Database Develop

I know,Another Bricked Phone...sigh

I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.

It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.

If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom

I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.

i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.

Try current usb port
Sent from my SCH-I897 using XDA App

Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...

You could try to use a JIG to force your phone into Download Mode

Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?

at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.

if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms

have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good

magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless

Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.

Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too

are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989

You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!

glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol

zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob

Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).

http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7

please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...

I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.

That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob

I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!

went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!

odin doesnt reconize phone

which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.

And make sure you have the correct drivers installed. CRUCIAL.

Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?

^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App

Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.

lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2

ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.

^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Captivate Soft Brick - Need a rooted Odin solution.

Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.

if he can access recovery, try wiping everything thru recovery then start again

Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.

What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)

@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.

You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.

REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament

Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others

- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.

viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App

Boot loop Issue - Fuzzy colours

I have an issue, I was updating my Captivate to 2.2 with Odin3 One Click and that worked fine, then for some reason I cannot explain I tried to use Odin to upgrade to 2.3 (the blow fish one) flashed the image then got the restart with the blowfish and then used Odin to complete the process as per the instructions and got soft brick, I fixed this with the one click unbrick, then it went into a boot loop.
The loop is AT&T screen then fuzzy colours and a restart (like a graphics card has gone haywire).
I can get into the download mode by removing the battery, plugging the USB cable in holding the volume buttons then installing the battery the download mode appears but Odin is not picking up the phone.
When it is in the loop I can get Odin to identify the phone but when I try to go into download mode it won’t identify it. I have tried with adb and it does the same thing.
Any suggestions? I have looked at the forums for a long while so my apologies if this has already been covered.

Have you installed the necessary drivers on your computer?
Sent from my glitched ICS Captivate using XDA App

You may want to also take a look at the "Captivate Connection Issues" thread - it has some steps to help get you connected in download mode.
Once you have it connected, you can probably safely flash a Gingerbread stock rom to get back to a clean place to start flashing from.

Hi,
Yes forgot to mention that I have installed the correct USB drivers, Odin picks up the phone during the loop so that tells me that the Cable is fine and the drivers are working. I will try to re-install them just to be safe.
Thanks I will look through the connection issues threads and see if that helps, I am at work at the moment so will be later in the day.

The garbled bootscreen happens when you try to run gingerbread with froyo bootloaders. You must have chosen a bootloader free package. Instead, for your first time flashing to GB (and first time only), use a package with bootloaders
Sent from my CM9 ICS i897 Captivate

Haplo Nash said:
... upgrade to 2.3 (the blow fish one) ...
Click to expand...
Click to collapse
What is this blow fish one that you speak of? Korockinout13 is correct that you are getting the garbled screen because of an incorrect bootloader. You may be having issues because the ROM you flashed might be an i9000 based ROM and you will need different drivers.
DISCLAIMER: It's still earlier early and I haven't had all my coffee yet. Please correct my logic if it is wrong.

Red_81 said:
What is this blow fish one that you speak of? Korockinout13 is correct that you are getting the garbled screen because of an incorrect bootloader. You may be having issues because the ROM you flashed might be an i9000 based ROM and you will need different drivers.
DISCLAIMER: It's still earlier early and I haven't had all my coffee yet. Please correct my logic if it is wrong.
Click to expand...
Click to collapse
I believe the blowfish one he's referring to is the Fugu Root method.

About One-Click UnBrick
This Software:
Will work on all Samsung devices which use Odin3
Is a single, portable executable
Is the first one-click anything for our devices on Linux
Works on Mac
Works on Windows
Is open source
Is programmed in Java
Deploys and installs Heimdall for your OS
Is super easy to use.... Only one button!
Click to expand...
Click to collapse
The bolded line is why ODIN no longer detects your phone. The Heimdall driver has been installed. You can either go grab a Heimdall one click from here or remove the Heimdall driver (trying another USB port may work) and then try using ODIN again.

Yes it was the Fugu Root's one and I didnt update to a Gingerbread bootloader before I flased it onto my phone.
Thank you for all your help, I will never mess around with my phone at 2am again.
I managed to get Odin to pick up the phone and was able to re-load FROYO and will start again.

Do Apex ROM Heimdall one-click flash with bootloaders enabled. Most painless process.

[Q] Problem with USB Debugging mode, any advice?

This is my first post so ill try to make it the least noobish that i can.
This is the current state of my phone
Device : Samsung I897
Firmware :2.3.5
Baseband : I897UCKK4
Kernel : 2.6.35.7-I897UCKK4-CL614489
Rom and Kernel flashed and method : Andromeda w/ Ursa Minor using Odin3 v 1.7
I got to this build from my original 2.2 froyo build about a week ago. I made a mistake out of haste when I was flashing the Ursa Minor kernel and whatever i did lead to me soft-bricking my phone. After that, every time i booted my phone it would be stuck at the Ursa Minor screen but it was still detected via usb by my computer. I was able to use ADB to reboot into recovery mode and then I tried wiping all data/cache. Unfortunately that made matters worse as when i rebooted it i was stuck at the same screen and this time the phone was NOT detected via usb by my computer.
At this point I made a jig and booted the phone into download mode and was able to use Odin 1-click to wipe my phone and return it to stock. This left my phone unbricked and it booted into GB 2.3.5 this time and not Froyo 2.2 like I had it originally. Its functional for the most part except for these issues.
1. None of the button commands work to boot into recovery/download
2. The boot animations are very laggy plus i see a very unpleasant screen of rainbow artifacts/blocks (the artifacting only lasts a few seconds)
3. And finally, no matter what i try USB debugging mode will not connect and I cant use it. **
**Things i tried: Every button command, every usb slot, re installing drivers and rebooting pc; over and over and over.
I've spent the past 24 hours, albeit with some sleep, scouring not only XDA, but any forum i can find, for answers. Unfortunately everything I've found has either been a solution for a different issue entirely or it just didnt work on my phone. Im not entirely sure what to do at this point. I can still enter download mode with my jig so i've thought about flashing a new kernel with odin3 but im hesitant as I dont want to mess around with my phone anymore until im certain about it.
I guess the overall question is what could possibly be happening that USB debugging wont work but USB mounting does work? On top of that, what would be a wise course of action after this? I suspect that my kernel is the issue here, but that guess is almost purely pedantic. If anyone can help or provide any advice i will be forever grateful!

All will be fixed if u Odin 1 click the KK4 WITH the GB Bootloaders included...http://forum.xda-developers.com/showthread.php?p=18370912. Instructions and info are included with the download.
If u wanna move on to a Developer's Rom after u flash the Stock KK4 with Bootloaders, then use Red_81's [Utility] KK4 Easy Root that u can find in the Dev forum.
Sent from my SGH-I777 using xda premium

4-2ndtwin said:
All will be fixed if u Odin 1 click the KK4 WITH the GB Bootloaders included.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
This will be ok even if i already flashed the GB bootloaders when I first tried flashing andromeda?

(Ooops on the thx. Fingers movin to fast.)
Ur #2 above --- The pixelated screen u see means that u did not flash the GB Bootloaders.
Sent from my SGH-I777 using xda premium

WalkerTex said:
This will be ok even if i already flashed the GB bootloaders when I first tried flashing andromeda?
Click to expand...
Click to collapse
Well 4-2ndtwin beat me to it.

My fingers r in ninja mode lol
Sent from my SGH-I777 using xda premium

I have a side question now. Would the lack of those bootloaders be a reason why my jig doesnt seem to be working now? Been trying for the past hour using the three resistors w/ scotch tape method but not results...
Edit- Nevermind, i got it into download mode from adb somehow.