I am in the US. I received a Galaxy Note as a gift. Purchased off NewEgg, sometime in December, allegedly from Canada, but I think that was a lie.
Samsung USA and Samsung Canada both denied the existence of this model.
Version page says: imgur.com/QezuO
PDA: N7000XXKK9
PHONE: N7000XXKK5
CSC: N7000OJVKK2
Kernel version: 2.6.35.7-N7000XXKK9-CL725676 [email protected] #2
Build number: GINGERBREAD.XXKK9
My carrier is T-Mobile, with terrible, terrible data connection. (No 3G)
Will it be possible to receive OTA updates even though T-Mobile has never heard of it?
Kies says the device is unsupported. Is it possible to straighten that out?
Finally, if I need to use Odin, or some other tool to flash a ROM, how can I do a full backup first?
Neebat said:
I am in the US. I received a Galaxy Note as a gift. Purchased off NewEgg, sometime in December, allegedly from Canada, but I think that was a lie.
Samsung USA and Samsung Canada both denied the existence of this model.
Version page says: imgur.com/QezuO
PDA: N7000XXKK9
PHONE: N7000XXKK5
CSC: N7000OJVKK2
Kernel version: 2.6.35.7-N7000XXKK9-CL725676 [email protected] #2
Build number: GINGERBREAD.XXKK9
My carrier is T-Mobile, with terrible, terrible data connection. (No 3G)
Will it be possible to receive OTA updates even though T-Mobile has never heard of it?
Kies says the device is unsupported. Is it possible to straighten that out?
Finally, if I need to use Odin, or some other tool to flash a ROM, how can I do a full backup first?
Click to expand...
Click to collapse
First root your device from Here then install Titanium Backup.
Neebat said:
Version page says: imgur.com/QezuO
PDA: N7000XXKK9
PHONE: N7000XXKK5
CSC: N7000OJVKK2
Click to expand...
Click to collapse
Your Note comes with South African firmware and CSC. See here:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=3
ranjan.alva said:
First root your device from Here then install Titanium Backup.
Click to expand...
Click to collapse
Thank you. That was a good start. Titanium Backup is running now. I'll check back tomorrow to see if anyone finds more information about my phone.
chasmodo said:
Your Note comes with South African firmware and CSC. See here:
Click to expand...
Click to collapse
That's fascinating. Not the sketchiest place it could have come from, but definitely not Canada. It looks like the January update missed South Africa.
So, where does that leave me as far as updating my firmware?
Will it update on its own when S. African devices get the update? Is there any way I can connect it to Kies? Is there any benefit and/or risk to reflashing it to another region?
Neebat said:
Will it update on its own when S. African devices get the update? Is there any way I can connect it to Kies? Is there any benefit and/or risk to reflashing it to another region?
Click to expand...
Click to collapse
If you root your Note as mentioned above, you can forget about Kies (which is a piece of ****e, BTW), and flash any stock or custom Rom you like. Just check the Dev section and you'll find a wide choice of both.
chasmodo said:
If you root your Note as mentioned above, you can forget about Kies (which is a piece of ****e, BTW), and flash any stock or custom Rom you like. Just check the Dev section and you'll find a wide choice of both.
Click to expand...
Click to collapse
Too many choices. :-/
Since I posted this thread, I have:
1. Learned a huge amount about my phone and how it works internally.
2. Rooted my phone using the ZergRush script.
3. Backed up everything on my phone using Titanium Backup.
4. Installed Odin Pro
Now, I have to decide which Firmware to install. I'd prefer a stock ROM, since I like the stock UI and apps.
It sounds like I have to change my CSC code to continue? Since there is only one ROM for my CSC. Will this step wipe my phone?
Are there any reasons to prefer one region's ROM over another? "Open" sounds like a good thing. Does it matter?
Don't worry about changing the csc. Its always an option, but entirely unnecessary unless you want to go full stock and remain unrooted. If your csc matches the csc of the official rom you have installed, you'll get kies/ota updates for that region (with dbt probably being the best one)
However, if you always want to flash the latest official firmware via mobile odin, regardless of region, and retain root, your csc is irrelevant.
It doesn't matter which rom you use from the list. I'm currently on the Germany lb1 rom, and the only difference is that the initial 'touch the Android to begin' screen was in German. There's a button on that screen to select your language from a list.
Sent from my GT-N7000 using xda premium
newg said:
It doesn't matter which rom you use from the list. I'm currently on the Germany lb1 rom, and the only difference is that the initial 'touch the Android to begin' screen was in German. There's a button on that screen to select your language from a list.
Click to expand...
Click to collapse
Thanks! As you can see here, me too, now: //i.imgur.com/1PEH6.png
I didn't get to see the language select screen, because my phone didn't get wiped. Was it supposed to?
Neebat said:
Thanks! As you can see here, me too, now: //i.imgur.com/1PEH6.png
I didn't get to see the language select screen, because my phone didn't get wiped. Was it supposed to?
Click to expand...
Click to collapse
No, it's not supposed to get wiped. I just wiped mine by choice.
Sent from my GT-N7000 using xda premium
Neebat said:
Thanks! As you can see here, me too, now: //i.imgur.com/1PEH6.png
I didn't get to see the language select screen, because my phone didn't get wiped. Was it supposed to?
Click to expand...
Click to collapse
You were supposed to. Let me explain:
It's always a good practice to start clean when flashing new Roms (unless the Rom developer doesn't specify otherwise). So, the usual procedure before flashing new Roms is:
1. reboot to CWM recovery
2. factory reset
3. wipe cache
4. advanced/wipe dalvik cache
5. flash Rom zip
When you flash a Rom over another Rom without a full wipe (the little procedure above), you may face issues like FCs, old Rom components still present, random reboots and whatnot. I'm not saying these problems have to happen, but they may.
I actually just wiped mine. I switched the CSC to match the ROM I'm using. I was hoping this would get Kies to talk to it. I don't know why I'm so obsessed with making things work as the manufacturer intended!
Restoring stuff now.
Well there are no apparent benefits with KIES recognizing your device and force updates on them, coz doing so would "unroot" your phone.
So if you want to keep root, just download the stock ROM and use CWM manager to flash it. And this definitely is not how the manufacturer intends it to be, because he never wants you to be "root" in the first place.
Please Help me ID
Hello, I got a SAMSUNG G-NOTE (MODEL: GT-N7000 SSN: N7000GSMH FCC ID: A3LGTI9220 S/N: RV1C22T0xxx 12.0 2(I think this last number is the fabrication date)) it is not rooted, has stock ROM, and I don´t know what android version it has, but the first day I got it, I don’t know how, I don’t know why, may be my little son had did something, now when I turn it on it ask me for password, so I try going into recovery mode and I select “wipe data/factory reset” after confirm “YES. . .” it also ask me for a “Confirm password”, I Also tried: *2767*3855# . . . and “adb shell >> recovery --wipe_data” but almost all commands said access deny. . . I would like to upload a stock firmware may be it fixes it, I found a page (mobilecon.info/samsung-galaxy-note-firmware.html) with a lot of firmware for GT-N7000, but I don’t know what is the right for me, I am fear to brick my device, I had Google for a way to identify the device, but unsuccessfully, please anybody can help me, Thanks, Regards
first > download a GB rom (2.3.6) from samfirmware.com. extract the zip and you will get a tar.md5 file. The download Odin 1.85 and open it on pc. Put the phone in download mode (vol dwn+pwr+home and then vol up to continue) . you will get a downloading screen. at this stage. connect to pc. COM:X should come in yellow. (if not, drivers are missing on the pc. (install kies or samsung USB drivers) select the PDA tab in odin and select the tar.md5 file. donot change any other settings in odin. press start to flash
once done, phone will boot. bot into recovery and do a wipe data/factory reset.
Make sure not to do any wipes while on stock ICS kernels.
Thanks
nokiamodeln91 said:
first > download a GB rom (2.3.6) from samfirmware.com. extract the zip and you will get a tar.md5 file. The download Odin 1.85 and open it on pc. Put the phone in download mode (vol dwn+pwr+home and then vol up to continue) . you will get a downloading screen. at this stage. connect to pc. COM:X should come in yellow. (if not, drivers are missing on the pc. (install kies or samsung USB drivers) select the PDA tab in odin and select the tar.md5 file. donot change any other settings in odin. press start to flash
once done, phone will boot. bot into recovery and do a wipe data/factory reset.
Make sure not to do any wipes while on stock ICS kernels.
Click to expand...
Click to collapse
Hello, Thanks for reply does that anwer was for me? if yes I am still worry about what rom should I download would any of those work?
Yes any GB rom for N7000 will work
lol, people
your on gn, first find product code, use the google search. The one that brings up sell code.
Now you have your pcode, that tels you what device
then dial and note your emei
*#06#
then with your emei
*#272*yourimei#
Now you have csc.
Whatever you do. If you root or plan to flash roms, backup your efs, on and off the phone.
Dont wipe on ics/jb because of brickbug. This includes changing csc, factory reset etc
Sent from my GT-N7000 using Tapatalk 2
Thanks
Thanks so much for replies I will try. Regards.
Related
Hi!
First of all, I thank you all devs doin so much work on these forums, I am going to donate to most of you developing for my phone. I am new to Android (coming from symbian, FINALLY!!). Maybe this helps, I used to read these forums regarding flashing, ROMs, MODs, etc, it didn't make sense till I purchased this SGN. I have little knowledge. So...
I've installed Titanium Back-up Pro (yes I payed for it) then this asked for root access, then I installed/flashed this kernel with root, CWM, Super User and other stuff.
Everything seems fine so far, Titanium says it's ok, I back-ed up all stuff with it.
My questions are:
1. I want to know if this change will remove completely my Samsung warranty? (the author of the modified kernel says that Samsung can track changes done to the sys files like kernel)
2. If Yes, this also mean I cannot update the firmware via Kies anymore?
3. Is there any possibility that the kernel I use to get updated? Does this mean it could conflict with some new firmware version (If I manage to get it updated)?
4. If I update the firmware (if possible considering existing situation), will this put back the original kernel? Is there any side effect?
Please take a minute to understand my concerns. I payed quite some $$.
Danny
dnp_sgn said:
Hi!
First of all, I thank you all devs doin so much work on these forums, I am going to donate to most of you developing for my phone. I am new to Android (coming from symbian, FINALLY!!). Maybe this helps, I used to read these forums regarding flashing, ROMs, MODs, etc, it didn't make sense till I purchased this SGN. I have little knowledge. So...
I've installed Titanium Back-up Pro (yes I payed for it) then this asked for root access, then I installed/flashed this kernel with root, CWM, Super User and other stuff.
Everything seems fine so far, Titanium says it's ok, I back-ed up all stuff with it.
My questions are:
1. I want to know if this change will remove completely my Samsung warranty? (the author of the modified kernel says that Samsung can track changes done to the sys files like kernel)
2. If Yes, this also mean I cannot update the firmware via Kies anymore?
3. Is there any possibility that the kernel I use to get updated? Does this mean it could conflict with some new firmware version (If I manage to get it updated)?
4. If I update the firmware (if possible considering existing situation), will this put back the original kernel? Is there any side effect?
Please take a minute to understand my concerns. I payed quite some $$.
Danny
Click to expand...
Click to collapse
1.Rooting voids the warranty, but good thing, flashing back to stock, you regains warranty.
2.You can update via kies (If your currant firmware same as it shud be for your country, b'coz if you manually update newer firmware, which was not released over kies in your country, Kies wont recognise and so you cant update) but, You will lose Root + CWM
3.Usually you will get newer kernel according to your firmware from thread you have used early. But to be practical almost newer near release kernel works for others. e.g. I am using CF Root KL7 for LA4
4.It depends on the way you are updating, If tou update over Kies OR with PC Odin, it will replace with original Kernel. Too keep Rooted n preserve CF root Kernel, you have to use Mobile Odin/ CWM to update firmware.
You may get details of updating newer firmware here
http://forum.xda-developers.com/showthread.php?t=1424997
go through post#2 n 3 in detail
Excellent!
Thanks for your quick reply!
Sounds like you have the freedom to do all around upside down: go "illegal", go back to legal, but there seem to be more for me to understand:
Ok, suppose I proceed with update via Kies, I loose ROOT and CWM. Then, if I want to put back the root and the CWM, I need to find one compatible and it's not going to be for the same KKA I have right?
1. If your device is rooted then the their is so warranty.
2. Yes.. you will not get updates from Kies. (if you are rooted)
3. You can flash Official ROM and Kernel via PC Odin. (Warranty Revoke)
4. you have to flash Official PDA, PHONE, CSC Via Odin PC.
Then you ll get complete Official warranty. Be careful while flashing. Read everything.
Follow this thread for more details about flashing and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1424997
---------- Post added at 02:42 PM ---------- Previous post was at 02:42 PM ----------
Doc u too fast..
I don't fully understand this new language, it's a bit confusing.
Anyway, I am now trying to connect Kies and it does not allow it initiated from computer, but from the phone itself, via browser.
dnp_sgn said:
I don't fully understand this new language, it's a bit confusing.
Anyway, I am now trying to connect Kies and it does not allow it initiated from computer, but from the phone itself, via browser.
Click to expand...
Click to collapse
If you are rooted the device then you cant update from Kies. Just forget about kies.
if you want update device, download Firmware from above mentioned thread and extract it.
you should get 3 files.
Download Odin from the same thread.
Open Odin Attach those 3 files as mentioned in thread.
(i.e : PDA= CODE_xxx , PHONE: MODEM_xxx, CSC: CSC_xxx)
UnTick Re-Partition and leave Auto Reset and F.Reset time ticked.
1. turn off your device .
2. Put device in download mode by pressing Volume Down + Home + Power hold it for 3 - 5 seconds.
3. Device will prompt you to press volume up to continue and volume down to cancel. just press volume up then you can see Downloading mode screen.
4. Connect your data cable to device and PC.
now you can see yellow colored block on Odin and shows "Device Added".
5. Click start. Thats it wait until it restarts.
Thanks again, excellent!
dnp_sgn said:
Thanks again, excellent!
Click to expand...
Click to collapse
after install feedback...
Goodluck..
I will give you feedback once I have the chance to update, my phone has the latest update now.
dnp_sgn said:
I will give you feedback once I have the chance to update, my phone has the latest update now.
Click to expand...
Click to collapse
Ok now I understand there is a new update XXKKA but it's not available for Mobiles in my country, but it's available in Germany (everytime they have it first).
I will purchase a MicroSD in the next couple of days and back-up my apps and user data, then I will try to flash this latest firmware XXLA4.
I hope I can upgrade firmware with CWM so I can keep my data, my accounts, my apps and settings.
My question is now, my firmware now is XXKKA (my phone says it's the latest), is there any conflict with this latest XXLA4 or maybe kernel issue? I don't know much about these, I am just concerned.
dnp_sgn said:
Ok now I understand there is a new update XXKKA but it's not available for Mobiles in my country, but it's available in Germany (everytime they have it first).
I will purchase a MicroSD in the next couple of days and back-up my apps and user data, then I will try to flash this latest firmware XXLA4.
I hope I can upgrade firmware with CWM so I can keep my data, my accounts, my apps and settings.
My question is now, my firmware now is XXKKA (my phone says it's the latest), is there any conflict with this latest XXLA4 or maybe kernel issue? I don't know much about these, I am just concerned.
Click to expand...
Click to collapse
Here one think you should notice that LA4 is an official update for only some regions. it means if the LA4 dint released in your region , Kies wont Support LA4 too even it is an Official.
I suggest you to update to LA3 , any way ICS will be releasing soon for our Note. and Don't bother about Kies update. more over in this ROM you ll get warranty too.
Thanks again man, I guess you will be assisting me at that time
dnp_sgn said:
Thanks again man, I guess you will be assisting me at that time
Click to expand...
Click to collapse
any time....
I think I have an idea, what if we will work together to do a documentation here on how to do it, you help with the know-how, I help with the copyright (I used to write documentation, so my language will be clear as the blue sky ).
Hello all,
During my travels in China, I picked up a GT-I9228G galaxy note.
Back in the UK now, and hoping I could change the rom to the english varient of GT-N7000? I am assuming GT-I9228G and GT-N7000 is the same device, just different regional roms(?).
The boot screen is chinese. It has chinese apps on it which I cant remove and no app store amongst other things. Ideally, would like to make the phone all english. Is this possible?
Just a bit of background on me:
I used to own a HTC PDA which I swap roms from developers here and very familair with jail breaking on apple products. Andriod however is new to me. I am a quick learner, so any pointers would be great please guys/gals.
mrharrod said:
Hello all,
During my travels in China, I picked up a GT-I9228G galaxy note.
Back in the UK now, and hoping I could change the rom to the english varient of GT-N7000? I am assuming GT-I9228G and GT-N7000 is the same device, just different regional roms(?).
The boot screen is chinese. It has chinese apps on it which I cant remove and no app store amongst other things. Ideally, would like to make the phone all english. Is this possible?
Just a bit of background on me:
I used to own a HTC PDA which I swap roms from developers here and very familair with jail breaking on apple products. Andriod however is new to me. I am a quick learner, so any pointers would be great please guys/gals.
Click to expand...
Click to collapse
I guess you could... Lots of other people bought their galaxy note from Hong Kong and also from china and they all changed their ROM for a same reason of yours.
Does not the 9220 using a snapdragons and not exynos? I not sure but I thing I have read it somewhere so carefully before flashing.
Sent from my GT-N7000 using Tapatalk
So, potentially I could just change to the one below?
N7000XXKKA ## 2.3.6 2011 November N7000CPWKK3 United Kingdom (Carphone Warehouse) Download
The box says 1.4 + <insert chinese characters here>
From wiki -A dual-core 1.4Ghz Exynos processor or a 1.5 Ghz Snapdragon S3 processor (AT&T, SK Telecom, KT, LG U+)
So my guess is Exynos. Anyway to double check?
ok, so I have downloaded the above rom and Odin3 v1.83 from sammobile.
I have opened Odin3 and specified the PIT file (Q1_20110914_16GB)
I have also ticket re-partition, auto reboot and F.reset timer.
I have loaded the rom under PDA (N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar), everything else is unticked.
I have the phone in download mode ready.
I just need to know if the above is ok or am I missing anything before I click START and brick my phone?
Thanks,
Chris.
well I tried anyway.
That didnt work.
Now the phone says "software update fail"
I can still get into download mode, buts thats about it.
tried with and without the PIT file.
Anyone know what I should do now please?
I'd say you'll have to find a rom for that model
maybe http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9220&r=2#regiona
You might have bricked your phone by checking repartition in odin. You should not have. Now you probably need to find a pit file for your model.
Sent from my GT-N7000 using Tapatalk
mrharrod said:
well I tried anyway.
That didnt work.
Now the phone says "software update fail"
I can still get into download mode, buts thats about it.
tried with and without the PIT file.
Anyone know what I should do now please?
Click to expand...
Click to collapse
If you could enter download mode then try these steps
1. Open Odin and flash Pit file only and Re-partition ticked. (do not attach any ROM)
2. After this again flash ROM without pit file and re-partition un-ticked
This should work.
ranjan.alva said:
If you could enter download mode then try these steps
1. Open Odin and flash Pit file only and Re-partition ticked. (do not attach any ROM)
2. After this again flash ROM without pit file and re-partition un-ticked
This should work.
Click to expand...
Click to collapse
Thanks,
The first part seemed to work ok, so then went onto flashing again without the PIT file. Failed
Back to square one (software update fail message).
Going to try the original ROM, but takes about 6 hours to download from china!.
Ideally, really dont want to use the original ROM though! I'm guessing the original ROM isnt going to work now anyway since ODIN3 has re-partitioned the device(?).
victorlht88 said:
god, you can't flash n7000 roms on the china note, you will surely brick your phone and good luck.
Click to expand...
Click to collapse
You're wrong. Several have tried and it's working perfectly with n7000 roms on i9220 phones.
Sent from my superior GT-N7000 using Tapatalk
I am also doing this on a macbook via Boot camp (windows partion). Maybe it has a problem with that. Will try it on a normal PC too.
Any other suggestions before I head home from work and play later?
Oh, I forgot to mention. I read somewhere (forgot where) that I should root the device prior to changing the ROM. Is that true? If so, I dont think thats something I can do in current state
mrharrod said:
Thanks,
The first part seemed to work ok, so then went onto flashing again without the PIT file. Failed
Back to square one (software update fail message).
Going to try the original ROM, but takes about 6 hours to download from china!.
Ideally, really dont want to use the original ROM though! I'm guessing the original ROM isnt going to work now anyway since ODIN3 has re-partitioned the device(?).
Click to expand...
Click to collapse
you can try flashing kernel with CWM in PC Odin, then flash any Custom ROM using CWM Recovery.
ranjan.alva said:
you can try flashing kernel with CWM in PC Odin, then flash any Custom ROM using CWM Recovery.
Click to expand...
Click to collapse
CWM is clockworkmod right? Dont I need a rooted phone in order to install it?
Or do I follow something like this? http://whatareandroidphones.net/root-samsung-galaxy-note.html
Yes... CWM recovery doesn't need root.
hello,
Didnt have the time to work out CWM, but was given a link to another rom which had three files for ODIN3 (http://hotfile.com/dl/149302861/1896440/N7000XXLA6_N7000XEULA1_XEU.rar.html).
So, loaded the above and the phone is back in action on a N7000 rom. Wohoo. Just glad it's working again more then anything else lol!
This rom is prerooted apparently too. know idea what I should be able to do now. What does one usually do when they have a rooted device?
mrharrod said:
hello,
Didnt have the time to work out CWM, but was given a link to another rom which had three files for ODIN3 (http://hotfile.com/dl/149302861/1896440/N7000XXLA6_N7000XEULA1_XEU.rar.html).
So, loaded the above and the phone is back in action on a N7000 rom. Wohoo. Just glad it's working again more then anything else lol!
This rom is prerooted apparently too. know idea what I should be able to do now. What does one usually do when they have a rooted device?
Click to expand...
Click to collapse
Thread accidentaly revived :S
galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
well he said he`s just using stock, there`s really nothing us stock people can do? mines from saudi arabia, i find the rooting, and stuff kind of confusing for me so i dont wanna risk it
There are stock multicsc. Without root you can flash it throught pc odin. Then you can update after changing csc or flash the rom you want emediately
All at own risk
Sent from my GT-N7000 using Tapatalk 2
try using kies samsung.com/kies
baz77 said:
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
zexco said:
well he said he`s just using stock, there`s really nothing us stock people can do? mines from saudi arabia, i find the rooting, and stuff kind of confusing for me so i dont wanna risk it
Click to expand...
Click to collapse
patience people, just follow what the dude above said. I am from the Philippines but my csc is from Poland (xeo).
same issue
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
qazibasit said:
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
Click to expand...
Click to collapse
See my post above, only thing you can do is wait for csc arabian ics, or change csc.
Reposted steps, you will lose data.
Download stock gb rom from country which has csc and ics. Flash it throught pc odin. Perform factory reset from dialer. Change csc with steps I posted before. To make sure right one is selected.
Then update throught kies or if available ota. If no update is available, screw it and download ics rom, flash through pc odin, do not select repartition if you dont have pit file. Do not select clear efs.
Extra info:
I cs or gb rom stock roms, unzip them, should be single tar. Md5 file. In pc odin put these in pda. For flashing phone needs to be in download mode. Press volume down, power and home button simultaniously and keep pressed when phone is booting. Then when it shows download mode connect to pc and open odin. Sometimes takes couple tries press volume button up to confirm dowload mode. Now you can start
Flashing. It takes some time, do not disconnect phone. Wait till odin says passed.
Now you have lost warrantee, all at own risk, but upside you could have working ics. Note do not restore backups as they will most likely cause battery drain and errors.
Do not ever perform reset or factory reset from ics, with any app, not even samsung cause it could brick your phone.
If this helped you can donate to my favourife devs neobuddy, xplodwild and hardcore and Imilka
Find their details in stunner rom, cm9 rom and speedmod developers thread. And paranoid android
Sent from my GT-N7000 using Tapatalk 2
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
regards
Thanks for the info..,am still working on it.
im pakistani aswell, upgraded my phone to the official german ICS (LPY) via PC Odin, everything is working great!!!
mirasifbaloch said:
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Can you link us to the instructions you used to do this maneuver?
thanks.
I'm in the USA and stock international version and dont know the CDC.
thanksagain
arham93 said:
galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Click to expand...
Click to collapse
I am wondering if you update using OTA or kies? This ics needs to be updated using kies pc to phone using usb cable.
Sent from my GT-N7000 using XDA
if u are using phone update~u will get no update for ics~pls use kies on pc to update your note to ics,this is working
Guys, Im sorry you find rooting and such hard.
I installed ICS and I love it. Its very nice and havent found anything wrong with it.
Now, this method I am going to show you will put ICS ontop of your Gingerbread, so you will keep your settings, apps and other things. Its easy and only a few things to do, so, lets get started:
Download the ICS rom (hong kong): HERE
Then copy it to your phone
Now for rooting:
Download the Files first and put in your SDCARD CWM, SU-BusyBox
Reboot to recovery (hold vol up, power and home)
Choose and apply the CWM update.
Then do the same with SU.
Choose and Install SU-Busybox-Installer.zip
You are now rooted.
Reboot.
Download and install Mobile Odin.
After installing this, open it and grant it superuser permissions.
Scroll down to open file, select your file and press ok.
Select inject enable everroot, and everything below it, then press flash firmware.
Do a MD5 check if you wish (dont have to, but it is best).
Then after 2-3mins, it should install and reboot.
After reboot, it will take ~5mins to startup as the applications need to be altered for ICS.
So, hopefully, you did that right and now you have ICS!
(Credit for these files go to dr.ketan)
(More information on rooting: Here)
mirasifbaloch said:
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
How did you do that ? My CSC code shows its from Poland. Will changing the CSC code to Germany will make it get the update ?
Or if there is any other way please do tell.
Actually flashing a ROM is not that difficult. Just follow what the senior member's post. Follow step by step and you will lead to success. Try few more times and you will be used to it. Don't worry about the binary count as we can reset the binary count using Triangle away and binary reset.
I flash my SGN more than 15 times, keep flashing till I get the fastest ROM I wanted. From GB, German ICS, CM9, Rocket ROM, Criskelo, Litening ROM..
Now I stick to KingDriod. This ROM is damn fast.. Can give it a try..
Cheers..
No need to apply roms
arham93 said:
galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Click to expand...
Click to collapse
qazibasit said:
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
Click to expand...
Click to collapse
guys ..this is what I did....It worked for my friend too....I had a problem....Wifi was not working for me...i gave my note to the service center.....they checked and said...there is no problem with wifi....and he said...I can update to ICS if you want??....my eyes was like ...asked him to update....tats how i got it..i said to my friend...he also got the update.....try that...
i tried using kies but no use....still shows that gingerbread is latest firmware.....i dont want to root my phone.....
Bro
I am also from Pakistan.
Had flashed german rom on my note and wiping data/factory reset has bricked my phone.
Teletec the official distributor and service provider of samsung in Pakistan has no clue how to restore my phone!
So dont risk your phone.
I recently went from custom ICS roms to stock gingerbread. I am having troubles trying to get the phone to update through wi-fi and Kies. When I try to update on the phone through wifi it says there is "no software update available". When connecting the Note with Kies it says "Your device does not support software upgrading via Kies". Anyone else had this problem?
The ROM I flashed via ODIN is:
N7000XXKK9 ------ 2.3.6 2011 November------- N7000OXAKK9 -----------------Germany (Debitel) -------------------
I know I can just update via ODIN but I would like OTA updating to work.
Download OPEN Germany from three followinf link and you will have no issue with OTA
just flash 4.0.4 direct...since you are already on GB
do you need root? If so then instead flash the pre rooted GB rom on the same page... and yoi can use mobile odin then to wipe flash the 4.0.4 with everroot and supersu... That is what i would do...
Be sure to use a safe kernel if you plan on doing any wipes on ics
http://forum.xda-developers.com/showthread.php?t=1424997
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
Sent from my GT-N7000 using Tapatalk 2
Well I forgot to mention that I did flash the 4.0.3 Open Germany version before. When I did that it still did not detect an update. Would that be fixed with the 4.0.4 version?
search preconditions for updating. Dont remember where I posted them, but of can comply to those it shouldnt be an issue
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
search preconditions for updating. Dont remember where I posted them, but of can comply to those it shouldnt be an issue
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Well I read your preconditions and am not sure if I have everything correct. All I've done is flash the 4.0.4 stock ROM with Odin and still get the problem with Kies. Is there more I need to do?
why dont you keep updating via odin, Its faster then Kies.
Sent from my GT-N7000 using Tapatalk 2
I'm currently trying to sell the phone and the buyer may not want to do it that way. Rather than through Kies, I'm hoping to just get updating through the phone to be working. But I could just tell them to update through Odin if no solution is found.
Anyone have a solution to this problem?
Go by them one by one and eliminate them. If you cant figure one out, then ask
preconditions for update ota/kies
No root(for ota it doesnt matter)
All codes intact (imei, pcode)
All components installed of same rom and version of rom that was distributed through Kies or ota.
Rom csc must match the installed rom. Most updates aren't available because for phone csc there is no update. This is the csc obtainable throught dialing *#06# for imei then dial *#272*yourimeihere#. Note changing csc triggers factory reset, so do from save kernel should you like to change.
Sent from my GT-N7000 using Tapatalk 2
have you reset your counter binary ?
Okay, now I feel dumb. Guess every problem/fix isn't always so technical. Believe problem was the wrong country/region was selected on the Samsung agreement and hadn't changed until I did a factory reset.
Okay, so I guess that wasn't the problem. A Singapore ROM had just happened to work while the others did not.
Edit2: Dudes remember do resets wipes only on safe kernels... Best done from gb.
Edit: made a way that could work for yah. Checking preconditions with some of the how to is a must. It saves following procedure. Anyway if you get stuck, follow this advice.
A way to get updatability functional throught Kies/OTA.
Restore efs backup of condition when first bought phone.
If none made, root phone and make one now safe multiple locations. (of the phone)
Then, if you know csc phone came with, download a rom for that csc, earliest gb possible, one that was distributed throught Kies or Ota. See www.sammobile.com for that. it shows a kies logo next to the rom in the firmware section. That is the one we are looking for. Should have in the zipfile a single tar file.
Now get a standard pit file and flash throught pc odin the rom with the pitfile. See dr ketans thread in sticky section development for that on how to do it. Do this all without external sd card or simcard in phone, never select clear efs in pc odin.
If phone doesnt reboot head into recovery and factory reset and clear cache. Reboot. After phone reboot dial *2767*3855# for ultimate factory reset. Do not change anything to the rom, no cf or modded kernel or different modem. You will lose all data.
Now after this completes,
Check imei, check csc as described earlier. All intact and inline with rom? Good, if not, select the csc of the rom press instal and let phone reboot.
Now check pcode:dial *2767*4387264636# this should be same as rom, and filled in. Pcode correct? Good.
Now you dont have root, codes correct, and an updatable rom.
Hook up to Kies and or ota update it!
You might need to check with different versions of roms(preferably gb to be safe). I found some weren't directly updatable, dont know why.
Notes
If imei is gone, reflash efs backup,
If nulls on entry with keyboard select the tar file in pcodin in cache and flash)
If pcode different, you can change, but search on how to edit it on computer with hex editor. Pm me if this is the case. I hope not. In the end its easier to start over with a rom matching that pcode that is there and selecting the coresponding csc
ps I have done this multiple times, all based on experience and countless hours figuring out how to fix it so I have way back should I want to sell phone in working condition.
All at own risk, I am trying to help, but can't guarantee anything, what worked for me may not work for others
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 01:17 PM ---------- Previous post was at 01:14 PM ----------
seraphus said:
Okay, so I guess that wasn't the problem. A Singapore ROM had just happened to work while the others did not.
Click to expand...
Click to collapse
huh, what do you mean work?
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
antique_sonic said:
have you reset your counter binary ?
Click to expand...
Click to collapse
good point, I asume in my procedure count is 0, if not find way to make it 0, something with triangle away I think. Not sure.
Sent from my GT-N7000 using Tapatalk 2
I have been able to update from kies 3 times now, but last release just doesn't work.
My original CSC was ZTA, then I changed it to DBT when it was on 2.3.5 (GB).
Kies let me update from 2.3.5 to 2.3.6 to 4.0.3, then to 4.0.4 (I am currently on XXLRK, CSC DBT).
Now, kies says:
Your device does not support software upgrading via Kies.
Current firmware version: N7000XXLRK/N7000DBTLRK/N7000XXLRK/N7000XXLRK (ZTA)
How does it know my device was originally ZTA?
Why have I been able to upgrade via Kies so far and last update Kies says I can't upgrade?
Thanks in advance.
Kies has an update of itself as well from time to time and it retains and detects your very original copy of your ROM in its system (before you change your csc to DBT- Germany?)
Comparing it with the initial(checksum) and with your latest ROM upgrade, KIES sees some anomaly on your latest ROM (since its not on the right tree path), therefore its telling you now, your latest ROM is not supported anymore.
You were able to fool the software before.. but it's not going to be fooled second time already. Either you can revert back to your original CSC and upgrade it again thru kies (on the right tree path) or the second option would be to use PC /mobile Odin from now on to upgrade (to the firmware/ROM of your choice).
Or you can clean install kies, take out all registry keys files etc. But thats to much hastle
Sent with L0VE&CΔRE
baz77 said:
Go by them one by one and eliminate them. If you cant figure one out, then ask
Rom csc must match the installed rom. Most updates aren't available because for phone csc there is no update. This is the csc obtainable throught dialing *#06# for imei then dial *#272*yourimeihere#. Note changing csc triggers factory reset, so do from save kernel should you like to change.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hello All, Just would like to share ... I just bought a 2nd hand note, later I found my note is german rom ie; N7000XXLPY/N7000XXLPT/N7000OXALPY is 4.0.3, because when I try to update through kies ..it saying not support....
So I try to change CSC ..there are many and I dont know which one work ..got EXU..., after change one CSC ..then plug in PC run kies .. finally until I changed DBT ..it show got update .. So the above statement is right ...
once I update it to 4.0.4 and would like to change back to KOR (I think mean for asia), all the CSC code gone ... now there are fews icon which is not supported but everything is fine.
I hink if you have open rom ..better dont update through kies .. it will wipe out all CSC .. Now I have to find my country stock rom with CSC to flash in.....
tsfatt said:
Hello All, Just would like to share ... I just bought a 2nd hand note, later I found my note is german rom ie; N7000XXLPY/N7000XXLPT/N7000OXALPY is 4.0.3, because when I try to update through kies ..it saying not support....
So I try to change CSC ..there are many and I dont know which one work ..got EXU..., after change one CSC ..then plug in PC run kies .. finally until I changed DBT ..it show got update .. So the above statement is right ...
once I update it to 4.0.4 and would like to change back to KOR (I think mean for asia), all the CSC code gone ... now there are fews icon which is not supported but everything is fine.
I hink if you have open rom ..better dont update through kies .. it will wipe out all CSC .. Now I have to find my country stock rom with CSC to flash in.....
Click to expand...
Click to collapse
yep that sucks good luck!
Kor is default csc for I think Asians rom, or Korean. If csc of phone is not present it defaults to a default csc in rom. Its funny.
Messed up many times. Be safe
You can select your choice csc rom tar file in cache in pc odin, flash and then its selectable, be on safe kernel or gb rom just in case
Hello everyone, I have what I hope to be a quick question. I'm pretty new to Samsung devices, I've had tons of rooting experience but mostly with Nexus phones and HTC, my last Samsung was my Galaxy S3. I just bought a N920I unlocked of swappa.com that I'm going to use on AT&T. The seller noted that it is already rooted with a custom ROM on it. When I get it I want to flash back to complete stock, but I'm not sure exactly what firmware to flash, I know how to use Odin, but there are tons of different firmware versions on sammobile here http://www.sammobile.com/firmwares/database/SM-N920I/ and I'm not sure which one to flash. After I go full stock I'm only really interested in rooting and running Xposed, maybe a custom kernel, at least until I get the hang of this device more, should I just flash the newest one? I've heard that I shouldn't flash one that has anything to do with a carrier, the newest one AOL2 but it says that is for Vodafone? I've tried looking around in the General and Q&A sections but can't seem to find a definite answer.
You can download from Sammobile if you like, but it will take awhile if you do not have their premium service. I recommend using Samsung Kies. I have a N920I that I use on ATT and this is what I did . . . .
Place the phone in download mode, open Samsung Kies 3 (ignore the not compatible popup), click Tools, then Firmware upgrade and initialization, Model : SM-N920I (include caps) , and then put in your serial. It will let you know that its going to restore the phone to factory and wipe the data, etc.
I don't have any issues with cell service, data, etc on OL2. I did not even need to manually set up the APN.
147aaron said:
You can download from Sammobile if you like, but it will take awhile if you do not have their premium service. I recommend using Samsung Kies. I have a N920I that I use on ATT and this is what I did . . . .
Place the phone in download mode, open Samsung Kies 3 (ignore the not compatible popup), click Tools, then Firmware upgrade and initialization, Model : SM-N920I (include caps) , and then put in your serial. It will let you know that its going to restore the phone to factory and wipe the data, etc.
I don't have any issues with cell service, data, etc on OL2. I did not even need to manually set up the APN.
Click to expand...
Click to collapse
Awesome, thanks for the info. After that it'll be set back to factory right? With it already being rooted and on a custom ROM I have no idea what all the guy before me has done to it and I just wanna start fresh. Then after that, from what I've read, I can just use Odin to flash TWRP right?
zacharyt86 said:
Awesome, thanks for the info. After that it'll be set back to factory right? With it already being rooted and on a custom ROM I have no idea what all the guy before me has done to it and I just wanna start fresh. Then after that, from what I've read, I can just use Odin to flash TWRP right?
Click to expand...
Click to collapse
Yes, you will be back to stock. You could even go the extra mile by booting into recovery and wiping the System, Data, Caches, and Internal storage before using Samsung Kies, but that isn't necessary (kinda overkill because kies should wipe it). I understand, I would wipe it and everything too.
When ready to root, follow @dr.ketan post here - http://forum.xda-developers.com/note5/general/how-to-root-note-5-t3205073
There is also a link for Xposed in there. If you want xposed, download the SDK22-ARM64
Check the baseband in the settings. That will tell which firmware to download, because there are a lot for the 920I. Sammobile is the fastest place I could find firmware available... 300 kb/s max speed unless a donor.