Related
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
donk232 said:
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Make sure you are using the oem usb cable. I had the same problem, changed cables and it worked
some cheap cables are for charging ... bt headsets and other stuff the data cables dont connect, its just for power.
koreancanuck said:
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
donks232 said:
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
Click to expand...
Click to collapse
You gotta make sure that your usb port is directly connected to your motherboard (usually back of your computer).
same usb port that has always worked. ive tried them all by now anyway
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
donks232 said:
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
Click to expand...
Click to collapse
lolol
Duno what happened but I'm glad it worked out for you
I'm having the same problem with my captivate after flashing REDROM. It won't recognize it if I have USB debugging turned on...
i have a theory... were you on a GB or other i9000 based rom/kernel???
well, im still having a problem getting my computer to recognize the phone, i have to mess with it for a a while to get it to work. i really want to flash anew 2.3.3 rom but without being able to get everything working right im stuck in 2.1
is this a problem with my cord or the connection on my phone? or something weird with my phone after flashing it a lot. its currently back to odin stock, i have been trying to master clear it with no luck
TRusselo said:
i have a theory... were you on a GB or other i9000 based rom/kernel???
Click to expand...
Click to collapse
continiuum miui and cyanogen mod are the only things ive tried to flash
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Guys, this problem while connecting to the PC body is stupidly charging .... Even in the download mode Odin does not see a body that could be? Connect other Cappy-all OK.
donks232 said:
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Click to expand...
Click to collapse
it must be a powered usb hub, on my buddies laptop only 1 out of 4 usb ports saw his phone.
if you can get into download mode you arent bricked.
try installing i9000 drivers, or try another computer.
I came up with this a while back. Could very well be the same issue.
Let me start by saying I'm flash happy, and everyone that knows me personally, tells me to just quit jacking with my phone. NOT A CHANCE! I'm on my 3rd Cappy and shouldn't have ever exchange it again. I only had to in the beginning, because I was a newbie and had not know enough, but to get me in trouble.
I presume that this should work on all Windows OS's. I personally am running Vista Enterprise x86.
My symptoms:
Plug in phone to the usb and it there was about a 15% chance off being able to mount to usb, and Windows recognizing as a mass storage device. I tried un-installing drivers and re-installing and it would work some of the time, until the point came when parts of the driver install would fail. Then to the point when it was just completely unrecognizable. I thought I had it fixed because it seemed intermittent. In the middle of flashing to stock, something interrupted communication between the pc and my phone. Restarted the phone and attempted the flash again. Got a little farther and froze again. I had to use another pc that I had never connected my phone to before and I was able to use my jig to trigger download mode, because no buttons combinations would allow it into download mode.
This got me thinking that it was specific to my pc and not my cable or my phone.
My resolution:
I went straight to the registry and went to find. I deleted every entry that came up for "i897" and "i9000" excluding what was listed in the system volume information, as I didn't have permissions to remove any keys. I didn't keep count, but I probably deleted 300-400 registry keys that pointed to my phone. It seems as if with each developers rom that I had flashed, there was an entry for a different device. Don't quote me on that, because it is just my personal consensus. I also un-installed the samsung drivers, the unknown device driver, kies software, and anything associated with samsung. I noticed that next to all of the i9000 instances, the hex key for me started with 1000ee. So I also searched for the first part of that key trying to ensure that all instances of the device. Lastly, I deleted the samsung folder from program files.
I installed the samsung drivers package commonly listed in all of the other threads for x86 operating systems. I plugged in my phone and watched as each and every driver installed successfully. Keep in mind different drivers are installed depending on if you have usb debugging on/off, and the options for if the preferences on you phone are set to media, storage, or kies. I have multiple usb ports, however testing has shown me that, for me and my setup, I can plug into the port that I used when installing the drivers the final time, I am able to connect consistently. Earlier today, I tried to plug into a different usb port and it was an unknown device. I am led to believe, this is because I didn't un-install the unknown device on this particular port.
If you intend to work in the registry, please remember to always back it up first. You can always restore.
Hopefully my findings can help you as they did me. Happy flashing and I would like to thank the community for the dedication to assisting each other and the developers, for making flashing, better than crack cocaine. Flashing rom's doesn't make you twitch near as much as a crackhead.
Well since you can't use your phone you should sell it to me
Sent from my GT-I9000 using XDA Premium App
I didn't even install drivers, ubuntu got them for me
Sent from my SGH-I897 using XDA Premium App
Alright, so before I get flamed, I have searched for over an hour today, and I have not been able to figure this out. I am not new to android, rooting, custom roms, and editing files, so I have tried a multitude of different things.
To the point, my Droid 3 will not connect to my computer. It did a couple weeks ago when I flashed the Liberty Rom onto it, but now it'll just charge and not go into the USB mode. The only reason I know it is charging is when I disconnect the cord it says the disconnected message.
I have tried a couple different cables, and I usually use my stock cable that came with my D3. I have also tried restarting my phone and computer. I even flashed the newest Liberty Rom the hard way and still no luck.
If someone could please help me out I would be VERY grateful as this is a PITA!!!
Thanks in advance!
My two cents would be, try different usb port and make sure you have the most current moto drivers.
Have had luck with uninstalling driver pack and reinstalling.
Hope that helps.
Sent from my DROID3 using XDA App
I appreciate the help, unfortunately uninstalling the drivers didn't work, unless I didn't get the correct drivers? I went into uninstall programs. In the device manager nothing came up for my phone or drivers. And I have also tried different ports but to no luck. Thanks again for the reply.
Have you tried a different computer? A different device? Let's just rule out that this isn't a computer issue first...
My Zune works in all of my ports, and my other computer. My Phone however does not. It does the same thing as my other computer, although I guess I don't have the drivers on the other computer, but it would still come up as usb connection right? All this does is charge, sometimes.
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
eww245 said:
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
Click to expand...
Click to collapse
Can you explain?
("Very Important"!) PLEASE POST!!!
After sufferring through the same issue and delving deeply for almost two days,I have found the culprit!!! IT IS THE USB CORD AND NOT THE DRIVERS OR ANYTHING ELSE!!"SIMPLY USE THE FIRST USB CORD THAT YOU USED THE VERY FIRST TIME YOU PLUGED INTO YOUR COMPUTOR AND THAT WILL RECTIFY(FIX) YOUR PROBLEM.(IT HAS TO BE THE VERY FIRST USB CORD OTHERWISE YOU WILL CONTINUE TO HAVE THIS PROBLEM UNTIL AND NO OTHER COMPUTOR WILL RECOGNIZE YOUR DEVICE UNTIL YOU DO WHAT I SAY.I thought it was the rooting of my phone that initially caused the issue or maybe an app,however,I found the culprit.The usb cord!!!(WHATEVER USB YOU USED FOR THE VERY FIRST ,STOCK OR NOT,IT IS THE ONLY ONE YOUR COMPUTOR WILL RECOGNIZE!!! I HOPE THIS HELPS THE MANY OF YOU THAT ARE HAVING THIS SAME ISSUE AND GOOD LUCK
Sent From My Droid 3 using TapaTalk
xFreak-a-Zoidx said:
RECTIFY(FIX)
Click to expand...
Click to collapse
Thanks for clearing that up for me, I haven't competed the fourth grade.
Dude could've just said use the USB cord that came with the phone, to each his own. I have 6 micro usb cables and only the moto official will allow me to do anything other than charge the phone via cpu.
Sent from my DROID3 using XDA App
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
ajgates92 said:
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
Click to expand...
Click to collapse
That sucks. You can find the .890 sbf floating around in android development and flash it, I believe it takes everything to stock including unroot.
Sent from my DROID3 using XDA App
I looked in the thread posted, but the link to the flashable zip is down. So i'm stuck at a standstill right now.
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
blmetzger said:
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
Click to expand...
Click to collapse
Can I flash that wit cwm or the stock recovery though? I can't use RSD or fastboot because nothing happens when I plug my usb into it.
Hello everyone,
I've done quite a lot of searching, and I can find almost no one else with the same issues.
Basically, when I plug in the phone via usb, the computer will not recognize the device. I have tried every mode (mass storage, kies, usb debug, etc). However, it will charge. I have tried several cables, including those I know transfer data. When I try to put it into mass storage mode, I do not get a notification on the notification bar telling me to mount the SD or USB storage. I'm not sure if this is a hardware & software issue, or just one of the two.
I work in IT, so I'm not new to repairing hardware or software. Just trying to find SOME leads. The guy who owned this before me didn't do a great job of putting the phone back together when he tried to repair the screen (has a greenish tint, thought it was a loose connection but it may just be defective or needs to be cleaned. Either way, not my concern as of right now).
If anyone has any suggestions, it would be greatly appreciated
PS I have tried SEVERAL drivers on SEVERAL computers, Win7, Win8, OSX Lion, Lubuntu 12.10
Also tried putting the phone in Download mode to see if Odin/heim-something or other would recognize it, no luck.
Wondering if the usb isn't fully connected to the port, and if I should take off the back housing, plug it in, and see if it works that way?
x0ne215 said:
Hello everyone,
I've done quite a lot of searching, and I can find almost no one else with the same issues.
Basically, when I plug in the phone via usb, the computer will not recognize the device. I have tried every mode (mass storage, kies, usb debug, etc). However, it will charge. I have tried several cables, including those I know transfer data. When I try to put it into mass storage mode, I do not get a notification on the notification bar telling me to mount the SD or USB storage. I'm not sure if this is a hardware & software issue, or just one of the two.
I work in IT, so I'm not new to repairing hardware or software. Just trying to find SOME leads. The guy who owned this before me didn't do a great job of putting the phone back together when he tried to repair the screen (has a greenish tint, thought it was a loose connection but it may just be defective or needs to be cleaned. Either way, not my concern as of right now).
If anyone has any suggestions, it would be greatly appreciated
PS I have tried SEVERAL drivers on SEVERAL computers, Win7, Win8, OSX Lion, Lubuntu 12.10
Also tried putting the phone in Download mode to see if Odin/heim-something or other would recognize it, no luck.
Wondering if the usb isn't fully connected to the port, and if I should take off the back housing, plug it in, and see if it works that way?
Click to expand...
Click to collapse
Other than charging, when you connect to a pc do you get a device malfunction message in windows? We know the +5v and ground work since it charges so if you get the malfunction message in windows its a short in the data pins. If there is no message, just charging and no reaction from the phone other than the charging indicator, I'd say there is no contact to one or both data pins. I'd look in the micro usb port to make sure the pins are straight (and there lol) and if it looks dirty, use a shot of crc electronic cleaner in the port (battery out and screen facing up).
Of coarse this is if it isn't software related which it very well could be, but sounds more hardware related to me....
rmntruexjr said:
Other than charging, when you connect to a pc do you get a device malfunction message in windows? We know the +5v and ground work since it charges so if you get the malfunction message in windows its a short in the data pins. If there is no message, just charging and no reaction from the phone other than the charging indicator, I'd say there is no contact to one or both data pins. I'd look in the micro usb port to make sure the pins are straight (and there lol) and if it looks dirty, use a shot of crc electronic cleaner in the port (battery out and screen facing up).
Of coarse this is if it isn't software related which it very well could be, but sounds more hardware related to me....
Click to expand...
Click to collapse
Yep, that's exactly what pops up. I can't see very well right now (at work, have no magnifying glass here). I remember a long time ago having a couple bent data pins in my old BlackBerry Curve lol, ended up popping em back in. Hopefully, that will be the same case here.
I appreciate the quick reply, wasn't even thinking of that :fingers-crossed:
x0ne215 said:
Yep, that's exactly what pops up. I can't see very well right now (at work, have no magnifying glass here). I remember a long time ago having a couple bent data pins in my old BlackBerry Curve lol, ended up popping em back in. Hopefully, that will be the same case here.
I appreciate the quick reply, wasn't even thinking of that :fingers-crossed:
Click to expand...
Click to collapse
No problem:good: Good luck!!:fingers-crossed:
On a slightly-unrelated note, did some browsing and came up with this quick question.
Is there anyway to root the Captivate on 2.3.5 without PC connection? (I can send files to the phone via an external SD, just can't use Super One Click etc right now).
If not, couldn't I just flash back to 2.2 using recovery(stock, but as long as the update.zip signed correctly[will be stock firmware so I don't see why it wouldn't] it should work right?) and use z4root?
Well, to follow up:
I see no broken or misplaced pins, it all looks correct to me. I will try to upload a photo tonight.
In the meantime, I managed to brick (I think). Accidentally installed the wrong kernel from my SD (speedmod, which I forgot was for Froyo). Now I have CWM, but I cannot mount via usb still, and since I can't access the external sd from cwm, I'm stuck either in recovery mode or stuck at the Samsung screen.
Anyone have any ideas besides just setting it aside for a paper weight?
x0ne215 said:
Well, to follow up:
I see no broken or misplaced pins, it all looks correct to me. I will try to upload a photo tonight.
In the meantime, I managed to brick (I think). Accidentally installed the wrong kernel from my SD (speedmod, which I forgot was for Froyo). Now I have CWM, but I cannot mount via usb still, and since I can't access the external sd from cwm, I'm stuck either in recovery mode or stuck at the Samsung screen.
Anyone have any ideas besides just setting it aside for a paper weight?
Click to expand...
Click to collapse
Does that version of cwm have the option to flash from ext sd? Go to install zip in cwm and see if there is the option to flash zip from extsd. If so, then you should be all set putting the right kernel or rom on your ext sd and flash away. Not sure I'm the best person to answer your question, but I would start there I guess.
x0ne215 said:
Hello everyone,
I've done quite a lot of searching, and I can find almost no one else with the same issues.
Basically, when I plug in the phone via usb, the computer will not recognize the device. I have tried every mode (mass storage, kies, usb debug, etc). However, it will charge. I have tried several cables, including those I know transfer data. When I try to put it into mass storage mode, I do not get a notification on the notification bar telling me to mount the SD or USB storage. I'm not sure if this is a hardware & software issue, or just one of the two.
I work in IT, so I'm not new to repairing hardware or software. Just trying to find SOME leads. The guy who owned this before me didn't do a great job of putting the phone back together when he tried to repair the screen (has a greenish tint, thought it was a loose connection but it may just be defective or needs to be cleaned. Either way, not my concern as of right now).
If anyone has any suggestions, it would be greatly appreciated
PS I have tried SEVERAL drivers on SEVERAL computers, Win7, Win8, OSX Lion, Lubuntu 12.10
Also tried putting the phone in Download mode to see if Odin/heim-something or other would recognize it, no luck.
Wondering if the usb isn't fully connected to the port, and if I should take off the back housing, plug it in, and see if it works that way?
Click to expand...
Click to collapse
Just to verify, you have tried these particular usb drivers? http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897#USB_Drivers
x0ne215 said:
On a slightly-unrelated note, did some browsing and came up with this quick question.
Is there anyway to root the Captivate on 2.3.5 without PC connection? (I can send files to the phone via an external SD, just can't use Super One Click etc right now).
If not, couldn't I just flash back to 2.2 using recovery(stock, but as long as the update.zip signed correctly[will be stock firmware so I don't see why it wouldn't] it should work right?) and use z4root?
Click to expand...
Click to collapse
U can't get Root for a Captivate running Android 2.3.5 without a proper working micro usb port.
U can't flash back to Stock Froyo without a proper working micro usb port. (Unless u had Root already and then u could use Mobile Odin from the Play Store).
Only update.zip files signed by Samsung would work in the Stock 3e Recovery.
Stock Eclair had the 2e Recovery that did not require the signature verification.
Sounds like u need a new micro usb port.
Did u take a read at this thread...Captivate - PC Connection Issues...
If that thread is no help then it probably is a hardware issue. :/
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
U can't get Root for a Captivate running Android 2.3.5 without a proper working micro usb port.
U can't flash back to Stock Froyo without a proper working micro usb port. (Unless u had Root already and then u could use Mobile Odin from the Play Store).
Only update.zip files signed by Samsung would work in the Stock 3e Recovery.
Stock Eclair had the 2e Recovery that did not require the signature verification.
Sounds like u need a new micro usb port.
Did u take a read at this thread...Captivate - PC Connection Issues...
If that thread is no help then it probably is a hardware issue. :/
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
1. Yes, actually you can. It's a temp root, but it works (how else would I have been able to flash the wrong kernel). I forget the apk I used, not on market anymore. I think it was like Mizu m9 or something, actually worked was kind of surprised.
2. Stock 3e is nbd now, I can boot into CWM 2.5.1.0 [which does have boot from ext-sd, but it either says it can't mount it or no files found. Not sure if its a version issue, if I could mount it and access the files on the ext-sd somehow this would all be solved and I'd love you guys <3
Yeah, I looked into the new USB port thing.I've tried every driver known to man lol. I think I'll end up getting the port repaired from that one website that was suggested, I think its $35 or so no big deal.
But can anyone confirm that CWM 2.5.1.0 can read an ext-sd? It's odd, because I assume on the captivate it gets mounted at /sdcard/external_sd, and when I look for a zip file to flash from the sd, I can see that folder, but trying to go into it just causes the message "no files found"
Gonna check this meizu m9 root method out.... hmmm...
Sent from my SAMSUNG-SGH-I747 using xda premium
Go for it, once installed it's pretty straight forward lol. But make you you dl the superuser app from the market (I did it before, just in case that matters). Mobile odin worked fine, adb wireless worked fine, etc.
But I just tried partitioning my SD card, and it still won't read in CWM. I tried mounting /sd-ext but every time I do it just says Error: can't mount
Yeah...i'm just curious as to how that root method works...since a method like that (gaining Root without having to use a connection to a pc) has never been done before with the Captivate since its release.
Sent from my SAMSUNG-SGH-I747 using xda premium
I'm not really sure, I didn't think it would work but it did...not sure what exploit it uses either. Did you try it? Wanted to check if it was just my phone or others too...
Sent from my Rooted PantechP8000 using xda app-developers app
Nope...haven't tried it, but am definately gonna check into it. I will post back if it works or not (if i decide its ok to try) when i can... :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda premium
Gotcha, sounds good. Yeah not too sure if it's safe or not, was just trying anything.
On another note, what format does my SD card need to be in to be read by CWM Recovery? I had it set to exFat, Fat32, and ext2/fat32 and I still isn't being read or able to mount :\.
I was gonna say FAT32 full format as i have read that suggested by others, but looks like u tried that. The card may be bad...idk for sure though.
(Btw...would u mind attaching a copy of the meizu m9 root apk ? Thx.)
Sent from my SAMSUNG-SGH-I747 using xda premium
I may try fat32 again. Interesting though, I had a zip of another version of CWM on the INTERNAL SD which I CAN access.
When I install that (not really install it, just run it), I can mount sd-ext but not /sdcard/ lol...says it's busy...I'm starting to think this is a permissions issue more than anything.....
Sure, it's on my dropbox I can just download it quick and upload it here.
EDIT: idk what's with the extension on the file, should just put it on an sd card and install fine.
I have EXACTLY the same issue x0ne215, has you managed to resolve this issue? Or just replaced microusb?
TNK2005 said:
I have EXACTLY the same issue x0ne215, has you managed to resolve this issue? Or just replaced microusb?
Click to expand...
Click to collapse
The M9 root method did work afaik. That being said, it's not safe at all to flash with a broken USB port.
Sent from my SGH-I747 using xda app-developers app
We have two Galaxy S Captivates. One connects to the computer fine, the other no longer does.
First the phone started randomly rebooting or becoming locked up. Then we had external SD issue and couldn't mount the "emmc" which, since it was using Cyanogenmod 9, was the external_sd. Pretty soon the phone was stuck at the boot animation, wouldn't get any further. So obviously I needed to reflash it, but now suddenly the USB did not even work either (it only charges). I did a factory reset and was able to get back into the OS, but when I connect the USB cable, no message pops up to connect, no matter what setting I use.
So I did a CWM restore to a much older backup. But in that one, USB is not working either now too.
I don't think it's physical, it suddenly stopped as I was trying to fix it. So is there any way to do the kind of reflash Odin and Heimdall do, but without USB? I can solder if some sort of serial cable needs to be made..
Or perhaps, if I know what COMORT it's connected to, I can do a manual choose, instead of letting Odin do it automatically? Since I can connect my other Captivate and see the name of the port...
Many thanks, I hope I really hope I can get this fixed...
Kakkoister said:
We have two Galaxy S Captivates. One connects to the computer fine, the other no longer does.
First the phone started randomly rebooting or becoming locked up. Then we had external SD issue and couldn't mount the "emmc" which, since it was using Cyanogenmod 9, was the external_sd. Pretty soon the phone was stuck at the boot animation, wouldn't get any further. So obviously I needed to reflash it, but now suddenly the USB did not even work either (it only charges). I did a factory reset and was able to get back into the OS, but when I connect the USB cable, no message pops up to connect, no matter what setting I use.
So I did a CWM restore to a much older backup. But in that one, USB is not working either now too.
I don't think it's physical, it suddenly stopped as I was trying to fix it. So is there any way to do the kind of reflash Odin and Heimdall do, but without USB? I can solder if some sort of serial cable needs to be made..
Or perhaps, if I know what COMORT it's connected to, I can do a manual choose, instead of letting Odin do it automatically? Since I can connect my other Captivate and see the name of the port...
Many thanks, I hope I really hope I can get this fixed...
Click to expand...
Click to collapse
This would be the first step: http://forum.xda-developers.com/showthread.php?t=1953930
BWolf56 said:
This would be the first step: http://forum.xda-developers.com/showthread.php?t=1953930
Click to expand...
Click to collapse
Thanks, but I've read that whole post. I've tried all possible regular solutions you can find around the net. My main question now is, is there a way to flash all those core components without using Odin or Heim. Can I use my CWM? Or perhaps ADB? Is there a way to specify a specific COMORT I'd like to connect to? Or any more tech savvy solutions like a serial cable connection? I need a solution for flashing without Odin or Heimdall.
Kakkoister said:
Thanks, but I've read that whole post. I've tried all possible regular solutions you can find around the net. My main question now is, is there a way to flash all those core components without using Odin or Heim. Can I use my CWM? Or perhaps ADB? Is there a way to specify a specific COMORT I'd like to connect to? Or any more tech savvy solutions like a serial cable connection? I need a solution for flashing without Odin or Heimdall.
Click to expand...
Click to collapse
Not on the Captivate. Everything is done by Odin or Heimdall using the usb port. There's a mobile Odin but it doesn't flash bootloaders and you can't get root with it.
Have you tried cleaning the usb?
Either fix the USB by cleaning it or replacing the port, or have fun with a barely usable Captivate :\. I don't understand why they made the port so flimsy if it was such an important part of the phone, seems kinda dumb imo.
If you do happen to find a fix, please let me know, kind of in the same boat .
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
mrmazak said:
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
Click to expand...
Click to collapse
I tried with diferents usb cables, and nothing happened.
mykrov said:
I tried with diferents usb cables, and nothing happened.
Click to expand...
Click to collapse
Do you know if any of them are sync cables??
codyalan said:
Do you know if any of them are sync cables??
Click to expand...
Click to collapse
They are USB cables that i use on others phones (lg 4x HD and Honor 6X) and work fine with those phones but not on my R1Hd
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
elcarmi said:
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
Click to expand...
Click to collapse
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
mykrov said:
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
Click to expand...
Click to collapse
As far as I know downgrading is not possible without making the phone unusable. If by any chance that is possible maybe an update from an SD Card can work.