Database Develop

NO FLASH!!!!!!! ICS Full Root Stock kernel LP1 I9220 and N7000

I9220 ICS Stock Kernel v.1.2 (ONLY Chinese leak and derivatives, NOT Europe leak) NO fLASH!!!!
CW version:
ICS stock Kernel I9220 v.1.2
link removed
Odin pc version:
ICS stock Kernel I9220 v.1.2
link removed
-----------------------------------------
N7000 ICS kernel (ONLY Europe leak and derivatives, Not Chinese leak)
CW version:
ICS stock Kernel N7000 v.1.2
link removed
Odin pc version:
ICS stock Kernel N7000 v.1.2
link removed
Changelog 1.2
Auto-full root finally fixed.....
Added ICS Stock kernel LP1 N7000
Changelog 1.1:
Auto-root at each reboot
Tested with rom unrooted
Changelog 1.0:
Added Touch Recovery CW ver. 5.8.1.5
Added Auto full-root and Auto-installation CWManager
Added auto-backup folder EFS (in /data/.Abyss)
Added Battery auto-calibration (you must delete the file /data/.Abyss/calibrata)
init.d scripts support
Added ability to change the bootanimation and the startup sound (in internal usb memory you must create a folder called boot and insert ourselves bootanimation.zip and/or powerOn.wav, then reboot)
Please note:
When you install the fist time the kernel it will run the full installation of the root and CW Manager.
Then, if we want flash again the kernel (after having already installed it the first time), we will have to delete the file /data/test.
Otherwise, auto-root and the installation of CWMManager will not occur
Bug: Usb Storage mount not working in recovery
I am not responsible for damage caused by the kernel
to the device and/or media.
If you encounter problems using this kernel, in what a way, I am not responsible.
You flashed the kernel, it is your responsibility.
EDIT:
The kernel link are removed
Credits:
Samsung
Chainfire
AF974

W O W !!!

Hey...Wellcome...

suppurt zh_TW ???

Amazing thanks angelom

can i install this kernel on ics rocket rom 1.5?

Great Work!
Thanks!

farzad.u235 said:
can i install this kernel on ics rocket rom 1.5?
Click to expand...
Click to collapse
Yes............

Is it OK for midnote
Sent from my GT-N7000 using xda premium

I had flashed the kernel on imilka's AOSP ICS, and lost root (cannot mount system/ as r/w in Root Explorer, data/ gives message: 'you don't have root access').
I reflashed the kernel with the same result - still no root.
Am I doing something wrong here?

Yes..........
Edit:
imilka's AOSP ICS is aosp rom, not stock
This kernel is for stock rom (chinese leak and derivatives)

chasmodo said:
I had flashed the kernel on imilka's AOSP ICS, and lost root (cannot mount system/ as r/w in Root Explorer, data/ gives message: 'you don't have root access').
I reflashed the kernel with the same result - still no root.
Am I doing something wrong here?
Click to expand...
Click to collapse
I am on V3 imilka
and HAVE ROOT !

So can this be flashed on criskelo ics rom thanks
Voted thread btw lol

nowy57 said:
I am on V3 imilka
and HAVE ROOT !
Click to expand...
Click to collapse
So to clarify, you retained your root access on V3 imilka rom after flashing this kernel?
Trying to figure out whether I should take the plunge and try myself

Unlikely,
You already have root with imilka AOSP. Why would you even flash this?

hopefully this has better battery drain life. I'm on rocket 1.5, so I just use cwm recovery to flash this?
Thanks
Sent from my GT-N7000 using xda premium

crawlgsx said:
Unlikely,
You already have root with imilka AOSP. Why would you even flash this?
Click to expand...
Click to collapse
Because this kernel is faster, that's why.

crawlgsx said:
Unlikely,
You already have root with imilka AOSP. Why would you even flash this?
Click to expand...
Click to collapse
Why? Read first post. TOUCH CWM

chasmodo said:
Because this kernel is faster, that's why.
Click to expand...
Click to collapse
How so? Proof?
Don't get me wrong I think it's great, but I don't see anything in the specs that would make this kernel any faster.

jam-kun said:
So to clarify, you retained your root access on V3 imilka rom after flashing this kernel?
Trying to figure out whether I should take the plunge and try myself
Click to expand...
Click to collapse
I have installed kernel via CWM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my ES EXPOLORER is saying that program has superuser acces

Don't know how to flash Rom

Hi, all
any experts here who can help advise me how to flash the N7000 which i had
downloaded from Samfirmwaew.com
since just downloaded N7000OZSLPF, but only 2 file one is TAR file and one is "SS_DL.dll"
how do i flashed ??
how do i used the ""SS_DL.dll" ???
please help.

ks1102 said:
Hi, all
any experts here who can help advise me how to flash the N7000 which i had
downloaded from Samfirmwaew.com
since just downloaded N7000OZSLPF, but only 2 file one is TAR file and one is "SS_DL.dll"
how do i flashed ??
how do i used the ""SS_DL.dll" ???
please help.
Click to expand...
Click to collapse
The TAR file is the only one you need. And you need to download Odin. Find the link in drketan's thread in the android development section.
Place the TAR file in the PDA section of Odin.
However, do NOT do any kind of wipe/factory reset in recovery or settings with LPF as it is official rom that contains the emmc brick bug that will brick your phone.
I seriously recommend doing more reading before you embark on the flashing journey.

andreww88 said:
The TAR file is the only one you need. And you need to download Odin. Find the link in drketan's thread in the android development section.
Place the TAR file in the PDA section of Odin.
However, do NOT do any kind of wipe/factory reset in recovery or settings with LPF as it is official rom that contains the emmc brick bug that will brick your phone.
I seriously recommend doing more reading before you embark on the flashing journey.
Click to expand...
Click to collapse
Thanks the advised ...
actually just want upgraded ICS from official 2.3.6 does only flashed with the tar file is ok

ks1102 said:
Thanks the advised ...
actually just want upgraded ICS from official 2.3.6 does only flashed with the tar file is ok
Click to expand...
Click to collapse
So, you are on GB now? If you are already on GB, don't bother flashing LPF (at least I wouldn't).
Are you rooted?
If so, just download a CM9 rom and flash it from Gingerbread. That way, you stay on a safe kernel.
If you insist on stock ICS, download Franco's kernel or Speedmod kernel and flash those in Mobile Odin after you Odin stock ICS. (Do NOT wipe data in stock ICS before you flash either of those kernels).
Read, Read, Read!

andreww88 said:
So, you are on GB now? If you are already on GB, don't bother flashing LPF (at least I wouldn't).
Are you rooted?
If so, just download a CM9 rom and flash it from Gingerbread. That way, you stay on a safe kernel.
If you insist on stock ICS, download Franco's kernel or Speedmod kernel and flash those in Mobile Odin after you Odin stock ICS. (Do NOT wipe data in stock ICS before you flash either of those kernels).
Read, Read, Read!
Click to expand...
Click to collapse
Thanks very much ...

ks1102 said:
Thanks very much ...
Click to expand...
Click to collapse
The "Thanks" button would be nice......

SS_DL.dll IS Odin!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the exported functions.

Zibri said:
SS_DL.dll IS Odin!
These are the exported functions.
Click to expand...
Click to collapse
Way to go. You get a gold star.
It's always so much harder when you have to try (David Gray).

Flash device via Odin .dll SS_DL.dll
thanks

[Q] So... which ROM to use and root?

Hello. This question might have been answered already in this thread http://forum.xda-developers.com/showthread.php?t=1424997
But there're about 320 pages over there & I'd really appreciate it if someone could help me out here... here's my phone setup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which ROM do I use to flash to my Galaxy Note? And would I need to do anything differently from the method given in the guide?

Your post is wayy too vague. What ROM are you currently on? Completely stock Gingerbread? Rooted?

andreww88 said:
Your post is wayy too vague. What ROM are you currently on? Completely stock Gingerbread? Rooted?
Click to expand...
Click to collapse
My apologies. My GNote(international version) is on official Samsung ICS & I just want to root it for the time being till a solid custom ICS based ROM is developed. To clarify I'd like to know which of the stock ICS ROMs in the list(in the thread mentioned in my first post) should I use to flash my Note with. I'm not a dev so if there's a risk in rooting the official Samsung ICS ROM then I'll wait till it's safer. What would you suggest sir?

I got my note yesterday and was overwhelmed with all the threads I ended up flashing ics in Odin and used speedmod kernel. Now all is good and using cleanote ROM.
Swyped from my GT-N7000 using XDA

usmanold said:
My apologies. My GNote(international version) is on official Samsung ICS & I just want to root it for the time being till a solid custom ICS based ROM is developed. To clarify I'd like to know which of the stock ICS ROMs in the list(in the thread mentioned in my first post) should I use to flash my Note with. I'm not a dev so if there's a risk in rooting the official Samsung ICS ROM then I'll wait till it's safer. What would you suggest sir?
Click to expand...
Click to collapse
I'd go back to Gingerbread to root it. Then, I'd flash a GOOD ICS rom (something CM9 based). But that is my opinion, I just don't like stock TouchWiz.
You can Odin one of those stock Gingerbread ROMs from DrKetan's thread in Android Development. I live in the U.S. so naturally I didn't have a country rom so I just used Open Germany. It doesn't really matter.

To root it use this. http://forum.xda-developers.com/showthread.php?t=1647148. I already tried in lq2.

jonpaslim said:
To root it use this. http://forum.xda-developers.com/showthread.php?t=1647148. I already tried in lq2.
Click to expand...
Click to collapse
Righto. Just a few questions... I went through the entire thread and found folks were having some issues. So:
1. Are you getting permanent full root via this method & SuperSU? Or is it temporary?
2. Any Wi-Fi/ overheating/ slowdown issues after rooting?
3. Do you need to rename CWM.zip to update.zip or do you leave it as is?
4. Lastly, if needed, can custom ROMs be flashed safely, and if so, generally which ones?

usmanold said:
Righto. Just a few questions... I went through the entire thread and found folks were having some issues. So:
1. Are you getting permanent full root via this method & SuperSU? Or is it temporary?
2. Any Wi-Fi/ overheating/ slowdown issues after rooting?
3. Do you need to rename CWM.zip to update.zip or do you leave it as is?
4. Lastly, if needed, can custom ROMs be flashed safely, and if so, generally which ones?
Click to expand...
Click to collapse
1. Permanent
2. No, the same.
3. Leave it as is. Go to stock recovery. Click update zip then choose CMW zip in external sd
where you should put the downloads. After that the recovery will change to touch CMW(use your finger to navigate), it is only temporary, then click INSTALL ZIP and find the rooting zip file you download. Finish you are rooted.
4. After rooting I use mobileodin to flash an ics. But you can flash any ics you want and flash ics kernel speedmod k3-3 to automatically get CMW or flash cf root to get CMW. About custom rom, this i recommend. http://forum.xda-developers.com/showthread.php?t=1716088. You must have speedmod k3-3 before flashing it, very important.

If you want another custom rom read carefully their procedure. Different custom rom different procedure, there are not the same. Be carefull, for example if you want to flash paranoid rom you must be in gingerbread rom before flashing it, if not, you will BRICK your phone. The cm9 is the same, you must be in gingerbread. Just read and again and again untill you know what you are doing, if not sure, read the threads, learn from their mistakes, ask question there, they will help you.

Success! I did it but only CWM.zip got installed from the ext SD card. I had to install SuperSU from the internal SD card. Now I'm gonna use MobileOdin to flash speedmod k3-3.

[Q] Moving from Rooted Stock GB to Custom ROMs Help?

Hi all,
I'm currently on stock Gingerbread, which I have rooted via the ODIN method (I flashed No-Wipe N7000XXLA6_N7000OXEULA1_XEU Europe (03/02/2012) from THIS thread) and would like to move onto installing custom ROMs (namely the ParanoidAndroid ROM)
I was just wondering if someone could provide me with some instructions on how to do it, as the ones in the thread doesn't mention any kernels or moving from stock ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks !

since you are on GB, you may also flash abyssnote42 touch kernel.
you may wish even to stay on that GB rom with that kernel, but from that setup, you can follow the rest of the instructions.

I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Install Rom: http://d-h.st/DtV
Install HYBRID Gapps: http://4ndr01d.com/drcmda/common/
Wipe caches, factory reset is a must if you're coming from another rom than CM9
If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
Reboot and edit your Apps Dpi under Settings/Paranoid Settings/P.A.D. Hold the powerbutton to see the new fullscreen-togglebutton
Click to expand...
Click to collapse
Thanks!

ShahinTehShiz said:
I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Thanks!
Click to expand...
Click to collapse
yes, your right, Because your on GB now you can just flash the abyss kernel and flash the ROM.
as for reverting to stock, When / If the time comes, just download a full firmware package from XDA or Sammobile and flash it using ODIN, that will flash everything back to stock
easy peasy !

That's it guys, I've decided I'm going to go with Franco kernel, from his thread here:
http://forum.xda-developers.com/showthread.php?t=1491428
BUT, I don't understand the instructions when he says
Stock XXLPY/LPF only - confirmed and working
Click to expand...
Click to collapse
Could someone give me instructions on what I would need to do to install his kernel? Thanks!
(Details of my current setup in first post)

If I flashed franco kernel or Speedmod kernel through Mobile ODIN that would be fine right? I don't want any yellow triangle and plan on installing either of the 2 kernels, and then after a while MAYBE install Paranoid Android.
Would that work?
Thanks!

yes, you can use mobile odin to flash kernels
you wont get yellow triangle via mobile odin

Custom Gingerbread ROMs
Hello Friends, I would like to humbly ask what are the various Gingerbread custom ROMs available for the Samsung Galaxy Note GT-N7000?

Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Sent from my GT-N7000 using xda app-developers app

dratif said:
Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Click to expand...
Click to collapse
Thank you for your response, dratif.
The custom ROM you have suggested, is it based on Gingerbread?
Also, what are the other available custom ROMs based on Gingerbread?

Friends, I am currently on a stock Gingerbread ROM and the Android version is 2.3.6
Considering I intend on flashing a custom Gingerbread ROM, should I look at one built only on 2.3.6 or would any custom ROM built on 2.3.x would suffice?

[Q] how to flash pre rooted GB ROM

hello.. i'm quite new with rooting and flashing.. and i'm having a problem. i tried to follow the instructions to the letter but somehow i got confused and now im stuck.
i was from and lrt stock rom with philz 2.7 safe kernel.
i wanted to change my ROM to ics paranoid android and the instruction on the thread was to flash a gb rom and root it.
i was able to flash the gb room but was not able to root it as i had downloaded a non directly rootable kl3 rb rom.
now i downloaded chainfire's pre rooted kj1 gb rom. i received the zip file, extracted it and got a .tar file. (not .tar.md5 like the previous non directly rootable kl3 i downloaded)
now here's the problem:
they said that it can be flashed with pc odin. i get an error using pc odin.
how will i solve this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Please flash pre rooted gb rom once again...then try to upgrade to paranoid
Hey! I think i have helped you...please hit thanks button!
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
Chk dis link
http://forum.xda-developers.com/showthread.php?t=1424997
Hey! I think i have helped you...please hit thanks button!

silenth2o said:
hello.. i'm quite new with rooting and flashing.. and i'm having a problem. i tried to follow the instructions to the letter but somehow i got confused and now im stuck.
i was from and lrt stock rom with philz 2.7 safe kernel.
i wanted to change my ROM to ics paranoid android and the instruction on the thread was to flash a gb rom and root it.
i was able to flash the gb room but was not able to root it as i had downloaded a non directly rootable kl3 rb rom.
now i downloaded chainfire's pre rooted kj1 gb rom. i received the zip file, extracted it and got a .tar file. (not .tar.md5 like the previous non directly rootable kl3 i downloaded)
now here's the problem:
they said that it can be flashed with pc odin. i get an error using pc odin.
how will i solve this?
Click to expand...
Click to collapse
You're initial mistake was going back to a GB rom, because philz safe kernel means just that, a safe kernel that you can directly flash PA/CM ICS/JB.
Can you atleast reboot back into your phone? even with the KL3 GB rom? If so, just follow this:
Download any new and recent ICS stock roms from here http://forum.xda-developers.com/showthread.php?t=1424997. I suggest the recent October ZSLPN, and follow the same installation/flash using PC odin. It should reboot, then after the phone reboots wait a few min and let it settle, then reboot into recovery and install and flash Philz ZSLPN 2.7 zip file, NOT tar, wipe cache/dalvik, and reboot. Back to working stock ICS, with root and safe kernel, then reboot back into recovery and flash whatever Paranoid Android or CM rom or any other AOSP rom you want, ICS or Jellybean.

If you still have the XXLRT rom file that you used and the matching Philz file, just flash them again. Boot into recovery and flash any custom rom you want.

go back to ics and philz and flash PA from there

so its not posible to flash jb rom over a stock pre rooted gb rom??

it is. All you need is cwm

shivg86 said:
Please flash pre rooted gb rom once again...then try to upgrade to paranoid
Hey! I think i have helped you...please hit thanks button!
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
Chk dis link
http://forum.xda-developers.com/showthread.php?t=1424997
Hey! I think i have helped you...please hit thanks button!
Click to expand...
Click to collapse
Is helping not enough m? You always asking pole to press thx . Let them choose
Sent from the man hiding in your attic.....

howard bamber said:
Is helping not enough m? You always asking pole to press thx . Let them choose
Sent from the man hiding in your attic.....
Click to expand...
Click to collapse
way back...lol
Sent from my GT-N7000