Database Develop

[Stock ROM][01/14/12][N7000XXLA3][2.3.6][with DL-Mirrors]

Android 2.3.6
orig. Up/Download-Hoster by DannyD:
http://hotfile.com/dl/141781856/f226...3_OXA.rar.html
Mirrors:
http://www.multiupload.com/9BTA4OY0BQ
pass: samfirmware.com
Files in package:
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar
GT-N7000-MULTI-CSC-OXALA3.tar
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.ta r
MODEM_N7000XXLA3_REV_05_CL1095424.tar
Odin3 v1.83
Q1_20110914_16GB
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.t ar
Firmware build: January - 10 - 2012.
Changes: faster, better touch, better battery.
Mirrors coming soon
/done

Is this one directly rootable or not?

is it full wipe?

wonsanim said:
Is this one directly rootable or not?
Click to expand...
Click to collapse
Sure...pls try the CF-Root LA1 Kernel or these by Riversource
i9000gt said:
is it full wipe?
Click to expand...
Click to collapse
Yes!

Chris X. said:
Sure...pls try the CF-Root LA1 Kernel or these by Riversource
Yes!
Click to expand...
Click to collapse
Thanks Chris

am I think good
to install this rom right ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Chris X. said:
Sure...pls try the CF-Root LA1 Kernel or these by Riversource
Yes!
Click to expand...
Click to collapse
I dubt this firmware is directly rootable with native root.This firmware is still rootable if you are on rooted firmware and flash this new one with odin mobile and everroot

I forgot Mobile Odin Pro. Sorry!
thX thay

nowy57 said:
am I think good
to install this rom right ?
Click to expand...
Click to collapse
KL8?

which file goes into where in in odin? anyone know?]]i guessed them without backing up lets see how it goes

Chris X. said:
KL8?
Click to expand...
Click to collapse
I am teling abiut methode
without REPARTITION
and no PIT file
analogously as on screen
?

i9000gt said:
which file goes into where in in odin? anyone know?]]i guessed them without backing up lets see how it goes
Click to expand...
Click to collapse

i9000gt said:
which file goes into where in in odin? anyone know?]]i guessed them without backing up lets see how it goes
Click to expand...
Click to collapse
PIT Q1_20110914_16GB.pit
PDA CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
PHONE MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
CSC GT-N7000-MULTI-CSC-OXALA3.tar.md5

nowy57 said:
I am teling abiut methode
without REPARTITION
and no PIT file
analogously as on screen
?
Click to expand...
Click to collapse
If you have 3 Files for flash via Odin, normally you also need a *.pit File!
If you have 1 File only to flash via Odin, you need no *.pit!
Greets

rofl thanks guy i got the wrong combination lol bricked my phone time to reflash again

glad to see the mirror, hotfile was gonna take about 2 hours to download
in the middle of flashing so lets see how it goes

O.K. edit...

we have to wait than Chainfire give us a CFkernel LA3 CWM

cb1100r said:
we have to wait than Chainfire give us a CFkernel LA3 CWM
Click to expand...
Click to collapse
just use the LA1 kernel for now

I have LA1 rooted + CWM. If I flash this newer version with CWM will CWM still be working with the newer firmware?

I need a guide to upgrade note

Hi there, there's a friend of mine who want to upgrade from ginger to ics and root too, can someone post a link to a guide step by step? this is a screen of the information if can help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Samsung Galaxy S II using tapatalk

The first step for you is to get root, and the easiest way to do that is to flash one of the pre-rooted stock Roms from here. Use PC Odin.

Rooting Guide
http://forum.xda-developers.com/showthread.php?t=1329360
ICS Stunner Flashing Guide
http://forum.xda-developers.com/showthread.php?t=1552554

so,having already LC1 i have to flash via PC odin the pre-rooted file "3*Files Wipe N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)"
and then follow the guide "ICS Stunner Flashing Guide"?is this all?

uhm?

anto989 said:
so,having already LC1 i have to flash via PC odin the pre-rooted file "3*Files Wipe N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)"
and then follow the guide "ICS Stunner Flashing Guide"?is this all?
Click to expand...
Click to collapse
Yes, that's right. You'll only have to double check if you get CWM Recovery with the pre-rooted Rom. If not, you'll need to flash CF--Root LC1 kernel to get the recovery.
After that, you're set to follow the Stunner flashing instructions.

chasmodo said:
Yes, that's right. You'll only have to double check if you get CWM Recovery with the pre-rooted Rom. If not, you'll need to flash CF--Root LC1 kernel to get the recovery.
After that, you're set to follow the Stunner flashing instructions.
Click to expand...
Click to collapse
I think the latest Stunner could be flashed over a rooted GB kernel(Abyss to be specific), no?
Edit: Confirmed
NEW STEPS BETA 4.3 ONWARDS:
Backup data apps.
Download and copy latest Stunner ROM on your SD Card.
Make sure you are on Rooted ROM. Reboot in recovery.
ONLY IF YOU ARE ON GINGERBREAD: Flash Abyss Kernel. Goto Advanced and Reboot Recovery. Tested and confirmed working on CF-Root Kernel.
Wipe Data (Recommended but not mandatory if you on Stunner ROM already)
Flash ROM.
Flash suitable Modem (Optional, recommended ICS LP5 modem)(not included in ROM)
Reboot and Read Caution.
Do not restore system apps or system data.
Click to expand...
Click to collapse

anilisanil said:
I think the latest Stunner could be flashed over a rooted GB kernel(Abyss to be specific), no?
Edit: Confirmed
Click to expand...
Click to collapse
No, no and no. I tried flashing Stunner directly over rooted GB two days ago, and the end result was no root.
So, rooted GB--> LP1 repack--> Stunner.

chasmodo said:
No, no and no. I tried flashing Stunner directly over rooted GB two days ago, and the end result was no root.
So, rooted GB--> LP1 repack--> Stunner.
Click to expand...
Click to collapse
Do you confirm this procedure?i'm now downloading LC1 pre rooted and ICS stunner...where I find LP1 repack?can you give the link pls?
thanks for all yours patience!

anto989 said:
Do you confirm this procedure?i'm now downloading LC1 pre rooted and ICS stunner...where I find LP1 repack?can you give the link pls?
thanks for all yours patience!
Click to expand...
Click to collapse
LP1 Repack - scroll down the page to find the download links.
And yes, I do confirm what I said earlier.
Rooted GB --> LP1 Repack --> Stunner

[Modem] All Radio's at 'One' Place (Latest: XXLT3)

Modems listed:
GINGERBREAD
XXKJ4
XXKJ6
XXKK5
UBKL2
XXKL7
XXKL8
XXLA1
DDLA2
XXLA3
XXLA4
XXLB1
XXLB2 <- Popular
DXLC1
ICE CREAM SANDWICH
XXLP1
ZCLP1
DDLP4
UBLP4
ZCLP5
DXLP5
ZCLP6
XXLPT
DXLR1
XXLR1 <- Popular
XXLRB
XXLRK
JELLY BEAN
XXLS1
XXLS3
DXLS8
XXLSA
XXLSС
XXLSO
XXLT3 <- Latest
Modem naming rules:
"XXKJ4"
XX - Modem intended country/region.
XX - General USA/Europe.
ZC - China.
UB - Brazil.
DD - India.
DX - Thailand.
You can check for more country codes here: Link
KJ4 - General modem version in 3 letters/numbers. Named generally from AA1 to ZZZ, though alot of numbers and letters got skipped.
Download links are there:
http://GalaxyNote.rgreat.ru/Modems/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mirror: http://depositfiles.com/folders/TEQD001BU
Zip files are CWM flashable.
Bin files are Mobile Odin/PC Odin flashable. Never rename bin files, or Mobile Odin will not recognize them!
Warning: Even if you want to flash bin file with Mobile Odin i advise to download CWM zip file and extract bin file from there, as it will give you extra CRC protection in case your download was corrupt.
ICS modems can be used with GingerBread ROM's and vice versa.
At least i never have problems with it before.
If you have new modem - post it in this thread and i will add it to the OP.

Cheers for this mate
Sent from my GT-P7510 using XDA Premium HD app

Thanks a lot. Please keep this thread updated.

Do you have LC2 modem?
Thanks

Modem files
For your collection two files. The LP5 and the new LPT from latest ufficial ICS ROM

Thanks.

raitospk said:
Do you have LC2 modem?
Thanks
Click to expand...
Click to collapse
LBLC2 added

can this be installed on stock ROM with no CWM?

niabi said:
can this be installed on stock ROM with no CWM?
Click to expand...
Click to collapse
I guess you can flash modem.bin with PC odin, but i never did it this way.

Great thread keep it up... hope you keep this thread alive and i vote that it be stickied....

rgreat said:
LBLC2 added
Click to expand...
Click to collapse
Thanks for that.. but is there cwm flashable file?

Yeah I tried it with PC odin and it worked Thanks!

raitospk said:
Thanks for that.. but is there cwm flashable file?
Click to expand...
Click to collapse
I don't have it.

rgreat said:
I don't have it.
Click to expand...
Click to collapse
Then may i flash with mobile Odin?
Or I flash with pc Odin, will I get triangle?

Just for your information mate the provided LBLC2 modem is actually DXLC1... i flashed it through mobile odin and end up baseband version = N7000DXLC1.

how are the modem different from each other?
which to use and which is best?

raitospk said:
Just for your information mate the provided LBLC2 modem is actually DXLC1... i flashed it through mobile odin and end up baseband version = N7000DXLC1.
Click to expand...
Click to collapse
Damn, thanks. I'll remove it.

rgreat said:
Damn, thanks. I'll remove it.
Click to expand...
Click to collapse
i just downloaded the DXLC2 stock rom from dr.ketan's link and extract the modem.bin which should be LBLC2 but end up is DXLC1 too...

Best Radio for ICS ?
Which is the best radio to use with ICS Official German..
I had Europe version of GB from new before flashing the ICS release
But it would seem the Signals on both Phone and Wifi aren't as strong as they were when I was running GB.
My original baseband was XXLA4
would this bring back my better signal if I flashed this one with ODIN ?
(assuming that I read correct that you can mix GB and ICS radios ?)
Cheers Chaps.....

jester27 said:
Which is the best radio to use with ICS Official German..
I had Europe version of GB from new before flashing the ICS release
But it would seem the Signals on both Phone and Wifi aren't as strong as they were when I was running GB.
My original baseband was XXLA4
would this bring back my better signal if I flashed this one with ODIN ?
(assuming that I read correct that you can mix GB and ICS radios ?)
Cheers Chaps.....
Click to expand...
Click to collapse
Some people prefer XXLB2, some ZCLP6, some XXLPT...
Any you can try your old XXLA4 if it was so good for you.

[Q] So... which ROM to use and root?

Hello. This question might have been answered already in this thread http://forum.xda-developers.com/showthread.php?t=1424997
But there're about 320 pages over there & I'd really appreciate it if someone could help me out here... here's my phone setup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which ROM do I use to flash to my Galaxy Note? And would I need to do anything differently from the method given in the guide?

Your post is wayy too vague. What ROM are you currently on? Completely stock Gingerbread? Rooted?

andreww88 said:
Your post is wayy too vague. What ROM are you currently on? Completely stock Gingerbread? Rooted?
Click to expand...
Click to collapse
My apologies. My GNote(international version) is on official Samsung ICS & I just want to root it for the time being till a solid custom ICS based ROM is developed. To clarify I'd like to know which of the stock ICS ROMs in the list(in the thread mentioned in my first post) should I use to flash my Note with. I'm not a dev so if there's a risk in rooting the official Samsung ICS ROM then I'll wait till it's safer. What would you suggest sir?

I got my note yesterday and was overwhelmed with all the threads I ended up flashing ics in Odin and used speedmod kernel. Now all is good and using cleanote ROM.
Swyped from my GT-N7000 using XDA

usmanold said:
My apologies. My GNote(international version) is on official Samsung ICS & I just want to root it for the time being till a solid custom ICS based ROM is developed. To clarify I'd like to know which of the stock ICS ROMs in the list(in the thread mentioned in my first post) should I use to flash my Note with. I'm not a dev so if there's a risk in rooting the official Samsung ICS ROM then I'll wait till it's safer. What would you suggest sir?
Click to expand...
Click to collapse
I'd go back to Gingerbread to root it. Then, I'd flash a GOOD ICS rom (something CM9 based). But that is my opinion, I just don't like stock TouchWiz.
You can Odin one of those stock Gingerbread ROMs from DrKetan's thread in Android Development. I live in the U.S. so naturally I didn't have a country rom so I just used Open Germany. It doesn't really matter.

To root it use this. http://forum.xda-developers.com/showthread.php?t=1647148. I already tried in lq2.

jonpaslim said:
To root it use this. http://forum.xda-developers.com/showthread.php?t=1647148. I already tried in lq2.
Click to expand...
Click to collapse
Righto. Just a few questions... I went through the entire thread and found folks were having some issues. So:
1. Are you getting permanent full root via this method & SuperSU? Or is it temporary?
2. Any Wi-Fi/ overheating/ slowdown issues after rooting?
3. Do you need to rename CWM.zip to update.zip or do you leave it as is?
4. Lastly, if needed, can custom ROMs be flashed safely, and if so, generally which ones?

usmanold said:
Righto. Just a few questions... I went through the entire thread and found folks were having some issues. So:
1. Are you getting permanent full root via this method & SuperSU? Or is it temporary?
2. Any Wi-Fi/ overheating/ slowdown issues after rooting?
3. Do you need to rename CWM.zip to update.zip or do you leave it as is?
4. Lastly, if needed, can custom ROMs be flashed safely, and if so, generally which ones?
Click to expand...
Click to collapse
1. Permanent
2. No, the same.
3. Leave it as is. Go to stock recovery. Click update zip then choose CMW zip in external sd
where you should put the downloads. After that the recovery will change to touch CMW(use your finger to navigate), it is only temporary, then click INSTALL ZIP and find the rooting zip file you download. Finish you are rooted.
4. After rooting I use mobileodin to flash an ics. But you can flash any ics you want and flash ics kernel speedmod k3-3 to automatically get CMW or flash cf root to get CMW. About custom rom, this i recommend. http://forum.xda-developers.com/showthread.php?t=1716088. You must have speedmod k3-3 before flashing it, very important.

If you want another custom rom read carefully their procedure. Different custom rom different procedure, there are not the same. Be carefull, for example if you want to flash paranoid rom you must be in gingerbread rom before flashing it, if not, you will BRICK your phone. The cm9 is the same, you must be in gingerbread. Just read and again and again untill you know what you are doing, if not sure, read the threads, learn from their mistakes, ask question there, they will help you.

Success! I did it but only CWM.zip got installed from the ext SD card. I had to install SuperSU from the internal SD card. Now I'm gonna use MobileOdin to flash speedmod k3-3.

[Q] Moving from Rooted Stock GB to Custom ROMs Help?

Hi all,
I'm currently on stock Gingerbread, which I have rooted via the ODIN method (I flashed No-Wipe N7000XXLA6_N7000OXEULA1_XEU Europe (03/02/2012) from THIS thread) and would like to move onto installing custom ROMs (namely the ParanoidAndroid ROM)
I was just wondering if someone could provide me with some instructions on how to do it, as the ones in the thread doesn't mention any kernels or moving from stock ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks !

since you are on GB, you may also flash abyssnote42 touch kernel.
you may wish even to stay on that GB rom with that kernel, but from that setup, you can follow the rest of the instructions.

I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Install Rom: http://d-h.st/DtV
Install HYBRID Gapps: http://4ndr01d.com/drcmda/common/
Wipe caches, factory reset is a must if you're coming from another rom than CM9
If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
Reboot and edit your Apps Dpi under Settings/Paranoid Settings/P.A.D. Hold the powerbutton to see the new fullscreen-togglebutton
Click to expand...
Click to collapse
Thanks!

ShahinTehShiz said:
I've heard a lot about abyss, but how would I revert back to stock kernel in the instance of warranty etc? And if I flash abyss I can follow the standard instructions for PA right? e.g
Thanks!
Click to expand...
Click to collapse
yes, your right, Because your on GB now you can just flash the abyss kernel and flash the ROM.
as for reverting to stock, When / If the time comes, just download a full firmware package from XDA or Sammobile and flash it using ODIN, that will flash everything back to stock
easy peasy !

That's it guys, I've decided I'm going to go with Franco kernel, from his thread here:
http://forum.xda-developers.com/showthread.php?t=1491428
BUT, I don't understand the instructions when he says
Stock XXLPY/LPF only - confirmed and working
Click to expand...
Click to collapse
Could someone give me instructions on what I would need to do to install his kernel? Thanks!
(Details of my current setup in first post)

If I flashed franco kernel or Speedmod kernel through Mobile ODIN that would be fine right? I don't want any yellow triangle and plan on installing either of the 2 kernels, and then after a while MAYBE install Paranoid Android.
Would that work?
Thanks!

yes, you can use mobile odin to flash kernels
you wont get yellow triangle via mobile odin

Custom Gingerbread ROMs
Hello Friends, I would like to humbly ask what are the various Gingerbread custom ROMs available for the Samsung Galaxy Note GT-N7000?

Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Sent from my GT-N7000 using xda app-developers app

dratif said:
Checkrom is best...i had 44hours battery life and still had 15%battery left;-)
Click to expand...
Click to collapse
Thank you for your response, dratif.
The custom ROM you have suggested, is it based on Gingerbread?
Also, what are the other available custom ROMs based on Gingerbread?

Friends, I am currently on a stock Gingerbread ROM and the Android version is 2.3.6
Considering I intend on flashing a custom Gingerbread ROM, should I look at one built only on 2.3.6 or would any custom ROM built on 2.3.x would suffice?