[Q] ICS connect to computer? - TouchPad Q&A, Help & Troubleshooting

So incredibly stupid question, and not even sure how to search for it to get an answer... but I want to connect my touchpad to my computer like I used to with CM7 and transfer files over. Normally when I connected it in the past I'd get a little notification telling me I can turn on usb storage or whatever... that doesn't show up now with CM9... what do I do?

If you read the wiki, it doesnt work with cm9 yet. Boot into recovery, go to Mounts and Storage, then go down to Mount USB Storage.

xanderharris86 said:
So incredibly stupid question, and not even sure how to search for it to get an answer... but I want to connect my touchpad to my computer like I used to with CM7 and transfer files over. Normally when I connected it in the past I'd get a little notification telling me I can turn on usb storage or whatever... that doesn't show up now with CM9... what do I do?
Click to expand...
Click to collapse
Try using Wifi File manager apps.
I use the Wifi File Explorer Pro do transfer files from my PC to android devices. No physical connection is needed since it's done through wifi.
Install this app (or others. They seem to work very similarly) and launch the app on the device. Leave it running so if you have a lot of files, you might want to keep it plugged into a charger.
The apps will give you an IP address.
Go to your PC and launch a web browser. Type in the address the app gave you. You are now connected. Go to the folder you need to add files to and search your PC for files to transfer. Done...

xanderharris86 said:
So incredibly stupid question, and not even sure how to search for it to get an answer... but I want to connect my touchpad to my computer like I used to with CM7 and transfer files over. Normally when I connected it in the past I'd get a little notification telling me I can turn on usb storage or whatever... that doesn't show up now with CM9... what do I do?
Click to expand...
Click to collapse
What I'm told you are supposed to do is to open /Settings/Developer Options and uncheck Android debugging. Then when you connect to a Windows computer, it will see the TP as an MTP device.
Unfortunately, I've yet to get this to work. I've tried a couple of Win7 boxes and both see the TP as an MTP device and try to load drivers for it. But after a couple of minutes trying, it pops up an error message saying if failed to load the drivers. On an XP box the only option you get when you plug in the TP are to use either Media Center or Winamp, both of which seem to look only for "media" files.
The only way I've found to transfer files directly to/from the TP is to reboot and choose Clockwork Mod from the boot menu and then /mounts and storage/mount USB storage. Then your TP appears as a regular USB hdd on whatever computer you connect.
I've tried to google for MTP support but the only things I've found relate to connecting Digital Cameras.

Okay so no offense but you all have it wrong. I can see my CM9 Alpha 2 in my Windows 7 desktop machine just fine. You need to do the following:
1) Go into Settings
2) Click on the Storage
3) Up in the right top corner of your TouchPad screen you see 3 boxes, click (touch) that.
4) Then click (touch) USB computer connection that pops up
5) Now make sure the box labeled Media device (MTP) is checked
DONE! You should be able to connect your TouchPad booted into CM9 Alpha 2 and transfer files over to it just fine. Mine comes up as cm_tenderloin on my Windows 7 64-bit if I recall correctly!
I hope this helps and I hope it works! Let me know!

xanderharris86 said:
So incredibly stupid question, and not even sure how to search for it to get an answer... but I want to connect my touchpad to my computer like I used to with CM7 and transfer files over. Normally when I connected it in the past I'd get a little notification telling me I can turn on usb storage or whatever... that doesn't show up now with CM9... what do I do?
Click to expand...
Click to collapse
Read this thread, I think that the information you're looking for could be here.
forum.xda-developers.com/showthread.php?t=1508572

alias4ever said:
Okay so no offense but you all have it wrong. I can see my CM9 Alpha 2 in my Windows 7 desktop machine just fine. You need to do the following:
1) Go into Settings
2) Click on the Storage
3) Up in the right top corner of your TouchPad screen you see 3 boxes, click (touch) that.
4) Then click (touch) USB computer connection that pops up
5) Now make sure the box labeled Media device (MTP) is checked
DONE! You should be able to connect your TouchPad booted into CM9 Alpha 2 and transfer files over to it just fine. Mine comes up as cm_tenderloin on my Windows 7 64-bit if I recall correctly!
I hope this helps and I hope it works! Let me know!
Click to expand...
Click to collapse
This worked for me, Thanks alias4ever!

alias4ever said:
Okay so no offense but you all have it wrong. I can see my CM9 Alpha 2 in my Windows 7 desktop machine just fine. You need to do the following:
1) Go into Settings
2) Click on the Storage
3) Up in the right top corner of your TouchPad screen you see 3 boxes, click (touch) that.
4) Then click (touch) USB computer connection that pops up
5) Now make sure the box labeled Media device (MTP) is checked
DONE! You should be able to connect your TouchPad booted into CM9 Alpha 2 and transfer files over to it just fine. Mine comes up as cm_tenderloin on my Windows 7 64-bit if I recall correctly!
I hope this helps and I hope it works! Let me know!
Click to expand...
Click to collapse
after you transfer file from the comp to tp via this method, how do you find the file on the tp?
Thanks

na_tra said:
after you transfer file from the comp to tp via this method, how do you find the file on the tp?
Thanks
Click to expand...
Click to collapse
The same way you'd find any other file on the TP. Use a File Manager such as Root Explorer.

lewmur said:
The same way you'd find any other file on the TP. Use a File Manager such as Root Explorer.
Click to expand...
Click to collapse
thanks for your help

I'll have to try this MTP option. I've just been using the wifi file browsers like Airdroid or booting into WebOS for file transfer. Thanks.

Related

USB Mount Issues (CM7)

Hey, everyone, I tried posting about this in the CM7 general discussion thread, but no one seemed apt to respond.
I think this was a problem that popped up in the 60s or 70s in terms of nightlies, but I'm having it again now since around the 155 mark.
I'm on 160 and when I plug my NC into the USB cable, I no longer get any options to connect for file transfers in the notification area. If anyone could help me out with this, I'd really appreciate it. It's just so perplexing and no one seems be having this issue except me. If it's user-side error, that's fine as well, I'd just like to know how to fix it.
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
votinh said:
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
Click to expand...
Click to collapse
1. No, nothing comes up.
2. The notification area remains blank.
3. I'm running it off eMMC.
Thanks for taking the time, by the way!
If so, unplug the usb cable then replug in a few times and see what happens.
If still nothing, try to use other usb cable.
Oh, btw, have you had Nookcolotweaks app installed?
I do have Nook Tweaks installed, yes. I'm using the cable that came with the Nook, but I'm not sure I have any other cables around.
Do make sure you check OFF the USB Host feature (reboot and reconnect)
I gave that a try, too, but still nothing. So confusing!
Don't be so hard on yourself.
Let try it on different computer if you have.
Also try difference usb cable.
Last, if nothing works, update latest nightly build
When you disconnect and reconnect the nook in testing/trying to get it recognized... unplug usb cable from computer... its made a difference at times.
I know this sounds basic but in applications-settings ensure you have usb debugging checked. Sometimes when flashing different nightlies, settings change.
Sent from my NookColor using Tapatalk
Thanks again for all the help, everyone! I made sure USB debugging was checked and tried unplugging/replugging the cable, but there's still no notification coming up.
A new development:
I tried connecting it to my Windows PC instead of my Linux and it brought up this message that said it didn't recognize the device. I also tried to get ADB to see it and it can't. Does this information help or am I in trouble here?
Next time, do clearly indicate that you are using Linux or Windows. I'm sure many members here are Linux but still far less support than Windows world.
When I provided those suggestions in previous posts, I meant in Windows.
Anyway, back to your issue.
1. "it didn't recognize the device" because of missing adb usb driver. You need to get it installed first in order to use ADB, however it has nothing to do with your usb mass storage function. For now, you don't need to worry about it just yet.
2. Back to my question before, have you seen any "removable" on the PC (Windows)
Along with USB Host uncheck, if still having problem, I would suggest you either downgrade to the earlier versions or wait until tomorrow and update with another nightly build.
Good luck
I have the ADB drivers installed in Windows, as far as I know. I've used it before.
I typed "adb devices" into the prompt and it doesn't see the NC at all. Since one of the nightlies seems to be what prompted this sudden change in connectivity, I guess I'll just hope that one of the new ones can fix it. Thanks again.
Also, Windows doesn't show anything "removable" except for my external HD.
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
arda99 said:
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
Click to expand...
Click to collapse
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
junkrobot said:
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
Click to expand...
Click to collapse
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
If you've installed ADB drivers, you might want to remove it as this might mess up usb storage.
arda99 said:
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
Click to expand...
Click to collapse
Alrighty. I have those two. I've connected my NC to ADB both wirelessly and and with the cable in the past, so this should all be straightforward anyhow. It just plain refuses to cooperate.
Go to the Marketplace and download "Nook Color UMS" app. Follow instructions and it will mount properly. I had the same issue used it and it mounts proper through the app.

[Q] Phone won't mount as disc drive, Win 7.

I'm using dReWs Ginger Faux ICS Rom (first rom in my sig) and its been mounting fine until a few days ago. When they're both connected by the usb cable, i get the notification if i want to copy files to/from the pc, so i click that and i get to the option to turn on the mass storage thing, so i press okay to that and at first it's a green android, then when it's done, its orange. The thing is, that when it claims to be mounted as a disc drive, i check my computer and it's not showing up. I checked the devices and printers menu and it shows up as android phone, so i tryed to update the driver for it but apparently it is already. I also have "HTC BMP USB Driver" installed as well as "HTC Driver Installer". I had them installed since i was using htc sync but i'm not anymore. Should i uninstall them? Lemme know if you can help, thanks.
If you need more info, just let me know...
Edit- sigh...
Can someone help me? Or should i go to the Windows 7 forum instead?

[Q] Fresh CM9 install. Win 7 PC won't connect to Touchpad.

Hi all,
Just flashed CM9 on my Touchpad and am wondering if I'm missing a USB driver or something. When I was on WebOS I could connect the TP to my PC and select the option to turn on Mass Storage with no issues. After flashing when I connect the TP Win 7 tries to install a driver but fails to do so.
What am I missing? I can connect my Galaxy Nexus to the PC with no issues so I'm at a loss.
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Bingo. That was it.
Thanks guys!
(Isn't it odd that neither MTP or PTP is checked by default?)
Edit: Looks like I spoke too soon. When connected via PTP the computer recognizes the connection but for some reason won't let me copy/paste anything to the SD Card. When I try to connect via MTP the PC just says its a "USB composite device" so I can't access the volume. Grrrr.
Windows XP and MTP Problem
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Thanks for the help!!! Keep up the good work.
BAM! Worked like a charm!
I was getting a little frustrated. You guys are lifesavers.
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
desiretouchpad said:
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Click to expand...
Click to collapse
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
thanks guys. got the same problems with OP. now it solved. again, thanks to u 2.
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Wow Thank you so much guys!
wow, worked like a charm.
codehunter13 said:
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Click to expand...
Click to collapse
I agree. Even if you get the USB connection to work in CM9, there is a file size limitation on transfers. I don't recall exactly what the size is but I know I had trouble with a "nightly" image I was tryubf to install. Now I either use CWM or transfer via a wireless FTP app. "WiFi File Transfer" from the Play Store.
Wifi is a little slower but you don't have to bother connecting the cable and setting everything up. Once you set up WiFi FT the first time, it just takes a couple of clicks to connect and start a file transfer.
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
Click to expand...
Click to collapse
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
Click to expand...
Click to collapse
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
normalife said:
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
Click to expand...
Click to collapse
Yeah but all you have to do is go to your Device Manager and update the driver from there
Sent from my cm_tenderloin using Tapatalk 2
make sure you uncheck the usb debugging mode in the developer settings
worked for me like a charm
colin_zz said:
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Click to expand...
Click to collapse
Good job! Thanks.

Please Help - Flashed Marshmallow 6.0 now only 24 gb space on 64 gb phone!

As title says. Also when I connect to USB into my windows computer the N6
icon appears, when I click on it its blank, no files! I tried to copy my pics and it
says devise cannot accept!
Seems my storage partition is somehow lost. I tried to reflash 2x, same result.
Can anyone guide me on what to do.
CC
cc999 said:
As title says. Also when I connect to USB into my windows computer the N6
icon appears, when I click on it its blank, no files! I tried to copy my pics and it
says devise cannot accept!
Seems my storage partition is somehow lost. I tried to reflash 2x, same result.
Can anyone guide me on what to do.
CC
Click to expand...
Click to collapse
Try doing a factory reset from within Android, I hope this helps.
http://forum.xda-developers.com/nexus-6/help/64gb-stuck-23gb-t2970279
Read down a few posts. It worked for me on 5.1.1.
I also have the same problem but with the 32gb version.
I started with a locked unrooted 5.1.1 Nexus 6.
I followed the instructions from Google's file image site.
I unlocked the boot loader.
Then ran the flash all script that failed, so I manually flashed the phone.
Phone rebooted and started up fine.
I attempted to re-lock the boot loader but it failed.
When connected to a windows system the phone shows up on auto play but file explorer shows No files or folders.
Tried a factory wipe still nothing.
worked
knightsh said:
http://forum.xda-developers.com/nexus-6/help/64gb-stuck-23gb-t2970279
Read down a few posts. It worked for me on 5.1.1.
Click to expand...
Click to collapse
That worked! TY
Now my last problem, when I enable USB debugging, plug into computer accept the computer
on the N6 and then I goto transfer my music files etc like I have done a million times before,
The icon appears on the computer when I double click its empty and I cannot
write to it! Any suggestions?
CC
This happened to me. I performed the advice recommended above and this fixed it for me
Edit: Ha. You just beat me.
copy
danieljw said:
This happened to me. I performed the advice recommended above and this fixed it for me
Edit: Ha. You just beat me.
Click to expand...
Click to collapse
Can you copy files to device with usb?
CC
cc999 said:
Can you copy files to device with usb?
CC
Click to expand...
Click to collapse
Yes. The phone defaults to charge-only mode via USB, which prohibits file transfer; this is why the device folder was empty in Windows. Switch to MTP mode via the notification shade and it will appear as it normally does.
In addition, in Developer options, you can configure the default USB mode, so as to prevent this from happening in the future.
or, just move into the 21st century, and use a program like wifi explorer pro, and never have to connect with a usb cable to transfer anything ever again..
wase4711 said:
or, just move into the 21st century, and use a program like wifi explorer pro, and never have to connect with a usb cable to transfer anything ever again..
Click to expand...
Click to collapse
Agreed that apps like this are very convenient. Sometimes still prefer hardwiring for transferring 20-30 GB worth of stuff, even though MTP is a total drag.
danieljw said:
Yes. The phone defaults to charge-only mode via USB, which prohibits file transfer; this is why the device folder was empty in Windows. Switch to MTP mode via the notification shade and it will appear as it normally does.
In addition, in Developer options, you can configure the default USB mode, so as to prevent this from happening in the future.
Click to expand...
Click to collapse
This fixed my Issue. It was set to MTP but I switched it to Charge only then back to MTP and it works now.
Thank you.
with a fast wifi connection, its not really much slower to transfer big stuff as well; although, how often are you transferring 20-30 gigs of stuff???
I think I have used the cable to transfer maybe 3 or 4 times since I got this phone..wireless charging, no cables to transfer files, its time to embrace 2015!
TWRP Resize partition function
Addressing just the problem posed in the title of this thread, if you have TWRP installed, or if you choose to install it after you discover this problem, then you have an option that will preserve your data: use the new "resize partition" function within recovery.
Boot to TWRP (version 2.8.7.1 or higher)
Choose "Wipe" button (do not slide yet!!) then "Advanced Wipe" button.
Select the Data partition, then "Repair or Change File System" button.
Choose the Resize button.
Now you can slide to confirm, and it will expand the partition to it's full potential, without disturbing the data.
danieljw said:
Yes. The phone defaults to charge-only mode via USB, which prohibits file transfer; this is why the device folder was empty in Windows. Switch to MTP mode via the notification shade and it will appear as it normally does.
In addition, in Developer options, you can configure the default USB mode, so as to prevent this from happening in the future.
Click to expand...
Click to collapse
Sorry for OT:
Definitely doesn't work on a rooted Nexus 5. It always jumps back to charge only. Does this work 100% on Nexus 6 devices?
File transfer also doesn't work properly for me (and at least one other person in the NExus 5 Troubleshooting subforums), if you want to move a folder onto the SD card which has a system file and / or subfolders in it, it will most likely fail. There are also a lot of folders not showing in Windows Explorer, so if i.e. I want to move Titanium Backup files to the SD card I just can't place a folder and name it "Titanium Backup" because it won't get recognized. I have to create a dummy folder, place the backup files in there and then move them manually with ES File Explorer to the now visibile real TB folder.
That bothered me so much I did a rollback to Lollipop, hopefully those things get fixed by Google or with an Xposed module (if this is working somewhen).

Cant write to storage via MTP (Or any other mode) from Windows 10 to OP3T

--- SOLVED see first post second page! ---
Hello XDA,
I am only able to read data on the phone when connected via USB on windows. On the phone itself I can change whatever I want ( Via ES-explorer for example) But in windows file explorer I can't. It will not tell me that I do not have proper writing rights, but instead just decides to freeze for 10 minutes everytime I try to make a file change, to eventually give me a beautiful
"windows explorer is not responding" pop-up
What I have tried :
-Rebooting,
-Reinstalling USB drivers,
-Switching USB debugging on and off,
-Reinstalling root,
-Installing the newest Oxygen OS update from February,
-used different cables (also an old micro USB with adapter) And nothing works.
This sucks because I was just trying to change my photography workflow from being Desktop based to being Android based..
Any suggestions ?
Greetings,
Thijs
www.instagram.com/thi_js
Edits: Clarify issue
i have the same problem be great to find a solution
Did you maybe noticed when this problem occurs to you? I know that one months ago it just did work. Should I reinstall Windows completely?
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
lorfo123 said:
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
Click to expand...
Click to collapse
How should one file a bug-report for windows 10 then, this can't be something that shouldn't keep unnoticed by them.
Did rolling back fix something for you, and how did you do so?
I've checked another Windows 10 computer which hasn't been updated and it recognises my one plus 3T so if you Google / YouTube windows 10 roll back it should work
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
1asbak1 said:
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
Click to expand...
Click to collapse
The only other thing I could suggest is using a virtual machine to run win 7
Did you try back usb ports?. My pc with windows 10 fails with the front ports.
Solution
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
ayush2901 said:
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
Click to expand...
Click to collapse
Which version of TWRP are you running? The thing is that If I afterward can't restore the data via USB haha, then the whole point of backing it up seems invalid
lorfo123 said:
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
Click to expand...
Click to collapse
This actually worked. Wauw.
Had to reboot a view times in order to get it in effect, nonetheless, THANKS let the creativity start again
Really,My A** is burnt while my phone showing messages to update,,, Fiunally donw..Thanks a lot...!!
super it works
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
picollo7 said:
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
Click to expand...
Click to collapse
When you connect the phone to pc do you get a notification on your phone with the USB options?
DirkGently said:
When you connect the phone to pc do you get a notification on your phone with the USB options?
Click to expand...
Click to collapse
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
picollo7 said:
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
Click to expand...
Click to collapse
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
DirkGently said:
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
Click to expand...
Click to collapse
Haha, yeah. Does anyone have links to the drivers that work for them?

Categories

Resources