Database Develop

Installing Continuum

I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol
Sent from parts unknown.

Boraltis said:
I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol QUOTE]
Just read over the op for C5. if you already have the 2.3 boot loaders you only need to flash the no boot version in recovery. The instructions in the op are very detailed.
Click to expand...
Click to collapse

Also, im running Continuum 5 and it is real nice...

Thanks.
Sent from parts unknown.

Read the first 10-20 pages of C5 thread. Also, I don't think cm7 has2.3.3 bootloaders.
Sent from my GT-I9000 using XDA App

You could always try flashing it without bootloaders and check it out. I have tried the other 2.3.3 ROMS out there and I find this one to be really smooth with very little issues. Battery is good, Rotation is great, Camera works good. If you have a Jig, you should not have any problems with ODIN.

When I went from CM7 to Continuum, I flashed back to Stock first just to be safe. Continuum V.5 RC2 is by far less buggy and smoother than CM7 in IMHO. I love it.

Boraltis said:
I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol
Sent from parts unknown.
Click to expand...
Click to collapse
CM7 doesn't have the new bootloaders. flash to stock then flash continuum with bootloaders.
Sent from my Captivate using XDA Premium

longr6 said:
You could always try flashing it without bootloaders and check it out. I have tried the other 2.3.3 ROMS out there and I find this one to be really smooth with very little issues. Battery is good, Rotation is great, Camera works good. If you have a Jig, you should not have any problems with ODIN.
Click to expand...
Click to collapse
Flash w/o bootloaders and you lose recovery. Then you have to use odin to go back to stock.
Sent from my GT-I9000 using XDA App

The process layed out in the first post for Continuum works perfectly, I wouldn't be worried about flashing the one with bootloaders, as long as you READ every step in detail first!

Using Heimdall in Linux to install Continuum
I'm ready to install Continuum v5, but would prefer to avoid Odin and Windows. I'm running Cognition 4.3.1 now; installing that was easy, just using CWM recovery.
Anyone know how to install Continuum using Heimdall? Also, how do I flash back to stock using Heimdall?
TIA.

Doesn't Continuum v5 have ext4 by default?
Someone on the main Continuum forum said that the ext4 file system does not come installed by default but it could be enabled using the ext4 app in the app drawer. This sounds ridiculous. To change file systems, you have to do the equivalent of reformatting the partition. In order to not lose all your data, you would have to back up, change the file system, then restore. I doubt very much you could do that with a phone app.
Am I wrong?

Yes you are wrong. The app boots the phone into recovery backs up, converts, restores, and then reboots. All from one button press in the app.

I have used on perception2 beta 1 and took minute rebooted then had nothing change and didn't backup then converted back to rfs and flash beta 2 and lost nothing
Sent from my GT-I9000 using XDA Premium App

what is this rom anyways?? stock gingerbread

studacris said:
Yes you are wrong. The app boots the phone into recovery backs up, converts, restores, and then reboots. All from one button press in the app.
Click to expand...
Click to collapse
Cool. I didn't know it could do that. Is it safe? I'll for sure back up everything before I do it but....

pixbuf said:
Cool. I didn't know it could do that. Is it safe? I'll for sure back up everything before I do it but....
Click to expand...
Click to collapse
Just as safe as doing it from cwm on froyo ... A backup is recommended before you do ANYTHING cause sometimes even the simplest thing can **** something up...

Do I need 3 button combo to install using odin 3 button?
My captivate does not have the 3 button combo, so I have no way to get into download mode on my own. I have never used the Odin 3 button, but am very familiar with Odin one click. Odin one click automatically puts my phone into download mode in order to finish flashing to stock. I am wanting to install continuum v5, and understand the instructions fully, but just wanted to make sure before I started, that I can successfully install using icezars instructions, without the need for 3 button combo. Can anyone confirm if this is possible, or if I need to install the 3 button combo fix that is floating around the forums? Thanks in advance for any help.
I currently have Continuum V4 and used have AIO Captivate Toolbox to install most roms.

First it's not called "odin 3 button" it's just odin 3.
You don't technically need the button combo to flash it but if something goes awry and you end up in s boot loop, or soft brick your only fix then would be a jig...
After you make it to gingerbread you will have a working combo ... The buttons will be different thats in the op of continuum 5 ...

Thanks for clearing that up. I'm not sure where I came up with calling it that, and I've read plenty about Odin 3, but have still been a bit nervous when it comes to utilizing it. I am confident that I can follow directions well, and have read the instructions several times as well as many of the posts. I may have to order myself a jig just in case something does get messed up, but I'm antsy to get me some gingerbread love.
Again, thank you for the help.

Another bricked phone after oden. 1011. Help!!

I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.

That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)

Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.

Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck

speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.

The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.

HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD

Ok, thanks. I'll post an update tonight after I get back home.

SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.

Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?

not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM

HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom

capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....

capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.

prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"

HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough

Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.

why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want

Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!

Gingerbread 2.3.3 Q&A

I think we need to sticky/pin this for us who just flash the stock/leaked GB 2.3.3 along with the optional root from this thread since we can't post there http://forum.xda-developers.com/showthread.php?t=1127249
Since this is the route that I went I would be able to help answer questions for others. I see cognition, mosaic.... but how about us who like to keep it stock?

Brickster
Just want to say that I have learned so much on here and I have a lot of fun trying out different ROMs. Thanks to all the DEVs, when I get a job I'll buy you guys some beers lol.
So... This has soft bricked my phone every single time. The first 4 attempts were from stock eclair. My last attempt I was successfully running Stock I9000 2.3.3 NEE so I thought I would try it from there. Odin gets to boot.bin and then says FAIL! I got into download mode using VOL DWN and PWR which is the key combination from Stock I9000 2.3.3 NEE. I have been running I897UCJF6-final-OCD-REV0 to flash back to stock after brickness.
So i'm sure i'm missing something pretty simple, but any help is appreciated.

Woah dude, that was very very very close to being a hard brick. Boot.bin is the primitive bootloader. so you had a kf1 pbl, and since you had the combos for I9k boots you obviously had an I9000 sbl, (secondary bootloader that's where the combos are contained.)
Make sure the usb chord is on a port attached to the motherboard (in the back of the pc), if it is already switch to another. Reboot the computer and try again.
But with such a close call like that, and the fact that you said it fails every time I would avoid it altogether I mean its a stock rom, is it worth bricking over??

Well, I really wanted to try the Cognition 5 v2 ROM. Instructions say to be on Samsung Gingerbread. So that's why I tried so many times and I am really more curious to find out why it's not working than I am worried about it bricking.
I was on a port directly on the motherboard Odin displayed as com10.
I was thinking that maybe it is my computer since most have success with this 1-click. I forget sometimes I'm running a 64-bit version of Windows 7 maybe that's the culprit. Is there anything I can check on my computer to keep this from happening again?

ttr187 said:
Well, I really wanted to try the Cognition 5 v2 ROM. Instructions say to be on Samsung Gingerbread. So that's why I tried so many times and I am really more curious to find out why it's not working than I am worried about it bricking.
I was on a port directly on the motherboard Odin displayed as com10.
I was thinking that maybe it is my computer since most have success with this 1-click. I forget sometimes I'm running a 64-bit version of Windows 7 maybe that's the culprit. Is there anything I can check on my computer to keep this from happening again?
Click to expand...
Click to collapse
Use admin mode for Odin and change the compatiblity to Xp service pack 2. This is the best way to run Odin for Windows 7 x 64. Since I use Cog 5 v2, I strongly recommend following the instructions 100%. Please remember when you need to loading stock UCKF1 and when you load UCKF1, you are loading bootloaders, so any disconnection can brick you hard. Thank goodness for the simplified instructions there.

GB stock? I thougth captivate stock were eclair or froyo.

KF1 is the leaked gingerbread firmware for the captivate...

popfan said:
Use admin mode for Odin and change the compatiblity to Xp service pack 2.
Click to expand...
Click to collapse
After changing the compatibility mode to XP pack 2 everything worked like a charm. Then I was able to successfully flash Cognition 5 v2. Sweet!
Thanks.

Hello. I use Darky's rom 10.2. And I have problem with Dialer. It sometimes crushes and exits. Problem will be solved with reboot. how can I fix it? thanks.

I would try to flash again and make sure you do a data/cache wipe. I've had random issues with other ROMs when I did not wipe, and all was fixed once I flashed properly.

I know I'm not wiping everything while flashing, but I flash it as told as in FAQ. But my memory will stay unwiped after I run newly installed ROM.

When you say "memory" what exactly do you mean?
If you mean the /sdcard storage partition, that is normal.

yes, /sdcard storage partition.
Before flashing, I get warning message about wiping all data in my internal storage... what does it mean then?

The /data and /cache partitions. And the dalvik cache.
The first 2 are in the cwm main menu. Wipe data/factory reset and wipe cache. Dalvik is in the advanced sub menu.

When i flash this, my phone asks me for a password. It won't let me do anything without the password and I have no idea what it is. I've tried samfirmware.com and that most certainly is not it.

Griff1220 said:
When i flash this, my phone asks me for a password. It won't let me do anything without the password and I have no idea what it is. I've tried samfirmware.com and that most certainly is not it.
Click to expand...
Click to collapse
It appears to be asking for some encryption password according to one of these guys that posted in the following thread. But there is a way to get past it by the method in this thread...http://forum.xda-developers.com/show...02&postcount=7
Remove ur external sd and copy over/back up anything u want to save from ur internal sd before u do this, just in case.

data/chache wipe i should do right after flashing right?

[Q] Accidentally flashed to 2.1

Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!

Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.

First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.

Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.

Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?

korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.

Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App

wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate

wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on

Alright, thank you, I will be checking back tomorrow.

Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.

Easy flash GB BL's and you won't have to worry about 3 button problems!

If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's

using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..

kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.

wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info

kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium

Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).

4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium

Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.

Tried going from 2.2 Andrometa3 to ICS ROM 4.0.3. Houston we have a problem.

I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.

LOL OOPS thought i was in the dev section.... ignore..help below.

xCaptivateRx said:
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
Click to expand...
Click to collapse
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.

TRusselo said:
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
Click to expand...
Click to collapse
Very good responce...however after odin3 one clicking back to stock 2.1 eclair, I lost my clockwork mod folder that was on the internal SD, of course. Rookie mistake, I should've definately copied it on to the external SD card. Thanks for informing me of proper terminology. Also, after downloading rom manager and flashing, booting recovery, I can only access cwm through the rom manager, the three button fix doesn't work.
Why was this moved? I posted in general..

because you have a question/problem
rom manager is only used with 2.1 (for captivate). doesnt work on 2.2 or 2.3.X or 4.0.X
in all newer versions of android we "bake" cwm into the custom kernels we package into the custom roms. so there is no stock recovery and you dont need the update.zip.
dunno why you would flash all the way back to 2.1... EWWW.
in the dev section there is a sticky called odin master collection. use a newer stock rom. the master collection also has stocks versions, pre-packcaged with a custom cwm kernel so you can skip a step of getting it after going back to stock.

Do we know why this happened in the first place? Incompatible kernel? Is there a guide somewhere for moving from GB to ICS?
Sent from my SGH-I897 using XDA App

I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.

Do you not have to flash back to 2.1 after having these problems? Right now my phone is at the soft brick screen, no button combo working. Not recognized by the computer either. I'm heading out to radio shack and make a USB jig in a bit. I'd love to just flash straight up to a gingerbread ROM if I can possibly get this thing in download mode. Anybody help a brotha out!
Edit: the sim is not activated, I just run it off Wi-Fi because big red is my carrier. This is my development phone. So I can't just KIES update to whatever the newest is.
Sent from my DROID X2 using XDA App

Any firmware should work, no need to go all the way to eclair...just flash gingerbread.

Don't think its been mentioned yet but when going from 2.2 to ICS, you have to flash the rom twice to get out of the bootloops. Sounds like you were at that point but when you flashed your nandroid instead of the ICS rom again, your phone must not have liked it.

aww.W.T.F? said:
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Click to expand...
Click to collapse
Not all ICS ROM's require GB bootloaders. I ran THS, and am now on vibranturk's AOKP and I came straight from 2.1

I think the issue was you're supposed to flash them twice. Well that fixed it for me. I dkbhave the gingerbread boot loaders now though
Sent from my SGH-I897 using xda premium

I went from bone stock Froyo 2.2 straight to THS ICS with no problems whatsoever. So some ICS Roms doesn't need GB bootloaders.
Sent from my SGH-I897 using xda premium

I'm on the same situation as the original poster: I'm on andromeda3 and now I want to upgrade to ICS. Right now my captivate has cwm 2.5.1.2 can I flash any ICS mod from there or do I need to do something else?

See this.... TRusselo's "Guide..." that is a Stickied Thread in the Q & A Forum.
I believe u will need the Gingerbread Bootloaders...
Sent from my SAMSUNG-SGH-I777 using xda premium