Hello guys
i have to send in my Note in order to receive a replacement because it has some display issues.
I am currently on Rocket Rom ICS 1.5.
How can i unroot and delete all signs of the root and custom roms to keep my warranty?
Thanks in advance.
Just Flash latest available firmware for region using PC Odin. and Make sure there is no Yellow triangle and make sure your binary count is ZERO
ranjan.alva said:
Just Flash latest available firmware for region using PC Odin. and Make sure there is no Yellow triangle and make sure your binary count is ZERO
Click to expand...
Click to collapse
I just installed the stock rom. How can i check the binary Counter and how can i reset it?
the_deadliner said:
I just installed the stock rom. How can i check the binary Counter and how can i reset it?
Click to expand...
Click to collapse
Turn off your device completely. Hold Volume down + Home + Power for 5 Secs. Then it ll boot into download mode, Now press volume up button for Download mode confirmation. Now you are in download mode. on the left top corner you can see details about your phone. and it should be like below image (This is image of S2, But it looks like same as in N7000 also)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ranjan.alva said:
Turn off your device completely. Hold Volume down + Home + Power for 5 Secs. Then it ll boot into download mode, Now press volume up button for Download mode confirmation. Now you are in download mode. on the left top corner you can see details about your phone. and it should be like below image
Click to expand...
Click to collapse
Ok thank you, it is like the image. But before i confirm the volume up, i see a yellow triangle bellow with a "!" in it
the_deadliner said:
Ok thank you, it is like the image. But before i confirm the volume up, i see a yellow triangle bellow with a "!" in it
Click to expand...
Click to collapse
Ya.. Thats just a warning before entering download mode..
Related
rejanmanis said:
please help...
I used Odin3 v.1.85 ( included in the Quens_P100_EF17_ROOTED.zip )
I put Quens_P100_EF17_ROOTED_PDA.tar in pda slot.
and klik start.
But in the middle of the process, it said failed when flashing factoryfs.rfs
Now im stuck in this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
whether i pressed Power off and ON or
Vol Up + power or Vol Down + power or Vol Up+down+power
get me to that screen.
if anyone can help please. what should i do ?
Click to expand...
Click to collapse
It is also happened to me but can't get in to download mode.
-I power off the tab.
-Hold the power button+volume down but it won't even boot in any mode.
-When plugged in the power it boots itself at the screen above.
-Holding the power button+volume down button it halts.
Any ideas?
Any help would be welcomed.
Sent from my GT-I9100 using xda premium
1-Use another version of odin like 1.70, google it.
2-use the correct pit file.
3-check the file is not corrupt, one day I try to changue the kernel in the rom and odin filed to flash it.
rafaeker19 said:
1-Use another version of odin like 1.70, google it.
2-use the correct pit file.
3-check the file is not corrupt, one day I try to changue the kernel in the rom and odin filed to flash it.
Click to expand...
Click to collapse
You mean that from that screen can use Odin?
Sent from my GT-I9100 using xda premium
Thanks men! Odin 1.70 did the trick. Thanks again everybody!
Sent from my SPH-P100 using xda premium
For anyone else who happens across this thread, you might also want to try Heimdall which is sometimes more reliable at getting past the exclamation-mark-PC-screen problem. Worked a charm for me, at least.
Yep Heimdall is good, but just make sure you put the files in the right place..... Paperweights can be bought much cheaper....
I'm working on a Galaxy Note 5 that I am trying to reset the firmware on. Someone's installed a custom build (that's verified in the "about phone" details) and it co-opts the volume down button boot sequence, so I can't get into download or safe mode. I've attached a screenshot. Has anyone seen this before and how to I purge this thing?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your image isn't showing.
Image not showing
Ok, let's hope this works as a link to the image:
This happens with the power-volume down and power-volume down-home sequences, so I can't get it into safe mode. Someone's definitely put a custom image on, but I'm not sure how to clean it/replace it.
The power-volume up sequence works fine, but since this is a custom image, it won't get cleaned off by wiping the cache and/or factory reset.
Apparently, since I'm a newbie here, I can't post external links, which makes the forced external URLs for images a little useless to me right now...
Can't you just power off, boot into download mode and Odin a stock firmware, then re-root after?
blud7 said:
Can't you just power off, boot into download mode and Odin a stock firmware, then re-root after?
Click to expand...
Click to collapse
That's the thing - whoever did this co-opted the sequence to boot into download mode - power + volume-down/power + volume-down + home. I did find a way to do it without needing to go into boot mode, but I can't post the link here because I'm a newbie! That should solve my problem - I'm just setting it up on Linux and I'll keep people posted on the solution.
What's happened is that someone's basically done a custom firmware/kernel combo that makes it impossible to get into download mode, so you have to totally backdoor it. When I get it working and verify it, I'll post the solution here.
Hi ALl,
Like many others I'm also facing this Discoloration issue on my Note 9. So wanted to flash stock ROM on my device. I have downloaded stock ROM using FRIJA app and tried to flash that ROM. However, I'm unable to enter into DOWNLOAD MODE. I'm following this thread currently.
as per instructions, Switched Off my mobile and I have connected my cable to device then holding BIXBY + VOLUME DOWN button connecting cable to my PC. Instead of going into Download Mode Its getting charging there. As it was switched off, simply showing battery percentage.
Please help me to get it done if I'm doing anything wrong here.
PS: As mentioned in thread I haven't switched on developer options & USB debugging mode.
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Signup said:
Hi ALl,
Like many others I'm also facing this Discoloration issue on my Note 9. So wanted to flash stock ROM on my device. I have downloaded stock ROM using FRIJA app and tried to flash that ROM. However, I'm unable to enter into DOWNLOAD MODE. I'm following this thread currently.
as per instructions, Switched Off my mobile and I have connected my cable to device then holding BIXBY + VOLUME DOWN button connecting cable to my PC. Instead of going into Download Mode Its getting charging there. As it was switched off, simply showing battery percentage.
Please help me to get it done if I'm doing anything wrong here.
PS: As mentioned in thread I haven't switched on developer options & USB debugging mode.
Thank you
Click to expand...
Click to collapse
Press vol down + bixby with one hand and use another hand to plug into usb.
Rosli59564 said:
Press vol down + bixby with one hand and use another hand to plug into usb.
Click to expand...
Click to collapse
Thank you issue was solved now. Problem is my Spigen case which is not letting me to hold those keys properly. Without case its worked. Thanks for the reply though
Hello,
I'm new to everything here, patience is appreciated.
I'm trying to find stock Samsung firmware for a Samsung S10. i can not seem to find the appropriate version of firmware that corresponds to device IMEI/Model/sku/SN
I am located in Canada and none of the values offered give me the confidence to continue with the process of flashing the stock firmware.
I have attached a screenshot of the barcodes displayed by device
Welcome to XDA
Once you upload an image you need to choose thumbnail or full display on the image for it to appear in your post.
You might want to blur that IMEI number more, it's extractable I think...
What's your current OS version?
blackhawk said:
You might want to blur that IMEI number more, it's extractable I think...
What's your current OS version?
Click to expand...
Click to collapse
not sure of OS version... the fone is stuck in bootloop with a light blue screen with a white triangle and exclamation point.
direction had me try 'smart switch' but software didnot provide "initialize device'...
Try powering up into the boot menu. If you can try to factory reset.
maxomillion said:
not sure of OS version... the fone is stuck in bootloop with a light blue screen with a white triangle and exclamation point.
direction had me try 'smart switch' but software didnot provide "initialize
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
blackhawk said:
Try powering up into the boot menu. If you can try to factory reset.
Click to expand...
Click to collapse
not an option... fone only powers on when plugged to charger and hen only shows previously mentioned blue screen with white triangle... stating an 'error occured during update...' ive tried various push and hold button combinations...the combination that should open odin mode brings me back to the white triangle...
maxomillion said:
View attachment 5507899View attachment 5507899View attachment 5507899
not an option... fone only powers on when plugged to charger and hen only shows previously mentioned blue screen with white triangle... stating an 'error occured during update...' ive tried various push and hold button combinations...the combination that should open odin mode brings me back to the white triangle...View attachment 5507899View attachment 5507901View attachment 5507903View attachment 5507905View attachment 5507901View attachment 5507903View attachment 5507905
Click to expand...
Click to collapse
what the hell happened there!?!?
You'll need to use odin to reinstall your "bl" file out of the firmware files. You've wiped your bootloader. Once it has that it should be a fairly easy fix. Or just go with all of them, reeinstall the firmware entirely.
Hello, i have a galaxy a40, first unlocked BL, then tried to flash TWRP via ODIN in DL mode, and now the phone is lock on "downloading screen" even if I restart.... (not possible de power off...)
Any one would have a solution please ?
Thanks
Read, it is official
https://www.samsung.com/us/support/troubleshooting/TSG01212623/
@Samarimama I have edited your post to point to the article you searched. Please don't post long links.
@bilatche What happens if you hold down the Power button for at least 10 seconds?
Samarimama said:
Read, it is official
https://www.samsung.com/us/support/troubleshooting/TSG01212623/
Click to expand...
Click to collapse
thanks, but doesn't seem to be a case/buttons issue....
V0latyle said:
@bilatche What happens if you hold down the Power button for at least 10 seconds?
Click to expand...
Click to collapse
absolutely nothing.... I have tried to recharge the phone, but still booting on DL screen....
The only solution I see : go back on last stock firmware via odin.
I will try this week.
bilatche said:
absolutely nothing.... I have tried to recharge the phone, but still booting on DL screen....
The only solution I see : go back on last stock firmware via odin.
I will try this week.
Click to expand...
Click to collapse
If you're unable to reboot the phone, this won't help you. Have you tried holding down the power button until the phone does something?
nothing with long press on power....
here is the screen appearing 1 second at boot before being stuck on DL screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will see if reinstall stock rom fixes the DL issue...
maybe it's an error due that I didn't have flashed vbmeta after twrp ?
bilatche said:
nothing with long press on power....
here is the screen appearing 1 second at boot before being stuck on DL screen:
View attachment 5926205
Click to expand...
Click to collapse
You don't have the official firmware, you need to flash the official.