I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
my suggestion is: until you feel perfectly safe, don't take shortcuts (unless explicitly suggested by ROM/kernel developer),
I mean, flashing full GB to flash another ROM, may seem a waste of time, as there are faster methods (e.g.via abyss), but why take the risk?
to answer your question, afair franco kernel should have the fatal command disabled, but check in his thread to be absolutely sure
criskelo rom
the criskelo rom is kl
p107r0 said:
my suggestion is: until you feel perfectly safe, don't take shortcuts (unless explicitly suggested by ROM/kernel developer),
I mean, flashing full GB to flash another ROM, may seem a waste of time, as there are faster methods (e.g.via abyss), but why take the risk?
to answer your question, afair franco kernel should have the fatal command disabled, but check in his thread to be absolutely sure
Click to expand...
Click to collapse
I wouldn't know what I should be looking for tbh, does he still post on the thread? I guess I could ask on the thread, as I assume it has hundreds of posts on there to wade through lol thanks
It's just my initial thought was it's the kernel that makes it dangerous, and not ics itself...
mrcarlxx said:
I wouldn't know what I should be looking for tbh, does he still post on the thread? I guess I could ask on the thread, as I assume it has hundreds of posts on there to wade through lol thanks
It's just my initial thought was it's the kernel that makes it dangerous, and not ics itself...
Click to expand...
Click to collapse
yes, it's the kernel, as for franco's thread (don't use in now and don't want to trust my memory) search it for emmc_cap
mrcarlxx said:
I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
Click to expand...
Click to collapse
safest way is to flash from GB. Its easier to brick your phone when flashing from ics which is what i did. Its better being safe than sorry
mrcarlxx said:
I'm being a right pain in the bum now ain't I!
Been searching the forum and it seems I have to go back to GB to install another rom?
I thought it was the stock kernel that it was unsafe to flash from, so I installed Franco kernel thinking it would be okay then...but apparently not?
So is there a rom out there that I can flash nice and safely with ics on Franco?
Click to expand...
Click to collapse
Quite a few custom Roms require you to install from gb, not because of the kernel issues, but for other reasons which I'm not too clear on. For instance if you flash paranoid over Ics rom with safe kernel, chances are you'll brick. Always follow the rom threads directions, never try shortcuts and 99% of the time you won't have any issues at all.
Sent from my GT-N7000 using xda premium
Alright, but don't you have to flash GB using PC Odin, or can I use mobile Odin? Or can I use cwm?
It's recommended to use PC odin although I think it's okay from mobile odin also. I wouldn't use cwm as that utilises the existing kernel.
Sent from my GT-N7000 using xda premium
Alright I will look into using PC Odin.... This should be fun lol
You do not really have to flash the full rom. Just flash via mobile odin the abyssnote 39 or 42, reboot to that kernel and flash your custom rom via cwm.
I have flashed stock gb and/or ics back and forth from within mobile odin without issues.
Sent from my GT-N7000 using xda app-developers app
IsmailZU said:
safest way is to flash from GB. Its easier to brick your phone when flashing from ics which is what i did. Its better being safe than sorry
Click to expand...
Click to collapse
+1 (till the eMMc and other bricking issues are sorted out.
praetorius said:
You do not really have to flash the full rom. Just flash via mobile odin the abyssnote 39 or 42, reboot to that kernel and flash your custom rom via cwm.
I have flashed stock gb and/or ics back and forth from within mobile odin without issues.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Where did you get the GB rom from? Was it from the stock rom thread on here? And where did you get the kernel, I think I may have seen it on download Android rom .com...
I have my ics backed up on my sd card, so if I want to go back to ics can I just use the backup instead of finding the ics rom?
dsmas said:
+1 (till the eMMc and other bricking issues are sorted out.
Click to expand...
Click to collapse
Do you think they will ever be sorted out? The phone has been out a while now lol
Haha just had the freight of a life time, just flashed abnote through mobile Odin and the phone got jammed at the Samsung boot screen...lucky this time I have cwm fully installed and went right back to Franco...
LOL
Never used PC odin for flashing any roms, only used Abyss kernel 4.2 flash into recovery of abyss and flash any rom and enjoy i have been jumping from rom to rom through abyss kernel No issues till date all well and good, never flashed anything from any ICS kernels or even CM9 kernels, only abyss kernel to be ultra safe.
bhasg1007 said:
Never used PC odin for flashing any roms, only used Abyss kernel 4.2 flash into recovery of abyss and flash any rom and enjoy i have been jumping from rom to rom through abyss kernel No issues till date all well and good, never flashed anything from any ICS kernels or even CM9 kernels, only abyss kernel to be ultra safe.
Click to expand...
Click to collapse
It won't let me install abyss kernel for some reason...both files through Odin and through cwm but it just gets stuck on the boot screen so keep having to go back to Franco....bummer :-(
SpyderTracks said:
It's recommended to use PC odin although I think it's okay from mobile odin also. I wouldn't use cwm as that utilises the existing kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Why not make a backup in recovery when on stock GB?This way you can restore easily no odin what so ever needed!
It is safe to restore even on ICS (or at least stock ics) right?
Can restore cause brick?(this has always been a puzzle to me)
galaxynotes said:
Why not make a backup in recovery when on stock GB?This way you can restore easily no odin what so ever needed!
It is safe to restore even on ICS (or at least stock ics) right?
Can restore cause brick?(this has always been a puzzle to me)
Click to expand...
Click to collapse
Apparently it can even if your not rooted or touched your phone in any way...
mrcarlxx said:
Haha just had the freight of a life time, just flashed abnote through mobile Odin and the phone got jammed at the Samsung boot screen...lucky this time I have cwm fully installed and went right back to Franco...
LOL
Click to expand...
Click to collapse
Thats bcoz abyss is gb kernel its normal you cannot boot ics.
Use abyss to flash OTHER roms from cwm.
Sent from my GT-N7000 using xda app-developers app
Related
I know this is a very stupid question but I just want to make sure flashing with CWM is viable.
For the leaked stock ics 4.0 rom I know I should use odin to flash, but how about custom 4.0 rom like Romow? Should I use CWM to flash the zip file?
Thx~
ps: I am currently running rocketrom v19 with CWM
use CWM n flash zip
Sent from my GT-N7000 using xda premium
You should read in the post how must it be done, you should start in annual kernel 3.9 then install chainfire.repack and so on
Sent from my GT-N7000 using xda premium
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Also, some ppl claimed that I need to first flash the stock leaked 4.0 rom then have my phone rooted with CWM installed and finally flash custom 4.0 rom with CWM. Is that really necessary?
Sent from my GT-N7000 using XDA App
kelvin fong said:
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
There are better roms now than ROMOW's one i think, try flashing Rocket Rom, or the new AOSP
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
kelvin fong said:
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
Click to expand...
Click to collapse
Yes youre right, there is a problem with root a cwm in ics, and you need to da that
Follow carefully the instructiones if not you wont hace fullroot
PROBLEMS!
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
brooon said:
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
Click to expand...
Click to collapse
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
kelvin fong said:
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
Click to expand...
Click to collapse
Yes, I came directly from GB!
If you can load the boot animation that means ur phone is not bricked. You should try to download a stock gingerbread rom from dr ketan's post and flash it by odin pc.
Sent from my GT-N7000 using XDA App
When going back to GB, i kinda 'restart' the whole process by going back to Stock ROM via Odin, and redo the root and CWM.
Else, there are strange quirky issue ex. CWM just hangs while wiping the phone.
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
dr.ketan said:
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
brooon said:
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
Click to expand...
Click to collapse
Should be this one(http://forum.xda-developers.com/showthread.php?t=1424997).
Firstly, download one of the roms from [Older ROMs (Directly Rootable)].
Secondly, follow the [Installation Guide For Older ROM ], the one using odin pc.
You may see below another flashing method using mobile odin, but that doesn't suit you since that one requires your phone rooted before and will keep your root after flashing. The one with odin pc will wipe out all your data and apps(of course not your SD card) and also unroot your phone. That means your CWM and root will all be gone and you have to follow another post to root it again(now this one:http://forum.xda-developers.com/showthread.php?t=1329360)
this one(http://forum.xda-developers.com/showthread.php?t=1424997)teaches you how to flash a rootable gingerbread rom, but not rooted. This one(http://forum.xda-developers.com/showthread.php?t=1329360)shows you how to root your phone and install CWM. I think these two posts are the best tutorials you are looking for.
I think you should download this >>http://forum.xda-developers.com/attachment.php?attachmentid=907734&d=1329574136
This one is better organized.
Thanks mate! Saved it to my desktop...but finally i was able to manage the problem by simply flashing a *fresh* RocketRom again (?!). I thought it would be worth a try...
Anyway: Thank you very much for your support, it´s good to still meet that friendly kind of people with patience here on the board (it´s getting less these days) hope i´ll be able to return the favor in future
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
kelvin fong said:
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
Click to expand...
Click to collapse
As far as I remember I made my very first steps with odin after I reveived my note (root, cwm)...rocket has been flashed by using cwm. But yes, my binary counter increased definitely...
...I do have a USB Jig, but in some was I am kind of afraid of going trough this! To fumble around in pure darkness...hmmm i don´t know
Have you tried it yourself?
Actually I've got a yellow triangle together with increased binary counter as I followed another tutorial guide(I should follow dr ketan's guide before).
I think removing the counter with a jig is way too dangerous for me so I don't want to risk it. Simply remove the counter only when you really need to bring your phone to samsung because maybe you don't even have to claim the warranty at all.
Hi..I currently running Kingdroid 1.6 on my note and i want to revert back to my old GB roms (lightning rom).However,im afraid of bricking my note.I already search through the forum but still can't find a method that is guarantee to works.Some say to flash stock GB first through PC odin.Some say i just need to flash abyss kernel then the lightning rom.so which methods is safe?
Im a newbie anyway.Thanks
I would flash stock gb with pc odin and start fresh i have done this many times this does not gurantee no probelms but in my personal opinion thats the safest way i flash straight back to prerooted gb rom.
Sent from my GT-N7000 using xda premium
Hafz553 said:
Hi..I currently running Kingdroid 1.6 on my note and i want to revert back to my old GB roms (lightning rom).However,im afraid of bricking my note.I already search through the forum but still can't find a method that is guarantee to works.Some say to flash stock GB first through PC odin.Some say i just need to flash abyss kernel then the lightning rom.so which methods is safe?
Im a newbie anyway.Thanks
Click to expand...
Click to collapse
PC Odin method is safer than Abyss. Do it like this: http://forum.xda-developers.com/showpost.php?p=25285584&postcount=3
If you get a bootloop after the flash, do this: http://forum.xda-developers.com/showpost.php?p=26460335&postcount=4
Sonic1981 said:
I would flash stock gb with pc odin and start fresh i have done this many times this does not gurantee no probelms but in my personal opinion thats the safest way i flash straight back to prerooted gb rom.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer....will try it out..have you tried it before?
chasmodo said:
PC Odin method is safer than Abyss. Do it like this: http://forum.xda-developers.com/showpost.php?p=25285584&postcount=3
If you get a bootloop after the flash, do this: http://forum.xda-developers.com/showpost.php?p=26460335&postcount=4
Click to expand...
Click to collapse
Really thanks for the answer!
Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.
Hey
I have afew questions. Im goin to root today but just need some advice. Im on ics 4.0.4.
Can i flash any rom i want?
each time u flash a rom do u need to flash the correct kernal with that rom or just pick a good kernal?
I want to flash that rocket rom v10 but it looks like it downloads with just a rom, is that normal or do i look for a kernal.
Cheers
Sent from my GT-N7000 using XDA
islandmixed said:
Hey
I have afew questions. Im goin to root today but just need some advice. Im on ics 4.0.4.
Can i flash any rom i want?
each time u flash a rom do u need to flash the correct kernal with that rom or just pick a good kernal?
I want to flash that rocket rom v10 but it looks like it downloads with just a rom, is that normal or do i look for a kernal.
Cheers
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
This is a custom Kernel which includes root and cwm recovery, ROMs includes their own kernels, so you do not have to flash kernel every time unless you need some kernel of your choice.
The method which you want to follow is the safest method to root but it will raise binary count and yellow triangle, which can be removed using triangle away app by chainfire.
---------- Post added at 09:46 PM ---------- Previous post was at 09:32 PM ----------
Yes you can flash any rom after rooting and flashing cwm recovery but make sure you flash some safe kernel before performing full wipe in recovery, I recommend using Abyss GB kernel for that. You do not have to download any kernel for Rocket ROM, it has its own kernel but make sure to flash Abyss kernel in recovery and then reboot to recovery and perform full wipe before installign Rocket ROM.
Speedmod kernel is good and will work on all TW ICS roms.
Follow the instructions given in Dr ketan's thread in Android developement
This method seems the quickest and its done by cursed4eva on youtube. You dont loose no data or apps. It only works for ics 4.0.
You flash cwm and then superSU and your rooted. Lastly you flash speedmod kernal by mobile odin and thats it.
This method takes afew mins and does not mess up anything. Video tutorial is great but from your replies, when i go onto flashing roms etc i just flash them in recovery as normal right??
Sent from my GT-N7000 using XDA
islandmixed said:
This method seems the quickest and its done by cursed4eva on youtube. You dont loose no data or apps. It only works for ics 4.0.
You flash cwm and then superSU and your rooted. Lastly you flash speedmod kernal by mobile odin and thats it.
This method takes afew mins and does not mess up anything. Video tutorial is great but from your replies, when i go onto flashing roms etc i just flash them in recovery as normal right??
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Do not use this touch recovery method, this has been reported unsafe, you will end up with a brick in your hand. It is better you use custom kernel to root and flash cwm recovery. Flashing custom kernel does not wipe your data.
Could you please give me the instructions in steps...cause his video has no bad comments, everyone said it has worked fine without loosing no data or anything. But if its unsafe im sooooo confused lol
Sent from my GT-N7000 using XDA
Find it from second link on my signature.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find it from second link on my signature.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Okay im going to follow it lol...can i do all the flashing with mobile odin pro? Not the pc one.
Sent from my GT-N7000 using XDA
It needs root
So first step uneed will be pc odin
Sent from my GT-N7000 using xda premium
Lol forgot...cheers. Damn im glad i was told b4 i did the method above.
Sent from my GT-N7000 using XDA
Glad your phone is saved
Sent from my GT-N7000
Thanx for all the help...was very nice of you lol im rooted now and it was smooth. I do still have questions so please bare with me as im still learning.
Ive already backed up my efs as DR suggested so thanx.
1. Whats best app to back everything up with?
2. So before i find a rom i want i need to download another kernal before any wipes etc are done??
3. whats best method to flash the kernals and roms? Mobile odin?
4. Triangle away i have not yet done this but is it a must that i get this off my decive or does it not matter?
5. Whats the best rom to use for ics 4.0.4 and are their any htc sense looking roms.
Sorry lol i just need to be sure. Pleaseeee say everything without the shortcut words, very confusing.
Thanxxx
Lol, happy to help you my friend. Will reply to your questions asap.
Sent from my GT-N7000
---------- Post added at 08:28 AM ---------- Previous post was at 08:18 AM ----------
Okay, lets start, i used few short word as was using note to write,
Best app to backup apps is titanium backup but dont think it can restore odexed apps (apps on stock rom) so i prefer root explorer to remove apps from system and save them on sd card.
All newest custom kernels are known to be safe but better you go through kernel threads to be sure, since you are rooted now so can use mobile odin to flash kernel.
Best way to flash custom roms is cwm recovery.
And there is no best custom rom, as all are best, it depends on your choice.
Yellow triangle doesnt affect anythin except claiming warranty.
Hope this helps
Sent from my GT-N7000
That has cleared up so much for me....lol thanx
Can u flash stock roms thoe also?
As for the backups of all data, cant a nanroid backup be done? Titanium says it backs up everything but then their is a appp called mybackup which is for root and says it does the same thing. Damn maybe your way might work but 2morrow i will flash a new rom for sure so all help is welcomed....thank you kindly.
Yes you can flash custom roms but just make sure you are on one of the latest safe ics custom kernel (go through kernel threads), you can download your stock firmware as backup and backup downloaded apps using titanium backup, thats it.
Sent from my GT-N7000
What do i use to back up my stock firmware? Is that the nandroid back up in recovery
Yeh for the apps i might just use titanuim or my back up. Both of em seem to work for that purpose.
Mobile odin seems like a great app but it seems ppl just flash kernals with it but that can be done in recovery right.
Yes you can flash kernel through recovery but custom only, for stock you have to use odin/mobile odin.
Yes you can do nandroid backup but it was not recommended so far as it was not safe on ics kernels but now some custom kernels/cwm recovery are safe for it. But I personally dont use it, i have my stock firmwares on my pc as backup, best for me.
Sent from my GT-N7000
jeetu1981 said:
Yes you can flash kernel through recovery but custom only, for stock you have to use odin/mobile odin.
Yes you can do nandroid backup but it was not recommended so far as it was not safe on ics kernels but now some custom kernels/cwm recovery are safe for it. But I personally dont use it, i have my stock firmwares on my pc as backup, best for me.
Sent from my GT-N7000
Click to expand...
Click to collapse
Okay well since my phone is just rooted and nothing has been flashed. what should i do first to back up everything? what do you recommend as i would like to keep the back on my pc & exernal hard drive just to be safe i have it all intact.
Just backuo with titanium
All user app + syst data
But when restore, just use
Restore all user app+data
(And data of msg n call log in yellow color. If you get it back then only
Contact n calendar will get back by gmail sync.)
Sent from my GT-N7000 using xda premium
islandmixed said:
Okay well since my phone is just rooted and nothing has been flashed. what should i do first to back up everything? what do you recommend as i would like to keep the back on my pc & exernal hard drive just to be safe i have it all intact.
Click to expand...
Click to collapse
Downloading stock gingerbread for your region as backup is best in my opinion, you can always flash it through odin when required and can update via kies or OTA, You can download latest ICS as well and keep it on your PC, your wish. not sure about nandroid backup, never used on Note.
Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Hi @ASMI1,
Thanks for such a fast reply.. I've been to the main website where I can download it.. One thing I'm worried about, I've seen in this ROM and mentioned in another GB based ROM for our phones is: CSC?
the CheckRom v6 features "Multi CSC" what does this mean, and is it dangerous?
Do I flash Philz Kernel, and install with that? Do I need to flash another kernel afterwards? Does this room raise the counter or anything?
I'm OK flashing JB or KK, but not done a GB ROM and worried in case summit not aware of, don't want to brick this...?
Thanks, Lister
ASMI1 said:
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
CSC means customer service code. Multi csc means that this rom is not locked to any country or carrier.
Yes you can flag it under philz kernel.
Sent from my LG-E410
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Lister Of Smeg said:
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Click to expand...
Click to collapse
Reboot into recovery again if you found the touch colored recovery then you're on philz kernel. If not be sure that you selected the suitable philz kernel.
If I helped hit the thanks button.
Hi @kaborayyan,
Yep, I'm certainly on Philz Kernel.... when it's loaded, its kind of a pink/purple-ish colour.... (not sure what version, but something like 5.1.1.1) It's the first one I downloaded when I got this phone a couple of months back, that I used to root/and then flash custom roms with... (namely, JB).
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Its a UK Vodafone, N7000
Thanks, Lister
Did you try to flash a stock GB ROM through Odin? May be you get better results. Then root it and flash whatever you want of custom GB based Roms.
Sent from my GT-N7000
yeah like kaborayyan said, try to flash any stock GB rom using odin3 v1.85 only (you can find instructions and download links in the sticky thread in the orginal development section, you should look for mirrors because hotfile is down or just download chainfire prerooted stock rom)
After you get a stock rooted GB rom installed on your phone, install checkrom using the recovery after wiping data, cache and dalvik.
as i said stock ICS roms are unsafe, other roms are safe... just keep a backup of your efs
and be careful when using odin3.
btw, hitting the "thanks" button is easier than writing it
cheers
Sent from my GT-N7000 using xda premium
Lister Of Smeg said:
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Click to expand...
Click to collapse
Go to www.samsung-updates.com firmware section. There are a few 2.3.6 roms available. Stock though. These roms might be non root able. Not really sure as there are not many methods of rooting GB (check Dr ketans thread for more info) . It could also be possible that for rooting again you will need to flash an ICS or JB rom again using Odin.
If you just want to taste the ginger then stock GB rom is quite fast.
Lister Of Smeg said:
Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
Click to expand...
Click to collapse
Pristine LC1 is a good option. Its in the OP of the pristine thread. All GB kernels are safe, as above mentioned.
There is no 2.3.7 or CM based N7000 rom
Sent from Nexus 5 on Slimkat
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Lister Of Smeg said:
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Click to expand...
Click to collapse
1) not really unless you use a new version of philz touch recovery, which wouldn't happen because on the n7000 the recovery sits on the kernel, thus you are stuck with an old kernel and old recovery. As such your best bet is to do a nandroid backup. Further - when you restore such a backup, I recommend flashing abyss again first so you are in the Ame recovery it was made in
2) yes. Just be concerned of Stock ICS (4.0.4) with a custom recovery. Never flash temporary cwm.zip. matter of fact, just avoid stock ICS at all costs. Newer versions of cm9 are safe. Avoid very old cm9 versions. My personal recommendation to you would be Paranoid Android cm9 ( I think it stopped at around .4a) that one was amazing.
Sent from Nexus 5 on Slimkat