hello, i have a little problem with my x8. i have make it dualtouch but when i turn off my phone and turn it on again, the dualtouch function is disappear. i must use the terminal emulator to make the dualtouch happen again. can i make the dualtouch function directly after i on my phone back without using terminal emulator again???? (sorry for bad english)(admin can delete my thread if do not like it, i search the old thread but not found the solutions)thank you...
which digitizer you have??
noobismyname said:
which digitizer you have??
Click to expand...
Click to collapse
ax8mt.ko and my roms is 2.2.9 CM Floyo v0.30. thanks because want to help.
use this(x8toolbox) instaid of terminal emulator. is preaty easy and you will have dual touch after reboot
edit: (some instructions) download the package and run x8toolbox.cmd then type 4 and press enter> type 2 and press enter, enjoy dualtouch!(i dont have to say that you should have plug in your phone with debuggin proccess on and not hit usb storage)
stamatis16 said:
use this(x8toolbox) instaid of terminal emulator. is preaty easy and you will have dual touch after reboot
edit: (some instructions) download the package and run x8toolbox.cmd then type 4 and press enter> type 2 and press enter, enjoy dualtouch!(i dont have to say that you should have plug in your phone with debuggin proccess on and not hit usb storage)
Click to expand...
Click to collapse
My dualtouch was gone too. Did your method and so far it keeps working. Thank you!
twismo1 said:
My dualtouch was gone too. Did your method and so far it keeps working. Thank you!
Click to expand...
Click to collapse
no problem glad i helped! dont forget to leave a thank to the op puppet13th for his work http://forum.xda-developers.com/showthread.php?t=1117100&highlight=x8toolbox
flash custom kernel.
Use xperia x8 toolbox....search it on the forum..
Download it ...install it...
And follow the instruction for installing dual touch.
It will automatically install dual touch on your phone either u hav synaptics or cypress ,, it will automatically find it nd install dual touch !!
Cheers:beer:
Sent from my E15i using XDA
green_carter said:
Use xperia x8 toolbox....search it on the forum..
Download it ...install it...
And follow the instruction for installing dual touch.
It will automatically install dual touch on your phone either u hav synaptics or cypress ,, it will automatically find it nd install dual touch !!
Cheers:beer:
Sent from my E15i using XDA
Click to expand...
Click to collapse
i have download x8 toolbox and install it, but my dual touch will gone after i turn on my phone again. everytime after i turn on my phone back, i must use the terminal emulater again to make dual touch happen. my digitizer is cypress. i also have busybox. i have to write su and insmod /system/lib/modules/ax8mt.ko and dmesg in terminal emulator everytime my phone turn on again and after that dualtouch can use again..
ibrahimrashid said:
i have download x8 toolbox and install it, but my dual touch will gone after i turn on my phone again. everytime after i turn on my phone back, i must use the terminal emulater again to make dual touch happen. my digitizer is cypress. i also have busybox. i have to write su and insmod /system/lib/modules/ax8mt.ko and dmesg in terminal emulator everytime my phone turn on again and after that dualtouch can use again..
Click to expand...
Click to collapse
try x8toolbox again a few more times and you will success!
if that dont work then you have to puch the "insmod /system/lib/modules/ax8mt.ko" in "/system/etc/hw_config.sh"
stamatis16 said:
try x8toolbox again a few more times and you will success!
if that dont work then you have to puch the "insmod /system/lib/modules/ax8mt.ko" in "/system/etc/hw_config.sh"
Click to expand...
Click to collapse
the problem cannot solve. however, i want to say thank you very much for try helping me. Now i think positive, write "insmod /system/lib/modules/ax8mt.ko" in terminal emulator is not difficult. haha... (thanks everyone)
ibrahimrashid said:
the problem cannot solve. however, i want to say thank you very much for try helping me. Now i think positive, write "insmod /system/lib/modules/ax8mt.ko" in terminal emulator is not difficult. haha... (thanks everyone)
Click to expand...
Click to collapse
no your problem can be solved, i had that once...for me toolbox worked after second or third try!
stamatis16 said:
no your problem can be solved, i had that once...for me toolbox worked after second or third try!
Click to expand...
Click to collapse
my problem is solved now. i do not need to write insmod /system/lib/modules/ax8mt.ko in terminal emulator again. this situation has increase my love level to my X8. hehe...
ibrahimrashid said:
my problem is solved now. i do not need to write insmod /system/lib/modules/ax8mt.ko in terminal emulator again. this situation has increase my love level to my X8. hehe...
Click to expand...
Click to collapse
Nice to hear!!!!
I guess you did it with toolbox..or maybe sth else?
Sent from my E15i using xda premium
stamatis16 said:
Nice to hear!!!!
I guess you did it with toolbox..or maybe sth else?
Sent from my E15i using xda premium
Click to expand...
Click to collapse
you right. i did it using toolbox.
Related
do anybody know how to use the commands n the terminal for the MyTOUCH...cuz i have kno keyboard...thz
jacsonmoore3 said:
do anybody know how to use the commands n the terminal for the MyTOUCH...cuz i have kno keyboard...thz
Click to expand...
Click to collapse
well you may not get a lot of help here considering the is the dream forum. try the sapphire section.
one way to do the commands is through adb
to enter the commands on the mt3g you need to go to the market and download better terminal
jenol said:
to enter the commands on the mt3g you need to go to the market and download better terminal
Click to expand...
Click to collapse
thz for ur help
jacsonmoore3 said:
do anybody know how to use the commands n the terminal for the MyTOUCH...cuz i have kno keyboard...thz
Click to expand...
Click to collapse
No schitt you dont have a keyboard lol....hold the menu button down the keyboard will pop up.
phatmanxxl said:
No schitt you dont have a keyboard lol....hold the menu button down the keyboard will pop up.
Click to expand...
Click to collapse
on the my touch 3g without the physical keyboard you cant enter numbers with the terminal but you can with better terminal therefore thats why i told him to download better terminal.
why i can't root my fon??
i try so many time but the result still same..
the superoneclick just go over and over until it jammed..
i have follow the instruction.
bydaway, my fon was root before,then it get hardbrick
i use the pcc to repair it, ok..but cant root
Make sure you have USB Debugging turned on and unmount the sd card.
do you have usb debugging enabled?
btw do you have DroidExplorer installed on your PC?
already did...still not working...
badutKU said:
already did...still not working...
Click to expand...
Click to collapse
do u hav phone drivers installed?
kirmada said:
do u hav phone drivers installed?
Click to expand...
Click to collapse
i got the driver installed.debugging mode on, and i also unmount the sd..
badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS
try with other PC.
badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
wen i first rooted,i read on some thread dat i need to hav microsoft net framework(latest) installed too and yeah i rooted with superoneclick too,jus giv a try
kirmada said:
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS
Click to expand...
Click to collapse
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??
Try running SuperOneClick as administrator
Sent from my X8 using xda premium
badutKU said:
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??
Click to expand...
Click to collapse
if u root with superoneclick,it will install busybox and chargemon automatically while rooting it
then install xrecovery
are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general
do you have a exploit list on your soc? if you do choose psneuter and click root! thats the way I did it!
sorry if my english is bad
wilbso said:
are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general
Click to expand...
Click to collapse
it not a latest version...but i use it when i 1st try to root my fon..that time it was ok.
why??????????
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................
badutKU said:
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................
Click to expand...
Click to collapse
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
Here is the lates superoneclick : http://forum.xda-developers.com/showthread.php?t=803682
I haved the same problem when my phone came back from se(bricked)
Have downloaded the lates superoneclick and it works!
And trie a reboot,after enabling usb debuging..
Good luck!
elderduke said:
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
Click to expand...
Click to collapse
+1. Its a great little program.
Sent from my E15i using XDA App
I have a problem with rooting my x8...
When i wat to root it, it goes all well till it comes to rooting device..
Then goes failed, and i get this screen(in attachment)
When i first got this phone, i rooted it normally... And I bricked it.
So, after I bricked it, i got that... Every time... I tried to factory reset it, but nothing...
I don't have any idea...
Any help?
Hi all,
Incidentally, I removed the application poweroff.apk with Titanium Backup, and I not did the backup. Now, my phone is not shutting down. When to put turn off, it just restarts.
I am with an enormous anguish. My question: I can turn it off by the battery, it will again turn on? I am with fear that the same reason that he is not shutting down, run the risk of it not connecting.
That is because I take the opportunity to change the firmware, and pass the v20q for the v20s. How to do it with Smartflash,I need disconnect the device to complete the procedure.
What do I turn it off again?
Can I change the firmware?
Please, I need help!
Thank you.
root explorer
Someone uses the RootExplorer?
I pulled out my battery like a hundred times. Nothing should happen.
You need to either reflash your ROM or install the update, both will give you the apk back.
Open terminal, write:
su
poweroff
It might work, let me know
PlacidoFerreira said:
Someone uses the RootExplorer?
Click to expand...
Click to collapse
Everyday
Sent from my LG-P990 using xda premium
tonyp said:
I pulled out my battery like a hundred times. Nothing should happen.
Click to expand...
Click to collapse
but did you also remove the poweroff, before removing the battery, and returned to work?
HerrKuk said:
Open terminal, write:
su
poweroff
Click to expand...
Click to collapse
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?
PlacidoFerreira said:
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?
Click to expand...
Click to collapse
Off course terminal emulator will not help you as you said you deleted those apk files so as tonyp said you should reflash your rom
Sent from my Optimus 2X using xda premium
PlacidoFerreira said:
but did you also remove the poweroff, before removing the battery, and returned to work?
Click to expand...
Click to collapse
No, but I've done way worse things than that
Don't worry, nothing will happen.
And even if you hit the 0.00001% chance and are stuck - luckily we do have NVFlash and can unbrick every softbricked phone.
That's one big advantage of the LG 2x! You need to damage the hardware to brick the phone.
grimmyrippy said:
you should reflash your rom
Click to expand...
Click to collapse
I want to do this. But for flash It is necessary to turn off the phone.
And this is the problem, if I turn off, it will turn on again?
The process "flash" ensure it will turn on again?
tonyp said:
You need to damage the hardware to brick the phone.
Click to expand...
Click to collapse
Oow Gods! xD
How wonderful to know that.
I will go trust in you, and I will make this procedure.
Afterward I post the result
tonyp said:
No, but I've done way worse things than that
Don't worry, nothing will happen.
And even if you hit the 0.00001% chance and are stuck - luckily we do have NVFlash and can unbrick every softbricked phone.
That's one big advantage of the LG 2x! You need to damage the hardware to brick the phone.
Click to expand...
Click to collapse
+1
So dont be afraid there's a lot of here
Sent from my Optimus 2X using xda premium
PlacidoFerreira said:
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?
Click to expand...
Click to collapse
Thats strange, i have always thought that poweroff is an busybox applet (/system/xbin/poweroff), and should work even without poweroff.apk
Just for the fun of it, try
su
reboot
Sent from my LG-P990 using xda premium
HerrKuk said:
i have always thought that poweroff is an busybox applet (/system/xbin/poweroff)
Click to expand...
Click to collapse
I tried reboot, but the apk not returned. It only restarted normally.
There are an .apk and an .odex (poweroff) located in (System/app/)
I will try Reflash.
To Extract .kdz or .bin
Before performing the reflash, is there any way to extract the file .kdz or .bin from firmware I'm using in by Win7? With this, look for poweroff.apk, to extract, and put in my phone.
If it is noobish, then I apologise sincierly, but I have an idea.
Is it not possible to extract from other phone and upload it somewhere for you to put in your phone?
Like for example, would it help if say I (stock/root/ 2.3.4 O2X) get it for you and uploaded to some fileshare thingy?
(My understanding (being new to O2X but long running user of Androids (G1, Milestone 1, O2X) is that no matter what you do to your software, there is always flash, or nandroid bckup, or ROM install. So no worries. )
petr.klos said:
If it is noobish, then I apologise sincierly, but I have an idea.
Is it not possible to extract from other phone and upload it somewhere for you to put in your phone?
Like for example, would it help if say I (stock/root/ 2.3.4 O2X) get it for you and uploaded to some fileshare thingy?
(My understanding (being new to O2X but long running user of Androids (G1, Milestone 1, O2X) is that no matter what you do to your software, there is always flash, or nandroid bckup, or ROM install. So no worries. )
Click to expand...
Click to collapse
Yes that should work. I would have done that myself if I'd use a Stock ROM.
Thread resolved
OK guys,
Just reflash solved the problem.
Thread resolved
Thanks very much to all !!
I try using one of the rooting binaries, and it booted me to touch recovery.
Now, being a traditional recovery person, i had no idea what this is...
Turns out when i try to flash using what i have learned from my old phone, Confirm Install shows only 7 options - all "No"
wtf..
dongimin2 said:
I try using one of the rooting binaries, and it booted me to touch recovery.
Now, being a traditional recovery person, i had no idea what this is...
Turns out when i try to flash using what i have learned from my old phone, Confirm Install shows only 7 options - all "No"
wtf..
Click to expand...
Click to collapse
Scroll it, like a normal touchscreen.
gabwerkz said:
Scroll it, like a normal touchscreen.
Click to expand...
Click to collapse
oh my. thanks!
dongimin2 said:
oh my. thanks!
Click to expand...
Click to collapse
Hahahaha yes you just have to slide your finger up
I had that exact problem when i rooted.
I was about to flip out
But xda saved me from loosing my mind
Use home key..it will turn one of the options into yes
I unlocked my bootloader and everything was fine. Then I installed CM10.1.2 and it loads to the initial Welcome screen (where you select country) but the touch doesn't work at all. The volume and power button works but I can't tap anything.
Also no softbutton shows.
I also tried flashing CM10.1.0 and the latest FXP rom.
If anyone helps solve this it would be so appreciated.
Sounds like you flashed the wrong version for your phone.
Which phone do you have and which cm dud you flash
Sent from my LT30p using xda premium
gregbradley said:
Sounds like you flashed the wrong version for your phone.
Which phone do you have and which cm dud you flash
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
I have an Xperia T and I flashed CM Mint.
ok, try flashing a stock ftf in flashtool to see if touch screen comes back.
If that works redownload the cm mint .zip and try flashing it again.
Let me know how you get on
gregbradley said:
ok, try flashing a stock ftf in flashtool to see if touch screen comes back.
If that works redownload the cm mint .zip and try flashing it again.
Let me know how you get on
Click to expand...
Click to collapse
Okay trying to find an appropriate stock ftf, or does it not really matter?
Like if I had a central european unbranded one or something on my UK Orange phone?
foxyfennec said:
Okay trying to find an appropriate stock ftf, or does it not really matter?
Like if I had a central european unbranded one or something on my UK Orange phone?
Click to expand...
Click to collapse
doesn't matter, just make sure its fir the right phone model or use one of mine from the all in one thread (Its Vodafone, but that does not matter)
gregbradley said:
doesn't matter, just make sure its fir the right phone model or use one of mine from the all in one thread (Its Vodafone, but that does not matter)
Click to expand...
Click to collapse
I flashed yours onto my phone and it loads up but the same problem happens The touchscreen still doesn't work.
I saw this earlier before heading to work: http://forum.xda-developers.com/showpost.php?p=39920703&postcount=11
But when I adb shell I don't get a [email protected] I have some garbled text. Basic commands like ls work. su is not found though, neither is the rmi4_fwloader command found. But then adb devices showed it in "recovery" mode not "device". Though on this computer adb devices shows nothing but fastboot does. Did flashing the stock rom relock it?
Thanks
foxyfennec said:
I flashed yours onto my phone and it loads up but the same problem happens The touchscreen still doesn't work.
I saw this earlier before heading to work: http://forum.xda-developers.com/showpost.php?p=39920703&postcount=11
But when I adb shell I don't get a [email protected] I have some garbled text. Basic commands like ls work. su is not found though, neither is the rmi4_fwloader command found. But then adb devices showed it in "recovery" mode not "device". Though on this computer adb devices shows nothing but fastboot does. Did flashing the stock rom relock it?
Thanks
Click to expand...
Click to collapse
That postwas my next piece of advice to you...
ok, have you unlocked your bootloader? Have you rooted the new firmware? Use bin4ry or doomlords rooting method to root the firware and try again.
also, you can use a USBOTG cable and a mouse to control the phone instead of the touchscreen
gregbradley said:
That postwas my next piece of advice to you...
ok, have you unlocked your bootloader? Have you rooted the new firmware? Use bin4ry or doomlords rooting method to root the firware and try again.
also, you can use a USBOTG cable and a mouse to control the phone instead of the touchscreen
Click to expand...
Click to collapse
The bootloader was still unlocked after putting your firmware on.
Is there a way of enabling usb debug mode outside of the phone? I'm guessing that's what's needed to get adb shell to work.
Woohoo! Progress! Still broken, but progress!!!!
I installed PdaNet and it made adb drivers work. Then I did adb shell from recovery.
This part is important:
The path is messed up on my phone so if anyone has trouble with that method for similar reasons would have to do the same:
Code:
/sbin/su
/system/bin/rmi4_fwloader -b /system/etc/firmware/touch_module_id_0x32.img -d /sys/bus/rmi4/devices/sensor00 -r -f
(echo $PATH is /sbin/ but for some reason su doesn't work without /sbin/. if /sbin/su doesn't work what I actually did was cd /sbin then su)
(It is important to run /system/bin/rmi4_fwloader because it simply can't find rmi4_fwloader, even if you cd /system/bin/)
Now my touch works! I just have no software buttons
Any idea how to get my.. nevermind, after going through the startup bit they just appeared.
Thank you you are a genius!
No problem, Glad its sorted for you now.