Database Develop

URGENT Please help:Unable to install Slim ics rom

Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.

try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works

trustsyzaa said:
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
Click to expand...
Click to collapse
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu

darkkid85 said:
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
Click to expand...
Click to collapse
common guys i need assistance here
what is this forum for?

calm down and sorry dude i just woke up about a minute ago
here is a download link for xxjvu> http://www.filefactory.com/file/c306c7d/n/I9000XXJVU_I9000OXAJVU_OXA.rar
and root kernel>http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Faryaab said:
Instructions For Flashing Firmware:
Extract the firmware
Put your device into Download MODE
Start Odin
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
Instructions For Rooting JVU :
Extract the Rooted Kernel
Open Odin
Put your device into Download MODE
Click PDA and select CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
Then finally click START!
Click to expand...
Click to collapse
Credit the download link and installation guide to faryaab and chainfire

When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm

darkkid85 said:
Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
Click to expand...
Click to collapse
Try, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format data data and flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.

beardedwonder said:
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
Click to expand...
Click to collapse
how do you do that? the rom is 1 zip file. do i extract it?

xSamuraix said:
how do you do that? the rom is 1 zip file. do i extract it?
Click to expand...
Click to collapse
Unzip it and then push the file zImage to your phone with Heimdall while in download mode.
On command line, it's:
heimdall flash --kernel zImage
There's probably a way to do it in the GUI, too.

pls...pls...pls...HELP

HI
i downgrade my device from rocket rom ics tu 2.3.6 with pc odin but it stuck on samsung galaxy note n7000 logo...and it goes to downloading and recovery
i test 1000 way but it stuck again ..
.
.
.
BUT when i install a 3 file rom for example la3 it stuck on datafs then i flash a 1 file rom for example la6 it finish completely and it goes to recovery then when i reboot the device the bootanimation playS but doesnt come to rom and when i wipe data/factory rset it stuck on first logo again
EXCUSE ME FOR MY BAD ENGLISH
PLS HELP...HELP...HELP

pls help .....

Try Flashing different ROM. and please mention the procedure u flashing it.

ranjan.alva said:
try flashing different rom. And please mention the procedure u flashing it.
Click to expand...
Click to collapse
i flash other roms but ...

Do u get any errors while flashing GB ROMs??
If could enter Boot animation , you can try
1. Enter recovery mode and "Wipe / Factory Reset "
2. "Wipe cache"
3. Reboot
after this it should boot up normally.

boot into download mode flash rom using pc odin

ranjan.alva said:
do u get any errors while flashing gb roms??
If could enter boot animation , you can try
1. Enter recovery mode and "wipe / factory reset "
2. "wipe cache"
3. Reboot
after this it should boot up normally.
Click to expand...
Click to collapse
richy99 said:
boot into download mode flash rom using pc odin
Click to expand...
Click to collapse
i try but stuck again ...

farzad.u235 said:
i try but stuck again ...
Click to expand...
Click to collapse
Try flashing cf chinese repack then use abyss 3.9 kernel and flash back to gb with full wipe before u flash gb rom if u come from ics u need to flash gb kernel before flashing gb rom
And make sure to reboot recover not phone u will not beable to boot phone just recover into redpill
Sent from my GT-N7000 using XDA Premium HD app

I downgraded from imilka's rom to KK1 like this:
Enter download.
Start PC Odin (DON'T CHANGE ANYTHING).
Connect phone.
Click the PDA button and select .tar file.
Click Start.
Flash finishes.
Phone reboots.
Plays startup animation.
Takes a long time.
Plays startup animation again (bootloop).
Enter recovery (Vol-up+Home+Power).
Wipe data/factory reset.
Wipe cache partition.
Reboot.
That worked for me.
If it doesn't work, you could try to flash imilka's 4.0.3 rom and do the above procedure.
Best of luck!
Daan

farzad.u235 said:
i try but stuck again ...
Click to expand...
Click to collapse
Flash any CF Kernel using PC Odin and get CWM
then copy any custom ROM to ext_sd card
boot into CWM recovery
flash Custom ROM

Did you make a nandroid backup? Its much easier if you did make one.
Sent from my iphone 4s jailbreak and rooted to run android OS

DaanJordaan said:
I downgraded from imilka's rom to KK1 like this:
Enter download.
Start PC Odin (DON'T CHANGE ANYTHING).
Connect phone.
Click the PDA button and select .tar file.
Click Start.
Flash finishes.
Phone reboots.
Plays startup animation.
Takes a long time.
Plays startup animation again (bootloop).
Enter recovery (Vol-up+Home+Power).
Wipe data/factory reset.
Wipe cache partition.
Reboot.
That worked for me.
If it doesn't work, you could try to flash imilka's 4.0.3 rom and do the above procedure.
Best of luck!
Daan
Click to expand...
Click to collapse
which kk1?
please give me a link
thanks

farzad.u235 said:
which kk1?
please give me a link
thanks
Click to expand...
Click to collapse
in android development for note there is a post from Dr. Keatan with all the stock rom
there you can find kk1 i imagine

farzad.u235 said:
which kk1?
please give me a link
thanks
Click to expand...
Click to collapse
KK1 is a dutch rom I don't know if you wan't to use it.
I used it as it's directly rootable and I'm dutch.
edit: and it immediately said there was a software update.

i try your ways but stuck again ...

another way?

try doing this:
1. Go to recovery
2. Flash Abyss 3.9 kernel or any Abyss kernel with NO touch redpill recovery
3. Then go to advanced Reboot recovery
4. flash a zip file (custom roms)
5. Reboot

see my signature

i try all he ways that you say but ...
another way?
thanks for your answers

farzad.u235 said:
i try all he ways that you say but ...
another way?
thanks for your answers
Click to expand...
Click to collapse
Do u have cwm or is it stock recovery
Sent from my GT-N7000 using XDA Premium HD app

[Q] Bootloop after flashing ROM with CWM and I don't understand why

Hi
I'm having a problem with the i9000
this is how the phone was before:
rooted stock firmware (2.3.3) with Galaxian Kernel (used ODIN to install that)
then I downloaded ROM Manager and used that to flash the latest CWM
next: rebooted to recovery, made a nandroid backup and flashed AOKP milestone 4 and GAPPS
when I rebooted it got into bootloop: boot logo, cyanogenmod logo, black screen with white text and reboot
then I tried to restore the nandroid backup (can still get into CWM)
now it's stuck at Loading kernel...
I can still get into CWM. Can somebody tell me what I did wrong and how I should fix this?

Boot to cwm, FLASH kernel with ICS support like - Semaphore. Reflash ROM, if still in boot loop flash kernel again ;-). It should work ;-)

NoXiScz said:
Boot to cwm, FLASH kernel with ICS support like - Semaphore. Reflash ROM, if still in boot loop flash kernel again ;-). It should work ;-)
Click to expand...
Click to collapse
Did that, but instead of booting the ROM it immediately boots to recovery. Flashed the kernel with ODIN and the ROM with CWM

Flash the kernel via CWM, the semaphore!! not the galaxian, the galaxian is for 2.3.3!

NoXiScz said:
Flash the kernel via CWM, the semaphore!! not the galaxian, the galaxian is for 2.3.3!
Click to expand...
Click to collapse
yes, working with the semaphore now
but it should be flashed with CWM, not ODIN?

Okey, try to flash the ROM again, than again the kernel ;-) Everything via CWM, i think ODIN is bit risky to use, cause of possible USB fail ;-) (sorry for slover responses i don't have verified account )

NoXiScz said:
Okey, try to flash the ROM again, than again the kernel ;-) Everything via CWM, i think ODIN is bit risky to use, cause of possible USB fail ;-) (sorry for slover responses i don't have verified account )
Click to expand...
Click to collapse
it's working

You are welcome buddy, remmeber if you have access to CWM don't use odin ;-)
Oh and BTW i hope, that you did not forget to wipe - data,cache and dalvik cache?

NoXiScz said:
You are welcome buddy, remmeber if you have access to CWM don't use odin ;-)
Oh and BTW i hope, that you did not forget to wipe - data,cache and dalvik cache?
Click to expand...
Click to collapse
No no, I know about that This is not my phone. I have a Nexus S, Asus Slider and X10 Mini Pro, I flashed over 100 ROMs and kernels
it was just the first one from Samsung

ahh right, hell of a job to flash a different phone than yours. (yestarday was flashing my GFs x10i, spend the whole f**** day doing it.... and still she gets like 5 WLODS per day...)

NoXiScz said:
ahh right, hell of a job to flash a different phone than yours. (yestarday was flashing my GFs x10i, spend the whole f**** day doing it.... and still she gets like 5 WLODS per day...)
Click to expand...
Click to collapse
only phones that are easy to flash are Nexus devices and maybe an unlocked HTC

Flashed safe kernel, cant boot.

i was using official samsung ICS 4.0.4.. but i wanted cm9/cm10..
i flashed safe kernel. now i can get into CWMR.
i wiped data/factory reset. then tried to flash zip from sd card.
thing is, i forgot to put cm9 n gapps in the phone memory. so i put the files in external sd but now i cant access external sd card as well.
how can i flash custom rom? i cant access phone memory to put them in.
i cant even boot to the official ICS 4.0.4 anymore..
guys please help! thanks!:crying:

ethanmars said:
i was using official samsung ICS 4.0.4.. but i wanted cm9/cm10..
i flashed safe kernel. now i can get into CWMR.
i wiped data/factory reset. then tried to flash zip from sd card.
thing is, i forgot to put cm9 n gapps in the phone memory. so i put the files in external sd but now i cant access external sd card as well.
how can i flash custom rom? i cant access phone memory to put them in.
i cant even boot to the official ICS 4.0.4 anymore..
guys please help! thanks!:crying:
Click to expand...
Click to collapse
curious.. what safe kernel did you use?...if you wipe data/factory reset from a safe kernel it will boot fine..

cm9 safe kernel.. thats what i thought. i've flashed 2 galaxy note this way before. it was all a success. from official ics to safe kernel to cwmr to cm9 n gapps..
pls help me out here.. im so scared! sigh..

ethanmars said:
cm9 safe kernel.. thats what i thought. i've flashed 2 galaxy note this way before. it was all a success. from official ics to safe kernel to cwmr to cm9 n gapps..
pls help me out here.. im so scared! sigh..
Click to expand...
Click to collapse
i think CM9 safe kernel is for CM not TW..
if you can go to download mode ... flash GB rom via PC Odin.. here
http://forum.xda-developers.com/showthread.php?t=1424997

alucard8888 said:
i think CM9 safe kernel is for CM not TW..
if you can go to download mode ... flash GB rom via PC Odin.. here
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
thanks! but is it possible if i can just flash a kernel for tw (tw is touch wiz rite?) so that i can boot the phone n place the zips in the phone memory?
if so, which one of the tw kernel should i be using? i will need to flash them using pc odin using the pda tab rite?
thanks man

Try aroma file manager, you can access file manager from rcovery and try moving file to desired location.
OR flash hydrakernel, which is universal, which can boot your device.

ethanmars said:
thanks! but is it possible if i can just flash a kernel for tw (tw is touch wiz rite?) so that i can boot the phone n place the zips in the phone memory?
if so, which one of the tw kernel should i be using? i will need to flash them using pc odin using the pda tab rite?
thanks man
Click to expand...
Click to collapse
Speedmod or Hydracore kernel (tar file)... http://forum.xda-developers.com/showthread.php?t=1789397

dr.ketan said:
Try aroma file manager, you can access file manager from rcovery and try moving file to desired location.
OR flash hydrakernel, which is universal, which can boot your device.
Click to expand...
Click to collapse
Its booting! oh thank god! guys, thanks so much!
every flash you will learn something new i guess eh.. haha :victory:

[SOLVED] no Boot after semaphore 3.3.0s (cm10.2nightly)

I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
Hello,
i am not able to ask in semaphore channel...so i want to ask you.
I falshed latest cm10.2 nightly, semaphore 3.3.0s and last but not least the hugemem libs via CWM.
after this my phone stucked on boot. Maybe you know the problem?
Many thanks in advance!!
Lordlambda
Click to expand...
Click to collapse
hugemem libs are not required, so the problem has nothing to do with hugemem libs (you only won't be able to record 720p video), but the fact you are stuck on boot maybe connected with something else ... from what firmware you were flashing? can you describe me your whole procedure (or just try to simply flash CM several times until it will boot and then reboot and instal semaphore ...)
Click to expand...
Click to collapse
I was on cm 10.2 (5.12.) and on kernel 3.3.0. Then i wanted to test the 3.3.0s kernel. so i downloaded it, go to recovery and flashed itvia cwm (Kernel is on external SD). There are no problems with the "normal" kernal version. Only by flashing the "s" my phone stuck on boot. In addition, i clean dalvik and normal cache.
And ofcause, i want to flash hugemem libs if the "s" version will boot normaly.
Many Thanks!
Click to expand...
Click to collapse
Strange, maybe try to reflash from internal storage (u can use file manager in cwm, or mount the phone to pc over usb from recovery to upload the files) and make sure you have the right files (as flashing CM11 accidentally with recovery from semaphore 3.3.0 will not boot). I recommend to redownload carefully both files, place on internal and reflash ... should be fine then.
Click to expand...
Click to collapse
My phone can boot, i falshed 3.3.0.tar via odin....thats not the problem. but i try to flash 3.3.0.s from internal storage. Maybe i have to mound or cleare something more than dalvik and normal cache? mound the sd?
Many Tanks!
Click to expand...
Click to collapse
no ... leave everything default in recovery ... so maybe try flashing 3.3.0s via odin too??? there should be no problem switching between standard and "s" kernel ... make sure you have the same size and MD5 version as in the semaphore topic ...
Click to expand...
Click to collapse
I checkes md5 summ....if i flash 3.3.0s via Odin phone starts but in Nest restart i stuck in Boot too.(in sumsung s screen, cant geht to recovery) same behavior AS after flashing "s" in cwm.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
So try to flash CM only .. boot with CM ... remove semaphore app, then reboot to cwm, install "s" version, turn off the phone (dont reboot system from cwm), boot to recovery adn reflash "s" version again, reboot system, instal semaphore app ...
Click to expand...
Click to collapse
I will give it a try after visiting my dentist. Thank you!
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
np, until I will have ideas I'd like to help
Click to expand...
Click to collapse
install cm10.2, deinstall semaphore app, insatll 3.3.0.s, turn off phone---no chance to get back in cwm
Click to expand...
Click to collapse
strange ... can you send me the locations were you downloaded the 3.3.0s (link to the file)
Click to expand...
Click to collapse
http://78.46.194.137/kernels/Semaphore_JB_3.3.0s.zip
Click to expand...
Click to collapse
sorry, I can't help you more, better to ask in the thread ... as it must be something else in your phone .... or if you don't mind loosing all your data I would recommend to go through odin from stock samsung, just to be sure (that is what I will do in this situation ... complete reinstalation ...) - it will take no more than 30 minutes to get back to stock and back to CM10.2
Click to expand...
Click to collapse
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!

Thanks for the info ...but it is strange ...in my 10.2-time i flashed Sema-Kernel only via Odin and it was never a problem ...
Amazing technology sometimes it works perfect and sometimes it doesn`t ...
Good to hear that it works now ...
lordlambda said:
I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!
Click to expand...
Click to collapse