution can work. If something like this happens in future we can try this out. But i really wanna know what causes this thing to be happened?
Xiaomi Mi 5s Plus stuck in Linux icon FIXED
SafvanShaikh said:
Thanks for the solution. My device is already fixed, but i this solution can work. If something like this happens in future we can try this out. But i really wanna know what causes this thing to be happened?
Click to expand...
Click to collapse
Sorry if this is not the place for post this, but I read a lot of cases that people have their phones stuck in Linux Icon, after a fail installing a ROM, this same case happened to me in a Xiaomi Mi 5 S Plus, one of the devices of Xiaomi, with less support because there were not to much units manufactered.
In mi case, after try to put the device in the fastboot mode, that was impossible I had to put the MI5 s Plus in EDL mode, using the 2 test points pins in the motherboard, and using Miflash for instal a fastboot rom.
I ll explain the steps;
A- Install MiFlash, in your computer, with all the drivers
B-Download a stable Fastboot ROM for your device, you can find it easily in the forums. ( In my case was the "natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a" with MIUI 10 for the Xiaomi MI5 S Plus (natrium) )
C- Put your device in EDL mode
Normally if you are stuck in the linux mode, this is your only solution for put the device in EDL mode, use the 2 test points in the motherboard of the phone.
Check in internet, where are located the test pins in your device, is different for every model. ( I attached a image of the 2 test points in Mi 5 S Plus)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For put the device in EDL mode:
1- Disassemble the back cover of your phone
2- Disconect the battery
3- Connect the usb cable to the phone, but not connect yet to the computer
4-Use something metallic, like a clip, wire, or tweezers, and touch the 2 Test points at the same time in the motherboard and while you re touching this 2 points connect the USB to the computer
5-You ll hear the sound in the computer that recognizes a new device conected, after that you can remove the clip or wire from touching the 2 points in the board of the phone
6-Open Miflash and have to appear a device connected like COM...., If don´t appear , you can make the process again (there is no problem if you make the steps with the MIflash open)
7- Select the option Flash all (clean all) in Miflash for install the fastboot rom
8- If some error appears during the installation, check the fastboot rom, I ll try 2 or 3 differents versions before one that was completely installed without error
9- If the installation is correct, your phone will be restart, and take some minutes for the first boot after the installation.
In my case, with this device and other Xiaomi devices, to put the phone in EDL mode, and install a stable official fastboot rom, was the only solution for this kind of software problems, I hope this post help someone
bro i have the same problem i need get my data how can i get back please help i have my grandmother lst pics in it
SafvanShaikh said:
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Click to expand...
Click to collapse
bro data recover hoaa ke nahi please tell me
SafvanShaikh said:
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Click to expand...
Click to collapse
without data loss..., please fast reply given my redmi 3s prime mobile this type problem I attached charging and show bird logo no any start... please contact me 9106142185
Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx
robin_vilensky_ said:
Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx
Click to expand...
Click to collapse
Just to exclude the easy possibilities:
From your phone's status bar drop-down menu, does it say "charging via usb"? If so, you need to change that to "media transfer" (or something alike).
As for fastboot, this wouldn't actually be nessecary though. Here just make sure you open cmd as an administrator (on Windows, which I assume you're using, since you mention a device manager - on linux you would need to be root).
And, did you activate usb debugging in the developer settings already?
Maybe also do a windows update with your device connected, if still no go.
I have the same problem. I've tried everything without result.
You guys need to give more detailed information, if you want more detailed help..
What ROM are you on?
List everything that is not working.
List your installation procedure.
When did the problem occur for the first time?
What exact steps did you already try?
Which software versions are you using?
For instance using an older fastboot version may result in many problems, but one can only blindly guess with that little concrete info.
If I had such general issues somewhat relating to storage though, I personally would wipe my entire phone in both slots and format data (if you can somehow enter recovery without fastboot ofc, like from a terminal emulator app or via an extended reboot menu present in many custom ROMs).
Oh, and is adb working?
I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Badotti said:
I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
Click to expand...
Click to collapse
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?
Phil_Smith said:
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?
Click to expand...
Click to collapse
fastboot does not detect the phone, neither on windows nor linux .. not even mi suite does, there are several people with the same problem in mi A2 lite and mi A2 too ... it seems like it was after the October update.
Hello! I have a similar problem. did you find a solution?