Related
So i have seen many guys charging a good amount of money for this, DFS is charging like 50$ per phone. Many guys are struggling to get thr phone working since they are unable to flash Akey/SPC which is needed for some carriers like Reliance, TATA in India atleast.
I'm not going to put usual diag setup stuff right now, or may not able to update it at all.
The below commands should be sent step by step as mentioned through DFS or CDMA workshop or any other tools which you prefer to use. Also you need to first send the 16 digit password for your phone model. I believe for L720 it is "2012112120131219"
----To change SPC to 000000 or any anything
00
4B13030000000000
4B130F006E766D2F6E756D2F383500
4B1308006E766D2F6E756D2F383500
4B13020041020000B60100006E766D2F6E756D2F383500
4B1305000000000000000000303030303030
4B13030000000000
Click to expand...
Click to collapse
In the second last line i.e. "4B1305000000000000000000303030303030", the last 12 digits are your SPC hex value, if you want to change it to anything else like 123456, you need to edit the last 12 digits and make it look like "4B1305000000000000000000313233343536"
----To change the A-Key to anything, in the below case, akey decimal to be flashed is 11111111133333333785 (the akey hex will be: 9A3298B4E238A719)
00
4B13030000000000
4B130F006E766D2F6E756D2F323500
4B1308006E766D2F6E756D2F323500
4B13020041020000B60100006E766D2F6E756D2F323500
4B130500000000000000000019A738E2B498329A
4B13030000000000
Click to expand...
Click to collapse
In the above cmds, if you take a close look at the last 16 characters in the 2nd last line and the mentioned akey hex, you maybe observe that the akey hex in the cmd is in a reverse manner. You can change generate your akey online or via regular tools like DFS and arrange it in the similar manner to flash. You might need to downgrade your modem in order to get this working, please post here if it works without downgrading the modem.
This has been tested on 2xGalaxy Victory and one Sprint L720, so please test and report if this works for you.
funkym0nk3y said:
Mods
if this has been posted in wrong section, then please pardon my ignorance and kindly move it to appropriate section.
Click to expand...
Click to collapse
Good write up. I flash phones and make tutorials. Some people on here claim they can do this and do that but, haven't written a clear guide yet on how to do it. Lol But, my guides are free and to the public.
Also this should be in the general section. Development is only for roms, etc.
as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing
PapaDocta said:
as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing
Click to expand...
Click to collapse
If you dont mind someone asking, how do you downgrade the modem? I tried to downgrade the complete os from samsung-udpates but nothing has worked for me.... any other suggestions??? thx in advance
to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems
PapaDocta said:
to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems
Click to expand...
Click to collapse
I actually tried that and still nothing! Maybe i just have a phone that wont take....? I have tried several os downgrades and last resort was the modem downgrade and still the same result: UNABLE TO USE THE 16 DIGIT PASSWORD TO ACCEPT ON WORKSHOP.....
I appreciate your input and help brother thx again.
If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.
slawson said:
If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.
Click to expand...
Click to collapse
TKS BRO
Thank you this is the only thing i have seen that has actually had some success, at least i did not get any errors but how do i know if the akey is in if i press read i just get a lot of cps errors. DOes the trial version of dfs not let you do anything in the cave ?
anyway thanks again hopefully this works.
Many parameters on a number of phones are write only, so you won't be able to read them.
flashing rom fear
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
To answer my own question since nobody else did
Dont worry i just installed the one click mf9 rom and am now free of nags for reboot and the annoying register phone on sprint. very happy with the phone and its performance, blows my old epic out the water.
Hi,
did anyone try to change the akey for Sprint Note 3... ? N900P
thanks in advance...
Add to my Framily!!!!
A00275186Ak
Thank You!
jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
Using cwm to flash another rom
Sent from my SPH-L720 using XDA Premium 4 mobile app
I have a Sprint SPH-L720. I tired to use the command 4B1305000000000000000000303030303030 it accepts it but responds back with a differnt command and the SPC doesn't change.
I did downgrade the baseband to both MDC and MDL with it still not working.
Any ideas how to change the SPC to 000000?
Been awhile but I thought I posted an update. Downgraded to the MDC modem and tired again and it solved my problem.
Thank you for the awesome post.
Using the command
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?
Okijaamaka said:
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?
Click to expand...
Click to collapse
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.
rizapn said:
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.
Click to expand...
Click to collapse
i have DFS but do you have step by step on how to connect it?
please. want to change my spc to 000000
I did something silly and now my phone is in Qualcom dowoad mode.
I believe this is called a hard brick.
I believe I can flash firmware using the QPST tool ... does anybody have any images in hex that can be used in the tool?
Thanks
Carl.
No. You need JTAG ..
SaHiLzZ said:
No. You need JTAG ..
Click to expand...
Click to collapse
Do you know this for a FACT (experience) or are you speaking with read knowledge from the forum?
I don't mean to offend you BUT it has to be possible to rip the images required from the phone itself.
Qualcomm is used in lot of newer Samsung HTC and other devices. Look up any other device to find your answer.
SaHiLzZ said:
Qualcomm is used in lot of newer Samsung HTC and other devices. Look up any other device to find your answer.
Click to expand...
Click to collapse
I did look around the other forums, it seems to me that it can be done. It hasn't yet been done, that doesn't mean it can't.
I posted here to see if somebody had the images.
carlsanderson1986 said:
I believe I can flash firmware using the QPST tool ... does anybody have any images in hex that can be used in the tool?
Click to expand...
Click to collapse
Are you s-off? I don't think qpst will help if s-on, although I see an SB3.0 tab in latest qpst which may be of interest.
Here is latest QPST (2.7.402) I could find: http://forum.xda-developers.com/showthread.php?t=2020275
I would like to figure this out as well. I suspect it must be possible, since I don't think HTC would have planned to open the One for JTAG.
Here is some info on the xml formatting: http://forum.xda-developers.com/showthread.php?t=2208289
Still need to figure out which data/partitions to extract from healthy htc one to create mbn files (bin files).
Here is a thread with some qpst discussion related to htc one: http://forum.xda-developers.com/showthread.php?t=2467960
Research...
I've been researching... If there's a dev who already knows this stuff and can help out, would be much appreciated.
Here are my findings so far:
http://forum.xda-developers.com/showthread.php?t=1914359 <-- very interesting journey by dev, trying to unbrick galaxy note one with qpst
http://forum.xda-developers.com/showthread.php?t=2208289
http://forum.xda-developers.com/showthread.php?t=2136738
#Tool called MiFlash, taiwanese "brush" method for low level resetting devices
#uses qualcomm serial drivers/apis, looks similar to what qpst does
#the files provided for use with MiFlash can be used as examples for qpst
#perhaps the tool itself can be repurposed?
http://tw.miui.com/thread-3230-1-1.html <--translate with google
http://en.miui.com/thread-1885-1-1.html
http://en.miui.com/thread-1689-1-1.html
http://en.miui.com/download-111.html
http://xiaomi.eu/community/threads/guide-flashing-rom-using-miflash.19287/
#Random QPST usage information
http://www.anyclub.org/2012/05/how-to-generate-8660msimagembn.html
http://www.anyclub.org/2012/04/how-to-build-emmc-flash-programmer.html
http://blog.csdn.net/su_ky/article/details/7773273
https://github.com/jcsullins/qdloader/blob/master/qdload.pl
Been reading a few things about unbricking S3 and qualcomm based devices.. Some interesting read here: http://forum.xda-developers.com/showthread.php?t=2345860
HTC One Bootloader: http://forum.xda-developers.com/showthread.php?p=45402164#post45402164
HTC EVO Unbricking project: http://forum.xda-developers.com/showthread.php?t=1948485
These are just morsels of information I have collected but in theory: If you can get a working Hboot (or ENG Hboot?) on an sdcard and get the phone to read it your phone should boot back up. Assuming your device was S-OFF before any of this happened.
Let me know if any of this makes sense..
Q&A for [TOT][RESTORE] LG LS991 ZV5 TOT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOT][RESTORE] LG LS991 ZV5 TOT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Stuck on Setup after TOT Restore for the Sprint LG G4
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Stuck_On_Setup said:
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Click to expand...
Click to collapse
Possibly try restoring again?
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
ironbesterer said:
Possibly try restoring again?
Click to expand...
Click to collapse
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Stuck_On_Setup said:
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Click to expand...
Click to collapse
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
ijball said:
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
Click to expand...
Click to collapse
Are you also stuck trying to get past the "Set Internet Connection"
Thanks A lot GOD BLESS YOU
I have this same issue 2 g4 on bootloop one i was flashed to verizon kdz I will try to flash sprint rooted system img and then flash tot file and let you know
Any way very thanx to you
You are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please upload those to .db extensions files and try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
Thanx in advance
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Very Very thanx to you
you are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please those to .db extensions files and upload it to try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
By pass DLL
I had the same problem and can fix it, you have to download this file and put it in the DLL option in LG Flash Tool, with TOT Sprint.
http://www.mediafire.com/download/jdlyk28pygp1idj/dll+mod.dll
Stuck_On_Setup said:
Are you also stuck trying to get past the "Set Internet Connection"
Click to expand...
Click to collapse
I'm not encountering that error but I keep getting "DoDownload Error!!!". When given the choice for DBMS, I tried both Korea one, and the Global one. I've read that I shouldn't be getting that prompt in the first place.
LG G4 LS991 Factory reset status 2.
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
try board DL mode, instead upgrade dL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
ijball said:
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
If it flash pass 80% and phone reboot then you are good. Glad it work for you
ijball said:
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
Click to expand...
Click to collapse
cudos01 said:
If it flash pass 80% and phone reboot then you are good. Glad it work for you
Click to expand...
Click to collapse
Thanks, btw for those that tried this method. Is /carriers/app still in your phone? I can only find an empty /carrier directory.
EDIT: NVM, I tried inserting my non US GSM SIM and it's already being recognized. Will try if I'll have data.
EDIT2: Data is now working. I'm outside US.
Select Board DL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
For this problem you have to select the Board DL in LG Flash Tool
flash tot problem ls991
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Try board DL mode, instead of Upgrade Mode. Good luck
bryan4mer said:
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
its working , thanks a lot....
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
An3ru said:
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
Click to expand...
Click to collapse
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
raptorddd said:
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
Click to expand...
Click to collapse
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
An3ru said:
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
Click to expand...
Click to collapse
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
An3ru said:
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
Click to expand...
Click to collapse
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
raptorddd said:
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
Click to expand...
Click to collapse
Ok, but i might not be able to return it since its past the year. And with LGup I open the software and states that MODEL "unknown" and gets the COM port and the software im runing in a small window. Is there any fix for it, that you know of?.
An3ru said:
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
Click to expand...
Click to collapse
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
raptorddd said:
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
Click to expand...
Click to collapse
I have it, but I attempt to flash it with lgflashtools and still stuck at 9%. Also tried LGup, and still im unable to do anything with that program
So this is not my work but it works for cricket stylo 2
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Gives you the basics
Get lg up version------------------------------------LGUP_1.14.0.3 Can be downloaded at
https://mega.nz/#!x9YTHITI!kg4_zZLubILUywZKri5HgWDlUUUsP_z8OcOmNw6oEos
Get common dll msi---------------------------------------LGUP_Common_DLL_Ver_1_0_28_5 Can be downloaded at
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
The lgup patch and thank this man here.....
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
And lastly we need the 8994 dll here-------------------
https://mega.nz/#!VhpDxKoI!Mo0LcQOVOjcM337Vs2X87KoEMvE3HApYgpFNMYEl4XU
So install lgup and all the .dlls
and open the patch and navigate it to wherever LGup is installed......
Run the patch.....
And like the thread says Profit.......
But I am in the process of dumping my k540 rite now.....
There is currently no way to flash dump partitions back.... As LGup crashes.....
Also the dump files are in a com# format to even think about using them they need to be in a .MBN format
But its a start boys and girls.....
Also as a side note Be carefule as this can brick your device if you go flashing PRLs and chip erases and such....
Some assistance is needed.
TheMadScientist said:
So this is not my work but it works for cricket stylo 2
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Gives you the basics
Get lg up version------------------------------------LGUP_1.14.0.3 Can be downloaded at
https://mega.nz/#!x9YTHITI!kg4_zZLubILUywZKri5HgWDlUUUsP_z8OcOmNw6oEos
Get common dll msi---------------------------------------LGUP_Common_DLL_Ver_1_0_28_5 Can be downloaded at
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
The lgup patch and thank this man here.....
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
And lastly we need the 8994 dll here-------------------
https://mega.nz/#!VhpDxKoI!Mo0LcQOVOjcM337Vs2X87KoEMvE3HApYgpFNMYEl4XU
So install lgup and all the .dlls
and open the patch and navigate it to wherever LGup is installed......
Run the patch.....
And like the thread says Profit.......
But I am in the process of dumping my k540 rite now.....
There is currently no way to flash dump partitions back.... As LGup crashes.....
Also the dump files are in a com# format to even think about using them they need to be in a .MBN format
But its a start boys and girls.....
Also as a side note Be careful as this can brick your device if you go flashing PRLs and chip erases and such....
Click to expand...
Click to collapse
Hey, how do you get this to work? I've installed everything as indicated and the tool shows my LG-K450 (Cricket) phone as an unknown model so it wont let me proceed.
Did you run the patch and junk
hugoBOSS1981 said:
Hey, how do you get this to work? I've installed everything as indicated and the tool shows my LG-K450 (Cricket) phone as an unknown model so it wont let me proceed.
Click to expand...
Click to collapse
Get uppercut and lgup 1.4 it will find your phone and allow u to flash kdz and tots