Related
Well my problem is that I flashed my Gnote with ICS and now seems to be a problem with the kernels ( i read it here http://forum.xda-developers.com/showthread.php?p=26272631 )
So as that thread says, now i have to change the kernel by flashing with odin/heimdall, but i wanted to ask you guys if any kernel will work with my rom or not... and if you can give me a link with a safe one (i didn't find any link to say that is safe, although i have to confess that i haven't searched too much neither ) I have this ROM http://forum.xda-developers.com/showthread.php?t=1589375 but v01 and i'll upload a screencapture with the system info because i think that would be useful.
Thank to evereybody and lets hope that the problem is going to be fixed soon
SloanRH4 said:
Well my problem is that I flashed my Gnote with ICS and now seems to be a problem with the kernels ( i read it here http://forum.xda-developers.com/showthread.php?p=26272631 )
So as that thread says, now i have to change the kernel by flashing with odin/heimdall, but i wanted to ask you guys if any kernel will work with my rom or not... and if you can give me a link with a safe one (i didn't find any link to say that is safe, although i have to confess that i haven't searched too much neither ) I have this ROM http://forum.xda-developers.com/showthread.php?t=1589375 but v01 and i'll upload a screencapture with the system info because i think that would be useful.
Thank to evereybody and lets hope that the problem is going to be fixed soon
Click to expand...
Click to collapse
Flash this kernel to be on a safe kernel flash via Odin http://forum.xda-developers.com/atta...4&d=1337346991
Read here http://forum.xda-developers.com/showthread.php?t=1627854
the first link doesnt work, and about the second, what you want me to say is that is ok to flash the kernel they recommend there via odin and no need to change my rom right?
really thank you i was pretty worried about this problem...
WAIT
I think you should go back to stock GB and then use one of the safe kernels to install an ICS rom, like CM9.
I'm really a bit confused but this is from what I understand.
I still don't know what to do... does the kernel have to be combatible with the rom or it doesn't matter which ROM i'm on? for now i want to keep this ROM because works really good or to get the original ICS... so guys what do you say? Is it ok if i flash the kernel that brockyneo told me?
I would reccomend flashing the latest cm9 nightly as the rom your using is a old unoffical version of it. In order to do this flash the kernal i have attached via mobile odin (your phone will NOT boot using this kernal so make sure you go into recovery). Then flash the abyss note kernal via cwm, after which go into advanced and reboot recovery. Then in this recovery you can flash the CM9
Hope that helps
I recently upgraded my Note to official ICS (OTA) and I'm not liking it AT ALL! Now I really want to get far away from this update as possible and I'd like to switch to a CM9 nightly Rom. I've that now that I have upgraded to the official ICS Rom, I run the risk of super bricking my device. So now I ask you to help me make sure the following is correct so that I may move on from this wretched update:
DO NOT perform wipes if you are on original Samsung ICS
DO NOT perform wipes if you are on a original Samsung kernel??
Flash back to original Gingerbread Rom using odin BEFORE flashing to CM9
Flash to different kernel??
I've flashed millions of Roms but this one is scary and I just want to make sure haven't missed anything... Have I?
Thanks for you help!!
John J
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Akiainavas said:
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Click to expand...
Click to collapse
Thanks a lot man!! This is pretty much what I thought but I wanted to make ABSOLUTE sure! Cheers!
John J
So is the super-brick BUG on the official ICS OTA?? OMG
And yeah go back to gingerbrear via odin, get root then flash any CM9 tru CWM no problems...
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
darkmuck said:
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
Click to expand...
Click to collapse
There is no need to unroot first. You can flash stock GB rom directly via Odin.
I've now flashed to GB but before I move on to a CM9 nightly, do you recommend I flash the CM9 kernel as well? Seems like it is not a prerequisite but I would like to make sure. Thanks.
John J
afaik, when flashing a CM9 Nightly, the eligible kernel is built in, so no need to flash anything but the ROM.
i'm on one of imilkas first CM9 port and it says [email protected] #1 under Kernel version in settings.
Yes. The correct kernel is included in the nightly.
Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.
I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
my suggestion is: until you feel perfectly safe, don't take shortcuts (unless explicitly suggested by ROM/kernel developer),
I mean, flashing full GB to flash another ROM, may seem a waste of time, as there are faster methods (e.g.via abyss), but why take the risk?
to answer your question, afair franco kernel should have the fatal command disabled, but check in his thread to be absolutely sure
criskelo rom
the criskelo rom is kl
p107r0 said:
my suggestion is: until you feel perfectly safe, don't take shortcuts (unless explicitly suggested by ROM/kernel developer),
I mean, flashing full GB to flash another ROM, may seem a waste of time, as there are faster methods (e.g.via abyss), but why take the risk?
to answer your question, afair franco kernel should have the fatal command disabled, but check in his thread to be absolutely sure
Click to expand...
Click to collapse
I wouldn't know what I should be looking for tbh, does he still post on the thread? I guess I could ask on the thread, as I assume it has hundreds of posts on there to wade through lol thanks
It's just my initial thought was it's the kernel that makes it dangerous, and not ics itself...
mrcarlxx said:
I wouldn't know what I should be looking for tbh, does he still post on the thread? I guess I could ask on the thread, as I assume it has hundreds of posts on there to wade through lol thanks
It's just my initial thought was it's the kernel that makes it dangerous, and not ics itself...
Click to expand...
Click to collapse
yes, it's the kernel, as for franco's thread (don't use in now and don't want to trust my memory) search it for emmc_cap
mrcarlxx said:
I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
Click to expand...
Click to collapse
safest way is to flash from GB. Its easier to brick your phone when flashing from ics which is what i did. Its better being safe than sorry
mrcarlxx said:
I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
Click to expand...
Click to collapse
Quite a few custom Roms require you to install from gb, not because of the kernel issues, but for other reasons which I'm not too clear on. For instance if you flash paranoid over Ics rom with safe kernel, chances are you'll brick. Always follow the rom threads directions, never try shortcuts and 99% of the time you won't have any issues at all.
Sent from my GT-N7000 using xda premium
Alright, but don't you have to flash GB using PC Odin, or can I use mobile Odin? Or can I use cwm?
It's recommended to use PC odin although I think it's okay from mobile odin also. I wouldn't use cwm as that utilises the existing kernel.
Sent from my GT-N7000 using xda premium
Alright I will look into using PC Odin.... This should be fun lol
You do not really have to flash the full rom. Just flash via mobile odin the abyssnote 39 or 42, reboot to that kernel and flash your custom rom via cwm.
I have flashed stock gb and/or ics back and forth from within mobile odin without issues.
Sent from my GT-N7000 using xda app-developers app
IsmailZU said:
safest way is to flash from GB. Its easier to brick your phone when flashing from ics which is what i did. Its better being safe than sorry
Click to expand...
Click to collapse
+1 (till the eMMc and other bricking issues are sorted out.
praetorius said:
You do not really have to flash the full rom. Just flash via mobile odin the abyssnote 39 or 42, reboot to that kernel and flash your custom rom via cwm.
I have flashed stock gb and/or ics back and forth from within mobile odin without issues.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Where did you get the GB rom from? Was it from the stock rom thread on here? And where did you get the kernel, I think I may have seen it on download Android rom .com...
I have my ics backed up on my sd card, so if I want to go back to ics can I just use the backup instead of finding the ics rom?
dsmas said:
+1 (till the eMMc and other bricking issues are sorted out.
Click to expand...
Click to collapse
Do you think they will ever be sorted out? The phone has been out a while now lol
Haha just had the freight of a life time, just flashed abnote through mobile Odin and the phone got jammed at the Samsung boot screen...lucky this time I have cwm fully installed and went right back to Franco...
LOL
Never used PC odin for flashing any roms, only used Abyss kernel 4.2 flash into recovery of abyss and flash any rom and enjoy i have been jumping from rom to rom through abyss kernel No issues till date all well and good, never flashed anything from any ICS kernels or even CM9 kernels, only abyss kernel to be ultra safe.
bhasg1007 said:
Never used PC odin for flashing any roms, only used Abyss kernel 4.2 flash into recovery of abyss and flash any rom and enjoy i have been jumping from rom to rom through abyss kernel No issues till date all well and good, never flashed anything from any ICS kernels or even CM9 kernels, only abyss kernel to be ultra safe.
Click to expand...
Click to collapse
It won't let me install abyss kernel for some reason...both files through Odin and through cwm but it just gets stuck on the boot screen so keep having to go back to Franco....bummer :-(
SpyderTracks said:
It's recommended to use PC odin although I think it's okay from mobile odin also. I wouldn't use cwm as that utilises the existing kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Why not make a backup in recovery when on stock GB?This way you can restore easily no odin what so ever needed!
It is safe to restore even on ICS (or at least stock ics) right?
Can restore cause brick?(this has always been a puzzle to me)
galaxynotes said:
Why not make a backup in recovery when on stock GB?This way you can restore easily no odin what so ever needed!
It is safe to restore even on ICS (or at least stock ics) right?
Can restore cause brick?(this has always been a puzzle to me)
Click to expand...
Click to collapse
Apparently it can even if your not rooted or touched your phone in any way...
mrcarlxx said:
Haha just had the freight of a life time, just flashed abnote through mobile Odin and the phone got jammed at the Samsung boot screen...lucky this time I have cwm fully installed and went right back to Franco...
LOL
Click to expand...
Click to collapse
Thats bcoz abyss is gb kernel its normal you cannot boot ics.
Use abyss to flash OTHER roms from cwm.
Sent from my GT-N7000 using xda app-developers app
Getting sick of the ICS battery and kernel issues and have decided to clean out the phone and install everything fresh.
I am currently on an unrooted stock ICS ROM (N7000XXLRK) and understand that I should go back to a GB ROM first then install ICS. I will search on here for a guide on how to do it (links welcome ) but am confused as to which ROM I should use of the many stock ROMs posted on here.
Since I am going to do a clean install, is it worth going back to the XXLRK ROM or is there an improved one which has sorted the battery kernel issues out? Which GB ROM can I safely go back to without confusing things before I reflash ICS?
Is it recommended that anything else is added or flashed while I have the hood up? Unless there is an uber stable custom ROM I want to stay stock, but will want to root it.
jazzdude555 said:
Getting sick of the ICS battery and kernel issues and have decided to clean out the phone and install everything fresh.
I am currently on an unrooted stock ICS ROM (N7000XXLRK) and understand that I should go back to a GB ROM first then install ICS. I will search on here for a guide on how to do it (links welcome ) but am confused as to which ROM I should use of the many stock ROMs posted on here.
Since I am going to do a clean install, is it worth going back to the XXLRK ROM or is there an improved one which has sorted the battery kernel issues out? Which GB ROM can I safely go back to without confusing things before I reflash ICS?
Is it recommended that anything else is added or flashed while I have the hood up? Unless there is an uber stable custom ROM I want to stay stock, but will want to root it.
Click to expand...
Click to collapse
The way i do it is flash abyss kernel 4.2 http://www.mediafire.com/download.php?uac8zbzhbiuut0t and then reboot recovery and flash the rom you like by doing all the 3 wipes because i start fresh with every rom i try.
vivek2701 said:
The way i do it is flash abyss kernel 4.2 http://www.mediafire.com/download.php?uac8zbzhbiuut0t and then reboot recovery and flash the rom you like by doing all the 3 wipes because i start fresh with every rom i try.
Click to expand...
Click to collapse
Sorry for asking but why flash Abyss-kernel when " jazzdude555" write he is going back to GB?
If he flash GB then he will wipe there and thats safe.
Read 'ROM switchover' on my signature.
http://forum.xda-developers.com/showthread.php?t=1837756
Duplicate content?
Sent from my GT-N7000 using Xparent ICS Tapatalk 2