hello people ,,, i have problem ,,, my G note is not connected to any cable but it gives me that its conncected and charging,, what is the problem with it ?? n how can i solve it??
msahbin said:
hello people ,,, i have problem ,,, my G note is not connected to any cable but it gives me that its conncected and charging,, what is the problem with it ?? n how can i solve it??
Click to expand...
Click to collapse
May be a bug. just restart the phone. if its still ter, take all backup and reset the phone.
hey ya i did all of what u have said man,,, but the problem still there
If your are familiar with Flashing. then download latest available firmware from the below link and flash using PC Odin. (Read all instructions before Flashing)
Download firmware from here
http://forum.xda-developers.com/showthread.php?t=1424997
hey man ,,, its not working too ,,because the device looks like its connected to the usb cable while its not ,,, so i can't even flash it the PC doesn't recognize it
Any problem with charging??
its workking i can charge it ,,, i just made the battery goes to the zero then i charged it to the full again but the problem still here
unplug your usb cable, go to system settings>wireless n network>USB utilities>connect storage to pc(make sure ur usb debugging is unchecked) Then u will asked to plug in your usb cable... then click the appeared screen btn.
i did that too ,,but its still gives me the same problem ,,, cuze i can't even use the usb mass its keep tells me that the cable is already connected while its not
not this again
Take out battery put nail varnish remover on toothbrush or something similar and give the usb port a really good clean and leave for 20 minutes to dry before replacing the battery.Moisture has got on the terminals and has oxidised its not broke but needs cleaning also dip the end of your usb charge cable in the nail varnish remover as it will have transfered from the phone port.I had to repeat 3 times but has been fine for 3 months now there are least 2 other threads with this problem,post back with results.
good luck
hey man thank you for the reply ,,,
but the phone is new,, can i install ROM with out ODIN ??? any new method ??
i just can put files to the SD card through the Bluetooth or WiFi.
so please help me ppl
Not being an expert, it sounds to me like some kind of factory fault. I would probably try to get it replaced *before* messing with custom ROMs...
it has about week here with me ,,,n every thing was fine ,,, just suddenly happened
Just do what I said problem solved bye.
ya. Its better to go for replacement.
Clean the USB port
Been fighting that with mine. A poster suggested a link and it had a photo of a dirty & clean port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Along with that, I noticed a "greenish" corrosion that was shorting the right most set of pins. I used a stiff non metallic brush, after removing the battery and scrubbed it off, then hit it with blast of compressed air.
You really need a powerful loop or magnifying glass to see it clearly.
Here's what it looked like. I found a photo of a micro-usb port and painted in
the area where the junk was.
Also, various posts suggest that using a lint free cloth with alcohol to clean
it all out. Also, it might be a combination of dust, dirt, moisture getting into the port. Perhaps a rubber plug would help?
Related
hello
I have got a problem with my xperia, the top bar shows that my stereo headset is connected but is not...therefore, i cant hear anyone who is trying to call me or i call anyone.. i have been in a vodafone store and they could not find a solution, i also have done hard reset and is still the same... now im about to flash new rom. would that be a solution or any of you got different?
please help me, thanks in advance
try connecting headset again but give it a wiggle about, not too much also try pulling it out and puting it back in quickly several times in a row. be carefull.
i tried that already, not working
after a hard reset i can only assume it's a hardware fault, so i would go get it fixed because if you flash a new rom that will invalidate your waranty.
do that in the FMradio application
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
sorry to hear that. good luck with that
last time that annoying thing happened to me i had to go to the htc HD fm radio app and plug and unplug the offical 3.5 connector to make it work( try plugging->listen to radio->set output to speakers-> then unplug)
a bunch of questions:
-what rom are you using
-did you try different 3.5 connectors
-is the earphone that caused the problem low quality?
the last time this happened to me i used the stylus and just waggled about for ages and ages and eventually the sensor registered that the headphones weren't plugged in.
do a search as plenty of people have had the exact same problem ...
good luck !
yes - just waggle the stylus around in it until it goes - worked for me
thank you..the thing with stylus works, hopefully but its still anoying to do that every time i put my headset
i have got an original vodafone uk rom
yes, i have tried many different headsets
the quality is fine
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
nottorious_91 said:
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
Click to expand...
Click to collapse
try waggling and then try inserting the headphones a few times and taking them out too
I've had the same prob for a week now.
After reading up on other HTC phones with the same issue I've found that what went wrong was a little hardware switch inside the jack failed to reset to its off position when the headphones where removed.
To locate the switch:
Turn the phone onto back so that the screen is facing upwards. The switch is at the 4-5 o'clock position if you look directly at the headphone jack, at around 1cm in.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I inserted a small pin which was bent a little at the end to relative position I have described and after I felt it snag just gave it a small wiggle. When doing this I noticed the headphone icon would disappear for a second and return.
This is how I knew I was in the correct position. Then I gave it a good twist.
(I think anti clockwise, but you will know from which direction worked when you wiggled)
The headphone icon disappeared for good and now I'm back to normal phone use!
(Do this at your own risk! But its more precise than sticking the stylus in blind)
kamilanglia17 said:
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
Click to expand...
Click to collapse
DO NOT RETURN IT. This happened to me once, and ONLY once after using the phone for like 6 months. I soft reset and nothing happened.
There is something wrong with the way the device toggled the connection. Just replug and unplug and press play and pause on your video/music player. It should purge sooner or later.
You can also hard reset your device you will find that the problem will most likely purge.
@Charcobeans: Thanks, it worked within 5 seconds Thats just the instructions I searched for. Waggling around did not work, but more precise it was easy. Thanks!
Hi! Some weeks ago my kaiser stop playing sounds like music and the ringtones.I dont know if it happened when i dropped it on the floor... So i opened my kaiser (bought on ebay and has no warranty) to see if there was something changed. The speaker looks well but i bought a new one from ebay (received it broken ). I just opened it a little but i saw something that i dont know if is right and i would like you to tell me. I dont know if it's a little battery but it looks like it's covered with a strange substance.Now is it supposed to be there or could it be caused by huminity for instance?
Here are some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi. It Is "golden cap" which is back up source. The P/N is in the service manual. The replacement part could be found on digikey...The substance sould not be there. Cheers!
you should replace that battery, its fully corroded, which may lead to rust in your kaiser... take it out and wait for the new one to arrive!
Yup that's one leaky battery. You'll need to replace that and clean up the contacts extremely carefully, being careful not to get acid on yourself or anything else.
use of golden capacitor
Hi
I face some trouble with my Kaiser (sometimes don't charge battery, sometimes reboot...)
Since it did not charge battery at all, I opened it and remouted it : it work properly again.. then it started not working again
I'm asking myself : if this capacitor is old (about 3 years) what could be the symptoms of its failure ?
Thank you for your help
Yes, Good question!!
My kaiser stopped charging. The PC would recognise it and it would (usually) boot fine but would not charge. I found another one that i bought cheap.
I had the other one laying around and thought i'd have a play with it.
I tried:
--Other USB cables.
--Other chargers.
--Other battries.
--Charging with an external battery charger.
Turns out that it all works fine but the phone will not work as a charger. I read somewhere that the fuse may have blown that is why the PC still recognises it. However, i'm not sure i can rule out the golden cap. Anyone changed a fuse? anyone had the same problem and a change of the golden cap solved it?
There is not much chatter about these problems either. I may start a new thread...
Hi
I guessed that my problem came form the internal battery connector.
I soldered directly a battery on the connector, and the battery charged OK.
But this fix seems more to be a "lucky strike" then a real patch to the problem.
Tell me if you open a new thread about golden cap.
I have a guess why the phone stopped playing music: I think the slot of the volume button is loose. On your first picture next to the main battery pins there is a small slot into which the volume control connects. When you put it back, make sure it is well pushed into the slot, I had this problem previously.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My wife's phone wont boot and all that comes up is this screen. I've tried the 3 button combos to reach recovery or download. the phone wont load at all. Can someone please point me in the direction so I can remedy this?
Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Try the various combinations of 3-button combos.
If that doesnt work, make a usb jig
just search for it on xda
OR
use youtube for a step by step approach.
The best way is to solder in the correct set of resistors (I think its ~ 300K ohms) onto a mirco usb male adapter and insert into the usb port on the captivate. The phone (provided the batttery is charged) should enter download mode.
Again instructions are everywhere, just look up 'usb jig'
I got mine into download mode by buying a 300K resistor and just bending the pins and placing tape between the ends .... easy fix but may take some time to get it right. THe idea is to press down on usb pins 4 and 5 in the phone which are the two right-most pins when facing the phone. I used this vid to unbrick mine:
http://www.youtube.com/watch?v=D0aoabVtPJ8
Also, if youre not keen, have time and money on your hands, just search for it on ebay, theres plenty of ready made ones too.
ozy944 said:
Try the various combinations of 3-button combos.
If that doesnt work, make a usb jig
just search for it on xda
OR
use youtube for a step by step approach.
The best way is to solder in the correct set of resistors (I think its ~ 300K ohms) onto a mirco usb male adapter and insert into the usb port on the captivate. The phone (provided the batttery is charged) should enter download mode.
Again instructions are everywhere, just look up 'usb jig'
I got mine into download mode by buying a 300K resistor and just bending the pins and placing tape between the ends .... easy fix but may take some time to get it right.
Click to expand...
Click to collapse
Thank you!
Sent from my SAMSUNG-SGH-I897 using XDA App
Hello,
I've been having problems with the touchscreen lately. Everytime it is not 'grounded' via my PC USB cable, whenever I try to put two fingers horizontally or vertically they seems to disrupt each other ie:
http://i.imgur.com/ASwFmhw.jpg
This doesn't happen when:
1. USB connected to the PC. (seems to have the best result)
2. I hold the phone with my hands and it doesn't lie on a flat surface. (still ghost touches when I align 3 or more fingers in certain position)
3. It is hooked to a decent charger with proper grounding.
Seems like there is some kind of static charge leftovers or something that disrupts the multitouch in horizontal and vertical positions. Any way to permanently get rid of such static electricity? Or is it literally 'leaking' somewhere from within the device and the only thing I can do is RMA?
People on the MIUI forums reported similar problems but only while charing the device with improper chargers.
if You have root try adding persist.usb.hvdcp.detect=true to build.prop, always take a backup before changing anything, see if that helps
SIRKRA said:
if You have root try adding persist.usb.hvdcp.detect=true to build.prop, always take a backup before changing anything, see if that helps
Click to expand...
Click to collapse
Tried, didn't work. The issues seems hardware based. The grounding of static electricity is simply broken inside the phone and there is no way to fix it other than to disassemble and see what is wrong.
Thanks anyway.
Delzor said:
Tried, didn't work. The issues seems hardware based. The grounding of static electricity is simply broken inside the phone and there is no way to fix it other than to disassemble and see what is wrong.
Thanks anyway.
Click to expand...
Click to collapse
Damn that's bad, I've solved with this line, hope You find the problem but as You point it seems like a defective touch panel :good:
I also have ghost touchs while charging AC. I've tried a lot of roms and anyone solved it. Anyway, I learned I shouldn't use the pone while charging xDD
emeuge said:
I also have ghost touchs while charging AC. I've tried a lot of roms and anyone solved it. Anyway, I learned I shouldn't use the pone while charging xDD
Click to expand...
Click to collapse
That's just a bad filtered charger, I own a 2A charger which is bad filtered, i hear the mains hum in my earbuds when connected to the phone while charging with this one, ghost touches and random taps included.
And then I have another 2 chargers, one is 1A, which came with my MI3 and the other one is a 750mA Nokia AC-20E which came with Lumia 520. None of these two make ghost touches or hum from mains. All depends on their filtration circuit quality. Try some other charger, for instance some Samsung charger and see if the phone is usable then.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The left one is the 2A "ghost touch" charger and the right one is the original charger which came with my Mi3.
Odesláno z mého MI 3W pomocí Tapatalk
SIRKRA said:
Damn that's bad, I've solved with this line, hope You find the problem but as You point it seems like a defective touch panel :good:
Click to expand...
Click to collapse
I RMA'd the phone, the technician stated that a change of the touch panel was done.
Alas, the problem persists. I specifically said that there is a grounding problem yet they only service the touch panel. I am quite furious right now.
Waited almost a month for them to do exactly nothing with it.
I too hv this issue why is it anyone knws or hv solution for it?
i m facing this problem even when phone is not connected to usb...and when i restart it problem solved for some time and then again continues ...any solutions found ? one plus one also got this problem
found temperary and good solution :
http://forum.xda-developers.com/oneplus-one/themes-apps/app-touch-screen-fixer-t3079029
Hey guys, I'm pulling my hairs out on this problem I am getting with my note 4.
Long story short - I cannot get a GPS fix (to even a single sat) with my N910T.
The longer version:
This thing had a cracked screen - but worked great before that (no GPS problems) and I used it a good year before breaking it. So I bought a N910A (ATT) note 4 to use the screen to fix my trusty note.
I gutted both phones, and put my N910T motherboard in the N910A's frame, with the screen still attached to the frame. I kept the N910A's USB daughterboard (with the charging port) because in the research I did, it seemed basically identical to the one from my broken screen frame, and I knew it would be tricky to get that out and into the new one without busting the new glass or destroying the flex cables.
So after some trouble with the S pen not working initially (the cable didn't press in fully, had to stick paper behind the flex cable and it went in properly) I was able to get the phone up and running again, and all features seemed to work great again.
However - I noticed after a couple days that the GPS was super spotty, so bad it was mostly unusable. I noticed that AGPS was on and it was using wifi and mobile data to help get a fix, so I turned it to GPS only mode. In GPS only mode the phone gets not signal whatsoever, no matter where I am.
I tried the simple fixes many recommend online, one which is to try tightening the screws a bit, and in fact, as this process continued I opened and closed up the phone several times, making sure to carefully but tightly screw all the screws back into place. That didn't help. I also tried making sure the compass calibration was good - and it made no difference. And I even factory reset to make sure there were no issues with installed apps or anything like that.
I got to thinking, perhaps its a issue with the small bendable pins that press from the motherboard into the mid-frame not making good contact, so I tore the phone down a couple more times, slightly bent out - very carefully - all the pins that press into the mid-frame to make them all have a solid contact, and even tried to get any corrosion or debris from the pads on the mid-frame. I even made sure there was contact for those little ones alone the sides of the phone which seem to have something to do with the buttons rather than what I'm dealing with.
Still no luck, so I tried doing a NV rebuild, which I read might solve getting 0 sat fixes, and discovered my phone wouldn't let me into that menu of the service options, so I had to install root and then do it through shortcut master instead. Once I finally was able to get to the menu and run the NV rebuild.... nothing changed.
So I am fresh outta ideas, and I'm thinking that A) that ATT USB daughterboard actually plays a part in GPS somehow and I need to take my TMO one out of the old phone and put it in the new frame and screen.... or B) Something is damaged on my motherboard.... or C) Somebody out there has a better solution
Any ideas, experiences of what worked are all appreciated!
BUMP --------
Still having this issue. Tried opening it up, and realllllly making sure those antenna springs are making contact, and I made sure the contacts on the mid frame are clean.
I tried TopNTP and that made no difference. Here is an image of whats going on when I run GPS Test:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump?
Losing hope for my old phone here
Anybody happen to know if the daughter board that has the USB charging port plays any role in gps?