guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
ankitxperia said:
guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
B.Jay said:
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
Click to expand...
Click to collapse
thanks for the reply cause i think the problem causing is due to driver
previously in my old machine i used gordon driver at that time every thing worked fine
lol, wtf do you mean, changed driver? you got rid of the driver?
meh, never mind.
ankitxperia said:
thanks for the reply and what about drivers should i install drivers which came from flashtool ot the gordon driver
cause i think the problem causing is due to driver previously in my old machine i used gordon driver at that time every thing worked fine
Click to expand...
Click to collapse
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
B.Jay said:
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
Click to expand...
Click to collapse
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Thanks in advance
ankitxperia said:
still no luck using flash tooll version 0.53
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1
Newer versions won't work with your crap of an severly outdated OS.
ankitxperia said:
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc.
Thanks in advance
Click to expand...
Click to collapse
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
ankitxperia said:
i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Click to expand...
Click to collapse
1st: Your computer OS is a bit old, outdated........That is one of the reason's why it crashes
I suggest you get a new OS or update your OS
I.E
LinuxMint (what i use, but im still unable to use flashtool at all LOL)
OR
Move to a newer version of windows I.E: Windows vista or Windows 7
Hope it helps
-wilbso
wilbso said:
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
B.Jay said:
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
Click to expand...
Click to collapse
it makes sense now
wilbso said:
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
i got this version from here not from hell
http://androxyde.github.com/Flashtool/
i will check and report soon thanks
Related
When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
kashmir83 said:
When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
Click to expand...
Click to collapse
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Aylarth said:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Click to expand...
Click to collapse
Yeah I've tried this package. Same error.
RagnarIceblood said:
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Click to expand...
Click to collapse
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
RagnarIceblood said:
Yeah I've tried this package. Same error.
Click to expand...
Click to collapse
dang... then this is something I cant help in, I'm really sorry
kashmir83 said:
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
Click to expand...
Click to collapse
All I know is that this usb driver package helped me and my gf either, without this pack I got the same error like you did, and since then everything works properly. If this package cant help you then I have to admit this is beyond my knowledge.
Just found our that i left my usb cable at work
Thanks again for your suggestion. I will try this after the weekend.
Aylarth said:
dang... then this is something I cant help in, I'm really sorry
Click to expand...
Click to collapse
Some more info.
The last one is from Event Viewer, where it claims that this version of Windows does not support Windows Portable Device drivers.
What a bunch of bollox, my HTC HD2 synced just fine. Must be Samsung crappy driver I guess.
And yeah, I got v 4.5 of windows installer.
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
RagnarIceblood said:
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
Click to expand...
Click to collapse
huh?.. mediaplayer? wierd solution ..
I had this issue too, on my moms pc.
I installed kies befor plugging my phone to the pc, it worked perfectly then, installed the drivers and all. could not see if you had tried that. so its worth a shot
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
drhonk said:
huh?.. mediaplayer? wierd solution ..
Click to expand...
Click to collapse
Not really, WMP 10 is the one responsible for the stock MTP driver.
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Just a quick note on what I discovered last night when trying to get my SGS connected.
Bluetoothe needs to be off
It has to be using the stock Home screen I was as ever using LauncherPro. As soon as I switched back to stock it connected.
rocketpaul said:
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Click to expand...
Click to collapse
try what I did, re-install WMP 10 (or 11)
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
TeamSancheZz said:
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
Click to expand...
Click to collapse
how do you do that btw?
reinstall wmp11
hey ive got the same problem..
but how do you reinstall windows media player 11 on vista?
AllGamer said:
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
Click to expand...
Click to collapse
Unfortunately, this did not fix it on my droid X
Today I've Strange problem
flashtool gives me an error of jave
i don't know why
Info:
Windows 7 32 bit
Flashtool 6.8.0 and newest .9.0.0
any suggestion ?
..............................
edit:
flashtool 2.9.1 works perfectly
but any newer version not
.......................
edit:
flashtool 6.8.0 was working perfectly on that windows but suddenly stopped
semdxd said:
Today I've Strange problem
flashtool gives me an error of jave
i don't know why
Info:
Windows 7 32 bit
Flashtool 6.8.0 and newest .9.0.0
any suggestion ?
..............................
edit:
flashtool 2.9.1 works perfectly
but any newer version not
Click to expand...
Click to collapse
try to reinstal
fotak-x said:
try to reinstal
Click to expand...
Click to collapse
i re installed it twice but no hope
i also re installed jave
Reinstall the windows and latest software
It will work
officially corp via W8
Yeah, install latest java and try
Update your Java
Or
- RESTART your PC
- go to SAFE MODE WITH NETWORK
It's because some PC have problem with java
Sent from my E15i
up
not solved yet
thnx for helping
i tried everything
Yes,
You have to reinstall your windows bro
i've ever got this problem too, after i reinstall the windows and reinstall the tool & driver, my problem solved
Strange problem
flashtool 2.9.1 stopped
now flashtool .9.0.0 works perfectly
Was updating to the latest firmware and the pc crashed, so now my phone wont turn on.
can someone please upload the device driver for me so my laptop can detect my device.
many thanks
gibbo82 said:
Was updating to the latest firmware and the pc crashed, so now my phone wont turn on.
can someone please upload the device driver for me so my laptop can detect my device.
many thanks
Click to expand...
Click to collapse
right, ok. managed to download them from the sony website, but there all files in folders. how do i install them manually?
Sorted now
Sent from my C6903 using Tapatalk
Would you mind telling us how you sorted the problem?
Have disc method
bogdan wst said:
Would you mind telling us how you sorted the problem?
Click to expand...
Click to collapse
Im not sure. But if everything fails u can use the have disc method.
How to; google it. There is detailed instructions on the laptopvideotogo page. This basically forces install of a driver, it will work as long as the driver is installed at the right device, and at the right tine ( flash mode, bios and normal operating mode utilize different drivers )
I managed to sort my laptop in the end which already had the drivers installed. Ended up having to do a repair
Sent from my C6903 using Tapatalk
I'm having a problem with Flasshtool latest version i installed it and won't run. My laptop OS is windows 8. It just won't run after i installed it and open it. Just loading a bit and then nothings happen. I also tried the previous version of it and have the same problem.
try the version 0.9.22.3
gelotalion said:
I'm having a problem with Flasshtool latest version i installed it and won't run. My laptop OS is windows 8. It just won't run after i installed it and open it. Just loading a bit and then nothings happen. I also tried the previous version of it and have the same problem.
Click to expand...
Click to collapse
try the version 0.9.22.3
soujirock said:
try the version 0.9.22.3
Click to expand...
Click to collapse
Thanks i will try that. Hope it will work
I tried it but still no good. I also tried the old version but nothing happens too.
gelotalion said:
I tried it but still no good. I also tried the old version but nothing happens too.
Click to expand...
Click to collapse
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
soujirock said:
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
Click to expand...
Click to collapse
Thanks for your reply I'll try this now
soujirock said:
look I had a similar problem, what I did was reinstall the drivers according to the phone model drivers install companion xperia download the latest version of flashtool and I worked
Click to expand...
Click to collapse
I did what you said and still won't work
i successfully launched flashtool the problem is in mozilla firefox plugin i guess. The only problem is my flashtool said No Device registered even if i installed all the drivers correctly. When I'm trying to sync in github it's just stuck on it nothing happens.
17/036/2016 10:36:56 - ERROR - No device is registered in Flashtool.
17/036/2016 10:36:56 - ERROR - You can only flash devices.
gelotalion said:
i successfully launched flashtool the problem is in mozilla firefox plugin i guess. The only problem is my flashtool said No Device registered even if i installed all the drivers correctly. When I'm trying to sync in github it's just stuck on it nothing happens.
17/036/2016 10:36:56 - ERROR - No device is registered in Flashtool.
17/036/2016 10:36:56 - ERROR - You can only flash devices.
Click to expand...
Click to collapse
look I have windows 7 and I had problems with earlier versions of flashtool, what I recommend is that you make a test on another pc since apparently it is problem of your USB ports, or failing that should see if the USB port your phone works properly.
soujirock said:
look I have windows 7 and I had problems with earlier versions of flashtool, what I recommend is that you make a test on another pc since apparently it is problem of your USB ports, or failing that should see if the USB port your phone works properly.
Click to expand...
Click to collapse
I made it thanks for the help. I also root my z1. I just have one question if i update it to lollipop is the root access will gone or it will not?
I have an xperia xz3 that was updated to android 10 and then started bootlooping and it wont go out of it. Ive tried to use flashtool and other programs to reflash the software but sadly it isnt recognized with windows on any of my machines (yes i have the drivers installed) It shows up in emma and reveals the imei but im unsure if thats the actual IMEI. I can get the phone into flash and fastboot mode. But it simply comes up as Android with a warning sign telling me my drivers for it arent installed correctly (which they are to my knowledge). I am very aware that many people are having this issue and im curious as to see if its hardware or software related. My phone is in flawless shape besides a few minor scratches. I can provide any more info if needed please help me thanks!
Varied Gamer said:
I have an xperia xz3 that was updated to android 10 and then started bootlooping and it wont go out of it. Ive tried to use flashtool and other programs to reflash the software but sadly it isnt recognized with windows on any of my machines (yes i have the drivers installed) It shows up in emma and reveals the imei but im unsure if thats the actual IMEI. I can get the phone into flash and fastboot mode. But it simply comes up as Android with a warning sign telling me my drivers for it arent installed correctly (which they are to my knowledge). I am very aware that many people are having this issue and im curious as to see if its hardware or software related. My phone is in flawless shape besides a few minor scratches. I can provide any more info if needed please help me thanks!
Click to expand...
Click to collapse
And no it isnt waterdamaged nor does it seem to overheat when being powered on.
Varied Gamer said:
And no it isnt waterdamaged nor does it seem to overheat when being powered on.
Click to expand...
Click to collapse
Try Linux
Maybe your windows has a driver problem
MartinX3 said:
Try Linux
Maybe your windows has a driver problem
Click to expand...
Click to collapse
So you're saying I should make a virtual machine and see if its detected on there?
Varied Gamer said:
So you're saying I should make a virtual machine and see if its detected on there?
Click to expand...
Click to collapse
Yes
Or Boot linux from an USB stick
MartinX3 said:
Yes
Or Boot linux from an USB stick
Click to expand...
Click to collapse
I just booted to linux but how am I supposed to install the device drivers? And also how do I see what's connected linux is confusing lol
Varied Gamer said:
I just booted to linux but how am I supposed to install the device drivers? And also how do I see what's connected linux is confusing lol
Click to expand...
Click to collapse
Just install the android platform tools there for adb and fastboot
The drivers are already integrated in Linux [emoji14]
MartinX3 said:
Just install the android platform tools there for adb and fastboot
The drivers are already integrated in Linux [emoji14]
Click to expand...
Click to collapse
I've got as fastboot installed now. I put the phone in fastboot mode and I typed in fastboot devices and it's showing
"???????? fastboot"
Idk what to do from here I'm not sure if it's recognizing the phone or not
Varied Gamer said:
I've got as fastboot installed now. I put the phone in fastboot mode and I typed in fastboot devices and it's showing
"???????? fastboot"
Idk what to do from here I'm not sure if it's recognizing the phone or not
Click to expand...
Click to collapse
Did you replace your number by ???? ?
Or doesn't really show ???? In the terminal?
I mean your phone is now recognized and you can flash which stock you want with newflasher and xperifirm from XDA.
MartinX3 said:
Did you replace your number by ???? ?
Or doesn't really show ???? In the terminal?
I mean your phone is now recognized and you can flash which stock you want with newflasher and xperifirm from XDA.
Click to expand...
Click to collapse
It appears as a bunch of question marks as stated above. Also when I type the usual things such as fastboot reboot recovery it says unknown reboot target recovery. And when I try to do as reboot recovery it says error no devices or emulators found. But I'll try and install new flasher to see if it detects it
Start newflasher with sudo
OR with the udev package you may install before
MartinX3 said:
Did you replace your number by ???? ?
Or doesn't really show ???? In the terminal?
I mean your phone is now recognized and you can flash which stock you want with newflasher and xperifirm from XDA.
Click to expand...
Click to collapse
I can't seem to figure out how to get new flasher to run on linux. I downloaded it then extracted it but when I click on the .exe file it just brings me to another sub folder with a bunch of data that's confusing. I don't know how to open it or get it to work at all
Use the Linux version
MartinX3 said:
Use the Linux version
Click to expand...
Click to collapse
Can you give me link on where i get that? I couldn't figure it out
Varied Gamer said:
Can you give me link on where i get that? I couldn't figure it out
Click to expand...
Click to collapse
It's in the newflasher XDA thread
The *.x64 file
MartinX3 said:
It's in the newflasher XDA thread
The *.x64 file
Click to expand...
Click to collapse
GOOD NEWS!!
I was actually able to get it to work on windows with newflasher. Turns out that it turns on fine now. But there's a big issue. Whenever I shut it off or restart the phone it goes back into the bootloops until I reflash the software again. Then it will turn on fine and work indefinitely until it's shut off. Do you know what might be causing this issue or how I could fix it?
good news is I'm making progress lol
Varied Gamer said:
GOOD NEWS!!
I was actually able to get it to work on windows with newflasher. Turns out that it turns on fine now. But there's a big issue. Whenever I shut it off or restart the phone it goes back into the bootloops until I reflash the software again. Then it will turn on fine and work indefinitely until it's shut off. Do you know what might be causing this issue or how I could fix it?
good news is I'm making progress lol
Click to expand...
Click to collapse
Nice!
You could try to do a fullwipe with fastboot -w
MartinX3 said:
It's in the newflasher XDA thread
The *.x64 file
Click to expand...
Click to collapse
MartinX3 said:
Nice!
You could try to do a fullwipe with fastboot -w
Click to expand...
Click to collapse
Ok so basically it had a Google lock so I bypassed that and after the bypass it appears to be working normally? I shut it down a few times and turned it back on and it booted up in under 15 seconds! Hopefully it stays that way and I didn't jynx it but all I can do is hope! But for now it is fixed!!! I'm very happy right now as I got this phone for only $33
Varied Gamer said:
Ok so basically it had a Google lock so I bypassed that and after the bypass it appears to be working normally? I shut it down a few times and turned it back on and it booted up in under 15 seconds! Hopefully it stays that way and I didn't jynx it but all I can do is hope! But for now it is fixed!!! I'm very happy right now as I got this phone for only $33
Click to expand...
Click to collapse
Nice to hear
But sadly it sounds like you bought a stolen phone
MartinX3 said:
Nice to hear
But sadly it sounds like you bought a stolen phone
Click to expand...
Click to collapse
Oh no it's not stolen. The person who had it before updated it and got the issue so they sold it off. The imei is clear with no signs of it being stolen. Hope this clears some things up!