Database Develop

[DEV] ALL in ONE for Galaxy Note N7000 (BLN,CRT-ON/OFF, PowerMenu,and more)update

Hi world
here it is for N7000
All the development to make your note more usable
I made also a varity of choices for u
flash Homam's files via RECOVERY and enjoy
u must be on deodexed ROM and always make nandroid backup befor using any file
I am not responsible of any damage that caused by any of my files
---------------------------------------------------------
*Extended Power Menu
- Deodexed KKA ROM**
http://www.multiupload.com/VYU3UXRHP4
-Deodexed KKA ROM with SMS-BLN support, CRT-ON/OFF, %battery and ICS menu animation**
http://www.multiupload.com/CQA6VKA8MV
-Deodexed KL3 ROM with SMS-BLN support, CRT-ON/OFF**
http://www.multiupload.com/RX9JSCMNC8
***********************************************************
*Remove SMS from CallLog (social hub fixed)
- Deodexed KKA ROM**
http://www.multiupload.com/N4IKCQJLXE
***********************************************************
bLED MODE: (for all ROMs till KL3)
http://forum.xda-developers.com/attachment.php?attachmentid=815064&stc=1&d=1323785313
***********************************************************
Phone.apk noise suppression disabled by default & no ascending ringtone
KL3
http://forum.xda-developers.com/attachment.php?attachmentid=822212&d=1324314013
***********************************************************
This is how to delete Yellow Triangle from the boot image which appears due to flashing custom Kernel via ODIN
follow the steps below:
*download this APK into your device and install it as any application
http://www.multiupload.com/BL9BNEXB7K
*Start the app and choose "Dump current kernel to SDcard
*Reboot into DOWNLOAD mode
*Download the stock kernel which match your ROM only
-KL3
http://www.multiupload.com/LXIXMBHIWT
*Flash the stock kernel via ODIN
*After rebooting go back to the same application that we used it to dump the kernel
*Choose "Flash kernel from SDcard"
*Reboot
*You are done
***********************************************************
I am glad for any donation u make which will support me to provide more
and nothing bad will happen if u press THANKS BUTTON before DOWNLOAD link
credit as always to me
***********************************************************
Thanks Menu
@Brightidea (my teacher)
@Heliccant (Ktool)
@watch_mania (bLED mode)
@MoWeb (Phone noise suppression disable & no ascending ringtone)
***********************************************************
Homam,,

reserved for future dev

first...... Thanks a lot...

How do you know if you have a deodexed rom? I'm on stock kka with cfroot and cwm
Sorry for being a noob lol

Really Big News for note users.
Tried the power menu mod
Works great....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk

nuclearmonkeyuk said:
How do you know if you have a deodexed rom? I'm on stock kka with cfroot and cwm
Sorry for being a noob lol
Click to expand...
Click to collapse
Stock rom isn't deodexed.
Sent from my GT-N7000 using xda premium

drgopoos said:
Really Big News for note users.
Tried the power menu mod
Works great.... View attachment 819363
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Much better if the icons are modified as well to corresponds default icons...

Any chance of getting the crt on/off animation but without the battery mod? I hate that thing.

Thank u mister.Very usefull!
Can u please make these modes compatible with the latest official filmaware XXKL3?

thanks for the lovely mod. works flawlessly

drgopoos said:
Really Big News for note users.
Tried the power menu mod
Works great.... View attachment 819363
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
i confirm..
it works great..btw i have KK9

Ok so i'm on Rocket ROM v8 based on KKA and when ever i try and flash in recovery i get a syslink error
Any ideas?
Edit: Forget that phone has rebooted with everything working lol.. confused

Nice Thread !
But could you Add the bLED Notification MOD ?
We could make this whole thread a collection of the greatest mods but bLED is missing, i think it it awesome
Maybe also those Thunderbolt-Tuneups

Do we have some for the new KL3?

i need KL3 dump files ,,, someone upload it plz

Homam Ageel said:
i need KL3 dump files ,,, someone upload it plz
Click to expand...
Click to collapse
which files you need?
the dump is very big and takes a long time for the up
alternatively you can download this:
http://forum.xda-developers.com/showthread.php?t=1393979
is like the stock but deodexed

alesscam said:
which files you need?
the dump is very big and takes a long time for the up
alternatively you can download this:
http://forum.xda-developers.com/showthread.php?t=1393979
is like the stock but deodexed
Click to expand...
Click to collapse
that is much better
i will make the modification on the new files and upload soon

Thanks Man...

Seeing as you have not provided any documentation as to what initiates you took to enable CRT on here, I read your SGS 2 threat and presume its in the services.jar.
I have a modded rom already on deoxed KK1 and have no desire to install a totally new framework.
So should it be ok to just replace the services.jar on my system to enable crt-on animation?

cybermessiah said:
Seeing as you have not provided any documentation as to what initiates you took to enable CRT on here, I read your SGS 2 threat and presume its in the services.jar.
I have a modded rom already on deoxed KK1 and have no desire to install a totally new framework.
So should it be ok to just replace the services.jar on my system to enable crt-on animation?
Click to expand...
Click to collapse
It should work..
make nandroid backup just un case

[ROM]Stock Firmware N7000XXLA1/LA3/LA4 [one file-odex-save root]

Stock Firmware N7000XXLA1/LA3 (2.3.6) Open Europe
Repacked the three firmware file into one (odexed, file extension .tar)
Stock Firmware (no wipe) N7000XXLA4 (2.3.6 one file, odexed) Open Germany
Warning! Firmware deletes all data and settings!
ROM established with FULL WIPE
You need to have the root right
Installation by means of MobileODINPro https://market.android.com/details?id=eu.chainfire.mobileodin.pro&feature=search_result#?t=W251bGwsMSwxLDEsImV1LmNoYWluZmlyZS5tb2JpbGVvZGluLnBybyJd
(If you do not have root rights and you want to leave the counter "0" and no yellow triangle,
flash the first stock firmware is not above KKA and get root in this way selecting the method 2 http://forum.xda-developers.com/showthread.php?t=1329360
and then it flashed this ROM.)
Installation :
0. Save all the necessary applications to the previous your firmware, using Titanium Backup.apk
1. Download and put repacked Firmware N7000XX***_N7000OXA***_N7000XX***.tar
and root kernel CF-Root-***-v5.0.tar оn the internal flash drive.
2. Install MobileODINPro_v1.25 (Update plug-ins) then open it.
3. Press "Open file" choose at the top N7000XX***_N7000OXA***_N7000XX***.tar
4. Press "KERNEL" specify the path to root kernel CF-Root-***v5.0.tar
5. Deselect "Enabl EverRoot"
6. Press "flash firmware" (further "ok...")
Wait about 5 minutes...
Castom binary "no"! No Yellow triangle! Have root right!
And so the same program will install : SU v3.5, CWM recovery 5.0.2.7, CWM manager v3.
My feeling with the kernel CF-Root-***-v5.0 running smoothly.
I installed repacked N7000XX***_N7000OXA***_N7000XX***.tar on top of CheckROM™ Revo NoteHD. Everything went without a glitch
Watch my video (for example KL7) : youtube
----------------------------------------------------------------------
Download CF-Root-v5.0.tar (LA1/LA3/LA4/LA6): http://forum.xda-developers.com/showpost.php?p=20724234&postcount=5
Download firmware (without wipe) :
N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar (838 mb): narod
(md5 : 6FF105D6BC3E7EA86A2FEE7A3458BE2A)
Download repacked firmware (with full wipe) :
N7000XXLA3_N7000OXALA3_N7000XXLA3.tar (839 mb): narod
(md5 : 7c6c4f0bf91e58f49809b6090cdd980f)
---------------------------------------------------------------------
Download repacked firmware (with full wipe)
N7000XXLA1_N7000OXALA1_N7000XXLA1.tar (839 mb): narod
(md5 : 53b19e2d292a56db5ffdad02b7ea101f)
---------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Test "AnTuTu" set the default kernel CF-Root-LA1
"Quadrant" set the default kernel CF-Root-LA3 :
Many thanks for the kernel :
Chainfire
----------------------------------------------------------------------
Modest battery in increments of 1% (сharge too, in increments of 1%)
Battery mod for stock KL7/KL8/LA1/LA3/LA4/LA6 : http://forum.xda-developers.com/showthread.php?t=1415567
----------------------------------------------------------------------
Sorry for my english...

I already have CF Root + CWM for KL3 . Meanwhile I have also installed Mobile Odin Pro on my Note. What is the best way of updating to LA1 ? And will I lose the CF Root after flashing LA1 ?
Could you also guide how to Flash LA1 with CWM manager app from Chainfire , as suggested by you earlier . Abd after doing that , will I retain Cf root + Cwm app ?

indiandroid said:
I already have CF Root + CWM for KL3 . Meanwhile I have also installed Mobile Odin Pro on my Note. What is the best way of updating to LA1 ? And will I lose the CF Root after flashing LA1 ?
Click to expand...
Click to collapse
no need to post the same question in different places

indiandroid said:
Could you also guide how to Flash LA1 with CWM manager app from Chainfire , as suggested by you earlier
Click to expand...
Click to collapse
Need to flash the kernel CF-Root-SGN_XX_OXA_LA1-v5.0.
Make it as described in the header

cacagaga said:
Need to wait to make Chainfire root kernel CF-Root-LA1.
Make it as described in the header
Click to expand...
Click to collapse
Thanks but why did you say to Deselect Everoot option in Mobile odin ?
Wont it lead to LA1 firmware minus the Root ?

indiandroid said:
Thanks but why did you say to Deselect Everoot option in Mobile odin ?
Wont it lead to LA1 firmware minus the Root ?
Click to expand...
Click to collapse
Everything will be okay! Root will!
Inside the nucleus CF-Root-SGN_XX_OXA_LA1-v5.0 are all, options in "KERNEL" (see paragraph 4)

Can this be used with AbyssNote 3.0?

Viamonte said:
Can this be used with AbyssNote 3.0?
Click to expand...
Click to collapse
I have not tried.
Can anyone else tried it?
Possible after installation, flash AbyssNote 3.0 through CWM recovery...

pls look @ chef threads!!!

i did the procedure but the baseband wasn't flashed...
Do know why?

zebster said:
i did the procedure but the baseband wasn't flashed...
Do know why?
Click to expand...
Click to collapse
If you did everything correctly, the problem would not have been.
So You make a mistake...

zebster said:
i did the procedure but the baseband wasn't flashed...
Do know why?
Click to expand...
Click to collapse
Same here, still my old baseband.

Added (1-f) stock N7000XXLA3_N7000OXALA3_N7000XXLA3.tar
See cap...

delete this post please...

It would be nice to have also a deodexed and zipaligned version, cacagaga.
Thanks.

Repacked tar links don´t work
Hi cacagaga,
Great work mate but your MultiUpload links DO NOT work. Can you please upload alternative links for your repacked Firmware .tar files
Please, I would really like to install this firmware.
Thanks

Multiupload link = broken!!!

luckyluis said:
Hi cacagaga,
Great work mate but your MultiUpload links DO NOT work. Can you please upload alternative links for your repacked Firmware .tar files
Please, I would really like to install this firmware.
Thanks
Click to expand...
Click to collapse
Changed the link to LA1/LA3 (see cap)
Download LA4 (see cap)

I need a guide to upgrade note

Hi there, there's a friend of mine who want to upgrade from ginger to ics and root too, can someone post a link to a guide step by step? this is a screen of the information if can help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Samsung Galaxy S II using tapatalk

The first step for you is to get root, and the easiest way to do that is to flash one of the pre-rooted stock Roms from here. Use PC Odin.

Rooting Guide
http://forum.xda-developers.com/showthread.php?t=1329360
ICS Stunner Flashing Guide
http://forum.xda-developers.com/showthread.php?t=1552554

so,having already LC1 i have to flash via PC odin the pre-rooted file "3*Files Wipe N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)"
and then follow the guide "ICS Stunner Flashing Guide"?is this all?

uhm?

anto989 said:
so,having already LC1 i have to flash via PC odin the pre-rooted file "3*Files Wipe N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)"
and then follow the guide "ICS Stunner Flashing Guide"?is this all?
Click to expand...
Click to collapse
Yes, that's right. You'll only have to double check if you get CWM Recovery with the pre-rooted Rom. If not, you'll need to flash CF--Root LC1 kernel to get the recovery.
After that, you're set to follow the Stunner flashing instructions.

chasmodo said:
Yes, that's right. You'll only have to double check if you get CWM Recovery with the pre-rooted Rom. If not, you'll need to flash CF--Root LC1 kernel to get the recovery.
After that, you're set to follow the Stunner flashing instructions.
Click to expand...
Click to collapse
I think the latest Stunner could be flashed over a rooted GB kernel(Abyss to be specific), no?
Edit: Confirmed
NEW STEPS BETA 4.3 ONWARDS:
Backup data apps.
Download and copy latest Stunner ROM on your SD Card.
Make sure you are on Rooted ROM. Reboot in recovery.
ONLY IF YOU ARE ON GINGERBREAD: Flash Abyss Kernel. Goto Advanced and Reboot Recovery. Tested and confirmed working on CF-Root Kernel.
Wipe Data (Recommended but not mandatory if you on Stunner ROM already)
Flash ROM.
Flash suitable Modem (Optional, recommended ICS LP5 modem)(not included in ROM)
Reboot and Read Caution.
Do not restore system apps or system data.
Click to expand...
Click to collapse

anilisanil said:
I think the latest Stunner could be flashed over a rooted GB kernel(Abyss to be specific), no?
Edit: Confirmed
Click to expand...
Click to collapse
No, no and no. I tried flashing Stunner directly over rooted GB two days ago, and the end result was no root.
So, rooted GB--> LP1 repack--> Stunner.

chasmodo said:
No, no and no. I tried flashing Stunner directly over rooted GB two days ago, and the end result was no root.
So, rooted GB--> LP1 repack--> Stunner.
Click to expand...
Click to collapse
Do you confirm this procedure?i'm now downloading LC1 pre rooted and ICS stunner...where I find LP1 repack?can you give the link pls?
thanks for all yours patience!

anto989 said:
Do you confirm this procedure?i'm now downloading LC1 pre rooted and ICS stunner...where I find LP1 repack?can you give the link pls?
thanks for all yours patience!
Click to expand...
Click to collapse
LP1 Repack - scroll down the page to find the download links.
And yes, I do confirm what I said earlier.
Rooted GB --> LP1 Repack --> Stunner

[KERNEL][23/04][ICS] LP6 Rooted Kernel

Works on ICS Stunner 1.4.19 (tested) and should work on Touchwiz based ROMs and AOSP based ROMs (ICS Only)
Since I am working on new kernel from source, I decided to give away this LP6 rooted kernel which was planned to be released with ICS Stunner.
I found GPS better on this kernel but this belief can be placebo...
Consist of
CWM
SuperSu (Superuser app)
Init.d support
Rom chefs may need to take care of busybox installation via updater-script. Else users can try to install busybox via Busybox app in the market.
ICS Stunner users shouldn't mind above red line.

Welcome to the Kernel Planet Amigo! Taking everything to the next level!
Thank you for Rooting the LP6 for us bro!!

one word BRAVO!!!

CWM is the real difference here, there was a rooted LP6 kernel floating around (chas found it) but it did not have CWM recovery..
Good job @Neo
Thanks!

Can't wait to give it a spin.

hmmm wonder if this will work with liquidsmooth 2.1

neobuddy89 said:
Topic for LP6 Rooted Kernel. Rooted by me.
Works on ICS Stunner 1.4.19 (tested) and should work on Touchwiz based ROMs and CMv03 by Imilka.
On upcoming version after 1.4.19 -- This kernel may need to be changed bit for make it fully compatible... but that is later part. Since I am working on new kernel from source, I decided to give away this LP6 rooted kernel which was planned to be released with ICS Stunner.
I found GPS better on this kernel but this belief can be placebo...
Uploading in few min.
Consist of
CWM
SuperSu (Superuser app)
Init.d support
Stay tuned.
Click to expand...
Click to collapse
finally we are free from CF "decisions"...
Wonderful !

maxicet said:
finally we are free from CF "decisions"...
Click to expand...
Click to collapse
CF "decisions"???Obviously is good news we can have another guy doing the job but some respect to CF

Ok.. I just dual patched it to work on Stock and AOSP/CM/AOKP further versions.... phew.. now uploading..

Thanks
neobuddy89 said:
Ok.. I just dual patched it to work on Stock and AOSP/CM/AOKP further versions.... phew.. now uploading..
Click to expand...
Click to collapse
My thanks to you

backup/restore are working fine? thx

EdgaBimbam said:
backup/restore are working fine? thx
Click to expand...
Click to collapse
You test it. I never use that options. But if they worked on LP5.. they should work on LP6.
Kernel uploaded.

Man this is awesome and rock solid!! Standing ovation in order!!!
Hats off for this awesome development!!

afilopou said:
CF "decisions"???Obviously is good news we can have another guy doing the job but some respect to CF
Click to expand...
Click to collapse
and where would be the lack of respect?
CF is a GREAT man, but having a different developer capable of injecting CWM in kernel, is a GREAT news....

Thx neo great work.
Gesendet von meinem GT-N7000 mit Tapatalk

Why in zip double folders and files?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

xaoc747 said:
Why in zip double folders and files?
Click to expand...
Click to collapse
Maybe for dual compatibility between stock TouchWiz and AOSP

works fine with TMT1.0....cmw manager shows "various features have been disabled" message, but CWM recovery is present and working..
Nice work mate....

all smooth and nice bro! thanks for the kernel. testing it out

compared to LP5 stock kernal.how is the battery life, i get an easy 5 h screen on with lp5 rom and kernal, fully rooted aswell
Sent from my GT-N7000 using XDA

[Q] Moving from Rooted Stock GB to Custom ROMs Help?

Hi all,
I'm currently on stock Gingerbread, which I have rooted via the ODIN method (I flashed No-Wipe N7000XXLA6_N7000OXEULA1_XEU Europe (03/02/2012) from THIS thread) and would like to move onto installing custom ROMs (namely the ParanoidAndroid ROM)
I was just wondering if someone could provide me with some instructions on how to do it, as the ones in the thread doesn't mention any kernels or moving from stock ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks !

since you are on GB, you may also flash abyssnote42 touch kernel.
you may wish even to stay on that GB rom with that kernel, but from that setup, you can follow the rest of the instructions.

I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Install Rom: http://d-h.st/DtV
Install HYBRID Gapps: http://4ndr01d.com/drcmda/common/
Wipe caches, factory reset is a must if you're coming from another rom than CM9
If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
Reboot and edit your Apps Dpi under Settings/Paranoid Settings/P.A.D. Hold the powerbutton to see the new fullscreen-togglebutton
Click to expand...
Click to collapse
Thanks!

ShahinTehShiz said:
I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Thanks!
Click to expand...
Click to collapse
yes, your right, Because your on GB now you can just flash the abyss kernel and flash the ROM.
as for reverting to stock, When / If the time comes, just download a full firmware package from XDA or Sammobile and flash it using ODIN, that will flash everything back to stock
easy peasy !

That's it guys, I've decided I'm going to go with Franco kernel, from his thread here:
http://forum.xda-developers.com/showthread.php?t=1491428
BUT, I don't understand the instructions when he says
Stock XXLPY/LPF only - confirmed and working
Click to expand...
Click to collapse
Could someone give me instructions on what I would need to do to install his kernel? Thanks!
(Details of my current setup in first post)

If I flashed franco kernel or Speedmod kernel through Mobile ODIN that would be fine right? I don't want any yellow triangle and plan on installing either of the 2 kernels, and then after a while MAYBE install Paranoid Android.
Would that work?
Thanks!

yes, you can use mobile odin to flash kernels
you wont get yellow triangle via mobile odin

Custom Gingerbread ROMs
Hello Friends, I would like to humbly ask what are the various Gingerbread custom ROMs available for the Samsung Galaxy Note GT-N7000?

Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Sent from my GT-N7000 using xda app-developers app

dratif said:
Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Click to expand...
Click to collapse
Thank you for your response, dratif.
The custom ROM you have suggested, is it based on Gingerbread?
Also, what are the other available custom ROMs based on Gingerbread?

Friends, I am currently on a stock Gingerbread ROM and the Android version is 2.3.6
Considering I intend on flashing a custom Gingerbread ROM, should I look at one built only on 2.3.6 or would any custom ROM built on 2.3.x would suffice?