[Q] facing problem with my note - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello everybody
before i was using galaxy nexus .. so i have previous experience
yesterday i just rooted my note and everything working well
i was going to install CM10 but i read that i have to downgrade to GB so i followed a video
first problem: after downgrading and installing the rom as the video maker made .. i tried to boot the rom but it stucks at rocket bootloader for more that 20 minutes (i know for the first time it may takes long time to boot but not 20 minutes) i had a nap in this 20 minutes
second problem: i said that if it's not working i am going to install the stock kernal and run the CWM and install stock rom .. i just installed the kernal and rebooted then i was showing the text { galaxy note GT-N 7000 etc....) it was rebooting in the same screen of text .. i tried to get the recovery mode but i can't {volume up + Power button + Home button) but i can enter downloading mode (Volume down + Power button + Home button)
i need solution for the second problem and explain for my why the first problem was like that
my heart falls down in my stomach

Firstly,you can directly flash jb rom directly from ics..Its not necessary to downgrade to gb
And after downgrading to gb,you should have tried doing a factory reset
Now,again try flashing stock gb rom and if the process gets failed,then what is the error you get??

soln
amansoori said:
Hello everybody
before i was using galaxy nexus .. so i have previous experience
yesterday i just rooted my note and everything working well
i was going to install CM10 but i read that i have to downgrade to GB so i followed a video
first problem: after downgrading and installing the rom as the video maker made .. i tried to boot the rom but it stucks at rocket bootloader for more that 20 minutes (i know for the first time it may takes long time to boot but not 20 minutes) i had a nap in this 20 minutes
second problem: i said that if it's not working i am going to install the stock kernal and run the CWM and install stock rom .. i just installed the kernal and rebooted then i was showing the text { galaxy note GT-N 7000 etc....) it was rebooting in the same screen of text .. i tried to get the recovery mode but i can't {volume up + Power button + Home button) but i can enter downloading mode (Volume down + Power button + Home button)
i need solution for the second problem and explain for my why the first problem was like that
my heart falls down in my stomach
Click to expand...
Click to collapse
Firstly may be u would ve forgot to do a clean wipe of cache n data.
Its a must while moving to CM roms.
N before this do a nandroid back up n then back up data n then try doing a wipe n install it should work damn fine.

Thank you for replying
i am trying now to install the stock 4.0.4 rom from hiemdall but i am facing problem interface failed
i think i didn't made the usb debugging
please provide me any way to flash the rom .. i have macbook pro

amansoori said:
Thank you for replying
i am trying now to install the stock 4.0.4 rom from hiemdall but i am facing problem interface failed
i think i didn't made the usb debugging
please provide me any way to flash the rom .. i have macbook pro
Click to expand...
Click to collapse
Try reinstalling hiemdall and better flash a gb rom

rajsekhar.300 said:
Try reinstalling hiemdall and better flash a gb rom
Click to expand...
Click to collapse
Follow this thread to get the file you want. If you have access to windows PC, install ODIN and follow the below thread for complete restoration to Stock rom using ODIN.
Remember to connect the phone in Download mode.
http://forum.xda-developers.com/showthread.php?t=1424997
Follow this thread to use Hiemdall
http://forum.xda-developers.com/showthread.php?t=878686

Done =)
Thank you all who replied and tried to help me
i just booted the windows 7 on my mac to download odin and flashed stock ICS and everything working fine

I directly installed cm10 from stock ics just 10 hours back. Its soft brick u need to flash the stock rom via odin. If cwm recovery is not coming. And then have to repeat the process.
Sent from my GT-N7000 using xda app-developers app

amansoori said:
Thank you all who replied and tried to help me
i just booted the windows 7 on my mac to download odin and flashed stock ICS and everything working fine
Click to expand...
Click to collapse
Good to hear:highfive:

Related

[Q] Need help with Jelly Bean Rom

Hi,
I have Galaxy Note with 4.0.3 rooted already. I tried to installed the Ultimate JB v5.1 from this thread
http://forum.xda-developers.com/showthread.php?t=1970626
Now I am having a problem. The Philz Touch 3 seems working now, but when I am trying to flash the rom. There is absolutely no progress BAR!
After 5-10 minutes the phone reboot itself. Then the JB rom was not installed. It stuck at a screen displays Installing applications.....
It will be like that forever.
and I can't go back to 4.0.3. I did not backup....
It seems like the OLD ICS is still on my phone but I can not enter the system. It says Installing Applications forever. Then if I connect a usb,
I actually can goto Setting, then I see the phone is still on 4.0.3.
Seems like I only partially wiped out the old ICS? I could not see the internalsd from my PC after connect the USB.
I have also formatted EMMC... am I screwed?
Is there a way to save the phone?
Please help.
Many many thanks
Tony
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
nokiamodeln91 said:
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
Click to expand...
Click to collapse
Thanks for replying, I think I am able to Reboot Download from Philz Touch 3. I will certainly try that.
Currently it seems like I still have old system remained in my phone but partially. That might be why I could not boot.
I will try that option.
Thanks
Tony
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
hom.hom said:
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
Click to expand...
Click to collapse
Thank you so much!. I will try that.:good::good:
Tony

[Q] After rooting phone is not starting, please help...

Hi,
I have Samsung Galaxy S I9000 running Ginger Bread.
I wanted to upgrade my phone to Ice Cream Sandwitch or Jelly Beans. In order to do it, I started with below steps to root my mobile.
1. Installed latest Clockwise Mode application into my phone.
2. Installed Odin3 v1.7 in my laptop.
3. Downloaded CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar on my laptop.
4. Started Odin first.
5. Disconnected mobile and started in download mode with Volume Down + Home Button + Power Key.
5. After starting the download mode, connected mobile to laptop using the USB.
6. Keep all the default values in Odin3 i.e. Re-Partition option unchecked, Auto Reboot and F-Reset Time option enabled. Selected tar file CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar in PDA option.
7. Connected mobile and it detected ID Comm [Highlighted in Yellow].
8. Finally click on Start button.
After starting the process was completed and Yellow color changed to Green one, phone was auto reboot.
But after reboot it is just stuck on start of screen and not going ahead. I wait for 2 hours but still not working.
Could you please help me how I can solve this issue now?
Did you try to pull battery out and restart the phone again?
Do you still can go in CWM with 3 button combo again?
If yes then try to flash a ICS or JB kernel (depending on what ROM you finally want to have on your phone) via CWM and then go in advanced and restart recovery (if available), otherwise just try to flash the rom.zip on top.
If CWM is not possible, the go in download mode an falsh a tar version of kernel via ODIN.
Here are different semaphore kernels for each android version:
http://78.46.194.137/downloads/gt-i9000-ics
http://www.semaphore.gr/downloads/gt-i9000-jb
For ics it should work after 1. flash, but for JB you have to flash it 2 or even 3 times, if after restart phone does not boot. Then battery out again, start in recovery and flash zip again.
Good luck and good success .
I think, at this position, installing a new gingerbread stock ROM will be preferable. Try installing XXJVU. Then root with cwm and install any slim bean version in case you are interested to use jelly bean.
Sent from my GT-I9000 using xda app-developers app
Sure that will be the best way....but my suggestions do not take much time, so why not give them a try .
But if its not going, then a restock is the best you are right:
What I always do for restock is using slappys rescue kit.
Unzip it and flash the Rom via Odin. There is everything, also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
If you want to have slim rom then its recommended to flash CM9 first or flash a modem afterwards via cvm, because slim does not have a modem included.
And/Or just follow the installation guides/recommendations from the single ROM Threads.
Thanks Guys for your help.
My issue is resolved with below post.
http://forum.xda-developers.com/showthread.php?t=1809098
phone not starting
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
viral1999 said:
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
Click to expand...
Click to collapse
You are here in totally wrong section: this is a i9000 help thread section. Hopefully you didn't flash a i9000 rom, otherwise your phone is hard bricked.
tetakpatalked from Nexus 7 flo
Me 2: It was from low battery in my case
I had similar problem when rooting my Samsung Galaxy S5 smartphone with Odin3. After rooting with a success message my phone was showing just the Samsung Logo each time I was trying to turn it on without loading OS. I googled and directed here and connected my phone to the charger as its mentioned in a link you provided which solved your problem. It turned on automatically after a few minutes while of charging and when turned on it was charged approximately 40%.
As I was very afraid my phone got serious harm at first I hope this maybe a sedative probability for duds really worry about what happened to their smartphone.
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Imbhavya said:
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Click to expand...
Click to collapse
What exactly did you do, which phone model and what does it display now?
Sent from my A0001 using Tapatalk

[Q] Dead? Blackscreen without logo N7000 4.0.3

Hi,
I'm a newbie who has a Galaxy Note N7000, 4.0.3 with kernal LQ3.
I wanted to root and install a new room.
I downloaded "PhilZ-cwm6-XXLQ3-OXX-v3.99" and successfully installed it via my microSD-card.
Without booting my phone I by mistake installed "gapps-jb-20130301-signed" and it worked flawless as well, so I thought why not try install the ROM directly as well - without rebooting the phone hence I started the installation of "JellyBeer-v4.32-29062013-101059-n7000". This was made without choosing "wipe data/cache".
Everything seemed to work fine, and it was in the stage "installing".
Without noticing the screen turned black and I got panic and after 20 sec I removed the battery. Now the phone doesn't react on either the power button or recover mode. The screen just continues to stay black. Can see any indication once connected to the charger either....
Can you please help me with advises?
Can you enter the download mode (vol down + home + power). If you can, download one of the stock ROMs from sammobile.com and flash using PC ODIN. This should take you back to the stock ROM after which u can again root using the Philz kernel. And before flashing, please read the instructions carefully. You have to flash the ROM first after a data/cache wipe and then gapps (if needed).
Hi,
It dosen't seem to react to the download mode....
Is it possible to do something by entering the phone's hardware? Remove battery - for cache restore or similar?
Varad297 said:
Can you enter the download mode (vol down + home + power). If you can, download one of the stock ROMs from sammobile.com and flash using PC ODIN. This should take you back to the stock ROM after which u can again root using the Philz kernel. And before flashing, please read the instructions carefully. You have to flash the ROM first after a data/cache wipe and then gapps (if needed).
Click to expand...
Click to collapse

[Q] Softbricked - Stuck on Samsung logo

Hi Guys/Gals
I appreciate that there are quite a few thread out there for softrbick solutions but some are a little dated and tbh i didn't want to do something that would further wreck my phone so i needed your guys expert advice.
Ive have a GT-N7000 (unrooted and with custom rom) and its softbricked its currently just booting to the Samsung screen (no triangle) and just stays like that.
Before this happened i was running Bam Andriod Jelly bean and wanted to update to Bam Andriod 2.0 (KitKat).
So i followed a video that showed how to install a "safe" CWM to enable me to install KitKat Custom rom from RootGalaxyNote
Once i re re-booted into the new CWM 3.0.4.5 i did a full factory wipe and then proceed to install the Bam Andriod 2.0, Installation went fine.
I restarted the phone......and thats went i started getting the loop.
I cant access the recovery now (vol up + power + Home bttn doesnt work) but i can access the download screen (vol down + power + Home bttn).
I would like to try and get the phone up and running before Christmas so all help will be appreciated peeps.
Step by step instructions would be even more appreciated.
Thanks.
I don't know how to flash bam ROM 2 safely but I'll tell you how to get out from the boot loop safely.
Using pc Odin you can flash stock firmware through the download mode ... mainly gingerbread to avoid the brick bug and root it and start allover again from there.
Use the instructions and software provided by Drketan on this thread http://forum.xda-developers.com/showthread.php?t=1424997
Sent from my GT-N7000 using xda app-developers app

[Q] GT-S6500D Bootloop or soft brick

Hello,
i'm using CM11 M12 From midzian21, today i saw the Port Sound Mod Dolby by D2Y aka E. When i flash it according to the instruction, i restart it and then my phone get bootloop(boot animation repeat for about 30 minutes) i flash the stock rom first the latest for my country, then few from other forums and this not help bootloop stuck. So i try find out how to fix it, then i found Rescue PDA Final and this had not even start. Please can you help me? (Sorry, for my english)
celtol said:
Hello,
i'm using CM11 M12 From midzian21, today i saw the Port Sound Mod Dolby by D2Y aka E. When i flash it according to the instruction, i restart it and then my phone get bootloop(boot animation repeat for about 30 minutes) i flash the stock rom first the latest for my country, then few from other forums and this not help bootloop stuck. So i try find out how to fix it, then i found Rescue PDA Final and this had not even start. Please can you help me? (Sorry, for my english)
Click to expand...
Click to collapse
1) try to get in recovery and make factory reset (hint: go to download mode, then reset device and as quickly as possible press vol up + vol down + home to enter recovery)
2) I'm not responsible for any mods which I didn't tested on my build, so that D2Y Indonesian guy maybe didn't tried it out properly or you had some other mod which maybe make problems
3) I was testing back in days some mods but barely oworks just because it had older base for ROM (builds prior August 2014 most of time) and if I made it to work on latest CM11 then I had some problems with SystemUI and FC's
Sent from xda free using Mini 2 with Stock ROM (reverted so my mom can use it)
Thanks for fast answer,
I do not have access to recovery tried at least 10 times and nothing.
celtol said:
Thanks for fast answer,
I do not have access to recovery tried at least 10 times and nothing.
Click to expand...
Click to collapse
hint: try to flash cwm any 6.0.x version with Odin and then try to get in recovery...
also note: if you get in bootloop after flashing mods - do a factory reset from recovery.... it helps a lot.
sent from some crappy old laptop
I tried this solution before, still i have no access to recovery.
I had bring my phone to GSM service in my city, and they repair it. Thread to close
i have a problem like that , i tried to enter the recovery mode but could not ,and i tried to enter the download mod but it keep crushing ,i wonder if someone could hep me

Categories

Resources