Ok here. i first instaled new costum rom, second i tryed to change theme with broodromconfihurator. after that bootloop apeard,then i try flash it with odin and it worked but when android instaled there were a lot of errors and i was not able to work with phone so i reflash it but same so pull of the battery and aftzer that phone want turn on.so any help here or he is dead.....
vatralaus said:
Ok here. i first instaled new costum rom, second i tryed to change theme with broodromconfihurator. after that bootloop apeard,then i try flash it with odin and it worked but when android instaled there were a lot of errors and i was not able to work with phone so i reflash it but same so pull of the battery and aftzer that phone want turn on.so any help here or he is dead.....
Click to expand...
Click to collapse
dafuq did i just read
i don't get it. could you please explain a bit more?
like which rom did you flash, errors detail, etc.
get into recovery if you can and do a wipe data - factory reset, maybe could that help you, if doesn`t, pull up battery, get it into download mode again (volum down & home button & power button) then try reflash another rom
ah sry.. ok i managed to turn it on after an hour and half.....
i used simplisity plus this new rom,,and with broodromconf tried install new theme. and after resetart phone enterd bootloop,so i tryed reflash it wih odin KQ1 stock rom. but after stock rom was installed there wehere a lot of application error like "sorry! google.android.sms stoped working or google.upload stoped working" and coud not press any key or anything so i remove battery and after that, phone did not want to turn on,,,,ok i now i can turn it but i am getting this errors so what to do.
You should do exactly as chasemyass said. that should fix your problem.
maybe some content of broodrom configurator doesn't fit with Simplistic Plus. Just be more careful.
btw, clear dalvik cache first if you going to flash new rom.
requires dedoex and zipal...think simplistic plus have that...put that a side. i turn it on . flash feamod recovery and did factory reset and looks like it works now.. thx guys...
I can never fully guarantee that broodROM Configurator is compatible with all ROMS. Since it's actually made for broodROM it includes a method of installing the files as it would work on broodROM. Cranium & Stock ROM works tho.
and just format all partitions then reflash with odin and you will be fine
Rule #1 on using the configurator: ALWAYS MAKE A CWM BACKUP!
Related
Hello guys !
The problem that I have is that my phone keeps restarting after trying to update to 2.3.5.
The update appeared to be ok but before finishing you just have to select the language and so on.
Well, mine did not managed to reach that... It just keeps restarting and restarting and none of the buttons combinations does work for putting to download mode or reset mode.
I also uploaded a link for the movie, because it has 100mb and could not be uploaded here.
Any ideea guys?
Pull out battery, after a few minutes put it back and try to enter Download mode with 3-button combo (VolDown-Home-Power). Tell me if it works.
THANKS ! It worked, now it is in download mode. What do you suggest me to do? which restore or update is better and bugless?
Thank you again!
Now flash stock JVT with odin, restart, turn off, reboot in Download mode again, and flash a kernel to get CWM. After this, flash the custom rom that you prefer (or stay in stock).
I have made the steps like there, and when I reached the end It did not restart, and this time it is not starting at all and also not answering to any command.
No one can help? The phone also can not enter download mode !
Any one can see me or help me?
buddy do not play wid alll this thing....u perform all tbis by showing some guide.... there are lots of guide avail on xda for flash through odin so u have to follow
Sent from my GT-I9000 using XDA App
Used new JVU
grigorean_alexandru said:
Hello guys !
The problem that I have is that my phone keeps restarting after trying to update to 2.3.5.
The update appeared to be ok but before finishing you just have to select the language and so on.
Well, mine did not managed to reach that... It just keeps restarting and restarting and none of the buttons combinations does work for putting to download mode or reset mode.
I also uploaded a link for the movie, because it has 100mb and could not be uploaded here.
Any ideea guys?
Click to expand...
Click to collapse
Follow the video guide for flashing stock rom
http://www.hdtechvideo.com/?p=54
I could not make it work ! Not even using JIG ! homemade, but a good one - i checkd it.
So, it's back to warranty, hoping they will return it good or another one new.
It was practically dead !
cabessius said:
Now flash stock JVT with odin, restart, turn off, reboot in Download mode again, and flash a kernel to get CWM. After this, flash the custom rom that you prefer (or stay in stock).
Click to expand...
Click to collapse
Thank you! I had been trying to fix this problem all day and nothing worked until I tried this rom!
Hello again guys!
The phone returned from warranty, after 1month and 2 weeks.
It is not working as new, it has a little lag.
I installed Navigon and asphalt and the phone restarted, and entered the restart loop.
I made an update to I9003XXKP9 and i followed all steps but keeps restarting, i updated then to I9003XXKPE but with same problem, and at the end it can not make the hard reset, it turns some errors with red:
"E faild to mount data, no such file or directory."
"E:format_volume: rfs format faild on /dev/block/mmcblk0p3"
"Data wipe failed"
Any ideea?
Problem solved, 2nd time, by replacing mainboard. Thank you all for replying!
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Try 3 button or get a jig to get in download mode and then flash anyother rom
Sent from my GT-I9000 using XDA App
it dosent want to go into recovery or download mode... thats the problem!
it just freezes when i try the three buttons or via darky configurator
Have you tried with adb?
germaligni said:
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Click to expand...
Click to collapse
Download and install DarkyOTA App or DarkyROMTool
Select wipe and install Darkys 10.2.2 using any of this Darky app.
Once you finish installation lets see what will happen..
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
germaligni said:
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
Click to expand...
Click to collapse
try using ADB and force with that to get download mode, or just make usb jig...
for optional option firstly change your included kernel on that rom ...
What is ADB?
I can get into Download mode, but i can go to recovery mode... i Instaled new roms from recovery, what can i do from download mode?
Thnx alot, im so newb and my phone is killing me
Had the same problem !
I flashed back to a stock GS rom, like 2.3.x and, root it, fixed permissions en whipe all date, everything thats whip-a-ble i whiped in recovery mode.
Then flash back Darky, that worked for me.
Hi there folks!
I'm a bit stressed at the moment. And that's because:
Yesterday i flashed ics leak for the chinese version of the note. Everything works like a charm! Well, somehow today the keyboard didn't appear on the screen when i wanted to write something and I decided to wipe my phone. Did a full wipe. And the trouble began.
Didn't reboot.
Tried to flash rocket rom 20 via cwm instead, which still works (cwm) but it got stuck at the wipe status. I can't wipe system with cwm. Also i can't load my battery which makes me even more nervous. Tried mobile odin but maybe I'm too stupid or it simply doesn't work because it says something like "can't find device"...
Tried to flash red cwm or chainfires.... didn't work
So if there is someone who can help me... PLEASE!!!!!!
go in download mode ( home button+volume down+power on) and then connect to odin, after you connected to odin, flash any firmware you want
It worked! I love you! Want to make babies with you ;-)
Just kidding
THANXXXX !!!! DD
Hello everybody
before i was using galaxy nexus .. so i have previous experience
yesterday i just rooted my note and everything working well
i was going to install CM10 but i read that i have to downgrade to GB so i followed a video
first problem: after downgrading and installing the rom as the video maker made .. i tried to boot the rom but it stucks at rocket bootloader for more that 20 minutes (i know for the first time it may takes long time to boot but not 20 minutes) i had a nap in this 20 minutes
second problem: i said that if it's not working i am going to install the stock kernal and run the CWM and install stock rom .. i just installed the kernal and rebooted then i was showing the text { galaxy note GT-N 7000 etc....) it was rebooting in the same screen of text .. i tried to get the recovery mode but i can't {volume up + Power button + Home button) but i can enter downloading mode (Volume down + Power button + Home button)
i need solution for the second problem and explain for my why the first problem was like that
my heart falls down in my stomach
Firstly,you can directly flash jb rom directly from ics..Its not necessary to downgrade to gb
And after downgrading to gb,you should have tried doing a factory reset
Now,again try flashing stock gb rom and if the process gets failed,then what is the error you get??
soln
amansoori said:
Hello everybody
before i was using galaxy nexus .. so i have previous experience
yesterday i just rooted my note and everything working well
i was going to install CM10 but i read that i have to downgrade to GB so i followed a video
first problem: after downgrading and installing the rom as the video maker made .. i tried to boot the rom but it stucks at rocket bootloader for more that 20 minutes (i know for the first time it may takes long time to boot but not 20 minutes) i had a nap in this 20 minutes
second problem: i said that if it's not working i am going to install the stock kernal and run the CWM and install stock rom .. i just installed the kernal and rebooted then i was showing the text { galaxy note GT-N 7000 etc....) it was rebooting in the same screen of text .. i tried to get the recovery mode but i can't {volume up + Power button + Home button) but i can enter downloading mode (Volume down + Power button + Home button)
i need solution for the second problem and explain for my why the first problem was like that
my heart falls down in my stomach
Click to expand...
Click to collapse
Firstly may be u would ve forgot to do a clean wipe of cache n data.
Its a must while moving to CM roms.
N before this do a nandroid back up n then back up data n then try doing a wipe n install it should work damn fine.
Thank you for replying
i am trying now to install the stock 4.0.4 rom from hiemdall but i am facing problem interface failed
i think i didn't made the usb debugging
please provide me any way to flash the rom .. i have macbook pro
amansoori said:
Thank you for replying
i am trying now to install the stock 4.0.4 rom from hiemdall but i am facing problem interface failed
i think i didn't made the usb debugging
please provide me any way to flash the rom .. i have macbook pro
Click to expand...
Click to collapse
Try reinstalling hiemdall and better flash a gb rom
rajsekhar.300 said:
Try reinstalling hiemdall and better flash a gb rom
Click to expand...
Click to collapse
Follow this thread to get the file you want. If you have access to windows PC, install ODIN and follow the below thread for complete restoration to Stock rom using ODIN.
Remember to connect the phone in Download mode.
http://forum.xda-developers.com/showthread.php?t=1424997
Follow this thread to use Hiemdall
http://forum.xda-developers.com/showthread.php?t=878686
Done =)
Thank you all who replied and tried to help me
i just booted the windows 7 on my mac to download odin and flashed stock ICS and everything working fine
I directly installed cm10 from stock ics just 10 hours back. Its soft brick u need to flash the stock rom via odin. If cwm recovery is not coming. And then have to repeat the process.
Sent from my GT-N7000 using xda app-developers app
amansoori said:
Thank you all who replied and tried to help me
i just booted the windows 7 on my mac to download odin and flashed stock ICS and everything working fine
Click to expand...
Click to collapse
Good to hear:highfive:
Hello friends.
Now I am with 2.2 cyanogen mod. I wanted to install FroyoBread.v23b so I put this folder into sd card and with oldest one xrecovery I tried to install it but it showed some error. So I decided to install other xrecovery "Bin4ry & Androxyde" OS Version 6.1. but after that I even cannot open xrecovery and when the phone loads up it starts to force closing everything so I cannot do anything.
Any ideas what to do? Please I really need a phone :/
...
Use PC Companion to restore the state of the factory and redo everything from scratch.
Use x8toolbox & get CWM & flash froyobread
:flipoff2: DEVILS NEVER CRY:flipoff2:
BenasJ said:
Hello friends.
Now I am with 2.2 cyanogen mod. I wanted to install FroyoBread.v23b so I put this folder into sd card and with oldest one xrecovery I tried to install it but it showed some error. So I decided to install other xrecovery "Bin4ry & Androxyde" OS Version 6.1. but after that I even cannot open xrecovery and when the phone loads up it starts to force closing everything so I cannot do anything.
Any ideas what to do? Please I really need a phone :/
Click to expand...
Click to collapse
use PC Campanion (the best way) to repair your phone its super clean and clutter free!
original latest 2.1.1 by Sony officially
or
Use flash tool (The fast Way) to repair your phone really quick and need to search
for the firmware of the original 2.1.1 and flash it by using flash tool
you can find the firmware in Gogeta's Signature,download it.
if u want to roll back your phone into 2.1 download this ftf file
or x8toolbox
and do clean flashing on kernel and ROM
dont forget to factory reset, wipe dalvik cache, and wipe batery stats
if u want install cwm use search button..n u will find topic about installing CWM
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
BenasJ said:
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
Click to expand...
Click to collapse
Installing CWM by x8toolbox doesn't need flashmode
:flipoff2: DEVILS NEVER CRY:flipoff2:
BenasJ said:
In both situations I get stuck in the same situation when I need to unplug the device, turn it off and while holding back button plug the usb cable again. Then nothing happens, phone starts as usual and starts showing many "force close" errors
Click to expand...
Click to collapse
That happened with me too on froyobread..
The only option was to repair it with flashtools
sent from my phone using hands and brain...
Hi,
first of all, follow this tut to go back to clean 2.1 eclair.
Now you know what to do, root,xrecovery etc...
Reboot to xrecovery and FULL WIPE before installing the rom.
No more forse closing :good:
If it didn't work, try to full wipe after the installation(on xrecovery).
Be pleased. I get my phone recovered. Thanks a lot!!! It's now again 2.1. So now I know how to recover it, but just say your opinion - Basically what I need is not so stupid x8 blue color and function which allows to move apps to sd card. Is it worth to write some higher ROM again?
BenasJ said:
Be pleased. I get my phone recovered. Thanks a lot!!! It's now again 2.1. So now I know how to recover it, but just say your opinion - Basically what I need is not so stupid x8 blue color and function which allows to move apps to sd card. Is it worth to write some higher ROM again?
Click to expand...
Click to collapse
Of course it worths, if it doesn't then why are we here?!
Try what i wrote above.
Now that you know how to recover your phone from softbrick you have nothing to fear, except from hard brick ( this may happen while trying to unlock the bootloader)
Why I am saying that is because now, with original stock rom it works very fast without lagging compared with cyanogenmod 2.2 version which I had before. So Just few more questions - Its just your opinion, I know that there are so many Roms but for you which one is the fastest one and the most stable?
And maybe it's possible to install this Rom with same flashtool?
BenasJ said:
Why I am saying that is because now, with original stock rom it works very fast without lagging compared with cyanogenmod 2.2 version which I had before. So Just few more questions - Its just your opinion, I know that there are so many Roms but for you which one is the fastest one and the most stable?
And maybe it's possible to install this Rom with same flashtool?
Click to expand...
Click to collapse
I can suggest you cm7 roms as they are smooth, bugfree and may have all the features you are looking for.
In order to install a rom on xperia x8 you need cwm or xrecovery(in most cases cwm), and this depends on the rom you are trying to install. To deside what recovery to use just read the installation instructions at the rom thread. So no, you can't install a rom with flashtool.
Everything is clear. Thanks a lot