Hello, I'm using SSGN (N7000B) and I have flashed rom for N7000. Now my SSGN Model is N7000. How can i go back to rom for N7000B
Thx.
Or I need to do is wait rom for N7000B
If I use USB Jig it will be come back to N7000B ?
Hey... i think the N7000B is the model of AT&T... currently i have not found any information on any differences in hardware etc. So i would assume it's the same then the N7000 model... given this information you could flash any stock/custom ROM to the Galaxy Note N7000 if you don't mind that the model type is not displayed as N7000B.
Hope this helps.
Related
[Q]
It is good to know that samsung has finally released gb in more than one place for Galaxy tab P1000 india
the firmware version is P1000ODDJPA and i wanted to know where can i download it from
also thell me what pda csc and phone version mean
andwhat HIDSWVER means
Can this be installed on a T-Mobile US version of Tab?
Thank you
Hi xda-developers,
I have a Samsung Galaxy Tab (P1000) (hw ver. rev1.2), provided by Vodafone Portugal, and I want exploit the device by installing custom ROMs.
But as you can imagine, I want to be sure that I can revert the device to this state whenever I want. And this is my problem....
I've been searched for tutorials how to do this, but i could not find this specific ROM.
Info after pressing *#1234# :
Firmware Version:
PDA - P1000BUJQ3
PHONE - P1000BUJQ1
CSC - P1000TCLJQ1
Android version is 2.3.6 and carrier is Vodafone Portugal
I also went to a Vodafone forum, and they suggested an alternative by asking a previous version ROM to Samsung (unlikelly): Android 2.2, P1000BUJI4+P1000TCLJI1
I also can't get this one.
Questions:
Do you have any sugesttions where can I get this stock ROM (preference 2.3.6)?
What does people like me normally do in this sittuations on their devices?
Is there any Stock Rom without carrier (directly from Samsung)? Can I install another P1000 stock rom from another carrier (I don't like this sollution) ?
Let me just say this.
You P1000 is no different than all the P1000 talked about here.
Just read all some if the threads here and you know what to do.
Sent from my GT-P1000 using xda app-developers app
Please try this one
http://forum.xda-developers.com/showthread.php?t=1704563
priyana said:
Let me just say this.
You P1000 is no different than all the P1000 talked about here.
Just read all some if the threads here and you know what to do.
Click to expand...
Click to collapse
Thanks priyana, but I want to preserve the original ROM for a eventual revert, and that's what I can't find in any P1000 thread.
nurusz said:
Please try this one
http://forum.xda-developers.com/showthread.php?t=1704563
Click to expand...
Click to collapse
Thanks nurusz, but I don't want how to flash the P1000;
What I want is the stock ROM for P1000, carrier Vodafone Portugal (TCL), no matter what version (2.2 or 2.3) and not-rooted
I have 2.3 now in my P1000 (that was never flashed before (only updated via Kies)).
Does anyone provide me any reliable solution to this?
Thank you!
Hi all ,
I have SC-01C docom japanese tab with unknown baseband and imei null.
Please tell me can we fix it with writing firmware of P1000 or some Jtag solution?
Thanks and regards,
I confirm that it can be convert to P1000 1000% as I convert it successfully
hi
can u explan more plz ,i have the same problem
then can we convert M180S (korean version) to P1000
Converting you mean flashing a P1000 firmware?
Up on this one would really help a lot,
Is converting just flashing P1000 firmware?
ronnieryan said:
Up on this one would really help a lot,
Is converting just flashing P1000 firmware?
Click to expand...
Click to collapse
Yes, because the SC-01C DoCoMo model is simply a rebranded P1000.
It can't be done straight away though. You will likely run into problems if you're running Froyo and try flashing a non-Japanese stock ROM, like I did just last week which resulted in a soft brick.
First upgrade to the stock Japanese Gingerbread ROM, then flash the Overcome kernel, followed by the Overcome ROM. From there you can likely be able to flash any P1000 ROM you want. I can't confirm this for all ROMs though, as I've only flashed CyanogenMod 9 on my SC-01C.
HOW CAN I GET FRENCH LANGUAGE ON MY NTT DoCoMo SC-01C ????
my docomo tab is update to 2.3.6 GINGERBREAD and now im wondering to get french language inside, ANY HELP
geno93n0 said:
Yes, because the SC-01C DoCoMo model is simply a rebranded P1000.
It can't be done straight away though. You will likely run into problems if you're running Froyo and try flashing a non-Japanese stock ROM, like I did just last week which resulted in a soft brick.
First upgrade to the stock Japanese Gingerbread ROM, then flash the Overcome kernel, followed by the Overcome ROM. From there you can likely be able to flash any P1000 ROM you want. I can't confirm this for all ROMs though, as I've only flashed CyanogenMod 9 on my SC-01C.
Click to expand...
Click to collapse
I have Sc-01c running sim locked Japanese Gingerbread ROM.
Can i flashed with stock rom of p1000????
Hi there everyone so i was wondering can i flash other firmware to my galaxy note N7000B ? Or will i end up with a bricked device? The unit appears to be identical to my mates N7000 except that mine is the N7000B which operates on the telstra next g network his will also operate on the telstra next g network i would appreicate any support you may have thanks for your time,
extremeit79 said:
Hi there everyone so i was wondering can i flash other firmware to my galaxy note N7000B ? Or will i end up with a bricked device? The unit appears to be identical to my mates N7000 except that mine is the N7000B which operates on the telstra next g network his will also operate on the telstra next g network i would appreicate any support you may have thanks for your time,
Click to expand...
Click to collapse
No. You cannot put a different phone's firmware on the N7000B.
I have a French note (n7000) from Kogan that is rooted and running a n7000 rom with a n7000b baseband because I wanted the Telstra modem. It's working fine.
Sent from my note as always
Galaxy Note N7000: Sweet ROM v5 4.0.4 XXLRU + HydraCore v5.34 std + BDVLR2 baseband
Hi there!
I have an unlocked un-rooted N7000B 4.1.2.
I want to use N7000 firmware on it.
Is it safe for the phone?
Best regards, 1nS4n3.
Use the search function in the correct forum (Q&A), write "N7000B", hit search and you will get the answer.
1nS4n3 said:
Hi there!
I have an unlocked un-rooted N7000B 4.1.2.
I want to use N7000 firmware on it.
Is it safe for the phone?
Best regards, 1nS4n3.
Click to expand...
Click to collapse
Yes you can use N7000 firmware on N7000B no problems
1nS4n3 said:
Hi there!
I have an unlocked un-rooted N7000B 4.1.2.
I want to use N7000 firmware on it.
Is it safe for the phone?
Best regards, 1nS4n3.
Click to expand...
Click to collapse
im same have n7000b too
if you use same provider no problem
but i use VengeanceNote TW 3.1 - Miui and it unlocked provider
some roms 4.1 have problem with locked provider
I've got a N7000B and have been using normal N7000 roms on it without any problem.