Weird issue when trying to upgrade baseband that I've never experienced before.
I upgraded to the v20q version of 725bb to match the Django Manouche ROM and all worked well. However, when I restored to a backup of CM9 and tried to make a call, it just ends the call as soon as I hit the call button. I restored a CM7 backup I've got as well and exactly the same issue.
Anyone got any idea why this is happening?
What baseband SHOULD be used with CM9?
mcnob said:
Weird issue when trying to upgrade baseband that I've never experienced before.
I upgraded to the v20q version of 725bb to match the Django Manouche ROM and all worked well. However, when I restored to a backup of CM9 and tried to make a call, it just ends the call as soon as I hit the call button. I restored a CM7 backup I've got as well and exactly the same issue.
Anyone got any idea why this is happening?
What baseband SHOULD be used with CM9?
Click to expand...
Click to collapse
If you check the BB advised by CM9 or CM7...it is normally a BB 218 and a V10 RIL....dont use the V20 series.
Or try the NOVA PLUS by HEI, it suggests to use the BB 725 and V10D RIL.....this ROM for ICS is great....just try it.
by the way, Django is the best so far in GB
CM 7 and CM 9 ROMs on some BB and RIL combinations- radio does not work properly....maybe even the mobile data, wifi and so on
Hope this helps
Could you pls check if you have this problem also when 3g is off? I have a similar problem and i can call just when i have 2g on or no data connection
As already said use a v10d Baseband during using a CM9 rom. And what rom are you using now? CM9 or cm7?
Sent from my LG-P990 using xda premium
Dont use the v20 series. It gave me issues too. Flash the non v20 version in that big BB list. It works on Temasek (cm7) and Owain (cm9)
Related
I have Froyo v10d baseband and after flashing any custom rom when i try to match ril with baseband (with GetRIL) all goes wrong. Well not all but crucial thing. After reboot there`s no more screen with dialpad to enter simcard PIN so I cant get network signal. I`ve tried all 3 Django`s rom, 2 of Gueste and new Thanatos.
Sorry about english, I hope i`ve been clear enough.
Sorry guys I forgot to say that I install v10d ril whit GetRIL. After reboot there is as on attached pics.
Hi,
0823 BB is sometimes very problematic, and not suitable for everybody (cf second image).
I think that if you want to use latest custom roms, and especially v20o, you'd better flash v20m baseband, which has the same numeric name as yours but is clearly not the same. I personnally used v20l baseband without big problem, and I just upgraded to v20m one.
I just read that v20m baseband is not compatible with Cyanogenmod (only Froyo BB must be used), but flashing a BB is just a 5 minutes work.
You have all the BB you want in the Great Temasek shared folder here (in optimus p990 folder): http://www.mediafire.com/temasek
For V20m, you have for .fls files to flash, beginning with biggest file and following with decreasing size.
There is a how to text file in archive.
zeepday said:
I have Froyo v10d baseband and after flashing any custom rom when i try to match ril with baseband (with GetRIL) all goes wrong. Well not all but crucial thing. After reboot there`s no more screen with dialpad to enter simcard PIN so I cant get network signal.
Click to expand...
Click to collapse
It's the same issue I had when trying to use GB RIL with CM7 (latest KANG).
I have the same baseband you have, and it works well with RIL 725 v10d.
With CM7 Kangs everything works fine.
So when I flash custom GB ROM can I leave RIL from him as on first attached pic 0725 v20l? Somewhere I read that different RIL cause more battery drain.
zeepday said:
With CM7 Kangs everything works fine.
So when I flash custom GB ROM can I leave RIL from him as on first attached pic 0725 v20l? Somewhere I read that different RIL cause more battery drain.
Click to expand...
Click to collapse
Why not simply try and test? can't say it for you, and changing Ril is fast...
I had the same issue.
I currently have v20M flashed through KDZ updater, so I have 725 v20m BB and I'm afraid to have radio problems with CM7.
I tried using V20l RIL and didn't work, but using v10d 725 RIL worked but I reverted to stock rom for now because maybe I'll have some problems.
If you tell me it's ok to use v10d 725 RIL I'll try CM7 again.
Cheers!
el_charlie said:
I had the same issue.
I currently have v20M flashed through KDZ updater, so I have 725 v20m BB and I'm afraid to have radio problems with CM7.
I tried using V20l RIL and didn't work, but using v10d 725 RIL worked but I reverted to stock rom for now because maybe I'll have some problems.
If you tell me it's ok to use v10d 725 RIL I'll try CM7 again.
Cheers!
Click to expand...
Click to collapse
Its not just ok to use v10d 725 RIL, it is a must to use it. Why? CM7 isn't compatible with GB RIL. You can use GB BB but not GB RIL. It will cause unknown baseband if u use GB RIL.
temasek said:
Its not just ok to use v10d 725 RIL, it is a must to use it. Why? CM7 isn't compatible with GB RIL. You can use GB BB but not GB RIL. It will cause unknown baseband if u use GB RIL.
Click to expand...
Click to collapse
I know, but that's the best combination?
Cheers!
Sent from my LG-P990 using xda premium
el_charlie said:
I know, but that's the best combination?
Cheers!
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
No best combo. U have to try out yourself.
Striatum_bdr said:
Hi,
0823 BB is sometimes very problematic, and not suitable for everybody (cf second image).
I think that if you want to use latest custom roms, and especially v20o, you'd better flash v20m baseband, which has the same numeric name as yours but is clearly not the same. I personnally used v20l baseband without big problem, and I just upgraded to v20m one.
I just read that v20m baseband is not compatible with Cyanogenmod (only Froyo BB must be used), but flashing a BB is just a 5 minutes work.
You have all the BB you want in the Great Temasek shared folder here (in optimus p990 folder): http://www.mediafire.com/temasek
For V20m, you have for .fls files to flash, beginning with biggest file and following with decreasing size.
There is a how to text file in archive.
Click to expand...
Click to collapse
Hello, I downloaded the V20M-Baseband.zip but there is no text to explain how to flash it.
Can anyone help?
Thanks
Search in dev section there are threads about this.
Hi and sry for my bad english
I have a OB with CM7 # 60 nightly and i'm impressed by the speed of my phone but..
the problem is since a few days my mobile network disconnects often for a few minutes. Thats really stupid because if I want do download a update, app, rom or something like that the connections always cuts off.
So i considered to flash the new official GB Rom and than flash the CM, so maybe i have a newer Version of Baseband. Would this work? or is there a better solution?
maybe interesting:
CM7 # 60 nightly
ClockworkMod 5.0.2.6
Huexxx V4 kernel
BasebandVersion: 1035.23_20110707
Thanks for the help.
phil
Better use Nova Kernel and not Huexxx, since this seems to have more bugs... But just guessing... Give it a shot and report
I tried the Nova V11c kernel but my problem isn't solved
Is there something else what I can try out?
phil
what's a kernel? I installed cyanogenmod with the rom manager app. It was corrible, so then I tried the zeus custom rom, but the soft key lights still don't work. Do I need to install a kernel? Where do I get a kernel? I just want a phone that works as LG said it should!
I flashed the "zeus"-Rom.
now i have baseband version: XMM6160
problem solved
I am having difficulties finding ROM twhich is not SODing every 2-3 hours. I have tried:
[CM7][KANG][FEB25] temasek's KANG BUILD P204-69 - FINAL RELEASE
[ROM][MOD] WIUI 2.2.24 Stable (GB) v4 (ICS) b0 - MULTiLanguage
update-cm-7-20120226-NIGHTLY-p990-signed
w/ and w/o Etanas kernels.
With those ROMs I have:
after-call SOD
charging SOD
also there is "SD card not found" bug with CM7 roms/kangs.
Modaco's GR6 looks more stable. SODs are rare but with Spica's kernels it starts to behave similar to CM7.
So if you have stable 2X with no or very rare (rare = max 1 in week) SODs - please tell me - which ROM with which kernel (if any) are you using? Any other mods/settings/apps?
Thank you!
SoD ???
Sent from my Optimus 2X using XDA App
nexus2515 said:
SoD ???
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Screen Of Death
deff_ins said:
I am having difficulties finding ROM twhich is not SODing every 2-3 hours. I have tried:
[CM7][KANG][FEB25] temasek's KANG BUILD P204-69 - FINAL RELEASE
[ROM][MOD] WIUI 2.2.24 Stable (GB) v4 (ICS) b0 - MULTiLanguage
update-cm-7-20120226-NIGHTLY-p990-signed
w/ and w/o Etanas kernels.
With those ROMs I have:
after-call SOD
charging SOD
also there is "SD card not found" bug with CM7 roms/kangs.
Modaco's GR6 looks more stable. SODs are rare but with Spica's kernels it starts to behave similar to CM7.
So if you have stable 2X with no or very rare (rare = max 1 in week) SODs - please tell me - which ROM with which kernel (if any) are you using? Any other mods/settings/apps?
Thank you!
Click to expand...
Click to collapse
I use DjangoManouche1.0 with stock kernel and I don't have any SOD
Envoyé 2X plus vite avec mon P990
Screen of death. Screen goes black and you can wake it up unless you remove battery. I have tried couple of roms(stock with spica kernels,cm7,gueste hibryd 3.1)and i didnt have any sods.
Sent from my Optimus 2X using XDA App
Django 1.0 with RC11-R no SOD here
Sent from my LG-P990
Every phone is different... but if your phone is like mine... you can install any GINGER rom based on STOCK rom. Not Cyanogen.
For example, v20q (the last version available).
You must change the baseband too. For example the 725 from v20q.
If you want to change the kernel, the R11-R from spica is great, after that, all versions have problems in some phones.
Regards!
Have you checked that is not related to one of the programs you have installed? I used to have SODs until I removed a battery saver I had installed, that is half a year ago and I haven't had any since then.
Just to be sure in the safe side you might try to use your phone for a whole week w/o any apps and see if that is the case.
BTW, currently I am using CM7 nightly build 204.
Cheers.
I'm on Temasek's kangs with various Vadonka's kernels - for quite a long time. No problms found. I cannot recall problems on other roms either (I used mainly MoDaCo ones).
How about doing the clean install, i.e. do a full wipe, cache wipe, dalvik cache wipe, then install e.g. Temasek Kang #69. Just that - bare system. Then check if your phone is still unstable.
EDITED: the only app that you should install is GetRIL - to get your BB and RIL in sync. BTW, which BB are you on?
Some phones can't handle low frequecies (216MHz), you may change the lowest freq. with setCPU or an other tool like this. Maybe it helps.
nexus2515 said:
SoD ???
Click to expand...
Click to collapse
well this suits best. also BSOD is used very often here to name this problem, but the is nothing blue actually
McGiverGim said:
... For example the 725 from v20q.
If you want to change the kernel, the R11-R from spica is great...
Click to expand...
Click to collapse
BB is one more unsolved mistery - i cant understand - are all 725 the same or is there diference between them? i also tried that 1120 that was posted here on forums - that BB was buggy as hell for me so i went back to 725.
ernestus said:
Have you checked that is not related to one of the programs you have installed?
BTW, currently I am using CM7 nightly build 204.
Cheers.
Click to expand...
Click to collapse
it might be software, but i am not using any battery saving apps. tho im installing the same software after every clean install - so this might be the case.
mipr said:
How about doing the clean install, i.e. do a full wipe, cache wipe, dalvik cache wipe, then install e.g. Temasek Kang #69. Just that - bare system. Then check if your phone is still unstable.
EDITED: the only app that you should install is GetRIL - to get your BB and RIL in sync. BTW, which BB are you on?
Click to expand...
Click to collapse
i am always doing full wipe. im on 725 and im using GetRIL with recomended RIL.
snel76 said:
Some phones can't handle low frequecies (216MHz), you may change the lowest freq. with setCPU or an other tool like this. Maybe it helps.
Click to expand...
Click to collapse
ill check it!
Thanks for the tips guys! First ill check Temasek Kang #69 without soft and will see what happens.
I use an older Temasek with IronKernel00. About 2 weeks old install? Never flashed another Baseband, i think i am on the stock(?) 725.
Not a single SOD. But again, never had a SOD on the stock ROM from LG, even in the Froyo times. Well, had a SOC when the phone were OC'ed to 1.55
Been using Temasek's kang for a while and it is quite stable. I'm on stock kernel as well.
Since you also mentioned that your device sometimes fails to detect your SDcard, I believe it could be corrupted. Have you tried formatting it? (make a backup first).
Sent from a galaxy far, far away...
I have been using the ICS Nova HD from the very start it went aviable for download and no SoD yet.
Hi. I had the same problems as you do when I was using Juice Defender with its profiles.
A month ago I deleted it and started using setcpu and I didn't had any SOD anymore.
Using tamasek's kang 69+ Vadonka's kernel
any more lucky cm7 users?
There aren't "lucky" users, sods are caused mainly by:
-radio errors: the phone shuts-off because baseband encounters a critical error, and kernel goes in panic. This is common in cm7 roms, because ril is closed-source (so radio commands are obtained via reverse-engeenering), so we don't know the exact commands and radio management. A normal phone usage should not encounter this kind of SoD. Juicedefender or Toggle2G tweak continuously radio settings (i.e. internet activation or 2G/3G switching), so in cm7 these app are not recommended.
-kernel panic: phone shuts-off because of a generic kernel panic. The main cause of kernel panic is a bad/aggresive-tweaked custom kernel, or UV/OC. An unknown cause of kernel panic happens sometimes during phone charging.
I DON'T RECOMMEND UNDERVOLTING, a lot of phone could not manage that. I had a lot of SoDs because of that.
If I wrote something wrong please correct me.
Inviato dal mio Smartpad810c usando Tapatalk
I haven't had any SOD yet. Use my 2X since last April.
Been on Stock, Modaco Fr19, Gueste v2.2, Gueste v3.1, Gueste v3.2 and am on Temaseks last KANG.
Tried different Kernels as well.
CM7 is highly recommended to be used with BB and RIL 218. Maybe this is the source of your problems.
If your Phone gets this SODs that often, I would revert to stock and return it.
Chances are high, that you will get a newer and bug free specimen.
if you use cm7 kang #69 and with etana kernel, i suggest you change the minimum value to 324 MHZ since it doesn't give me SOD at all. with my pimp my CPU configuration like this:
default: 324-1100MHZ.
idle / screen off: max & min 324 MHZ.
i don't Undervolt since it will give problem with my device. i guess i have the crap one can't undervolt
CM7 is highly recommended to be used with BB and RIL 218. Maybe this is the source of your problems.
Click to expand...
Click to collapse
nah, i use the BB and RIL 0725 SEA
thanks for your advices. will check frequencies at start - then ill will start to mess with BBs and RILs.
I have found that this might be bb related issue soding my phone all the time. With 1120 and 1120 ril my phone is stable. No sods in week. I flashed back to 725 and i had 2 sods in one day. Also i had difficulties to find correct ril as with a lot of 725 rils i did had other problems. For know im using system in my sig and i am quiet happy.
Hi,
was just about to upgrade the baseband on my 2x, but for some reason it's not working.
My old baseband was 725 and wanted to try BASEBAND 1120 - P990 ( SU660 Porting )
I downloaded SmartFlashTool_P990.exe + drivers and installed the 4 files in order from biggest to smallest.
When the LG logo started to flash (after each SW FLASH install), i removed and reattached to cable+"volume down" to install next file.
R375_SIC.fls
AENEAS_FW.fls
slb.fls
psi.fls
When I was done with the baseband flash, I installed lasted RC of [CM9][ROM][MAR07] Nova HD Plus.
Checked "about phone" and it still say I got baseband version 725
what went wrong?
zereke said:
Hi,
was just about to upgrade the baseband on my 2x, but for some reason it's not working.
My old baseband was 725 and wanted to try BASEBAND 1120 - P990 ( SU660 Porting )
I downloaded SmartFlashTool_P990.exe + drivers and installed the 4 files in order from biggest to smallest.
When the LG logo started to flash (after each SW FLASH install), i removed and reattached to cable+"volume down" to install next file.
R375_SIC.fls
AENEAS_FW.fls
slb.fls
psi.fls
When I was done with the baseband flash, I installed lasted RC of [CM9][ROM][MAR07] Nova HD Plus.
Checked "about phone" and it still say I got baseband version 725
what went wrong?
Click to expand...
Click to collapse
If you read the first post carefully, you will find that the author describes that he has compiled with his old archive....but that has to be 823 normally. Anyway, if your communications and other radio related stuff is working alright....why think about the information in the BB column.
thanks, didn't notice that.
Still don't know why I was not able to upgrade to 823
SREEPRAJAY said:
If you read the first post carefully, you will find that the author describes that he has compiled with his old archive....but that has to be 823 normally. Anyway, if your communications and other radio related stuff is working alright....why think about the information in the BB column.
Click to expand...
Click to collapse
This is not true, I think. It just states this for the update script in clockworkmod. The about phone should state something like 20111120
?
What does baseband do?
by changing your baseband you can possibly get better signal, better incall voice sound, but if you don;t suffer from any of those problems than don;t change it
bb
IF your BB and RIL mach, then you might get better batterylife.
Check your stock BB and ril. it must work best
piiiters said:
IF your BB and RIL mach, then you might get better batterylife.
Check your stock BB and ril. it must work best
Click to expand...
Click to collapse
And to match you RIL, there's a great app called GetRil .
Baseband and ROMs
Hi,
I have 725 baseband. Can I flash CM ROM or MIUI ROM?
Should I have a specific baseband before I flash a different ROM?
craterib said:
Hi,
I have 725 baseband. Can I flash CM ROM or MIUI ROM?
Should I have a specific baseband before I flash a different ROM?
Click to expand...
Click to collapse
725 seems to be the best for cm 9 (at least for me ) , so i would keep it
craterib said:
Hi,
I have 725 baseband. Can I flash CM ROM or MIUI ROM?
Should I have a specific baseband before I flash a different ROM?
Click to expand...
Click to collapse
I have BB 20120313 with RIL 20111120 and CM9 KANG RC0-29 and works good.
craterib said:
Hi,
I have 725 baseband. Can I flash CM ROM or MIUI ROM?
Should I have a specific baseband before I flash a different ROM?
Click to expand...
Click to collapse
No you don't, in some case the author of ROM specify the better BB, also you can use Get Ril to match ril and bb, this is usefull for battery life and best signal too
hi..
i recently installed custom rom Nova HD, i works well. but the problem is i can't make and receive phone call. can anyone help me? thanks before..
Bad ril/BB combo.
U can use v20s BB + v10d 0725 Europe/0824 Canada ril from Getril app.
It works with best call quality without problems.
Old good chance mbo is 0725 BB + v10d 0725 ril.
Sent from LG 2X using Tapatalk 2 Elite