Database Develop

Droid 4 Utility Gingerbread Only

Gingerbread only. If you are on ICS this will not work. Don't try! Get the ICS only tool here: http://forum.xda-developers.com/showthread.php?t=1779810
This is based on the original Droid 4 Utility with edits. Contains the complete GB fastboot files to restore your phone, root, unroot, install voodoo rootkeeper, safestrap of BG, etc. Extract after downloading and doubleclick the script to run.
Download here: Droid4 GB Only.zip - 1.19 GB
MD5 checksum posted at the hosting site.
If you have trouble connecting be sure usb debugging is on and you have the latest moto drivers installed. Moto drivers here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78460/p/30,6720,8302
For menu 1 or 2 your phone must be in fastboot mode first. Enter this by using the tool option or manually by powering off, then hold both volume buttons and pressing power for a few seconds, release the power button and select "ap fastboot".
And of course be sure you have a good usb cable and a full battery if restoring your GB system.
Use at your own risk.

My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?

badboi_zero said:
My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?
Click to expand...
Click to collapse
Yes, you can use this utility to reflash .219 to your phone through fastboot. Did the same thing to mine awhile ago and actually used it to reflash stock so I could upgrade to the .217 leak
Sent from my DROID4 using xda app-developers app

I'm having troubles rooting my .219 D4.
I installed the drivers, and according to the Moto device manager, I am up to date. USB Debugging is checked on.
When I try to root it using this tool (menu 3) and the phone is plugged in with charge only mode (using a stock Moto cable), this is what the command prompt spits out. It isn't instant, it's usually done over the course of 2 minutes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doesn't actually reboot on its own, and after rebooting manually, there is no SU app in my drawer.
I then tried to use menu 3 while in AP Fastboot mode, by using power and both volume buttons to get into the fastboot menu. I plug in my phone to the computer, and run the script and I get this:
It just hangs there for over 5 minutes and the phone doesn't do anything.
Here is the setup for my latter attempt:
Please help me figure this out. Could the drivers be corrupt? I've uninstalled and re installed the device manager from moto a couple of times. Could my anti-virus be blocking something? I think that the issue stems from a problem in the interface between the device and the computer.
Thanks in advance for any help

Hmm..it looks like the tool is possibly seeing more than one ADB server running. I'd the phone and let it up come up normal. Open up a task manager and go to the process tab. Are you seeing more than one ADB.exe process running? For some reason the tool thinks you have more than one device attached and as a result, isn't sure where to send the exploit.
This doesn't explain the troubles with Fastboot however.

When I plug in my phone and open up the tool, one adb.exe shows up in my task manager. Once I run the root script, I see a second one open. I tried killing it, and it will just open up again. How do I fix this?
If this is on the computer side, why wouldn't it explain the Fastboot problem?

SOLVED: Well, the problem wasn't really solved, but I transferred all the necessary tools to a different PC and rooted the device. So it was an issue with the original computer. MY theory is that it was an issue with the ADB interface from the Moto drivers. I'm purely spitballing on that though.
Thanks for the help anyways, guys. Time to have some modding fun!

Is there a mirror? I can't seem to download this...

Thanks for the utility!
I had some complications with the OTA update and realized that a fastboot back to stock was the only remedy. I couldn't find a linux solution (am I missing something?) so I modified the script to use moto-fastboot32. Worked great, thanks again!

Can some provide a mirror for this link? This isn't downloading...

can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....

svrnmnd said:
can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....
Click to expand...
Click to collapse
Just another request for a new mirror for this file. I would really like to unroot so I can update to ICS.

I don't think you have to unroot to update... If you've made a lot of changes to your system file, you'll probably have to undo them or fastboot back to stock (this includes installing safe strap)
Sent from my Galaxy Nexus using xda app-developers app

Try the ICS tool, it now has fastboot for ICS.

Htc one - usb not recognized

the phone was working perfectly a while back, havent used it since i got a new phone, but i tried transferring songs and i get USB device not recognized.
i have tried installing htc sync, htc drivers, but the problem still persists
USB DEVICE NOT RECOGNIZED
i have uninstalled the driver in DEVICE MANAGER, but still no fix
i cant run a RUU or copy other roms, because USB wont mount
i flashed another nandroid on my device, but the problem still persiists
any ideas? everything works except USB MOUNTING

usb mounting = dead? tried everything, from pdanet, to uninstalling, to switching nandroids, nothing fixes it

For_itembine said:
usb mounting = dead? tried everything, from pdanet, to uninstalling, to switching nandroids, nothing fixes it
Click to expand...
Click to collapse
Is your phone seen in Device Manager? Like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

plugged it in, driver installed
so weird, hours upon hours, a few days trying to fix, and wam, driver installed
wtf
thanks for your help anyways

For_itembine said:
plugged it in, driver installed
so weird, hours upon hours, a few days trying to fix, and wam, driver installed
wtf
thanks for your help anyways
Click to expand...
Click to collapse
make sure the port is not dirty on your phone with debris !!

I also have the same problem, tries everithing (windows 7) different cables, but I can't flash other recovery as I booted in bootloader/ fastboot it says "fasboot AC"

nkk71 said:
make sure the port is not dirty on your phone with debris !!
Click to expand...
Click to collapse
now its back to usb not recognized, the usb must be stuffed i guess, all my phones work no problem
dammit, i thought running a RUU might help, but i cant get it connected
i mean the phone works, just doesnt want to mount usb storage

Solution fixed
FIXED IT, as i said the usb randomly would work sometimes for a brief period and stop again, in the brief period (dat short time span) i managed to get into fastboot (normally it would say AC) but it said USB, amazing luck, i managed to flash HTC STOCK RECOVERY
than i downloaded the 4.3 update within the phone, updated my phone, and now it WORKS
something must have been corrupted in my system

For_itembine said:
FIXED IT, as i said the usb randomly would work sometimes for a brief period and stop again, in the brief period (dat short time span) i managed to get into fastboot (normally it would say AC) but it said USB, amazing luck, i managed to flash HTC STOCK RECOVERY
than i downloaded the 4.3 update within the phone, updated my phone, and now it WORKS
something must have been corrupted in my system
Click to expand...
Click to collapse
Lucky b****d !
I can't do that, but trough airdroid (wifi) I can manage to copy things on my phone. The problem is that if this method doesn't work for me I will be unable to get it back as it is now, and besides USB everything works perfectly
I think the recovery can be flashed trough terminal emulator without PC, but then how to install the rom?
edit: solved
http://forum.xda-developers.com/showthread.php?p=50379619

different usb cables
Mine is not even recognized in the device Manager. i tried using different usb cables, clean the ports, nothing happens. I also tried updating the OS to Lollipop but still USB is not recognized by the computer. Any other options?

I have the same issue. I don't know what it is or why but God it is frustrating.

usb not recognized
Turn off the phone and thoroughly clean the port on it. I've seen it happen quite a lot, fluff just gets compacted and stuck and breaks contact with enough pins to cause this.

this works for me on samsung tab A
https://forum.xda-developers.com/ga...rging-recognize-android-t3787571#post76460493

[Update][S/W stuck rescue]Ultimate rescue guide

First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way. < should work for : 3GQCT : wParam = 2010, lParam = 210 >
Edit 1/4/2015. New method:
< Make a cable like this or buy a USB-Y cable, and try to flash with it >
http://bit.ly/1ImTveS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why? Because Optimus 4x needs more power for flash. Also, try to play with battery if you are still stucked. How?
Start to flash without battery inside, wait 5-10 seconds after flash starts, put the battery.
If you don't have luck, combine with the old one:
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.

okay. i'll try this now.. as a last resort..

confused
take a look at the picture..

Mine phone was start automatically on S/W.
You can let the board and try with it connected. Should work.

well flashed with ics :laugh:
thank you dude :good:
but after i tried to flash v20c latest, it wouldn't flash.. stops at 17 seconds.. error code(207)...
LOG attached..

After a lot of tries finally managed to flash latest v20c(germany). But sadly, that didn't fix anything..

adryyy said:
First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way.
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.
I'll add images if someone is interested.
Click to expand...
Click to collapse
I suspect the problem comes from the sim holder or antenna(the white cable) , if you still have you phone opens then try to disconnect only one of them and flash normally.
I did have same problem with the signal and magically it's gone... but my wifi lost it MAC.... in that case I just run a script to fake one and it works
anw, I also have the 10% stuck, I used the LGFlashTool2014 (somewhere in the forum, sorry) and did a clean flash V20A with CDMA setting (???) and it passed the 10% error
FYI: link for the tool
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar

I have the same issue, I followed this guide and all others very carefully and still no luck.
Thanks for the effort.:crying:

I've updated the guide. Try it .
New solution will work 90% of time.

i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.

jocrod said:
i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.
Click to expand...
Click to collapse
You should buy a USB Y cable ( http://www.nevacell.com/nevacell/images/UTStarcom/Cable/YC150B/USB_Y_Cable.JPG ) and put one USB in wall plug charger.

same issue
please help me.. my lg seems hang logo.. then i try to flash... same issue.. log 2010

I solved the issue by using the following solution: [Q] How to unbrick? (Stuck at S/W update mode)

hello, i bought this usb y-cable and im still stuck on error 210 i tried almost everything every method and nothing works im always stuck
at s/W update mode and b2cappsetup recognizes my p880 as lge455 and says v20c youre on the newest firmware
do you have another method for me ?
thanks in advance

Hard Bricked ALE-l21

So last night I created a flashable zip from the UPDATE.APP with the Huawei update extractor tool. I flashed it with TWRP it flashed everything but at the end it said it was unable to mount /system. I rebooted but nothing happened. Now when I try to power on the phone the notification led blinks one time red two times green and nothing appears on screen. I can't enter recovery, fastboot or anything else.
Anyone have any idea what can i do?

Looks Bad ?
Gesendet von meinem hi6210sft mit Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
Works ADB?

Maybe u have already tried but can you manually start fastboot mode? Power button + Volume down + usb cable?
If it enters fastboot mode, flash stock recovery, BOOT.IMG, CUST.IMG, and SYSTEM.IMG.
I've never heard of a flashable zip that actually worked for P8 Lite

Does your pc detect the phone when you connect it to usb? You can try another usb port and look into device manager.
If it detects anything, then try
Code:
adb devices
to see if there's anything. If adb finds a device
Code:
adb reboot-bootloader
to get into fastboot mode and then you can flash boot.img, cust.img, recovery.img and system.img.
You can also try to boot into fastboot mode directly (it may work, even if you don't see anything on the screen) and try
Code:
fastboot devices
if it was detected. If it was, you can flash the img's.
If nothing of the above works, send the phone into warranty and act dumb ("it was off when i woke up and it doesn't turn on anymore even if i charge it for hours" for example, don't mention the bootloader, flashing stuff, twrp, etc.); the chances are that they will replace your motherboard or give you a new phone.
Good luck.

I will probably send the phone in warranty.

Hello,
I have the same problem, and i also want to send it back as a case of warranty, does it work for you? Did you get a new Phone, or did they fix it?
Wish you a nice day,
thanks for your answer!

I'm having the same problem...
Weird red LED patterns...reboots, doesnt turn off (consequence, always very low battery), only huawei logo for eternity....
Usb on or off on the phone with the VOL DOWN + POWER, doesnt go to fastboot...
Anything works...
Sugestions? Thank you!

As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.

spirto82 said:
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
Click to expand...
Click to collapse
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial

Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
Click to expand...
Click to collapse
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21

spirto82 said:
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
Im on B052 ROM working good, I guess im good from now
Thank you

I also got the same problem don't know what tried fastboot multiple times

if u still have the problem,
just disconnect the battery " not easy work :3 " .. reconnect it
HOLALALA.. your phone works now ..
you can see a post for me in this forum and some guy helped me ..

i,m also stuck at same position..
when i connect and wait , after led's stop blink, my device connected with PC
with unknown drivers written chinese language.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help please..

Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Click to expand...
Click to collapse
Hey dude! I have the same issue from same mistake now, how did you enter fastboot? What buttons did you use, did you have your battery unplugged? I've been trying everything for hours now but no luck...
Cheers, hope you see this post!

Mi A2 (JASMINE) Not read fastboot or usb debugging or media in pc

Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx

robin_vilensky_ said:
Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx
Click to expand...
Click to collapse
Just to exclude the easy possibilities:
From your phone's status bar drop-down menu, does it say "charging via usb"? If so, you need to change that to "media transfer" (or something alike).
As for fastboot, this wouldn't actually be nessecary though. Here just make sure you open cmd as an administrator (on Windows, which I assume you're using, since you mention a device manager - on linux you would need to be root).
And, did you activate usb debugging in the developer settings already?
Maybe also do a windows update with your device connected, if still no go.

I have the same problem. I've tried everything without result.

You guys need to give more detailed information, if you want more detailed help..
What ROM are you on?
List everything that is not working.
List your installation procedure.
When did the problem occur for the first time?
What exact steps did you already try?
Which software versions are you using?
For instance using an older fastboot version may result in many problems, but one can only blindly guess with that little concrete info.
If I had such general issues somewhat relating to storage though, I personally would wipe my entire phone in both slots and format data (if you can somehow enter recovery without fastboot ofc, like from a terminal emulator app or via an extended reboot menu present in many custom ROMs).
Oh, and is adb working?

I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Badotti said:
I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
Click to expand...
Click to collapse
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?

Phil_Smith said:
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?
Click to expand...
Click to collapse
fastboot does not detect the phone, neither on windows nor linux .. not even mi suite does, there are several people with the same problem in mi A2 lite and mi A2 too ... it seems like it was after the October update.

Hello! I have a similar problem. did you find a solution?