Database Develop

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob

Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).

http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7

please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...

I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.

That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob

I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!

went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!

odin doesnt reconize phone

which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.

And make sure you have the correct drivers installed. CRUCIAL.

Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?

^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App

Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.

lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2

ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.

^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Captivate Soft Brick - Need a rooted Odin solution.

Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.

if he can access recovery, try wiping everything thru recovery then start again

Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.

What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)

@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.

You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.

REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament

Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others

- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.

viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App

bricked help

hey, i am posting this for a friend who bricked his phone and doesn't know much about it..
he was running serendipity 7 which is a jvo rom, and tried flashing the pauldiddy remix theme, which says is only meant for jvp and jvq roms. i used a jig, to get the phone into download mode, and the computer detected it when i plugged in the usb. but when i tried to use odin one click to go back to stock, it would get stuck at the "Do not turn off target". im not sure if anyone knows a fix for this, or if i should try using the method from this thread http://forum.xda-developers.com/showthread.php?t=1153310 instead, but i figured i would ask before i messed around with it too much
any feedback would be appreciated

how long do you wait before throwing in the towel? it does take a minute or two to finish it's task ? And are you opening Odin before you hook the usb to the phone ?

waited probably about 5-10 minutes. yeah i opened odin first, and it detected the phone and showed the Added! text

Just out of curiosity, what is the phone doing right now that you're trying to use Odin on it?
The reason I ask is that if you can get to CWM recovery, you might just be able to re-flash the rom (assuming it's a wipe package) and it would take care of the issue.

i cant get into recovery, but i can get into download (using the button combos). not sure if that means anything either

Well keep trying, and you might want to try the odin 1 click. I have a Cappy that got dipped in the pool, it would not go into recovery at all but I could get the download all the time, But it kept getting stuck at the i896 screen or the AT&T screen (odin 1 click) after 3 weeks of trying and having to wait 3 days for it to come out of it's coma it now works fine. If you try the odin 1 click it might work for you just make sure it's not ver 10.10 I think (look under battery). What screen does it go to once you press power IE: black screen rogers screen etc. ?

ive tried using odin 1 click.. like i said, the first time odin actually picked up the device, but it wouldnt get past the "do not turn target off" prompt. but i tried plugging it in again, and now it doesnt seem to even pickup the phone. when i when i try to boot the phone, its just a black screen. thanks for the input though

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.

You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.

See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA

http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA

DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...

Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.

gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.

What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA

Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

Please help i will donate/ pay u

I have a Samsung Captivate which has been rooted and unlocked...it was running 2.3.5 uckk4
I believe I got a virus from downloading some app that was not on the market well long story short I tried to flash it back to a different version
I believe I put something in odin bootload that I wasnt suppose to it was an accident as you see I am a total noob at this then I use the 1 click unbrick now my phone keeps rebooting itself but i looked at the about phone which i get to for a few seconds before it reboots itself again and this is what it says
Firmware
2.3.3
Baseband
1879UCKF1
Kernel Version
1897UCKK414489
BUILD
gingerbreadUCKF1
I have tried a master reset since I could get it into debug just that it keeps looping and it worked in odin but not on my phone and this is what it generated
<?xml version="1.0" encoding="UTF-8" ?>
- <REFLASH>
- <UNIT>
<ESN>00000000000000 /0</ESN>
<TIMESTAMP>20120424002823</TIMESTAMP>
<RESULT>_20120424002823</RESULT>
<SOFTWARE_NAME>Downloader</SOFTWARE_NAME>
<SOFTWARE_VER>3.00</SOFTWARE_VER>
<OEM_NAME>SAMSUNG</OEM_NAME>
</UNIT>
</REFLASH>
PLEASE HELP ME....if you can get my phone operational again I WILL DONATE MONEY TO YOU!
I have tried EVERYTHING and searched FAR AND WIDE!!!! I almost forgot Odin does not display my device anymore...ie such as com4...I really have tried everything that's why I am willing to donate/ pay you if you can solve my problem....if odin recognizes my device then it gets stuck halfway through. As of today my computer recognizes my device but Odin does not!
I have read and tried everything here
http://forum.xda-developers.com/showthread.php?t=858765
and here
http://forum.xda-developers.com/showthread.php?t=731989
and alot of other things listed and not listed on this site
NEW IFO: now I'm stuck at ATT logo and can not get into download mode

This thread will selfdestruct in 5...4...3...2...1....

DANG IT wrong section? SORRY MODERATORS!!!! SORRY

Please dont delete please just move it please!!!!

oh goodness... No need for donation but all you need to do is download a stock package odin like kk4 which is the most recent. Flash in download mode. There a sticky at the top of the thread list with all the packages.
In the future post in the questions/help section.

diskjockee said:
DANG IT wrong section? SORRY MODERATORS!!!! SORRY
Click to expand...
Click to collapse
Ok I gave you the only warning in the PM. I have moved this thread. A word from the wise. Learn what you are doing before you do it. This is not something to be taken lightly. You could very easily mess something up beyond repair. Take a few hours to spend reading and researching.

ThisWasATriumph said:
oh goodness... No need for donation but all you need to do is download a stock package odin like kk4 which is the most recent. Flash in download mode. There a sticky at the top of the thread list with all the packages.
In the future post in the questions/help section.
Click to expand...
Click to collapse
I have tried that it doesnt work. thats was one of the 1st things I tried

try this
http://forum.xda-developers.com/showthread.php?t=1266172

Make sure you're using a usb port that is on the motherboard (back of computer). Before you plug in your phone to flash, set up Odin first. Put all the files you are going to flash in the right places. After Odin is fully set up, plug in the usb to the back of your computer, then to you phone. Make sure you are in download mode. If the usb still isn't working, try a different USB port that is on the back of the computer. Connecting the usb to the back of the pc is very important. Odin doesn't recognize my phone when it's plugged in the front, when the phone is in download mode. Only the back usb ports.
If Odin still doesn't recognize the phone, try a different USB cable. But do everything else the exact same way as I described.
Also make sure you fully setup Odin before you plug your phone in to the usb.
Sent from my Serendipity VII flashed Captivate using xda premium

Limitz Cash said:
Make sure you're using a usb port that is on the motherboard (back of computer). Before you plug in your phone to flash, set up Odin first. Put all the files you are going to flash in the right places. After Odin is fully set up, plug in the usb to the back of your computer, then to you phone. Make sure you are in download mode. If the usb still isn't working, try a different USB port that is on the back of the computer. Connecting the usb to the back of the pc is very important. Odin doesn't recognize my phone when it's plugged in the front, when the phone is in download mode. Only the back usb ports.
If Odin still doesn't recognize the phone, try a different USB cable. But do everything else the exact same way as I described.
Also make sure you fully setup Odin before you plug your phone in to the usb.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
I just tried that....it worked but now I'm stuck at the ATT logo

You probably have mismatch kernel and bootloader loader. Maybe you can try to wipe data / factory reset in recovery.
Sent from my Serendipity VII flashed Captivate using xda premium

If you continue to go into a bootloop then I recommend a USB jig for the galaxy s series. I had had that happen before, Nothing worked, couldnt get it into download mode, couldnt get into recovery, Until I got the USB jig, Fixed my problem right away, and I flashed back to stock. The USB jig is only 6 bucks on ebay. Ill link you if you are interested.

Limitz Cash said:
You probably have mismatch kernel and bootloader loader. Maybe you can try to wipe data / factory reset in recovery.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
I know you're trying to be helpful, but there is no such thing as a kernel/bootloader mismatch...

b-eock said:
I know you're trying to be helpful, but there is no such thing as a kernel/bootloader mismatch...
Click to expand...
Click to collapse
Are you sure? Becuz I tried to flash an overclock kernel on my rom, and kept getting a bootloop. Then after flashing a few different kernels, the kernel that came with my rom didn't even work. I had to go back to stock and reflash my rom.
Idk, maybe it was just me then. I apologize. thank you for correcting me, that's how we learn what's right, and what's wrong.
Sent from my Serendipity VII flashed Captivate using xda premium

noob advice
I'm a noob, so this comment might just serve to show how little I know, but whenever I find myself in a bootloop situation, I've noticed that the problem starts with the initial attempt of installing a rom via a kernel with an older version of CWM. During the post-install boot sequence, I'll see the AT&T splash screen, a CWM screen with script running, and then a reboot. Usually, accessing the CWM (now on a higher version) and reinstalling the rom will get it working. Not quite kernel / bootloader mismatch, but close.

whisky23 said:
I'm a noob, so this comment might just serve to show how little I know, but whenever I find myself in a bootloop situation, I've noticed that the problem starts with the initial attempt of installing a rom via a kernel with an older version of CWM. During the post-install boot sequence, I'll see the AT&T splash screen, a CWM screen with script running, and then a reboot. Usually, accessing the CWM (now on a higher version) and reinstalling the rom will get it working. Not quite kernel / bootloader mismatch, but close.
Click to expand...
Click to collapse
Ohh ok. That might have been my problem before. Thank you.
Sent from my Serendipity VII flashed Captivate using xda premium

Try this.
Buy a jig. Either off of Ebay or mobiletechvideos.com
That week get you into download mode.
Then find the HEIMDALL flasher for a build. (my favorite was the one click for saurom Kk4)
Install heimdall drivers, and flash. Boom. Functioning phone.