Related
Thanks in advance for any response!
The followings are my phone's symthoms:
1. My phone WAS FANTASTIC until I updated new Darky extreme version 9.2 (upgrade from 9.0)
2. I degraded it to the stock rom with Ryan's OLFG -> Working very well...
3. Until the phone was restarted. The phone was still working however
4. IT BECAME FREEZING. I couldnt scroll, couldnt touch the screen, or the phone response was like 5 mins later for each touch.
5. I followed instructions on the internet to flash with stock rom (JM8) and upgraded it to JPO, and the result is
6. THE PHONE COULDNT BE BOOTED at the Galaxy logo.
7. I tried to flash the phone over and over with different stock roms using ODIN 1.3 (with well understanding about repartition and PIT)
8. NOW, my phone is still able to access the download mode, but my PC CANNT SEE THE PHONE DRIVER ANYMORE(tested on 3 other laptops with the same result)
9. Reinstall USB drivers like 20 times, the results have been the same.
TO me this should be a phone death. Im gonna purchase the new Galaxy S 2
HOWEVER, If there is anyway to revive my phone back to normal (Cuz I wanna get some important data in the internal card), I will not only send a big gratitude but some DONATE as well.
Thanks.
so you put the phone in download mode first... then you attach the USB ???
Does anything happen when your in Odin ?? does it not say connected or anything ??
and have you tried doing a factory reset in recovery mode ??
aslong as your phone can go into download mode there is still hope so dont give up on it just yet
U obv have samsung kies right?. Go on processes on ur pc ctrl alt del n kill the kiestrayagent process
Sent from my GT-I9000 using XDA App
Surely I killed KS before doing ODIN. The PC(s) said it was Unknown device.
My phone was on when android 2.1 installed (but freezing, not just lagging .... completely freezing on the home screen) and would not boot if i installed 2.2
Sigh....
Thanks for your replies
The PC(s) said it was Unknown device.
Thats generally a USB /driver/windows problem .
You installed deadlys rom and it should still be recoverable even from that .
Is your phone picked up via Kies phone/Odin will need Kies installed .
I would have flashed back to a clean copy of Eclair first off to get the phone working .
jje
Both Kies and Odin could not see my phone... I killed Kies process before doing Odin, but the result was still a sadness.
So here't the full background, it's not long, please read:
http://www.darkyrom.com/community/i...-bricked-my-sgs-wonder-what-i-did-wrong.2032/
Long story short, it looks like I bricked my SGS when trying to flash with Odin, even though I followed the tutorial very closely. When I power up the phone, it just gives me the image with phone, exclamation mark and PC on it. It does, however, go into download mode when powered up with VolDown and center button.
How do I save it? Do I need the JIG (God, please say no! )
Have you tried reflashing with odin.
Jig is only needed when you cant get into download mode.
Also i just looked inside the darky rom topic.
Have you flashed the jvk rom first with the bootloaders?
Edit: as said below. If you gonna reflash, flash a stock rom. Not the darky rom. First priority is to make your phone work.
Sent from my GT-I9000 using XDA Premium App
Yeah, you have download mode.
Now, fire up Odin and load a few rom files into it, connect the phone and see if the PC still recognises it. (Do not flash, Just a test)
If so...
Flash a stock rom.
Somehow, I was able to flash it with Odin in Download Mode this time. Phew! I read somewhere that the flash might fail if You're using wrong USB port. At first I connected my phone to a eSATA/USB combo port, and for the second time (after brick) I tried a normal USB 2.0 port in my laptop. Maybe that's what made the difference, I have no idea.
Anyway, I'm running stock Samsung 2.3 rom and am trying to install Darky's 10.0 RC3 on it - I am running into some problems, but thankfully they're much less serious than the brick that I was able to fix.
Thanks for Your help!
I ran into similar problems last week. A rom wouldn't flash, so I gave it an hour and it proceeded nowhere. Had to pull the plug on it.
Sometimes it just takes a few times plugging and unplugging repeatedly until it just happens to get detected by Windows. Maybe just a bit of luck too
Congrats on your recovery.
Just wondering which stock 2.3 rom did you use and which Odin setting you used to get your phone up and working again.
Here is my post / problem, seems similar to yours
http://forum.xda-developers.com/showthread.php?t=1020223
Thanks
I had the same issue like warnec on my first darkyy flash, finally everything went fine...don't worry!
just try to reflash with odin (maybe going for a stock version first is a good idea), be sure to do everything as mentioned in the guides out there. and be sure your computer works stable, maybe you want to quit some tasks in the background (however it should work even without but something crashed my odin once...)
Reflash with Odin to make your phone work again. I suggest using a stock 2.2.1/2.3.3 ROM. It is important that it consists of the 512.pit file, a PDA file, a Phone file and a CSC file. The ROM must have bootloaders included!
Now, disconnect your phone and turn it off.
Start Odin and load all the files. Tick 'Repartition'.
Start your phone in Download Mode by pressing Vol-Down, Home and Power.
Connect it to your PC and wait for Odin to say 'Added!'.
Now hit Start, wait 2-3 minutes until it is done and your phone should succesfully reboot!
Sent from my GT-I9000 using XDA Premium App
Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.
chriszak said:
Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.
Click to expand...
Click to collapse
does not sound very good...could you solve your problem yet?
Had to take the phone into Bell. Waiting on return of it and currently using a loaner HTC Desire Z from Bell.
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all
The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app
Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
i update my phone using odin with pit file .
now phone not starting any help..
AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?
now phone not booting up at all..
AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.
same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.
see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium
i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works
Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo
I had Android 4.0.3 (IceCream Sandwich) on my Galaxy S GT-I9000B (I did install it through Odin, nothing went wrong), but is was laggish (too much for it to handle, I think) and after a few months, I decided to roll it back to 2.3.3 (Gingerbread).
I started the process to install the firmware through Odin3 v1.85 - the file I download (from sammobile.com/firmware, had only one file that I used on the PDA space.
Odin recognized my phone and I started to install it, but after a while my phone was stuck on the downloading screen (2 hours of installation, I tought that something went wrong).
I then turned my phone off to try and install again, but when I turned it on, there were a Phone - exclamation mark - Computer Symbol.
I can get it to dowlonad mode (Volume Down+Home+Power), but when I plug it to the pc, it says "unknown device" and it can't find drivers for it.
I think I have the latest drivers from Samsung (I had from Kies and I re-downloaded a file somewhere from this forum named SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe).
It appears that since windows can't install the drivers, Odin doesn't recognize the device - it was recognizing it before, when I was installing the firmware.
Now I'm stuck - I tried anything I saw in this forum and in other places - I did even pray for a miracle, but it didn't work
I know that there must be a way, but I don't know how.
Before I forget, I'm using Windows 7 Ultimate x64.
If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.
KainFromNod said:
I know that there must be a way, but I don't know how. Before I forget, I'm using Windows 7 Ultimate x64.
Click to expand...
Click to collapse
Ok, k4Z3666, has given you a starting point...the phone is still in download mode but without a booting ROM, so its OK, the problem is your PC, USB cable or USB port. If you want to be quick about it, just try on a lap top..if not a simple Reboot of PC ( after removing power cord) and Phone (after a battery Pull), and a switch to a different USB port at the back of PC can solve this for some...for other solutions try these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 anything else you may need can be found on My Android collections., link below
k4Z3666 said:
If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.
Click to expand...
Click to collapse
I tried other USB Ports and also rebooting. It was working just fine - it seems like a driver problem to me.
My notebook is dead, but I'll try using someone else computer.
Does Odin runs in Windows XP? I might try it in my virtual box - I doubt that it will work, but it is the best thing I have to do untill tomorrow.
I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300
KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]
KainFromNod said:
I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah
Ok, I'm posting it here just to leave a reply and reference for future generations, as my problem was solved.
xsenman said:
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
I used a firmware from my country (available here: sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=ZTO&os=1&type=1#firmware) and I wiped the cache (I'm not sure what this means, but I believe it is the 2 options on volume up+menu+power)
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300
Click to expand...
Click to collapse
k4Z3666 said:
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]
Click to expand...
Click to collapse
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
yahyoh said:
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah
Click to expand...
Click to collapse
ICS wasn't faster here - it was laggish and always crashed some common apps (gallery, music player). I believe that the firmware wasn't completely "done" as it was being adapted from another version (my phone is brazilian) and some functionalities that it has (i.e. digital TV) wasn't available.
What I done to correct the boot was simple (I found a tutorial in a brazilian site, so it had all the roms that I needed).
1) Used a PIT and a stock rom to get it back to factory version;
2) Upgraded to Froyo (original) - That was kind of a mistake, the tutorial said to do it because then KIES would update it automatically to Gingerbread. The phone was fully functional, but KIES said that it couldn't update it (it recognized the phone and everything).
The tutorial stoped there, but since I had the ROM, I used Odin to install Gingerbread (the one that was looping) and it was done.
Now I need to remember how to root it because there are some dumb apps who can't get away (i.e. Orkut app, some demo games).
Thank you all for the help!
KainFromNod said:
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
Click to expand...
Click to collapse
From recovery you can always try to flash another kernel, that would probably resolve things too. Anyways the problem's solved, glad to help